Photocatalytic conversion of sugars to 5-hydroxymethylfurfural using aluminium(III) and fulvic acid.

5-hydroxymethylfurfural (HMF) is a valuable and essential platform chemical for establishing a sustainable, eco-friendly fine-chemical and pharmaceutical industry based on biomass. The cost-effective production of HMF from abundant C6 sugars requires mild reaction temperatures and efficient catalysts from naturally abundant materials. Herein, we report how fulvic acid forms complexes with Al3+ ions that exhibit solar absorption and photocatalytic activity for glucose conversion to HMF in one-pot reaction, in good yield (~60%) and at moderate temperatures (80 °C). When using representative components of fulvic acid, catechol and pyrogallol as ligands, 70 and 67% HMF yields are achieved, respectively, at 70 °C. Al3+ ions are not recognised as effective photocatalysts; however, complexing them with fulvic acid components as light antennas can create new functionality. This mechanism offers prospects for new green photocatalytic systems to synthesise a range of substances that have not previously been considered.

Preserving Retinal Structure and Function with the Novel Nitroxide Antioxidant, DCTEIO.

Oxidative stress is a major contributor to progressive neurodegenerative disease and may be a key target for the development of novel preventative and therapeutic strategies. Nitroxides have been successfully utilised to study changes in redox status (biological probes) and modulate radical-induced oxidative stress. This study investigates the efficacy of DCTEIO (5,6-dicarboxy-1,1,3,3-tetraethyllisoindolin-2-yloxyl), a stable, kinetically-persistent, nitroxide-based antioxidant, as a retinal neuroprotectant. The preservation of retinal function following an acute ischaemic/reperfusion (I/R) insult in the presence of DCTEIO was quantified by electroretinography (ERG). Inflammatory responses in retinal glia were analysed by GFAP and IBA-1 immunohistochemistry, and retinal integrity assessed by histology. A nitroxide probe combined with flow cytometry provided a rapid technique to assess oxidative stress and the mitigation offered by antioxidant compounds in cultured 661W photoreceptor cells. DCTEIO protected the retina from I/R-induced damage, maintaining retinal function. Histological analysis showed preservation of retinal integrity with reduced disruption and disorganisation of the inner and outer nuclear layers. I/R injury upregulated GFAP expression, indicative of retinal stress, which was significantly blunted by DCTEIO. The number of 'activated' microglia, particularly in the outer retina, in response to cellular stress was also significantly reduced by DCTEIO, potentially suggesting reduced inflammasome activation and cell death. DCTEIO mitigated oxidative stress in 661W retinal cell cultures, in a dose-dependent fashion. Together these findings demonstrate the potential of DCTEIO as a neuroprotective therapeutic for degenerative diseases of the CNS that involve an ROS-mediated component, including those of the retina e.g. age-related macular degeneration and glaucoma.

Plasmonic Silver-Nanoparticle-Catalysed Hydrogen Abstraction from the C(sp3 )-H Bond of the Benzylic Cα atom for Cleavage of Alkyl Aryl Ether Bonds.

Selective activation of the C(sp3 )-H bond is an important process in organic synthesis, where efficiently activating a specific C(sp3 )-H bond without causing side reactions remains one of chemistry's great challenges. Here we report that illuminated plasmonic silver metal nanoparticles (NPs) can abstract hydrogen from the C(sp3 )-H bond of the Cα atom of an alkyl aryl ether ß-O-4 linkage. The intense electromagnetic near-field generated at the illuminated plasmonic NPs promotes chemisorption of the ß-O-4 compound and the transfer of photo-generated hot electrons from the NPs to the adsorbed molecules leads to hydrogen abstraction and direct cleavage of the unreactive ether Cß -O bond under moderate reaction conditions (≈90 °C). The plasmon-driven process has certain exceptional features: enabling hydrogen abstraction from a specific C(sp3 )-H bond, along with precise scission of the targeted C-O bond to form aromatic compounds containing unsaturated, substituted groups in excellent yields.

Reactions of sulfoxides with reactive oxygen species to reveal the radical chemistry of pollution-derived particulate matter.

The radical reactions of dimethylsulfoxide (DMSO) and tetrahydrothiophene-1-oxide (THTO) with reactive oxygen species (ROS) in the presence of a nitroxide radical scavenger have been evaluated both synthetically and in analytical practice. Fenton-mediated generation of oxygen-centred radicals produced several unusual products that reflect the fragmentation and ring-opening radical mechanisms of DMSO and THTO respectively. Addition of pollution-derived ROS to DMSO/THTO nitroxide solutions produced LC-MS detectable amounts of the same products isolated from the larger-scaled Fenton reactions. For air pollution analysis, these results highlight the complexity surrounding DMSO reactivity and fragmentation, and indicate that THTO produces simpler outcomes that should facilitate analysis of the processes involved.

Surface-Plasmon-Enhanced Transmetalation between Copper and Palladium Nanoparticle Catalyst.

Surface-plasmon-mediated phenylacetylide intermediate transfer from the Cu to the Pd surface affords a novel mechanism for transmetalation, enabling wavelength-tunable cross-coupling and homo-coupling reaction pathway control. C-C bond forming Sonogashira coupling and Glaser coupling reactions in O2 atmosphere are efficiently driven by visible light over heterogeneous Cu and Pd nanoparticles as a mixed catalyst without base or other additives. The reaction pathway can be controlled by switching the excitation wavelength. Shorter wavelengths (400-500 nm) give the Glaser homo-coupling diyne, whereas longer wavelength irradiation (500-940 nm) significantly increases the degree of cross-coupling Sonogashira coupling products. The ratio of the activated intermediates of alkyne to the iodobenzene is wavelength dependent and this regulates transmetalation. This wavelength-tunable reaction pathway is a novel way to optimize the product selectivity in important organic syntheses.

Structural Geometry Variation of 1,4-Naphthalene-Based Co-Polymers to Tune the Device Performance of PVK-Host-Based OLEDs.

Blue-color-emitting organic semiconductors are of significance for organic light-emitting diodes (OLEDs). In this study, through Suzuki coupling polymerization, three 1,4-naphthalene-based copolymers-namely, PNP(1,4)-PT, PNP(1,4)-TF, and PNP(1,4)-ANT-were designed and synthesized. The variation of comonomers, phenothiazine (PT), triphenylamine substituted fluorene (TF), and anthanthrene (ANT), effectively tuned the emitting color and device performance of poly(9-vinyl carbazole) (PVK)-based OLEDs. Especially, the polymer PNP(1,4)-TF, bearing perpendicular aryl side groups, showed a most twisted structural geometry, which enabled an ultra-high thermal stability and a best performance with blue emitting in PVK-host-based OLEDs. Overall, in this work, we demonstrate a promising blue-color-emitting polymer through structural geometry manipulation.

Self-supporting covalent organic framework membranes synthesized through two different processes: solvothermal annealing and solvent vapor annealing.

Rigid, freestanding covalent organic framework (COF-1) membranes have been synthesized from 1,4-benzenediboronic acid (BDBA) precursors using two different approaches: room temperature solvent-vapour annealing (SVA) and solvothermal annealing (SA). Characterization of films using Fourier-transform infrared (FTIR) spectroscopy, x-ray diffraction (XRD), and various microscopies shows that the films obtained through the two different routes vary in their retained BDBA proportion, crystal size and macroscale morphology. Gas adsorption measurements give specific surface areas of 579 ± 7 m2 g-1 and 739 ± 11 m2 g-1 respectively, suggesting that the average porosity of these films is competitive with bulk-synthesized COF-1 particles. The films have a stratified structure, with a dense, thin top layer and a thicker, sponge-like base layer. Using nanoindentation, we measured the Young's modulus at the top surface of the SVA and SA films to be 3.64 ± 1.20 GPa and 3.33 ± 0.12 GPa respectively, with the smaller uncertainty for the SA film attributed to a more uniform morphology. These measurements provide useful experimental data pertaining to COF-1 mechanical properties, furnishing information relevant to the use of these free-standing membranes in applications such as gas filtration or storage.

Relationship between Atmospheric PM-Bound Reactive Oxygen Species, Their Half-Lives, and Regulated Pollutants: Investigation and Preliminary Model.

The concentration, nature, and persistence of particulate matter (PM)-bound reactive oxygen species (ROS) are of significant interest in understanding how atmospheric pollution affects health. However, the inherent difficulties in their measurement, particularly regarding the so-called "short-lived" ROS, have limited our understanding of their persistence and concentrations in the atmosphere. This paper aims to address this limitation through the analysis of PM-bound ROS measurements from the Particle Into Nitroxide Quencher (PINQ) system at an atmospheric monitoring site in the city of Heshan, Guangdong Province, China. The measured daily average and standard deviation for the measurement period was 0.050 ± 0.017 nmol·m-3. The averaged measured concentration of ROS per mass of PM and standard deviation was 0.0012 ± nmol·mg. The dataset was also correlated with standard pollutants, and a simplified model was constructed to separate the contributions of short-lived (t1/2 = 5 min) and long-lived (t1/2 ∼ infinity) ROS to total concentration using ozone, carbon monoxide, and PM mass. This showed that the short-lived ROS contribute an average of 33% of the daily PM-bound ROS burden over the measurement period, up to 52% of daily average on elevated days, and up to 71% for hourly averages. These results highlight the need for accurate measurements of short-lived ROS and provide the starting point for a general model to predict PM-bound ROS concentrations using widely available standard pollutants for future epidemiological research.

Nitroxides affect neurological deficits and lesion size induced by a rat model of traumatic brain injury.

Research has attributed tissue damage post-traumatic brain injury (TBI) to two-pronged effects, increased reactive oxygen species (ROS) and impairment of endogenous antioxidant defence systems, underpinned by manganese superoxide dismutase (MnSOD). Novel antioxidant nitroxides have been shown to mimic MnSOD to ameliorate oxidative stress related disorders. This study aimed to investigate the effects of two nitroxides, CTMIO and DCTEIO, on the neurological outcomes following moderate TBI in rats induced by a weight drop device. The rats were immediately treated with CTMIO and DCTEIO (40 mM in drinking water) post-injury for up to 2 weeks. The brains were histologically examined at 24 h and 6 weeks post injury. DCTEIO reduced the lesion size at both 24h and 6 weeks, with normalised performance in sensory, motor and cognitive tests at 24h post-injury. Astrogliosis was heightened by DCTEIO at 24h and still elevated at 6 weeks in this group. In TBI brains, cellular damage was evident as reflected by changes in markers of mitophagy and autophagy (increased fission marker dynamin-related protein (Drp)-1, and autophagy marker light chain 3 (LC3)A/B and reduced fusion marker optic atrophy (Opa)-1). These were normalised by DCTEIO treatment. CTMIO, on the other hand, seems to be toxic to the injured brains, by increasing injury size at 6 weeks. In conclusion, DCTEIO significantly improved tissue repair and preserved neurological function in rats with TBI possibly via a mitophagy mechanism. This study provides evidence for DCTEIO as a promising new option to alleviate lesion severity after moderate TBI, which is not actively treated.

Developments of Diketopyrrolopyrrole-Dye-Based Organic Semiconductors for a Wide Range of Applications in Electronics.

In recent times, fused aromatic diketopyrrolopyrrole (DPP)-based functional semiconductors have attracted considerable attention in the developing field of organic electronics. Over the past few years, DPP-based semiconductors have demonstrated remarkable improvements in the performance of both organic field-effect transistor (OFET) and organic photovoltaic (OPV) devices due to the favorable features of the DPP unit, such as excellent planarity and better electron-withdrawing ability. Driven by this success, DPP-based materials are now being exploited in various other electronic devices including complementary circuits, memory devices, chemical sensors, photodetectors, perovskite solar cells, organic light-emitting diodes, and more. Recent developments in the use of DPP-based materials for a wide range of electronic devices are summarized, focusing on OFET, OPV, and newly developed devices with a discussion of device performance in terms of molecular engineering. Useful guidance for the design of future DPP-based materials and the exploration of more advanced applications is provided.

Measurements of Oxidative Potential of Particulate Matter at Belgrade Tunnel; Comparison of BPEAnit, DTT and DCFH Assays.

To estimate the oxidative potential (OP) of particulate matter (PM), two commonly used cell-free, molecular probes were applied: dithiothreitol (DTT) and dichloro-dihydro-fluorescein diacetate (DCFH-DA), and their performance was compared with 9,10-bis (phenylethynyl) anthracene-nitroxide (BPEAnit). To the best of our knowledge, this is the first study in which the performance of the DTT and DCFH has been compared with the BPEAnit probe. The average concentrations of PM, organic carbon (OC) and elemental carbon (EC) for fine (PM2.5) and coarse (PM10) particles were determined. The results were 44.8 ± 13.7, 9.8 ± 5.1 and 9.3 ± 4.8 µg·m-3 for PM2.5 and 75.5 ± 25.1, 16.3 ± 8.7 and 11.8 ± 5.3 µg·m-3 for PM10, respectively, for PM, OC and EC. The water-soluble organic carbon (WSOC) fraction accounted for 42 ± 14% and 28 ± 9% of organic carbon in PM2.5 and PM10, respectively. The average volume normalized OP values for the three assays depended on both the sampling periods and the PM fractions. The OPBPEAnit had its peak at 2 p.m.; in the afternoon, it was three times higher compared to the morning and late afternoon values. The DCFH and BPEAnit results were correlated (r = 0.64), while there was no good agreement between the BPEAnit and the DTT (r = 0.14). The total organic content of PM does not necessarily represent oxidative capacity and it shows varying correlation with the OP. With respect to the two PM fractions studied, the OP was mostly associated with smaller particles.

Application of a Fluorescent Probe for the Online Measurement of PM-Bound Reactive Oxygen Species in Chamber and Ambient Studies.

This manuscript details the application of a profluorescent nitroxide (PFN) for the online quantification of radical concentrations on particulate matter (PM) using an improved Particle Into Nitroxide Quencher (PINQ). A miniature flow-through fluorimeter developed specifically for use with the 9,10-bis(phenylethynyl)anthracene-nitroxide (BPEAnit) probe was integrated into the PINQ, along with automated gas phase corrections through periodic high efficiency particle arrestor (HEPA) filtering. The resulting instrument is capable of unattended sampling and was operated with a minimum time resolution of 2.5 min. Details of the fluorimeter design and examples of data processing are provided, and results from a chamber study of side-stream cigarette smoke and ambient monitoring campaign in Guangzhou, China are presented. Primary cigarette smoke was shown to have both short-lived (t1/2 = 27 min) and long-lived (t1/2 = indefinite) PM-bound reactive oxygen species (ROS) components which had previously only been observed in secondary organic aerosol (SOA).

Quantification of Particle-Bound Organic Radicals in Secondary Organic Aerosol.

The chemical composition and evolution of secondary organic aerosol (SOA) in the atmosphere represents one of the largest uncertainties in our current understanding of air quality. Despite vast research, the toxicological mechanisms relating to adverse human health effects upon exposure to particulate matter are still poorly understood. Particle-bound reactive oxygen species (ROS) may substantially contribute to observed health effects by influencing aerosol oxidative potential (OP). The role of radicals in both the formation and aging of aerosol, as well as their contribution to aerosol OP, remains highly uncertain. The profluorescent spin trap BPEAnit (9,10-bis(phenylethynyl)anthracenenitroxide), previously utilized to study combustion-generated aerosol, has been applied to provide the first estimate of particle-bound radical concentrations in SOA. We demonstrate that SOA from different atmospherically important VOC precursors have different particle-bound radical concentrations, estimated for the ozonolysis of α-pinene (0.020 ± 0.0050 nmol/µg), limonene (0.0059 ± 0.0010 nmol/µg), and ß-caryophyllene (0.0025 ± 0.00080 nmol/µg), highlighting the potential importance of OH-initiated formation of particle-bound organic radicals. Additionally, the lifetime of particle-bound radical species in α-pinene SOA was estimated, and a pseudo-first-order rate constant of k = 7.3 ± 1.7 × 10-3 s-1 was derived, implying a radical lifetime on the order of minutes.

Free-radical gases on two-dimensional transition-metal disulfides (XS2, X = Mo/W): robust half-metallicity for efficient nitrogen oxide sensors.

The detection of single gas molecules is a highly challenging work because it requires sensors with an ultra-high level of sensitivity. By using density functional theory, here we demonstrate that the adsorption of a paramagnetic unpaired free radical gas (NO) on a monolayer of XS2 (X = Mo, W) can trigger the transition from semiconductor to half metal. More precisely, the single-layer XS2 (X = Mo, W) with NO adsorbed on it would behave like a metal in one spin channel while acting as a semiconductor in the other spin orientation. The half-metallicity is robust and independent of the NO concentration. In contrast, no half-metallic feature can be observed after the adsorption of other free radical gases such as NO2. The unique change in electronic properties after the adsorption of NO on transition-metal sulfides highlights an effective strategy to distinguish NO from other gas species by experimentally measuring spin-resolved transmission. Our results also suggest XS2 (X = Mo, W) nanosheets can act as promising nanoscale NO sensors.

Pro-fluorescent mitochondria-targeted real-time responsive redox probes synthesised from carboxy isoindoline nitroxides: Sensitive probes of mitochondrial redox status in cells.

Here we describe new fluorescent probes based on fluorescein and rhodamine that provide reversible, real-time insight into cellular redox status. The new probes incorporate bio-imaging relevant fluorophores derived from fluorescein and rhodamine linked with stable nitroxide radicals such that they cannot be cleaved, either spontaneously or enzymatically by cellular processes. Overall fluorescence emission is determined by reversible reduction and oxidation, hence the steady state emission intensity reflects the balance between redox potentials of critical redox couples within the cell. The permanent positive charge on the rhodamine-based probes leads to their rapid localisation within mitochondria in cells. Reduction and oxidation also leads to marked changes in the fluorophore lifetime, enabling monitoring by fluorescence lifetime imaging microscopy. Finally, we demonstrate that administration of a methyl ester version of the rhodamine-based probe can be used at concentrations as low as 5 nM to generate a readily detected response to redox stress within cells as analysed by flow cytometry.

Design, synthesis and biological evaluation of hybrid nitroxide-based non-steroidal anti-inflammatory drugs.

Dual-acting hybrid anti-oxidant/anti-inflammatory agents were developed employing the principle of pharmacophore hybridization. Hybrid agents were synthesized by combining stable anti-oxidant nitroxides with conventional non-steroidal anti-inflammatory drugs (NSAIDs). Several of the hybrid nitroxide-NSAID conjugates displayed promising anti-oxidant and anti-inflammatory effects on two Non-Small Cell Lung Cancer (NSCLC) cells (A549 and NCI-H1299) and in ameliorating oxidative stress induced in 661 W retinal cells. One ester-linked nitroxide-aspirin analogue (27) delivered better anti-inflammatory effects (cyclooxygenase inhibition) than the parent compound (aspirin), and also showed similar reactive oxygen scavenging activity to the anti-oxidant, Tempol. In addition, a nitroxide linked to the anti-inflammatory drug indomethacin (39) significantly ameliorated the effects of oxidative stress on 661 W retinal neurons at efficacies greater or equal to the anti-oxidant Lutein. Other examples of the hybrid conjugates displayed promising anti-cancer activity, as demonstrated by their inhibitory effects on the proliferation of A549 NSCLC cells.

New Spin on Organic Radical Batteries-An Isoindoline Nitroxide-Based High-Voltage Cathode Material.

Organic electrode materials are a highly promising and environmentally benign class of battery materials with radical polymers being at the forefront of this research. Herein, we report the first example of the 1,1,3,3-tetramethylisoindolin-2-yloxyl class of nitroxides as an organic electrode material and the synthesis and application of a novel styrenic nitroxide polymer, poly(5-vinyl-1,1,3,3-tetramethylisoindolin-2-yloxyl) (PVTMIO). The polymer was synthesized from the precursor monomer, 2-methoxy-5-vinyl-1,1,3,3-tetramethylisoindoline, and subsequent oxidative deprotection yielded the electroactive radical species. Cyclic voltammetry revealed a high oxidation potential of 3.7 V versus Li, placing it among the top of the nitroxide class of electrode materials. The suitability of PVTMIO for utilization in a high-voltage organic radical battery was confirmed with a discharge capacity of 104.7 mAh g-1, high rate performance, and stability under cycling conditions (90% capacity retention after 100 cycles), making it one of the highest reported organic p-dopable cathode materials.

Predicting Two-Dimensional C3B/C3N van der Waals p-n Heterojunction with Strong Interlayer Electron Coupling and Enhanced Photocurrent.

The interlayer coupling in 2D van der Waals (vdW) heterostructures (HTS) plays the main role in generating new physics. However, the interlayer coupling is often weak, and little information on the strength of interlayer interaction in HTS is available. On the basis of density functional theory, we demonstrate that an effective electron coupling can be created in 2D C3B/C3N vdW HTS. The experimentally synthesized monolayers C3B and C3N are p- and n-type doped large gap semiconductors, respectively. However, the formed vdW HTS exhibits novel Dirac fermion. The strong interlayer electron coupling results in a large interlayer built-in electric field and improved optical properties of the 2D C3B/C3N vdW HTS. Moreover, a simple tight-binding model of C3B/C3N HTS with the nonzero interlayer hopping parameters captures the physical picture of interlayer coupling. Our results demonstrate the importance of interlayer electron coupling in the modulation of materials properties of 2D vdW HTS.

Two-dimensional GeP3 as a high capacity electrode material for Li-ion batteries.

Two-dimensional (2D) materials are promising for use in lithium (Li) electrodes due to their high surface ratio. By using density functional theory (DFT) calculations, we investigate the adsorption and diffusion of Li on a newly predicted 2D GeP3 material [Nano Lett., 2016, 17, 1833]. The most favourable adsorption sites for Li are identified, and a semiconducting to metallic transition induced by Li adsorption is found, which indicates excellent electrical conductivity. The GeP3 monolayer has an estimated capacity of 648 mA h g-1, which is almost twice that of commercially used graphite (375 mA h g-1). During full Li intercalation, the GeP3 layer undergoes only 1.2% lattice parameter reduction. Moreover, GeP3 possesses the advantages of a small diffusion barrier (∼0.5 eV) and low average open-circuit voltages (∼0.4 V). Our results highlight a new class of promising anode materials, i.e. 2D phosphide, as potential rechargeable lithium batteries with ultrahigh-capacity, superior ionic conductivity, and low average open-circuit voltage.

Selective Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid Using O2 and a Photocatalyst of Co-thioporphyrazine Bonded to g-C3N4.

Selective oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) is one of the key reactions for producing chemical commodities from biomass and their derivatives. The challenge for this reaction is to develop an efficient catalytic process that can be conducted under mild conditions (room temperature and atmospheric pressure, using oxygen molecules in air as the oxidant) and a recyclable catalyst. Herein we report a photocatalyst of cobalt thioporphyrazine (CoPz) dispersed on g-C3N4 (abbreviated as CoPz/g-C3N4), which exhibits excellent catalytic activity toward the selective oxidation of HMF into FDCA under simulated sunlight using oxygen molecules in air as a benign oxidant. For example, an FDCA yield of 96.1% in an aqueous solution at pH = 9.18 is achieved at ambient temperature and air pressure. At lower pH (4.01), the product generated is 2,5-diformylfuran. Hence, it is possible to control the reaction outcome by control of the pH of the reaction system. g-C3N4 itself is not a suitable catalyst for the selective oxidation because under the experimental conditions g-C3N4 generates hydroxyl radicals that initiate processes that oxidize HMF directly to CO2 and H2O. CoPz on the other hand activates O2 to give singlet oxygen (1O2), which more controllably oxidizes HMF to FDCA albeit at a more moderate yield (36.2%). The strong interaction between the CoPz and g-C3N4 in the CoPz/g-C3N4 catalyst is experimentally evidenced, which not only improves accessibility of the CoPz sites and makes the catalyst recyclable but also disables the hydroxyl radical generation by g-C3N4 and promotes 1O2 generation on the CoPz sites, significantly enhancing the catalytic performance. This study demonstrates the potential for efficient non-noble metal photocatalysts for organic transformations driven by sunlight.