Extraction of extracellular polymeric substances from dam lake fresh sediments derived from crystalline bedrock.

Extracellular polymeric substances (EPS) produced by microorganisms have a key role in the sedimentary compartment, e.g. promoting aggregation and biostabilisation of sediment particles and increasing chemical reactivity at the water/sediment interface. Therefore, proper extraction methods are needed to study this EPS matrix. In this work, nine extraction methods based on physical (centrifugation, sonication), chemical (sodium hydroxide, sodium pyrophosphate, sodium tetraborate), and both chemical and physical (cation exchange resins, i.e. CER) treatments and their combinations, as well as the solid:liquid ratio used for extraction, were compared based on the quantity and compositions of extracted EPS. The organic carbon extracted was quantified and the nature of biochemical macromolecules (proteins, polysaccharides, and humic-like compounds) was evaluated using colorimetric methods. The amount of ATP was used as an indicator of cell lysis and showed contamination with intracellular materials in EPS extracted with chemical methods. Moreover, chemical extraction presented a large quantity of impurities due to non-removal of reactant salts by ultracentrifugation. For the nine methods tested, humic-like substances represented the main fraction of the extracted EPS, but for chemical extraction, the presence of humic materials from the sediment organic fraction was due to non-specific extraction of the EPS fraction. Therefore, chemicals methods are not recommended to extract EPS from sediment. Despite their low extraction efficiency, physical methods and CER, i.e. 'soft' extraction methods, are preferred using a solid:liquid ratio 1:40.

Cadmium Selenide Formation Influences the Production and Characteristics of Extracellular Polymeric Substances of Anaerobic Granular Sludge.

Feeding cadmium (II) and selenium (IV) simultaneously to anaerobic granular sludge with the aim of synthesizing cadmium selenide (CdSe) nanoparticles induces compositional changes in the extracellular polymeric substances (EPS) matrix of this sludge. A methanogenic anaerobic granular sludge was repeatedly exposed to Cd(II) (10-50 mg L-1) and selenite (79 mg L-1) for 300 days at pH 7.3 and 30 °C in a fed-batch feeding regime for enrichment of Se-reducing bacteria and synthesis of CdSe nanoparticles. EPS fingerprints of the granular sludge, obtained by size exclusion chromatography coupled to a fluorescence detector, showed a significant increase in the intensity of protein-like substances with > 100 kDa apparent molecular weight (aMW) upon repeated exposure to Cd(II) and Se(VI). This was accompanied by a prominent decrease in protein-like substances of aMW < 10 kDa. The fingerprint of the humic-like substances showed emergence of a new peak with aMW of 13 to 300 kDa in the EPS extracted from the Cd/Se fed granular sludge. Experiments on metal(loid)-EPS interactions showed that the CdSe nanoparticles interact mainly with loosely bound EPS (LB-EPS). This study showed that the formation of Se(0) and CdSe nanoparticles occurs in the LB-EPS fraction of the granular sludge and repeated exposure to Cd and Se induces compositional changes in the EPS matrix.

Identification of functional groups of Opuntia ficus-indica involved in coagulation process after its active part extraction.

Opuntia ficus-indica that belongs to the Cactaceae family and is a member of Opuntia kind has received increasing research interest for wastewater treatment by flocculation. The objectives of this study were (i) to provide more information regarding the active constituents of Opuntia spp. and (ii) to improve the extracting and using conditions of the flocculant molecules for water treatment. A classic approach by jar test experiments was used with raw and extracted material by solubilization and precipitation. The surface properties of solid material were characterized by FTIR, SEM, zeta potential measurement, and surface titration. The splitting based on the solubility of the material with pH and the titration of functional groups completed the method. The optimal pH value for a coagulation-flocculation process using cactus solid material (CSM) was 10.0 and a processing rate of 35 mg L-1. The alkaline pH of flocculation suggests an adsorption mechanism with bridging effect between particles by water-soluble extracted molecules. To validate this mechanism, an extraction water was carried out at pH = 10 (optimum of flocculation) and the solution was acidified (pH = 7) to allow precipitation of so considered active flocculant molecules. The strong flocculant property of this extract was verified, and titration of this solution showed at least one specific pKa of 9.0 ± 0.6. This pKa corresponds to phenol groups, which could be assigned to lignin and tannin.

Production of Aspergillus niger biomass on sugarcane distillery wastewater: physiological aspects and potential for biodiesel production.

BACKGROUND: Sugarcane distillery waste water (SDW) or vinasse is the residual liquid waste generated during sugarcane molasses fermentation and alcohol distillation. Worldwide, this effluent is responsible for serious environmental issues. In Reunion Island, between 100 and 200 thousand tons of SDW are produced each year by the three local distilleries. In this study, the potential of Aspergillus niger to reduce the pollution load of SDW and to produce interesting metabolites has been investigated. RESULTS: The fungal biomass yield was 35 g L-1 corresponding to a yield of 0.47 g of biomass/g of vinasse without nutrient complementation. Analysis of sugar consumption indicated that mono-carbohydrates were initially released from residual polysaccharides and then gradually consumed until complete exhaustion. The high biomass yield likely arises from polysaccharides that are hydrolysed prior to be assimilated as monosaccharides and from organic acids and other complex compounds that provided additional C-sources for growth. Comparison of the size exclusion chromatography profiles of raw and pre-treated vinasse confirmed the conversion of humic- and/or phenolic-like molecules into protein-like metabolites. As a consequence, chemical oxygen demand of vinasse decreased by 53%. Interestingly, analysis of intracellular lipids of the biomass revealed high content in oleic acid and physical properties relevant for biodiesel application. CONCLUSIONS: The soft-rot fungus A. niger demonstrated a great ability to grow on vinasse and to degrade this complex and hostile medium. The high biomass production is accompanied by a utilization of carbon sources like residual carbohydrates, organic acids and more complex molecules such as melanoidins. We also showed that intracellular lipids from fungal biomass can efficiently be exploited into biodiesel.

Hydrophobic features of EPS extracted from anaerobic granular sludge: an investigation based on DAX-8 resin fractionation and size exclusion chromatography.

The hydrophobic fractionation of extracellular polymeric substances (EPS) extracted from anaerobic granular sludge was performed on the DAX-8 resin (two elution pH conditions, i.e., pH 2 and pH 5 were tested). The impact of seven different EPS extraction methods on EPS hydrophobicity features was assessed. The results showed that the extraction methods and bulk solution pH influenced dramatically the biochemical composition of the EPS, and in turn, the hydrophobicity determined. Besides, EPS extracting reagents i.e., formaldehyde, ethanol, sodium dodecyl sulfate (SDS), and Tween 20 not only introduced extra carbon content in the total organic carbon (TOC) measurement but also interacted with the DAX-8 resin. By comparing the apparent molecular weight (aMW) distribution of untreated and pH-adjusted EPS samples, more complete EPS aMW information was preserved at pH 5. Thus, elution at pH 5 was preferred in this study for the qualitative analysis of EPS hydrophobic features. The hydrophobic fraction of EPS retained by the resin at pH 5 was ascribed to a wide aMW range, ranging from >440 to 0.3 kDa. Within this range, EPS molecules ranging from 175 to 31 kDa were mostly retained by the DAX-8 resin, which indicates that these EPS molecules are highly hydrophobic.

Role of extracellular polymeric substances (EPS) production in bioaggregation: application to wastewater treatment.

This paper reviews the formation, structure, and stability of bioaggregates with an emphasis on the composition and distribution of extracellular polymeric substances (EPS) and their role in bioaggregation. Bioaggregation is ubiquitous in natural environment and is of great importance in biological wastewater treatment processes. It greatly influences the flocculability, settleability, and dewaterability for flocs and sludge retention and shear resistance for biofilms. The physico-chemical and microbial structures of bioaggregates are dependent on operational conditions as well as microbial diversity and spatial distribution. The formation of bioaggregates is mediated by the physico-chemical interactions as well as the microbial interactions such as EPS production and quorum sensing. EPS are composed of a mixture of macromolecules including proteins, polysaccharides, humic-like substances, and nucleic acids, which entrap the microbial cells in a three-dimensional matrix. The composition and physico-chemical characteristics of EPS have significant influence on the maintenance of the bioaggregate structure and the process performance of the wastewater treatment. However, the mechanisms of bioaggregation are still unclear and the conclusions on the role of EPS were mostly drawn from the established correlations and hypotheses. This paper expects to provide up-to-date knowledge on bioaggregation and insights for further studies and applications.

Evidence of glycoproteins and sulphated proteoglycan-like presence in extracellular polymeric substance from anaerobic granular sludge.

The protein fraction of extracellular polymeric substance (EPS) from two anaerobic granular sludge samples was characterized with sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) and a far western blotting method. SDS-PAGE was used with various staining applications to obtain a protein (silver), glycoprotein [periodic acid-Shiff's (PAS)] or proteoglycan-like (Alcian blue at pH 2.5 (carboxylic group) or 1 (sulphated group)) fingerprint. The fingerprints of the EPS denatured protein from the two sludge samples differed. Some proteins are specific to Soluble (S) or Bound (B)-EPS (20-100 kDa). Denatured proteins with a polysaccharide moieties characterization are more present in B-EPS. Glycoproteins with α-d-mannosyl and/or α-d-glucosyl (90, 50, 40 kDa) were detected. Proteoglycan-like and sulphated proteoglycan-like substances are also detected, mainly in B-EPS. A 68 kDa sulphated proteoglycan-like substance contains two glucidic residue types: α-d-mannosyl and/or α-d-glucosyl and N-acetyl-ß-d-glucosamine. Such heteroproteins are present around the membrane as well as the surface-layer from Archaea and from some bacteria. The glycoprotein and sulphated proteoglycan-like substance are assumed to contribute to anaerobic granule strength, thanks to their ability to perform interactions of various nature (ionic, hydrophobic, Ca(2+) as divalent cation bridging, etc.).

Impact of synthetic or real urban wastewater on membrane bioreactor (MBR) performances and membrane fouling under stable conditions.

Influence of substrate type (synthetic (SWW) or real wastewater (RWW)) on lab scale MBR performances (e.g. COD and N-NH4(+) removal rates and bioactivities) was assessed. Membrane fouling was related to MBR biological medium characteristics. With RWW, autotrophic biomass was better acclimated with complete ammonium removal. MBR biological medium was characterized by main soluble microbial products (SMP) (proteins, polysaccharides and humic-like substances) quantification and molecular weights (MW) distribution determination. The biological medium of SWW acclimation contained 60mgL(-1) more of SMP, mainly composed of proteins and polysaccharides. A protein fraction having high MW (>600kDa) could be responsible for higher removable fouling fraction in that case. SMP of RWW experiment were mainly composed of small proteic and humic-like fractions, poorly retained by the membrane and resulting in a weak augmentation of irremovable and irreversible fouling fractions compared to SWW acclimation. Therefore RWW utilization is preferable to approach real operating MBR.

Interaction of erythromycin ethylsuccinate and acetaminophen with protein fraction of extracellular polymeric substances (EPS) from various bacterial aggregates.

Extracellular polymeric substances (EPS) are, along with microbial cells, the main components of the biological sludges used in wastewater treatment and natural biofilms. EPS play a major role in removing pollutants from water by means of sorption. The ability of soluble EPS (S-EPS) and bound EPS (B-EPS) derived from various bacterial aggregates (flocs, granules, biofilms) to bind at pH 7.0 ± 0.1 to two pharmaceutical substances, acetaminophen (ACE) and erythromycin ethylsuccinate (ERY), has been investigated using the fluorescence quenching method. Two intense fluorescence peaks, A (Ex/Em range, 200-250/275-380 nm) and B (Ex/Em range, 260-320/275-360 nm), corresponding respectively to the aromatic protein region and soluble microbial by-product-like region, were identified in a three-dimensional excitation-emission matrix of EPS samples. The fluorescence peak, which corresponds to humic-like substances, was also identified though at low intensity. The ability of EPS to bind ACE was found to exceed that for ERY. The aromatic protein fraction of EPS displays a slightly higher affinity for drugs than that shown by the soluble microbial by-product-like fraction. The S-EPS and B-EPS present the same affinity for ACE and ERY. The effective quenching constants (log K) derived from the Stern-Volmer Equation equaled at peak A (with S-EPS): 3.7 ± 0.2 to 4.0 ± 0.1 for ACE and 2.1 ± 0.3 to 2.7 ± 0.1 for ERY. With B-EPS, these values were 3.9 ± 0.1 to 4.0 ± 0.1 for ACE and 2.0 ± 0.2 to 2.6 ± 0.1 for ERY. Our results suggest that the weaker EPS affinity for ERY than for ACE serves to partially explain why only about 50-80 % of ERY is removed from wastewater at the treatment plant. Moreover, this work demonstrates that EPS from natural river biofilms are able to bind drugs, which in turn may limit the mobility of drugs in natural waters.

Fluorescence detection to determine proteins and humic-like substances fingerprints of exopolymeric substances (EPS) from biological sludges performed by size exclusion chromatography (SEC).

Fingerprints of extracellular polymeric substances (EPS) from activated and anaerobic granular sludges were obtained by size exclusion chromatography coupled to UV (210 and 280 nm) and fluorescence (221/350 nm (protein-like molecules) and 345/443 nm (humic-like substances)) detection. The total area below the peaks obtained with fluorescence detection is linked to the protein or humic-like substances EPS content. The EPS protein fingerprints, usually recorded with UV-280 nm, change dramatically, mainly in the relative size of peaks when they were measured by a florescence detection method. It means that the apparent molecular weight (aMW) distribution of EPS chomatophores and fluorophores is different. Protein-like and humic-like substances were found to be specific fingerprints of the EPS, affected by the type and origin of the bacterial aggregate and improve EPS sample differentiation. The protein-like fraction of EPS displays a wide range of aMW (>600 kDa-<10 kDa) whereas the humic-like substances fraction is composed of molecules of low aMW (6-<1.2 kDa).

Qualitative characterization of the protein fraction of exopolymeric substances (EPS) extracted with EDTA from sludge.

Exopolymeric substances (EPS) were extracted by EDTA from activated and anaerobic granular sludge. Due to the presence of EDTA in EPS extract, interferences were pointed out for the characterization of EPS by means of the colorimetric methods and fluorescence spectroscopy. Other methods have been investigated to characterize the EPS protein fraction. Size exclusion chromatography (SEC), performed at a fluorescence excitation-emission matrix of 221/360 nm (tryptophan protein-like substances) for detection, was suitable and allowed obtaining a fingerprint of the protein-like substance fractions and determining apparent molecular weight (MW). Polyacrylamide gel electrophoresis (PAGE) was performed under either native or denaturing conditions. Various staining applications after EPS migration are effective in obtaining a protein (silver staining) or glycoprotein (PAS staining) fingerprint or MW distribution. SEC and PAGE are both appropriate techniques for the qualitative characterization of protein fractions from EPS extracted by EDTA and moreover differentiate EPS according to sludge origin and type.

Characterisation of the mineral fraction in extracellular polymeric substances (EPS) from activated sludges extracted by eight different methods.

This work characterises the mineral fraction of EPS extracts obtained using eight different methods from two activated sludges by total mineral content determination, Fourier Transformed Infrared spectrometry and with scanning electron microscopy coupled with an EDX probe. Despite EPS dialysis, the EPS extracts displayed a mineral fraction between 2% and 40% of the EPS dry weight depending on the extraction method used. The main mineral elements found in the EPS extract were Ca, Mg, Na, K, Al, Fe, Mn, P, Si and S, but their contents were strongly affected by the extraction method used. Some of the minerals are associated with the organic molecules within the EPS. The presence of mineral particles of various compositions and structures (clays, quartz or carbonate) in the EPS extract with a wide range in size was clearly demonstrated. Moreover, the association of metallic elements with the mineral particles in the EPS extract was highlighted.