Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 9 de 9
Filtrar
Más filtros










Base de datos
Intervalo de año de publicación
2.
Sci Rep ; 5: 14834, 2015 Oct 06.
Artículo en Inglés | MEDLINE | ID: mdl-26437873

RESUMEN

Transition metal oxides are among the most promising solar materials, whose properties rely on the generation, transport and trapping of charge carriers (electrons and holes). Identifying the latter's dynamics at room temperature requires tools that combine elemental and structural sensitivity, with the atomic scale resolution of time (femtoseconds, fs). Here, we use fs Ti K-edge X-ray absorption spectroscopy (XAS) upon 3.49 eV (355 nm) excitation of aqueous colloidal anatase titanium dioxide nanoparticles to probe the trapping dynamics of photogenerated electrons. We find that their localization at Titanium atoms occurs in <300 fs, forming Ti(3+) centres, in or near the unit cell where the electron is created. We conclude that electron localization is due to its trapping at pentacoordinated sites, mostly present in the surface shell region. The present demonstration of fs hard X-ray absorption capabilities opens the way to a detailed description of the charge carrier dynamics in transition metal oxides.

3.
J Phys Condens Matter ; 26(35): 355009, 2014 Sep 03.
Artículo en Inglés | MEDLINE | ID: mdl-25109302

RESUMEN

Synchrotron-based microprobe x-ray absorption spectroscopy (XAS) has been used to study the local atomic structure of chromium in chromia-doped uranium dioxide (UO2) grains. The specimens investigated were a commercial grade chromia-doped UO2 fresh fuel pellet, and materials from a spent fuel pellet of the same batch, irradiated with an average burnup of ~40 MW d kg(-1). Uranium L3-edge and chromium K-edge XAS have been measured, and the structural environments of central uranium and chromium atoms have been elucidated. The Fourier transform of uranium L3-edge extended x-ray absorption fine structure shows two well-defined peaks of U-O and U-U bonds at average distances of 2.36 and 3.83 Å. Their coordination numbers are determined as 8 and 11, respectively. The chromium Fourier transform extended x-ray absorption fine structure of the pristine UO2 matrix shows similar structural features with the corresponding spectrum of the irradiated spent fuel, indicative of analogous chromium environments in the two samples studied. From the chromium XAS experimental data, detectable next neighbor atoms are oxygen and uranium of the cation-substituted UO2 lattice, and two distinct subshells of chromium and oxygen neighbors, possibly because of undissolved chromia particles present in the doped fuels. Curve-fitting analyses using theoretical amplitude and phase-shift functions of the closest Cr-O shell and calculations with ab initio computer code FEFF and atomic clusters generated from the chromium-dissolved UO2 structure have been carried out. There is a prominent reduction in the length of the adjacent Cr-O bond of about 0.3 Å in chromia-doped UO2 compared with the ideal U-O bond length in standard UO2 that would be expected because of the change in effective Coulomb interactions resulting from replacing U(4+) with Cr(3+) and their ionic size differences. The contraction of shortest Cr-U bond is ~0.1 Å relative to the U-U bond length in bulk UO2. The difference in the local chromium environment between fresh and irradiated UO2 is discussed based on the comparison of quantitative structural information obtained from the two chromia-doped fuel samples analyzed.

4.
Talanta ; 115: 986-91, 2013 Oct 15.
Artículo en Inglés | MEDLINE | ID: mdl-24054692

RESUMEN

Plutonium uranium mixed oxide (MOX) fuels are being used in commercial nuclear reactors. The actinides in these fuels need to be analyzed after irradiation for assessing their behaviour with regards to their environment and the coolant. In this work the study of the local occurrence, speciation and next-neighbour environment of curium (Cm) in the (Pu,U)O2 lattice within an irradiated (60 MW d kg(-1) average burn-up) MOX sample was performed employing micro-x-ray fluorescence (µ-XRF) and micro-x-ray absorption fine structure (µ-XAFS) spectroscopy. The chemical bonds, valences and stoichiometry of Cm (≈ 0.7 wt% in the rim and ≈ 0.03 wt% in the centre) are determined from the experimental data gained for the irradiated fuel material examined in its centre and peripheral (rim) zones of the fuel. Curium occurrence is also reduced from the centre (hot) to the periphery (colder) because of the condensation of these volatile oxides. In the irradiated sample Cm builds up as Cm(3+) species (>90%) within a [CmO8](13-) or [CmO7](11-) coordination environment and no (<10%) Cm(IV) can be detected in the rim zone. Curium dioxide is reduced because of the redox buffering activity of the uranium dioxide matrix and of its thermodynamic instability.

5.
Anal Chem ; 83(16): 6259-66, 2011 Aug 15.
Artículo en Inglés | MEDLINE | ID: mdl-21623637

RESUMEN

Quantitative chemical imaging of trace elements in heterogeneous media is important for the fundamental understanding of a broad range of chemical and physical processes. The primary aim of this study was to develop an analytical methodology for quantitative high spatial resolution chemical imaging based on the complementary use of independent microanalytical techniques. The selected scientific case study is focused on high spatially resolved quantitative imaging of major elements, minor elements, and a trace element (Cs) in Opalinus clay, which has been proposed as the host rock for high-level radioactive waste repositories. Laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS), providing quantitative chemical information, and synchrotron radiation based micro-X-ray fluorescence (SR-microXRF), providing high spatial resolution images, were applied to study Cs migration into Opalinus clay rock. The results indicate that combining the outputs achievable by the two independent techniques enhances the imaging capabilities significantly. The qualitative high resolution image of SR-microXRF is in good agreement with the quantitative image recorded with lower spatial resolution by LA-ICPMS. Combining both techniques, it was possible to determine that the Opalinus clay sample contains two distinct domains: (i) a clay mineral rich domain and (ii) a calcium carbonate dominated domain. The two domains are separated by sharp boundaries. The spatial Cs distribution is highly correlated to the distribution of the clay. Furthermore, extended X-ray absorption fine structure analysis indicates that the trace element Cs preferentially migrates into clay interlayers rather than into the calcite domain, which complements the results acquired by LA-ICPMS and SR-microXRF. By using complementary techniques, the quantification robustness was improved to quantitative micrometer spatial resolution. Such quantitative, microscale chemical images allow a more detailed understanding of the chemical reactive transport process into and within heterogeneous media to be gained.

6.
Science ; 323(5913): 489-92, 2009 Jan 23.
Artículo en Inglés | MEDLINE | ID: mdl-19074309

RESUMEN

X-ray absorption spectroscopy is a powerful probe of molecular structure, but it has previously been too slow to track the earliest dynamics after photoexcitation. We investigated the ultrafast formation of the lowest quintet state of aqueous iron(II) tris(bipyridine) upon excitation of the singlet metal-to-ligand-charge-transfer (1MLCT) state by femtosecond optical pump/x-ray probe techniques based on x-ray absorption near-edge structure (XANES). By recording the intensity of a characteristic XANES feature as a function of laser pump/x-ray probe time delay, we find that the quintet state is populated in about 150 femtoseconds. The quintet state is further evidenced by its full XANES spectrum recorded at a 300-femtosecond time delay. These results resolve a long-standing issue about the population mechanism of quintet states in iron(II)-based complexes, which we identify as a simple 1MLCT-->3MLCT-->5T cascade from the initially excited state. The time scale of the 3MLCT-->5T relaxation corresponds to the period of the iron-nitrogen stretch vibration.

7.
J Phys Condens Matter ; 19(31): 315211, 2007 Aug 08.
Artículo en Inglés | MEDLINE | ID: mdl-21694111

RESUMEN

We present, herein, an extended study of the half-Heusler alloy NiMnSb, starting with the deposition technique, continuing with the basic structural and magnetic properties of the thin films, and finishing with the electronic and compositional properties of their surfaces. The experimental methods we apply combine magnetization and magnetoresistivity measurements, atomic force microscopy, ferromagnetic resonance, x-ray and neutron diffraction, low energy electron diffraction, angle resolved x-ray photoemission, extended x-ray absorption fine structure spectroscopy, soft x-ray magnetic circular dichroism and spin polarized inverse photoemission spectroscopy. We find that stoichiometric surfaces exhibit close to 100% spin polarization at the centre of the surface Brillouin zone at the Fermi edge at ambient temperatures. There is strong evidence for a moment reordering transition at around 80 K which marks the crossover from a high polarization state (T<80 K) to a more representative metallic ferromagnetic state (T>80 K). The results from the different experimental techniques are successively reviewed, with special emphasis on the interplay between composition and electronic structure of the NiMnSb film surfaces. Surface segregation, consistent with a difference in free enthalpy between the surface and the bulk, is induced by annealing treatments. This surface segregation greatly reduces the surface polarization.

8.
Opt Express ; 15(9): 5885-92, 2007 Apr 30.
Artículo en Inglés | MEDLINE | ID: mdl-19532848

RESUMEN

High-quality monoclinic planar waveguide crystals of Tm-doped KY(WO(4))(2) were grown by liquid-phase epitaxy with several dopant concentrations and thicknesses. Waveguide lasing in the 2 mum spectral range was demonstrated in the fundamental mode. The maximum continuous-wave output power achieved was 32 mW using a Ti:sapphire laser pump near 800 nm.

9.
Opt Lett ; 31(23): 3450-2, 2006 Dec 01.
Artículo en Inglés | MEDLINE | ID: mdl-17099746

RESUMEN

Fabrication and laser operation of proton-implanted Ti:sapphire buried channel waveguides is reported for the first time to our knowledge. Without any postimplantation annealing of the structures, continuous laser operation near 780 nm was demonstrated at room temperature at an absorbed pump power threshold of 230 mW. Single-transverse-mode laser emission was observed with measured beam propagation factors M(2)(x) and M(2)(y) of 1.5 and 1.2, respectively. An output power of 12.4 mW for 1 W pump power was obtained with an output coupler of 4.6% transmission at the signal wavelength. Higher output powers were measured in waveguides with larger cross sections exhibiting multimode laser emission.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...