Temperature influences desiccation resistance of bumble bees.

Ongoing climate change has increased temperatures and the frequency of droughts in many parts of the world, potentially intensifying the desiccation risk for insects. Because resisting desiccation becomes more difficult at higher temperatures and lower humidity, avoiding water loss is a key challenge facing terrestrial insects. However, few studies have examined the interactive effects of temperature and environmental humidity on desiccation resistance in insects. Such studies on bees (Hymenoptera: Apoidea: Anthophila) are especially rare, despite their ecological and economic importance. Here, we crossed temperature (20, 25, and 30 °C) with humidity (<5, 50, >95 % RH) manipulations and measured time to mortality, water loss rates, and the water content at mortality of bumble bees (Bombus impatiens). We found that both higher temperature and lower humidity increased water loss rates, while warmer temperatures reduced survival time and lower humidity decreased water content at mortality. Additionally, we observed large intraspecific variation in water balance traits between colonies, and larger individuals survived longer and could tolerate more water loss before mortality. This study raises important questions about the mechanisms underpinning water loss in bumble bees and suggests that frequent access to nectar may be especially important for bumble bees' water balance and survival in a warming and drying climate.

Shared Features Underlying Compact Genomes and Extreme Habitat Use in Chironomid Midges.

Nonbiting midges (family Chironomidae) are found throughout the world in a diverse array of aquatic and terrestrial habitats, can often tolerate harsh conditions such as hypoxia or desiccation, and have consistently compact genomes. Yet we know little about the shared molecular basis for these attributes and how they have evolved across the family. Here, we address these questions by first creating high-quality, annotated reference assemblies for Tanytarsus gracilentus (subfamily Chironominae, tribe Tanytarsini) and Parochlus steinenii (subfamily Podonominae). Using these and other publicly available assemblies, we created a time-calibrated phylogenomic tree for family Chironomidae with outgroups from order Diptera. We used this phylogeny to test for features associated with compact genomes, as well as examining patterns of gene family evolution and positive selection that may underlie chironomid habitat tolerances. Our results suggest that compact genomes evolved in the common ancestor of Chironomidae and Ceratopogonidae and that this occurred mainly through reductions in noncoding regions (introns, intergenic sequences, and repeat elements). Significantly expanded gene families in Chironomidae included biological processes that may relate to tolerance of stressful environments, such as temperature homeostasis, carbohydrate transport, melanization defense response, and trehalose transport. We identified several positively selected genes in Chironomidae, notably sulfonylurea receptor, CREB-binding protein, and protein kinase D. Our results improve our understanding of the evolution of small genomes and extreme habitat use in this widely distributed group.

Disentangling the drivers of decadal body size decline in an insect population.

While climate warming is widely predicted to reduce body size of ectotherms, evidence for this trend is mixed. Body size depends not only on temperature but also on other factors, such as food quality and intraspecific competition. Because temperature trends or other long-term environmental factors may affect population size and food sources, attributing trends in average body size to temperature requires the separation of potentially confounding effects. We evaluated trends in the body size of the midge Tanytarsus gracilentus and potential drivers (water temperature, population size, and food quality) between 1977 and 2015 at Lake Mývatn, Iceland. Although temperatures increased at Mývatn over this period, there was only a slight (non-significant) decrease in midge adult body size, contrary to theoretical expectations. Using a state-space model including multiple predictors, body size was negatively associated with both water temperature and midge population abundance, and it was positively associated with 13 C enrichment of midges (an indicator of favorable food conditions). The magnitude of these effects were similar, such that simultaneous changes in temperature, abundance, and carbon stable isotopic signature could counteract each other in the long-term body size trend. Our results illustrate how multiple factors, all of which could be influenced by global change, interact to affect average ectotherm body size.

Reconstructing midge consumer-resource dynamics using carbon stable isotope signatures of archived specimens.

Population cycles can be caused by consumer-resource interactions. Confirming the role of consumer-resource interactions, however, can be challenging due to an absence of data for the resource candidate. For example, interactions between midge larvae and benthic algae likely govern the high-amplitude population fluctuations of Tanytarsus gracilentus in Lake Mývatn, Iceland, but there are no records of benthic resources concurrent with adult midge population counts. Here, we investigate consumer population dynamics using the carbon stable isotope signatures of archived T. gracilentus specimens collected from 1977 to 2015, under the assumption that midge δ13 C values reflect those of resources they consumed as larvae. We used the time series for population abundance and δ13 C to estimate interactions between midges and resources while accounting for measurement error and possible preservation effects on isotope values. Results were consistent with consumer-resource interactions: high δ13 C values preceded peaks in the midge population, and δ13 C values tended to decline after midges reached high abundance. One interpretation of this dynamic coupling is that midge isotope signatures reflect temporal variation in benthic algal δ13 C values, which we expected to mirror primary production. Following from this explanation, high benthic production (enriched δ13 C values) would contribute to increased midge abundance, and high midge abundance would result in declining benthic production (depleted δ13 C values). An additional and related explanation is that midges deplete benthic algal abundance once they reach peak densities, causing midges to increase their relative reliance on other resources including detritus and associated microorganisms. Such a shift in resource use would be consistent with the subsequent decline in midge δ13 C values. Our study adds evidence that midge-resource interactions drive T. gracilentus fluctuations and demonstrates a novel application of stable isotope time-series data to understand consumer population dynamics.

Ecosystem engineering alters density-dependent feedbacks in an aquatic insect population.

Ecosystem engineers have large impacts on the communities in which they live, and these impacts may feed back to populations of engineers themselves. In this study, we assessed the effect of ecosystem engineering on density-dependent feedbacks for midges in Lake Mývatn, Iceland. The midge larvae reside in the sediment and build silk tubes that provide a substrate for algal growth, thereby elevating benthic primary production. Benthic algae are in turn the primary food source for the midge larvae, setting the stage for the effects of engineering to feed back to the midges themselves. Using a field mesocosm experiment manipulating larval midge densities, we found a generally positive but nonlinear relationship between density and benthic production. Furthermore, adult emergence increased with the primary production per midge larva. By combining these two relationships in a simple model, we found that the positive effect of midges on benthic production weakened negative density dependence at low to intermediate larval densities. However, this benefit disappeared at high densities when midge consumption of primary producers exceeded their positive effects on primary production through ecosystem engineering. Our results illustrate how ecosystem engineering can alter density-dependent feedbacks for engineer populations.

Transient top-down and bottom-up effects of resources pulsed to multiple trophic levels.

Pulsed fluxes of organisms across ecosystem boundaries can exert top-down and bottom-up effects in recipient food webs, through both direct effects on the subsidized trophic levels and indirect effects on other components of the system. While previous theoretical and empirical studies demonstrate the influence of allochthonous subsidies on bottom-up and top-down processes, understanding how these forces act in conjunction is still limited, particularly when an allochthonous resource can simultaneously subsidize multiple trophic levels. Using the Lake Mývatn region in Iceland as an example system of allochthony and its potential effects on multiple trophic levels, we analyzed a mathematical model to evaluate how pulsed subsidies of aquatic insects affect the dynamics of a soil-plant-arthropod food web. We found that the relative balance of top-down and bottom-up effects on a given food web compartment was determined by trophic position, subsidy magnitude, and top predators' ability to exploit the subsidy. For intermediate trophic levels (e.g., detritivores and herbivores), we found that the subsidy could either alleviate or intensify top-down pressure from the predator. For some parameter combinations, alleviation and intensification occurred sequentially during and after the resource pulse. The total effect of the subsidy on detritivores and herbivores, including top-down and bottom-up processes, was determined by the rate at which predator consumption saturated with increasing size of the allochthonous subsidy, with greater saturation leading to increased bottom-up effects. Our findings illustrate how resource pulses to multiple trophic levels can influence food web dynamics by changing the relative strength of bottom-up and top-down effects, with bottom-up predominating top-down effects in most scenarios in this subarctic system.

Quantitative and qualitative assessment of pollen DNA metabarcoding using constructed species mixtures.

Pollen DNA metabarcoding-marker-based genetic identification of potentially mixed-species pollen samples-has applications across a variety of fields. While basic species-level pollen identification using standard DNA barcode markers is established, the extent to which metabarcoding (a) correctly assigns species identities to mixes (qualitative matching) and (b) generates sequence reads proportionally to their relative abundance in a sample (quantitative matching) is unclear, as these have not been assessed relative to known standards. We tested the quantitative and qualitative robustness of metabarcoding in constructed pollen mixtures varying in species richness (1-9 species), taxonomic relatedness (within genera to across class) and rarity (5%-100% of grains), using Illumina MiSeq with the markers rbcL and ITS2. Qualitatively, species composition determinations were largely correct, but false positives and negatives occurred. False negatives were typically driven by lack of a barcode gap or rarity in a sample. Species richness and taxonomic relatedness, however, did not strongly impact correct determinations. False positives were likely driven by contamination, chimeric sequences and/or misidentification by the bioinformatics pipeline. Quantitatively, the proportion of reads for each species was only weakly correlated with its relative abundance, in contrast to suggestions from some other studies. Quantitative mismatches are not correctable by consistent scaling factors, but instead are context-dependent on the other species present in a sample. Together, our results show that metabarcoding is largely robust for determining pollen presence/absence but that sequence reads should not be used to infer relative abundance of pollen grains.