Can carbamide peroxide be as effective as hydrogen peroxide for in-office tooth bleaching and cause less sensitivity? A systematic review.

This study aimed to answer the question through a systematic review: Can carbamide peroxide be as effective as hydrogen peroxide and cause less in-office bleaching sensitivity? A literature survey was performed in PubMed/MEDLINE, Embase, Scopus, ISI Web of Science, and gray literature. Primary clinical trials that compared the efficacy or the in-office bleaching sensitivity between carbamide and hydrogen peroxides were included. The risk of bias was evaluated using the RoB2. The certainty of the evidence was assessed using the GRADE approach. DPI training significantly improved the mean scores of the dental undergraduates from 7.53 in the pre-DPI-training test to 9.01 in the post-DPI-training test (p < 0.001). After 6 weeks, the mean scores decreased marginally to 8.87 in the retention test (p = 0.563). DPI training increased their confidence level from 5.68 pre-DPI training to 7.09 post-DPI training. The limited evidence suggests that the 37% carbamide peroxide may be similarly effective to the 35% hydrogen peroxide for bleaching teeth in-office and causes less bleaching sensitivity. However, more well-designed split-mouth clinical trials are necessary to strengthen the evidence.

Addition of substances to reduce the erosive potential of acidic beverages to tooth enamel: A scoping review.

OBJECTIVE: This scoping review aimed (1) to map, analyse, interpret and synthesize data from in situ studies on which substances were added to acidic beverages to reduce the erosive potential on tooth enamel and (2) to establish the level of evidence of the effectiveness of adding substances to acidic beverages to reduce the erosive potential on tooth enamel. DESIGN: This is a scoping review, according to the methods from the Joanna Briggs Institute and PRISMA-ScR, with high-sensitivity searches in the databases PubMed (MEDLINE), Virtual Health Library, Embase (Elsevier), Scopus (Elsevier), Web of Science and ScienceDirect (Elsevier). In situ studies published in English until December 2022 were included. Studies that did not report a control group were excluded. To map and summarize the results, tables and figures were used. RESULTS: From 895 potentially eligible articles, nine were included. Blackcurrant juices (n = 5) with the addition of calcium (n = 3) or xanthan gum (n = 2) formulations were the most tested in terms of reducing the erosive potential of the beverages on tooth enamel. The profilometer was the equipment of choice (n = 8) for evaluating the loss of enamel structure after the experimental tests. CONCLUSIONS: Calcium and xanthan gum are among the most tested by in situ studies, offering promising results in reducing the erosive potential of fruit juices and carbonated and energy drinks.

Influência do tipo de compósito e tempo de exposição aos raios-x na produção de artefatos radiográficos em modelo de restaurações classe II / Influence of the composite type and exposure time to x-rays on the production of radiographic artifacts in a class II restoration model

Aim: To evaluate the effect of the exposure time and the type of composite in the production of radiographic artifact at the tooth / restorative interface. Materials and Methods: In 20 healthy bovine incisors, cavity preparations and class II restorations were made using composite resins Filtek Bulk Fill One (group 1) and Filtek Z350 (group 2). Then, the teeth were exposed to obtain digital radiographs, varying the exposure time by 0.07, 0.10, 0.14, 0.20 and 0.25s. The images were evaluated for investigation of the presence of artifact through the analysis of the modified number of pixels (QPXD) and the average gray value in class II (MGVR) restorations, using the Image J software (National Health Institute). Results: The presence of artifact was observed in all evaluated samples, regardless of the type of restorative material and the exposure time employed. There was no statistically significant difference in QPXD and MGVR between the resins used (ANOVA 2 factors, p p> 0.05). The MGVR analysis indicated that there were no statistically significant differences between resins or between exposure times (p> 0.05). There was a correlation between QPXD and MGVR (r = 0.29) for Filtek Bulk Fill One resin. Discussion: This study reveals the importance of attention to the region of the tooth-restoration interface by the Surgeon-Dentist, who must combine the radiographic findings diagnosed using digital tools to clinical signs in order to compose a unique therapeutic project with a real need for intervention, if there is such need. Conclusion: The presence of altered pixels on dentin in the region of the tooth-restoration interface was identified in all specimens. The variation in the exposure time as well as the type of the restorative composite did not influence the increase or decrease of QPXD and neither in MGVR. However, there was a correlation between QPXD and MGVR for Filtek Bulk Fill One resin.

Objetivo: Avaliar o efeito do tempo de exposição e do tipo de compósito na produção de artefato radiográfico na interface dente/material restaurador. Materiais e Métodos: Em 20 incisivos bovinos hígidos foram feitos preparos cavitários e restaurações classe II utilizando resinas compostas Filtek Bulk Fill One (grupo 1) e a Filtek Z350 (grupo 2). Em seguida, os dentes foram expostos para obtenção das radiografias digitais, variando o tempo de exposição em 0,07, 0,10, 0,14, 0,20 e 0,25s. As imagens foram avaliadas para investigação da presença de artefato através da análise do número de pixels modificado (QPXD) e do valor médio de cinza nas restaurações de classe II (MGVR), utilizando o software Image J (Instituto Nacional de Saúde, Bethesda, MD, EUA). Resultados: Observou-se a presença de artefato em toda amostra avaliada, independente de tipo de material restaurador e tempo de exposição empregado. Não se observou diferença estatisticamente significativa na QPXD e nos MGVR entre as resinas utilizadas (ANOVA 2 fatores, p p>0,05). A análise do MGVR indicou que não houve diferenças estatisticamente significativas entre as resinas nem entre os tempos de exposição (p>0,05). Observou-se uma correlação entre a QPXD e o MGVR (r=0,29) para a resina Filtek Bulk Fill One. Discussão: Como significado clínico, o presente estudo revela a importância da atenção à região da interface dente-restauração por parte do Cirurgião-Dentista, o qual deve aliar os achados radiográficos diagnosticados com o auxílio de ferramentas digitais aos sinais clínicos, para compor um projeto terapêutico singular com uma real necessidade de intervenção, caso haja. Conclusão: Foi identificado a presença de pixels alterados sobre a dentina na região da interface dente-restauração em todos os corpos de prova. A variação do tempo de exposição como também o tipo do compósito restaurador não influenciou no aumento ou diminuição do QPXD e nem tão pouco no MGVR. Contudo houve correlação entre o QPXD e o MGVR para a resina Filtek Bulk Fill One.

In silico affinity between analgesic/anti-inflammatory drugs and the transient receptor potential A1 to predict potential pharmacological managing approaches for bleaching sensitivity.

Reducing in-office tooth bleaching sensitivity represents a challenge for professionals. Researchers have associated the block of the pain receptor TRPA1 with reducing bleaching sensitivity. However, the chemical affinity of analgesic/anti-inflammatory drugs to the TRPA1 needs to be verified. To perform a virtual screening of multiple drugs (analgesic and anti-inflammatory drugs) to verify chemical affinity for the TRPA1 receptor. The crystal structure of the TRPA1 receptor proteins was retrieved from the Protein Data Bank. The SMILES codes of the ligands were extracted from PubChem. The binding energy of the complex was obtained in ∆G - kcal/mol by AutoDock Vina© and replicated in the webservers SwissDock©, Dockthor©, and CbDock©. LigPlus© confirmed the binding sites. Codeine and dexamethasone showed regularity among all servers, even showing binding energy values of -7.9 kcal/mol for codeine and -8.1 kcal/mol for dexamethasone. Codeine and dexamethasone may be potential drugs to manage tooth bleaching sensitivity if they reach the dental pulp TRPA1 receptor.

Are polywave light-emitting diodes more effective than monowave ones in the photoactivation of resin-based materials containing alternative photoinitiators? A systematic review.

OBJECTIVE: This systematic review aimed to analyze if using polywave light-emitting diodes (LED) to photoactivate resin-based materials (resin composites, adhesive systems, and resin cements) containing alternative photoinitiators provide better physicochemical properties than monowave ones. MATERIAL AND METHODS: Inclusion criteria were in vitro studies that evaluated the degree of conversion, microhardness and flexural strength in resin-based materials containing alternative photoinitiators and light-activated with mono and polywave LEDs. Exclusion criteria were studies that evaluated the physicochemical properties of composites through any material interposed between the LED and the resin composite and studies that exclusively compared different modes and/or light activation times. Selection of studies, data extraction, and risk-of-bias analysis was performed. Data from selected studies were qualitatively analyzed. A systematic search was performed in June 2021 using PubMed/Medline, Embase, Scopus, and ISI Web of Science databases and grey literature without language restriction. RESULTS: A total of 18 studies were included in the qualitative analysis. Nine studies used diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide (TPO) as an alternative photoinitiator for resin composite. Polywave LED improved the degree of conversion of resin composite compared to monowave in 9 of the included studies. Polywave LED improved the microhardness of resin composite compared to monowave in 7 of the included studies. Polywave LED improved the degree of conversion for 11 studies and microhardness of resin composite compared to monowave for 7 included studies. No differences in the flexural strength medium between poly and monowave LEDs were observed. The evidence was graded as low quality due to the high risk of bias for 11 studies. CONCLUSION: The existing studies, with their limitations, revealed that the polywave light-emitting diode maximizes activation, resulting in a higher degree of double-bond conversion and microhardness of resin composites containing alternative photoinitiators. However, the flexural strength of these materials is not influenced by the type of light activation device.

A systematic scoping review of color evaluation methods of recently published tooth bleaching clinical trials.

PURPOSE: This systematic scoping review aimed to survey the literature to answer the following questions: which instruments were used to measure the color change; which teeth were assessed for color; what was the follow-up period, and in which country was the recently published tooth bleaching clinical trial performed? METHODS: This research was registered in the Open Science Framework. The following databases were searched: PubMed, Scopus, Web of Science, EMBASE, Cochrane Library, and LILACS. Randomized clinical trials evaluating tooth bleaching with color change analysis, published between 2021 and 2017, were included. The data extracted from included studies were analyzed using a qualitative and descriptive analysis. RESULTS: 106 articles were analyzed. Most studies used only ΔEab to measure the color change (10.4%), assessed the color change in the maxillary central incisors (45.3%), and included a one-month follow-up (25.4%). The published papers were mostly from research performed in Brazil (51.9%). Many methods have been used in the tooth bleaching clinical trials examined, and a wide variety of instruments used to measure the color change was observed. CLINICAL SIGNIFICANCE: The large variation in the methodology criteria of most recent tooth bleaching clinical trials makes data comparison difficult among different studies and raises the need for a guideline for tooth bleaching clinical studies.

Bottom/top hardness ratio and dentin bonding stability of conventional and bulk-fill resin composites

Aim: To evaluate the bottom/top hardness ratio (B/T) and the dentin bonding stability of conventional and bulk-fill resin composites in high c-factor preparations. Methods: Regular conventional (Tetric N-Ceram ­ TNC, and Polofil Supra ­ PFS), regular bulk-fill (Tetric N-Ceram Bulk fill ­ TBF, and Admira Fusion X-tra ­ AFX), and low viscosity bulk-fill resin composites (Tetric N-flow ­ TNF, and X-tra Base ­ XTB) were used to restore 180 dentin conical preparations. The specimens were randomly distributed in 12 groups (n = 15) according to the resin composites and storage time-points (24 h and six months) tested. After 24 h storage, all specimens were subjected to the bottom/top hardness ratio analysis. Then, the push-out bond strength test was performed in half of the specimens and the other half were maintained for six months on water storage before testing. The failure modes were analyzed in a stereomicroscopic. The data were analyzed statistically using one- and two-way ANOVA and Tukey post-test (p <0.05). Results: There were no statistically significant differences for the bottom/top hardness ratio among the resin composites (p>0.05). Regardless of the storage timepoint, regular bulk-fill resin composites showed the highest bond strength values statistically (p<0.05). Only conventional resin composites showed statistically lower bond strength values at six-month storage (p<0.05). Adhesive failures were more predominant for low-viscosity bulk-fill resin composites. Conclusion: Although the DoC was not affected by different materials tested, only bulk-fill resin composites did not present dentin bond strength loss after six-month of water storage

Dual-cured adhesive system improves adhesive properties of dentin cavities restored with a bulk-fill resin composite

Aim: To evaluate the impact of a dual-cured adhesive system on the in situ degree of conversion (DC), bond strength (BS) and failure mode (FM) of adhesive interfaces in dentin cavities restored with a bulk-fill resin composite. Methods: 4-mm-deep dentin cavities with a 3.1 C-factor were created in 68 bovine incisors (n = 17 per group). The lightcured (Scotchbond™ Universal) or the dual-cured (Adper™ Scotchbond™ Multi-purpose Plus) adhesive system was applied to the cavities, which were then restored with a bulkfill resin composite (Filtek™ Bulk Fill). In situ DC analysis was performed by means of micro Raman spectroscopy at the top and bottom interfaces. Push-out BS was measured in a universal testing machine after 24-h or 6-month water storage. FM was determined with a stereomicroscope. Data of in situ DC and BS were analyzed by two-way analysis of variance (ANOVA) and Tukey test (p<0.05), while the FM was analyzed descriptively. Results: The groups that received the dual-cured adhesive system showed statistically higher in situ DC and BS than those that received the light-cured adhesive system. Cohesive failure mode was the most frequent in all conditions. Conclusion: In situ DC and BS were influenced by the curing strategies of the adhesive systems with better performance of the dual-cured material

Functional Ability of Dental Materials After Inclusion of Nanocarriers Containing Functional Substances: A Systematic Review.

BACKGROUND: Nanocarriers are nanoparticles used to transport functional substances. OBJECTIVE: This study aimed to perform a systematic review analyzing the functional ability of dental materials after the inclusion of nanocarriers containing functional substances. MATERIALS AND METHODS: We searched PubMed, Web of Science, EMBASE, SciELO, and Science Direct from (02/03/21) to (02/06/21) without restriction on the year of publication. We included studies evaluating the incorporation of Chitosan, PEG-PCL (poly(ethylene glycol)-poly(ε-caprolactone), PLGA (poly(lactic-co-glycolic acid), and mesoporous silica into dental materials. We analyzed the risk of bias with CRIS guidelines and consolidated all analyses using Microsoft Office Excel. RESULTS: In total, we found 656 studies and included 11. The articles investigated materials to eliminate microorganisms, interference with materials' mechanical properties, elution of remineralizing substances, and reduction of oral anesthetic toxicity. Chitosan and mesoporous silica were the most prevalent nanocarriers. Among all properties, the antibacterial activity was the most analyzed. The functional ability of dental materials provided by all nanocarriers improved. CONCLUSION: The use of nanocarriers may be a useful way to produce dental materials with improved functional abilities. We registered this manuscript in the Open Science Framework platform - DOI 10.17605/OSF.IO/RP5XK, available at https://osf.io/qg49x.

Direct and semi-direct resin composite restoration in large cavity preparations: analysis of dentin bond strength stability and bottom/top microhardness ratio in a cavity model.

To evaluate the influence of the restorative approach and aging time on dentin bond strength (BS), failure mode (FM), and bottom/top microhardness ratio (B/T) in a large dentin cavity model. A total of 102 bovine incisors were used to produce models of conical dentin cavities (4.0 mm thickness × 4.8 mm top diameter × 2.8 mm bottom diameter), which were restored using semi-direct filling (SDF) (Filtek™ Z250 XT + Scotchbond™ Universal/RelyX™ Ultimate luting system), direct bulk filling (DBF) (Filtek™ One Bulk Fill), and direct incremental filling (DIF) (Filtek™ Z250 XT) techniques. B/T, BS, and FM (n = 17) were analyzed in a microhardness tester, a universal testing machine, and a stereomicroscope, respectively, after 24 h and 6 months of water storage. BS and B/T data were analyzed using two-way ANOVA/Tukey post-hoc test (p < 0.05), while FM data were analyzed descriptively. There was a statistically significant difference in BS between the restorative techniques, and BS was influenced by aging time in the DBF and SDF groups. Mixed failure was predominant for the SDF technique in both aging times. There was no statistically significant difference in B/T among the restorative approaches regardless of the aging time (p > 0.05). Although all restorative approaches provided similar B/T, the semi-direct technique showed better performance on the material bond strength to dentine in large cavities.

Can sterilization methods influence surface properties of resin composites? A purpose for previewing bias in laboratory bacterial adhesion tests.

This study aimed to evaluate the influence of sterilization methods on conventional and bulk-fill resin composites' (BFRCs) surface properties in an attempt to preview bias in laboratory bacterial adhesion tests. Two regular viscosity conventional resin composites [Filtek Z350 XT™ (Z350) and IPS Empress Direct™ (ED)] and two regular viscosity BFRCs [Filtek Bulk Fill™ (FILT) and Tetric N-Ceram Bulk Fill IVA™ (TBF)] were used. The materials were characterized by Scanning Electron Microscopy (SEM), surface roughness (SR), and wettability (W) after sterilization with hydrogen peroxide gas plasma (HPGP) and steam sterilization (SS). Nonsterilized samples served as a control group (n = 5). Statistical analysis was performed using two-way analysis of variance (ANOVA) and Tukey post hoc test (p < 0.05). For SR, there were no statistically significant differences among the groups (p > .05). SS method decreased the contact angle for FILT and Z350 (p < .01). The SS promoted more exposition of filler particles, while the HPGP method did not alter the tested materials' morphology. Therefore, sterilization methods affected the resin composites tested selectively. HPGP seems to be the most recommended method to sterilize the tested resin composites before laboratory bacterial adhesion tests.

Incorporation of a polymerization catalyst for improved mechanical behavior and physicochemical characteristics of a light-cured pulp capping material / Incorporação de um catalisador de polimerização para aprimorar propriedades mecânicas e fisíco-químicas de um protetor pulpar fotoativável

Objective: To evaluate the influence of the incorporation of a polymerization catalyst to a light-cured pulp capping material on mechanical behavior and physicochemical characteristics. Material and Methods: Different percentages (2 wt%, and 4 wt%) of diphenyliodonium hexafluorophosphate (DPI) were incorporated into the Ultra-Blend Plus, a resin-modified calcium-based cement. The material without incorporation of DPI (0 wt%) served as control. Degree of Conversion (DC), Flexural Strength (FS), Elastic Modulus (EM), Water Sorption (WSp), Solubility (Sl), and pH of eluate at 24-h, 72-h, and 7-day storage times were measured. One-way ANOVA/Tukey posthoc tests were used to analyze the data (p <0.05). Results: For DC, FS, and EM, materials with different % of DPI showed statistically significant differences, so that 0% provided the lowest values and 2% the highest values. Materials with 0% and 2% of DPI provided statistically the lowest WSp, whilst material with 0% of DPI showed statistically the highest Sl. Conclusion: All materials provided statistically similar pH to eluates regardless of storage time, although only materials with DPI at 2% and 4% maintained pH of eluates statistically similar from 72 h to 7 days storage times.(AU)

Objetivo: avaliar a influência nas propriedades mecânicas e físico-químicas da incorporação de um catalisador de polimerização a um protetor pulpar fotoativável. Material e Métodos: foram adicionadas diferentes porcentagens em massa (2% e 4%) de hexafluorofosfato de difeniliodônio (DPI) ao Ultra-Blend Plus, um cimento à base de hidróxido de cálcio modificado por resina. O material sem a adição do DPI (0%) serviu como controle. Foram avaliados: Grau de Conversão (DC), Resistência Flexural (FS), Módulo de Elasticidade (EM), Sorção (WSp), Solubilidade (SI) e o pH do eluato nos tempos de 24h, 72h e 7 dias de armazenamento. ANOVA 1-way com pós-teste de Tukey (p <0.05). Foi utilizado para avaliar os resultados estatisticamente. Resultados: Os materiais com diferentes % de DPI apresentaram diferenças significativas para os testes de DC, FS e EM. A porcentagem em massa de 0% de DPI mostrou valores inferiores a todos os testados e os materiais com adição 2% apresentaram a melhor performance. Materiais com 0% e 2% de DPI apresentaram valores inferiores de WSp; a porcentagem de 0% proporcionou valores estatisticamente maiores para SI. Conclusão: Todos os materiais testados apresentaram pH semelhante nos eluatos independente do tempo de armazenamento, contudo, apenas os materiais com 2% e 4% mantiveram o pH dos eluatos estatisticamente similares nos tempos de estocagem de 72h a 7 dias.(AU)

Effect of Spondias mombin L. extract on the wettability, roughness, color and morphology of bovine enamel

Although Spondias mombin L. extract has an excellent antimicrobial effect against oral microorganisms, it should be clarified how it affects enamel surface properties. Aim: To evaluate the color change, wettability/contact angle, surface roughness and morphology of bovine enamel submitted to the Spondias mombin L. extract. Methods: Thirty bovine teeth were distributed into the following groups: 0.12% chlorhexidine digluconate, 1:32 Spondias mombin L. extract and distilled water. Color change (CC) was evaluated after immerging specimens into the solutions for 14 days. Surface roughness (Ra) was measured using a roughness meter; wettability/contact angles (CA) were determined by the sessile drop method, and scanning electron microscopy images were obtained to characterize the morphology (SMA). The pH of the solutions was evaluated using a pHmeter. The Ra, CA, and CC data were parametric (Kolmogorov-Smirnov; p>0.05). Two-way ANOVA (for Ra and CA) and one-way ANOVA (for CC) with Tukey's posthoc tests at a significance level of 5% were used. SMA was analyzed descriptively. Results: The Spondias mombin L. extract revealed an acidic pH, and when in contact with the bovine teeth, it increased the wettability, but it did not cause statistically significant differences in the Ra. Spondias mombin L. extract caused the highest color change. The SEM images showed differences in the specimens' surface submitted to the extract compared to the other groups. Conclusion: Spondias mombin L. extract provided negative effects on bovine enamel's surface, including a high color change and a more wettable substrate

Effects of ionizing radiation on surface properties of current restorative dental materials.

To investigate the impact of radiotherapy on surface properties of restorative dental materials. A conventional resin composite-CRC (Aura Enamel), a bulk-fill resin composite-BFRC (Aura Bulk-fill), a conventional glass ionomer cement-CGIC (Riva self cure), and a resin-modified glass ionomer cement-RMGIC (Riva light cure) were tested. Forty disc-shaped samples from each material (8 mm diameter × 2 mm thickness) (n = 10) were produced according to manufacturer directions and then stored in water distilled for 24 h. Surface wettability (water contact angle), Vickers microhardness, and micromorphology through scanning electron microscopy (SEM) before and after exposition to ionizing radiation (60 Gy) were obtained. The data were statistically evaluated using the two-way ANOVA and Tukey posthoc test (p < 0.05). Baseline and post-radiation values of contact angles were statistically similar for CRC, BFRC, and RMGIC, whilst post-radiation values of contact angles were statistically lower than baseline ones for CGIC. Exposition to ionizing radiation statistically increased the microhardness of CRC, and statistically decreased the microhardness of CGIC. The surface micromorphology of all materials was changed post-radiation. Exposure to ionizing radiation negatively affected the conventional glass ionomer tested, while did not alter or improved surface properties testing of the resin composites and the resin-modified glass ionomer cement tested.

A comprehensive review of the antibacterial activity of dimethylaminohexadecyl methacrylate (DMAHDM) and its influence on mechanical properties of resin-based dental materials.

The repetitive restorative cycle should be avoided, aiming at the smallest number of restorations' replacements to ensure greater tooth longevity. Antibacterial materials associated with the control of caries etiological factors can help improve restoration's durability. This review aimed to analyze the results of in vitro studies that added Dimethylaminohexadecyl methacrylate (DMAHDM), an antibacterial monomer, to restorative materials. The PubMed, SCOPUS, Web of Science, and Biblioteca Virtual em Saúde databases were screened for studies published between 2015 and 2020. After full-text reading, 24 articles were included in the final sample. DMAHDM has demonstrated antibacterial efficacy against several bacteria related to dental caries and periodontal diseases, causing a transition in the biofilm balance without inducing resistance. When DMAHDM was included in acrylic resin, the material cytotoxicity increased, and changes in mechanical properties were observed. In contrast, resin composites had their mechanical properties maintained in most studies; however, toxicity was not examined. The association between DMAHDM and 2-methacryloyloxyethyl phosphorylcholine or silver nanoparticles improved the antibacterial effect. Besides, the association with nanoparticles of amorphous calcium phosphate or nanoparticles of calcium fluoride can provide remineralization capacity. There is a lack of information on the cytotoxicity and bacteria resistance induction, and further studies are needed to address this.

The combined use of systemic analgesic/anti-inflammatory drugs and a bioactive topical desensitizer for reduced in-office bleaching sensitivity without jeopardizing the hydrogen peroxide efficacy: a randomized, triple blinded, split-mouth clinical trial.

OBJECTIVE: To evaluate the effect of combined systemic administration of paracetamol 500 mg/codeine phosphate 30 mg (PACO) and postoperative topical application of a bioactive desensitizer on in-office bleaching sensitivity and tooth color change. MATERIALS AND METHODS: A randomized, triple-blind, split-mouth clinical trial was conducted. Forty volunteers ingested PACO (n = 20) or placebo (PLA) (n = 20). Their left/right hemiarches received topical application of a bioactive desensitizer [Nano-P™(NP)] and prophylactic paste (PAS), generating four treatment approaches: PACO/NP, PACO/PAS, PLA/NP, and PLA/PAS. Two bleaching sessions (35% hydrogen peroxide) were performed, and the PAS/NP were applied after the procedure. Sensitivity was obtained since the first bleaching session up to 7 days post-bleaching. The color change was evaluated using CIEDE2000 and whiteness index parameters up to 7 days post-bleaching. Data were analyzed using one- and two-way ANOVA/Tukey post hoc tests (p < 0.05). RESULTS: The PLA/PAS showed a sensitivity average of at least two times higher than the PACO/NP. The treatment approaches promoted statistically similar bleaching patterns (p > 0.05). CONCLUSION: The combined approach of systemic administration of PACO and postoperative topical application of NP reduced the level of in-office bleaching sensitivity without jeopardizing hydrogen peroxide efficacy. CLINICAL RELEVANCE: Professionals can adopt the combined approach of systemic administration of analgesic/anti-inflammatory drugs and topical application of a bioactive desensitizer for decreased bleaching sensitivity caused by 35% hydrogen peroxide in-office.

Efficacy, longevity, and bleaching sensitivity of carbamide and hydrogen peroxides for in-office bleaching: A 6-month randomized, double blind, split-mouth clinical trial.

PURPOSE: To evaluate the efficacy, longevity, and bleaching sensitivity of in-office bleaching with 37% carbamide (CP) and 35% hydrogen peroxides (HP). METHODS: 45 volunteers were enrolled in this randomized, double blind, controlled, split-mouth clinical trial with a 6-month follow-up. Left and right hemiarches were randomly selected to receive CP or HP in-office bleaching. Three 40-minute applications of both bleaching agents were performed once a week at the same time. Tooth shade and bleaching sensitivity were recorded before and after bleaching sessions, 1 to 7 days after bleaching sessions and up to 6 months after the last bleaching session using, respectively, a shade guide and Visual Analogue Scale (VAS). Color change, global immediate sensitivity - GIS (sum of sensitivity levels reported during three bleaching sessions), trans- and post-bleaching sensitivity were obtained and analyzed using paired Student t-test and two-way ANOVA/Tukey post-hoc tests (P< 0.05). RESULTS: HP had statistically higher global immediate sensitivity than CP. CP showed statistically lower sensitivity levels during bleaching sessions and in two subsequent days than HP. CP and HP provided statistically similar tooth shade at the end of the last bleaching session and 3 and 6 months after the last bleaching session. CLINICAL SIGNIFICANCE: In-office tooth bleaching using CP resulted in less bleaching sensitivity than HP, without compromising efficacy and longevity over a 6-month follow-up period. The use of 37% carbamide peroxide in substitution for 35% hydrogen peroxide can promote an effective, long-lasting, and more comfortable in-office tooth bleaching for patients.

Relationship of Porphyromonas gingivalis and Alzheimer's disease: a systematic review of pre-clinical studies.

OBJECTIVES: This study aimed to analyze the following PICO question: Are animals infected with Porphyromonas gingivalis (P. gingivalis) or bacterial lipopolysaccharide (Pg-LPS) more affected by neurodegeneration, similar to the pathogenesis generated by Alzheimer's disease (AD), compared with non-infected animals? METHODS: Databases PubMed, Lilacs, SciELO, Science Direct, Scopus, Web of Science, and Cochrane were searched for pre-clinical in vivo studies in which mice were infected with P. gingivalis or received Pg-LPS, in order to assess the brain tissue and cognitive impairment. No limit for date or publication language was imposed and this study was registered at the International Prospective Register of Systematic Reviews (PROSPERO), with nine articles included. Syrcle's protocol was used to evaluate bias in the selected studies. RESULTS: Nine articles were included. Infection by P. gingivalis or the administration of Pg-LPS increased the production of the inflammatory mediators, TNF-α (tumor necrosis factor-alpha), IL-6 (interleukin-6), and IL-1ß (interleukin-1beta), augmented Aß (amyloid beta) production, and activated the complement system, causing inflammation, brain tissue degeneration, and cognitive impairment, consistent with the damage in AD. CONCLUSIONS: Infection by P. gingivalis and Pg-LPS administration appears to be in relation with the pathogenesis of AD by activating the complement cascade, increasing Aß production and augmenting pro-inflammatory cytokine expression, causing age-dependent brain inflammation, neuroinflammation, and neurodegeneration. CLINICAL RELEVANCE: Taking into account the importance of holistic treatment in the dental office, this study focuses on identifying highly prevalent oral diseases, such as periodontal disease, as risk factors for the aggravation of degenerative diseases in the elderly population.

Técnica minimamente invasiva em lesão branca hipoplásica: relato de caso / Minimally invasive technique in hypoplastic white injury: case report / Técnica minimamente invasiva en lesiónblancahipoplástica: caso clínico

Introdução:As manchas dentárias, dentre elas a hipoplasia do esmalte,corresponde a um dos motivos que fazem com que os pacientes busquem alterações no seu sorriso.O tratamento proposto deve ser sempre o mais conservador possível e buscar devolver a autoestima do paciente. Objetivo:Este trabalho objetivou apresentarum relato de caso clínico de paciente do sexo feminino, 26 anos, insatisfeita com a estética do seu sorriso por apresentar dentes escurecidos e hipoplasia de esmalte na face vestibular, em incisivo superior.Descrição do caso:Ao exame clínico foi observado escurecimento fisiológico e hipoplasia de esmalte no incisivo lateral superior esquerdo (22).O plano de tratamento proposto foi clareamento dental pela técnica associada (técnica de consultório + técnica caseira), remoção da mancha hipoplásica de formaminimamente invasiva e restauração em resina composta direta. Conclusões:Através de um correto diagnóstico, associado a uma técnica e seleção de material adequado, foi possível conseguir excelência estética com preservação de estrutura dentária sadia (AU).

Introduction:Dental stains, including enamel hypoplasia, correspond to one of the reasons that make patients seek changes in their smile. The proposed treatment should always be as conservative as possible and seek to restore the patient's self-esteem.Objective:This study aimedto present a clinical case report of a 26-year-old female patient, dissatisfied with the aesthetics of her smile as she had darkened teeth and enamel hypoplasia on the vestibular face, in anupper incisor. Case description:On clinical examination, physiological darkening and enamel hypoplasia were observedon the left upper lateral incisor (22). The proposed treatment plan was dental bleaching using the associated technique (In-office bleaching+ at-home bleaching), removal of the hypoplastic stain in a minimally invasive manner and restoration in direct composite resin.Conclusions:Through a correct diagnosis, associated with a technique and selection of suitable material, waspossible to achieve aesthetic excellence with preservation of healthy dental structure (AU).

ntroducción: Las manchas dentales, incluida la hipoplasia del esmalte, corresponden a una de lasrazones que hacenquelos pacientes busquencambios em susonrisa. El tratamiento propuestosiempredebe ser lo másconservador posible y tratar de restablecerla autoestima del paciente.Objetivo: Este estudio tuvo como objetivo presentarun informe de caso clínico de una paciente de 26 años de edad, insatisfechacon la estética de susonrisa, ya que habíaoscurecidolosdientes y la hipoplasia del esmalte en lasuperficie vestibular, en el incisivo superior.Descripcióndel caso: Enelexamen clínico, se observó oscurecimiento fisiológico e hipoplasia del esmalte en el incisivo lateral superior izquierdo (22). El plan de tratamiento propuestofueel blanqueamiento dental utilizando la técnica asociada (técnica de consultorio + técnica casera), eliminación de la mancha hipoplásica de maneramínimamente invasiva y restauraciónen resina compuestadirecta. Conclusiones: A través de un diagnóstico correcto, asociado con una técnica y selección de material adecuado, fueposible lograr laexcelencia estética conlapreservación de una estructura dental sana (AU).

Bonding performance and mechanical properties of flowable bulk-fill and traditional composites in high c-factor cavity models.

OBJECTIVES: The aim of this study is to evaluate bond strength (BS), shrinkage stress (SS), flexural strength (FS), and elastic modulus (E) of three flowable bulk fill in comparison with conventional composites. MATERIALS AND METHODS: Three bulk fill (Filtek Bulk Fill Flow, Surefil SDR, X-tra Base) and three conventional composites (Filtek Z250 XT, Grandioso, Dentsply TPH3) were used. For BS, conical cavities (n = 10) were prepared in bovine dentine and restored with materials and were analyzed through push-out test in a universal testing machine (UTM). For FS/EM, 60 (n = 10) bar specimens (7 mm × 2 mm × 1 mm) were prepared and evaluated with a UTM. SS was measured in UTM coupled to an extensometer (n = 5). The data were statistically evaluated using one-way ANOVA/Tukey tests (P < 0.05). RESULTS: Conventional composites showed higher E when compared to bulk-fill composites. Regarding FS, they showed similar results, except for (XBF) Xtra Bulk Fill that was inferior. SS and BS of bulk-fill composites were significantly lower and higher than conventional composites, respectively, except for XBF, which showed similar BS to conventional ones. CONCLUSIONS: Flowable bulk-fill composites, except XBF, showed higher BS, lower SS, similar FS, and lower E when compared to conventional ones.