RESUMEN
The aim of this work was to develop active packaging based on polypropylene (PP) and polylactic acid (PLA) matrices using a high value by-product extracted from orange peel as an active compound for food packaging applications. Different films with and without orange peel extract (OPE) based on PP and PLA were obtained via cast extrusion and characterized in terms of their mechanical, thermal, optical, and sealing properties. The films obtained were transparent, but when OPE was incorporated, the transmittance spectrum decreased, causing slight coloration. Mechanical properties were affected by the incorporation of OPE, as elongation at break and tensile strength increased in the cross-direction of the PP film, although the main differences found were related to the polymer itself. In addition, sealing strength also increased via the incorporation of OPE in the PP matrix. However, thermal properties were not affected by OPE in the PP matrix but slightly decreased stability in PLA. Regarding antimicrobial activity in in vitro studies, no inhibition of the growth of Listeria innocua, Saccharomyces cerevisiae, Aspergillus niger, or Escherichia coli was observed. Finally, antioxidant activity was observed in in vitro studies with 2,2-Diphenyl-1picrylhydrazyl (DPPH) radical. The results of this study showed that the obtention of materials with OPE incorporated into the PLA and PP matrix is feasible. The new materials obtained can be used for applications of oxidation-sensitive fresh products.
RESUMEN
This research aimed to develop new hazelnut and pumpkin seed oil-based creams and to assess the effect of different fat and sugar phases on the structure and physical properties of those creams at different refining degrees. In this study, three novel spreadable creams were prepared in a stirred ball-mill: CBS with cocoa butter, pumpkin seed oil and saccharose; OS with pumpkin seed oil and carnauba wax-basedoleogel and saccharose; OLS with oleogel, saccharose and Lucuma powder. OS and CBS creams reached a D90 value lower than 30 µm at 150 min of refining, the OLS cream showed the highest D90 value, with a particle size distribution and a rheological behaviour little affected by the refining time. The OS and CBS creams differed in yield stress, indicating that the attractive particle-particle interactions are affected not only by the particle size, but also by fat composition. Moreover, all the creams showed solid-like behaviour and a good tolerance to deformation rate, a high oil-binding capacity and a good physical stability. Thus, it is possible to reformulate spreadable creams with healthier nutritional profiles.
RESUMEN
This study aimed to understand the effect of fatty acid composition and viscosity of vegetable oils on network formation mechanism and physical properties of oleogels. To this purpose, 12 oleogels were prepared, by choosing 6 seed oils and two waxes, at a fixed oleogelator concentration (6%). The modified Avrami model correctly describes the crystallization profile (R2 > 0.98) and the oil type did not affect the Avrami index that ranged from 1.00 to 1.43. Independently from oleogelator, rice and hemp seed oils followed a 3-D network formation mechanism, while almond oil a 2-D mechanism. The strength and yield stress of carnauba wax oleogels increased with increasing saturated fatty acid amount, while in beeswax-based oleogels a more interconnected structure was associated with the length of the saturated fatty acid chain. Thus, the oleogels formation mechanism was closely related to the chemical composition of the solvent, even in highly monounsaturated or polyunsaturated oils.
