Bone marrow stromal cell-derived hepcidin has antimicrobial and immunomodulatory activities.

Bone marrow stromal cells (BMSCs) have immunomodulatory activities in numerous species and have been used in clinical trials. BMSCs also make antibacterial agents. Since hepcidin is known to have antimicrobial effects in fish, we wondered if it might also be used as an antimicrobial agent by mammalian BMSCs. In the present study, we show hepcidin expression in both mouse (mBMSC) and human BMSCs (hBMSC). We observed a hBMSC hepcidin-dependent degradation of ferroportin in HEK-293 reporter cells in vitro. In human and mouse bone marrows (BM) we detected hepcidin-positive BMSCs in close proximity to hematopoietic progenitors. The conditioned culture medium of hBMSCs significantly reduced bacterial proliferation that was partially blocked by a hepcidin-neutralizing antibody. Similarly, medium in which hepcidin-deficient (Hamp-/-) mouse BMSCs had been grown was significantly less effective in reducing bacterial counts than the medium of wild-type cells. In a zymosan-induced peritonitis mouse model we found that mBMSC-derived hepcidin reduced the number of invading polymorphonuclear (PMN) cells in the peritoneal cavity. Our results show that BMSC-derived hepcidin has antimicrobial properties in vitro and also reduces inflammation in vivo. We conclude that hepcidin should be added to the expanding arsenal of agents available to BMSCs to fight infections and inflammation.

Device Malfunction Associated With Mandibular Distraction for Infants With Robin Sequence.

INTRODUCTION: Mandibular distraction osteogenesis (MDO) effectively treats upper airway obstruction (UAO) in young patients with Robin sequence (RS). The most commonly used MDO devices have internal and external components that require manual activation. Although complications associated with MDO in infants with RS have been well documented, hardware/device malfunction has not been precisely described. The present study reports the authors' recent experiences with such problems, in an effort to shed light on these complications and identify potential steps to mitigate future related issues. DESIGN: The authors reviewed a prospectively gathered database to identify all young children under the age of 3 years who underwent MDO using buried internal devices for UAO associated with grade 3 RS from March 2007 to September 2019. We specifically focused on complications attributable to the hardware itself. RESULTS: Nineteen patients with 40 devices met inclusion criteria. The median age at MDO was 2.3 months (interquartile range 1.4-6.3 months). Intraoperative activation of all devices under direct vision resulted in satisfactory distraction. Four devices (10.5%) developed postoperative complications directly related to the device, including break down of component parts (N = 3) and failure to maintain distraction distance (N = 1). Two patients required surgical replacement of one device each, whereas the remaining complications occurred during the consolidation phase and did not require intervention. CONCLUSIONS: This report documents a series of device/hardware malfunction in infants and young children undergoing MDO for severe UAO associated with RS. Despite rigorous testing and development, these devices may fail, resulting in patient morbidity.

Severity of Airway Obstruction May Not Correlate With Weight Gain or Failure to Thrive in Infants With Robin Sequence: A Pilot Study.

OBJECTIVE: Patients with Robin sequence (RS) can present with varying degrees of upper airway obstruction, difficulty maintaining adequate weight gain, and failure to thrive (FTT). Although inductive reasoning would suggest that these issues should be interrelated, the relationships between these factors have not been formally studied. This investigation explores the correlation between polysomnographic (PSG) findings, weight gain, and FTT in patients with RS. DESIGN: A prospective database for baseline PSG parameters and serial weight measurements in infants with RS who were admitted for airway obstruction was reviewed. The association between PSG variables and calorie intake with FTT was assessed using univariate and multivariable logistic regression. Categorical analysis of the PSG variables against FTT was explored with a Poisson regression, and linear regression was performed to evaluate the correlation between PSG parameters and percentage of weight gain. RESULTS: Univariate and multivariate logistic regression in RS patients with (n = 13) and without (n = 20) FTT showed no significant association between apnea-hypopnea index (adjusted odds ratio [aOR]: 0.99, P-value = 0.403), O2 nadir (aOR: 0.98, P-value = 0.577), time of O2 saturation below 90% (aOR: 1.03, P-value = 0.574), maximum end tidal carbon dioxide (aOR: 1.0, P-value = 0.977), and average calorie intake (OR:1.02; P-value = 0.984). Furthermore, no significant associations were identified between these variables and weight gain. CONCLUSIONS: This pilot study questions the widely held and intuitively logical belief that poor weight gain and/or FTT should correlate with the severity of upper airway obstruction in patients with RS. Large prospective investigations should be initiated to better explore the authors' findings. Our results also underscore the importance of individualized treatment for these challenging patients.

Reconstruction of a Hemirhinectomy Defect Using a Three-Dimensional Printed Custom Soft Tissue Cutting Guide.

ABSTRACT: The 3-stage paramedian forehead flap is the gold standard for subtotal and complete nasal defects, but significant surgeon artistry and experience are required to achieve good, consistent results. The authors describe the use of virtual surgical planning and three-dimensional printing to create a patient-specific soft tissue cutting guide for the design of a forehead flap in the reconstruction of a hemirhinectomy defect. Application of this technology to these challenging reconstructive scenarios promises to improve accessibility and consistency of results.

Eosinophilic Polymyositis: A Rare Cause of Atraumatic Compartment Syndrome of the Forearm.

Background Eosinophilic polymyositis is a rare disorder in which eosinophils infiltrate muscle and supporting connective tissue structures, resembling autoimmune or immunologically mediated disease. This disorder can be associated with muscle inflammation and death, and can be a cause of atraumatic compartment syndrome. Methods This is a retrospective chart review of a case report as well as review of pertinent literature. Results This report presents a rare case of atraumatic compartment syndrome of the forearm caused by eosinophilic polymyositis. It provides a case summary and histological examination of this patient. Conclusion This is an important case to report because it highlights eosinophilic polymyositis as a unique etiology of compartment syndrome. In appropriate clinical situations where patients do not improve despite standard interventions, one should consider the rare and unusual etiology of compartment syndrome due to eosinophilic polymyositis. Furthermore, primary surgical intervention should not be delayed while waiting to ascertain a definitive diagnosis.

A 3-Dimensional-Printed Hand Model for Home-Based Acquisition of Fracture Fixation Skills Without Fluoroscopy.

OBJECTIVE: To design a low cost ($40), realistic and fluoroscopy-free percutaneous Kirschner wire hand fracture fixation training instrument kit for home-based skill acquisition during the COVID-19 pandemic. DESIGN: A 3D-printed hand was designed from a computed tomography scan of a healthy hand. These data were used to create replaceable hand and wrist bones and reusable silicone molds for a replica of the soft tissue envelope. The model is currently being integrated into the simulation curriculum at 2 integrated plastic surgery residency programs for training in percutaneous wire fixation of hand fractures. SETTING: Brown University, Warren Alpert Medical School of Brown University. Department of Surgery, Division of Plastic and Reconstructive Surgery. Large academic quaternary referral institution. Yale University, Yale School of Medicine. Department of Surgery, Division of Plastic and Reconstructive Surgery. Large academic quaternary referral institution. PARTICIPANTS: PGY 1-4 plastic surgery residents preparing to meet ACGME Accreditation for Graduate Medical Education hand surgery specific milestones. RESULTS: A realistic and durable 3D model with interchangeable bones allows trainees to practice the key motor skills necessary for successful fixation of hand and wrist fractures with K-wires in a home-based setting. CONCLUSIONS: A low cost, realistic and durable 3D hand model with interchangeable bones allows easy integration into any home-based hand surgery curriculum. With 3D printers and programming becoming more prevalent and affordable, such models offer a means of low-cost and safe instruction of residents in fracture fixation with no harm to patients.

A 3D printed suturing trainer for medical students.

BACKGROUND: Medical students must be able to suture competently upon graduation. To learn suturing technique, students must have access to practice materials. The purpose of this pilot study was to develop a novel suturing trainer and to evaluate its ability to provide realistic and accessible suturing practice. A cohort of senior students at one institution compared the device with standard suture-training media (porcine feet and sponges). METHODS: Using 3D printing and silicone casting, a novel suturing trainer was developed and a cohort of senior medical students trialed the device in a standardised suturing workshop. Participants evaluated the novel suturing trainer, porcine feet and sponges for simulating human tissue with regard to: (i) tissue layers; (ii) tissue texture; (iii) ability to perform interrupted suturing; (iv) running subcuticular suturing; and (v) knot tying. RESULTS: Compared with porcine feet and sponges, the suturing trainer had significantly higher mean scores (p < 0.001) for the simulation of human tissue layers and texture, as well as for the ability to facilitate the practice of interrupted suturing, running suturing and knot tying. All (n = 32) participants identified the silicone trainer as the best tool upon which to practice suturing, and 92% (n = 23) responded that their suturing skills would improve if the silicone trainer replaced porcine feet and sponges. DISCUSSION: The silicone suturing device provides a more realistic and accessible suture learning experience than porcine feet and sponges. Further validation is required to assess its long-term effectiveness in medical education.

Heminasal Reconstruction Utilizing Presurgical Planning, Template-Based Cartilage Reconstruction and Tissue Expansion.

Heminasal aplasia is a rare congenital nasal anomaly in which there is unilateral deficiency in both the external nasal anatomy and nasal airway. Unilateral failure in development of a nasal placode in embryogenesis is thought to be the underlying cause of this anomaly. The authors describe the reconstruction of heminasal aplasia in a teenager utilizing a templated cartilaginous framework and tissue expansion. The authors feel the satisfactory results of this technique will be of benefit to other surgeons who may encounter this rare anomaly.

Complex wound closure by plastic surgery following resection of spinal neoplasms minimizes postoperative wound complications in high-risk patients.

OBJECTIVE: Wound breakdown and infection are common postoperative complications following resection of spinal neoplasms. Accordingly, it has become common practice at some centers for plastic surgeons to assist with closure of large posterior defects after spine tumor resection. In this study, the authors tested the hypothesis that plastic surgery closure of complex spinal defects improves wound outcomes following resection of spinal neoplastic disease. METHODS: Electronic medical records of consecutive patients who underwent resection of a spinal neoplasm between June 2015 and January 2019 were retrospectively reviewed. Patients were separated into two subpopulations based on whether the surgical wound was closed by plastic surgery or neurosurgery. Patient demographics, preoperative risk factors, surgical details, and postoperative outcomes were collected in a central database and summarized using descriptive statistics. Outcomes of interest included rates of wound complication, reoperation, and mortality. Known preoperative risk factors for wound complication in spinal oncology were identified based on literature review and grouped categorically. The presence of each category of risk factors was then compared between groups. Univariate and multivariate linear regressions were applied to define associations between individual risk factors and wound complications. RESULTS: One hundred six patients met inclusion criteria, including 60 wounds primarily closed by plastic surgery and 46 by neurosurgery. The plastic surgery population included more patients with systemic metastases (58% vs 37%, p = 0.029), prior radiation (53% vs 17%, p < 0.001), prior chemotherapy (37% vs 15%, p = 0.014), and sacral region tumors (25% vs 7%, p = 0.012), and more patients who underwent procedures requiring larger incisions (7.2 ± 3.6 vs 4.5 ± 2.6 levels, p < 0.001), prolonged operative time (413 ± 161 vs 301 ± 181 minutes, p = 0.001), and greater blood loss (906 ± 1106 vs 283 ± 373 ml, p < 0.001). The average number of risk factor categories present was significantly greater in the plastic surgery group (2.57 vs 1.74, p < 0.001). Despite the higher relative risk, the plastic surgery group did not experience a significantly higher rate of wound complication (28% vs 17%, p = 0.145), reoperation (17% vs 9%, p = 0.234), or all-cause mortality (30% vs 13%, p = 0.076). One patient died from wound-related complications in each group (p = 0.851). Regression analyses identified diabetes, multilevel instrumentation, and BMI as the factors associated with the greatest wound complications. CONCLUSIONS: Involving plastic surgery in the closure of spinal wounds after resection of neoplasms may ameliorate expected increases in wound complications among higher-risk patients.

Partial Suture Fusion in Nonsyndromic Single-Suture Craniosynostosis.

INTRODUCTION: Partial synostosis of cranial sutures has been shown to have clinical and diagnostic significance. However, there is limited published information about how suture fusion progresses over time. In this study, we evaluate patients with nonsyndromic single-suture synostosis. We aim to define the incidence of partial versus complete suture fusion and whether a correlation exists between the degree of suture fusion and age. METHODS: Two hundred fifty-four patients with nonsyndromic single-suture synostosis were evaluated. Preoperative computed tomography (CT) scans were rendered in 3-dimensions, all sutures were visualized and assessed for patency or fusion, and length of fusion was measured. Findings were grouped according to suture type (sagittal, coronal, metopic, or lambdoid), the degree of fusion (full, >50%, or <50%), and patient age at time of CT scan (0-90, 91-180, 181-360, or >360 days). Data were analyzed to correlate patient age versus the degree of suture fusion. RESULTS: For all patients, 72% had complete and 28% had partial synostosis. Ratios of full to partial fusion for each suture type were as follows: sagittal 97:36, coronal 35:22, metopic 46:4, and lambdoid 4:10. The sagittal, coronal, and metopic groups demonstrated greater probabilities of complete suture fusion as patient age increases (P = .021, P < .001, P = .001, respectively). This trend was also noted when all sutures were considered together by age-group (P < .001). CONCLUSION: We note a partial suture fusion rate of 28.3%. Our analysis shows a correlation between the extent of suture synostosis and patient age. Finally, we demonstrate that different sutures display different patterns of partial and complete fusion.

Introduction of Medical Three-Dimensional Printing in Rhode Island.

Since the early 2000s, three-dimensional (3D) printing has become a well-rounded, evolving technology which has begun to revolutionize healthcare. 3D printing enables rapid creation and manufacture of individual patient models from original designs or medical imaging data. These models can be used for surgical planning, procedural training for residents and medical students, and the design and manufacture of surgical instruments, implants and prostheses. Current availability of this advanced technology at the Lifespan 3D Printing Lab permits Rhode Island physicians to utilize 3D printing in multiple, diverse settings to help improve their medical practice and optimize healthcare outcomes. This article describes three case-based examples to demonstrate varies used of 3D printing in Medicine.

Correction of Microstomia Reconstruction With the Use of Acellular Dermal Matrix for Buccal Reconstruction.

Correction of microstomia is challenging with a high rate of recurrence. We report the successful treatment of microstomia using acellular dermal matrix (ADM) as an adjunct for intraoral lining with >1 year of follow-up.A 9-year-old international patient with severe immunodeficiency presented with severe microstomia because of recurrent oral infections. She had undergone 3 previous failed attempts to re-establish an adequate oral opening and was dependent on enteral nutrition via gastrostomy tube. She underwent release of the oral commissure scar contracture and orbicularis oris and the resultant mucosal defect was lined with ADM. A postoperative splint was used for 8 weeks. One-year follow-up demonstrated maintenance of the oral aperture with complete mucosalization of the ADM; the patient was able to resume oral diet and regular dental hygiene.Mucosal reconstruction with ADM is a viable alternative to local flaps and in this case exhibited minimal soft tissue contraction.

PREVELENCE OF PRIMARY ALDOSTERONISM IN AN URBAN HYPERTENSIVE POPULATION.

OBJECTIVE: To determine the prevalence of primary aldosteronism (PA) in hypertensive patients presenting to the primary care clinic at The Mount Sinai Hospital, regardless of the degree of hypertension and to identify clinical criteria that should prompt screening for PA. METHODS: An aldosterone:renin ratio (ARR, cutoff ≥20, with plasma aldosterone concentration [PAC] ≥10 and suppressed renin) was used to prospectively screen 296 hypertensive patients (blood pressure [BP] ≥140/90) over the age of 18 from August 2012 through May 2013. Subjects who screened positive then underwent confirmatory oral salt load testing (OSLT). RESULTS: Of the 296 patients, 14 screened positive for PA, an overall prevalence of 4.7%. Six of the 14 cases underwent confirmatory OSLT, upon which 2 were confirmed positive, for a prevalence of 0.7%. Overall, patients with confirmed PA were more likely to have resistant hypertension (42.9% vs. 18.1% (P = .0334)) and require more antihypertensive agents (2.8 ± 1.2 agents vs. 2.1 ± 1.1 agents, P = .0213). There was a trend toward lower potassium values in the cases. CONCLUSION: The prevalence of PA in our clinic is much lower than in reports from certain "at-risk" populations. PA screening is indicated in patients with resistant hypertension, regardless of serum potassium levels. ABBREVIATIONS: ARR = aldosterone:renin ratio ACTH = adrenocorticotropic hormone AVS = adrenal venous sampling BP = blood pressure MRA = mineralocorticoid receptor antagonist OSLT = oral salt load confirmatory test PA = primary aldosteronism PAC = plasma aldosterone concentration PCP = primary care provider PRA = plasma renin activity.