RESUMEN
The past few years have seen a considerable amount of research devoted to nanostructured transparent conducting materials (TCM), which play a pivotal role in many modern devices such as solar cells, flexible light-emitting devices, touch screens, electromagnetic devices, and flexible transparent thin film heaters. Currently, the most commonly used TCM for such applications (ITO: Indium Tin oxide) suffers from two major drawbacks: brittleness and indium scarcity. Among emerging transparent electrodes, silver nanowire (AgNW) networks appear to be a promising substitute to ITO since such electrically percolating networks exhibit excellent properties with sheet resistance lower than 10 Ω/sq and optical transparency of 90%, fulfilling the requirements of most applications. In addition, AgNW networks also exhibit very good mechanical flexibility. The fabrication of these electrodes involves low-temperature processing steps and scalable methods, thus making them appropriate for future use as low-cost transparent electrodes in flexible electronic devices. This contribution aims to briefly present the main properties of AgNW based transparent electrodes as well as some considerations relating to their efficient integration in devices. The influence of network density, nanowire sizes, and post treatments on the properties of AgNW networks will also be evaluated. In addition to a general overview of AgNW networks, we focus on two important aspects: (i) network instabilities as well as an efficient Atomic Layer Deposition (ALD) coating which clearly enhances AgNW network stability and (ii) modelling to better understand the physical properties of these networks.
RESUMEN
Advancement in the science and technology of random metallic nanowire (MNW) networks is crucial for their appropriate integration in many applications including transparent electrodes for optoelectronics and transparent film heaters. We have recently highlighted the discontinuous activation of efficient percolating pathways (EPPs) for networks having densities slightly above the percolation threshold. Such networks exhibit abrupt drops of electrical resistance when thermal or electrical annealing is performed, which gives rise to a "geometrically quantized percolation". In this Letter, lock-in thermography (LiT) is used to provide visual evidence of geometrical quantized percolation: when low voltage is applied to the network, individual "illuminated pathways" can be detected, and new branches get highlighted as the voltage is incrementally increased. This experimental approach has allowed us to validate our original model and map the electrical and thermal distributions in silver nanowire (AgNW) networks. We also study the effects of electrode morphology and wire dimensions on quantized percolation. Furthermore, we demonstrate that the network failure at high temperature can also be governed by a quantized increase of the electrical resistance, which corresponds to the discontinuous destruction of individual pathways (antipercolation). More generally, we demonstrate that LiT is a promising tool for the detection of conductive subclusters as well as hot spots in AgNW networks.
RESUMEN
The seed capsule of Delosperma nakurense is a remarkable example of a natural hygromorph, which unfolds its protecting valves upon wetting to expose its seeds. The beautiful mechanism responsible for this motion is generated by a specialized organ based on an anisotropic cellular tissue filled with a highly swelling material. Inspired by this system, we study the mechanics of a diamond honeycomb internally pressurized by a fluid phase. Numerical homogenization by means of iterative finite-element (FE) simulations is adapted to the case of cellular materials filled with a variable pressure fluid phase. Like its biological counterpart, it is shown that the material architecture controls and guides the otherwise unspecific isotropic expansion of the fluid. Deformations up to twice the original dimensions can be achieved by simply setting the value of input pressure. In turn, these deformations cause a marked change of the honeycomb geometry and hence promote a stiffening of the material along the weak direction. To understand the mechanism further, we also developed a micromechanical model based on the Born model for crystal elasticity to find an explicit relation between honeycomb geometry, swelling eigenstrains and elastic properties. The micromechanical model is in good qualitative agreement with the FE simulations. Moreover, we also provide the force-stroke characteristics of a soft actuator based on the pressurized anisotropic honeycomb and show how the internal pressure has a nonlinear effect which can result in negative values of the in-plane Poisson's ratio. As nature shows in the case of the D. nakurense seed capsule, cellular materials can be used not only as low-weight structural materials, but also as simple but convenient actuating materials.
Asunto(s)
Caryophyllaceae/fisiología , Pared Celular/química , Semillas/fisiología , Anisotropía , Fenómenos Biomecánicos , Simulación por Computador , Cristalización , Elasticidad , Análisis de Elementos Finitos , Movimiento (Física) , Distribución de Poisson , Presión , Estrés MecánicoRESUMEN
The concept of novel responsive materials with a displacement conversion capability was further developed through the design of new machine-augmented composites (MACs). Embedded converter machines and MACs with improved geometry were designed and fabricated by multi-material 3D printing. This technique proved to be very effective in fabricating these novel composites with tuneable elastic moduli of the matrix and the embedded machines and excellent bonding between them. Substantial improvement in the displacement conversion efficiency of the new MACs over the existing ones was demonstrated. Also, the new design trebled the energy absorption of the MACs. Applications in energy absorbers as well as mechanical sensors and actuators are thus envisaged. A further type of MACs with conversion ability, viz. conversion of compressive displacements to torsional ones, was also proposed.
RESUMEN
Interactions between proteins and material or cellular surfaces are able to trigger protein aggregation in vitro and in vivo. The human insulin peptide segment LVEALYL is able to accelerate insulin aggregation in the presence of hydrophobic surfaces. We show that this peptide needs to be previously adsorbed on a hydrophobic surface to induce insulin aggregation. Moreover, the study of different mutant peptides proves that its sequence is less important than the secondary structure of the adsorbed peptide on the surface. Indeed, these pro-aggregative peptides act by providing stable ß-sheets to incoming insulin molecules, thereby accelerating insulin adsorption locally and facilitating the conformational changes required for insulin aggregation. Conversely, a peptide known to form α-helices on hydrophobic surfaces delays insulin aggregation.
Asunto(s)
Amiloide/metabolismo , Interacciones Hidrofóbicas e Hidrofílicas , Insulina/metabolismo , Fragmentos de Péptidos/química , Fragmentos de Péptidos/farmacología , Multimerización de Proteína/efectos de los fármacos , Adsorción , Secuencia de Aminoácidos , Amiloide/química , Humanos , Insulina/química , Cinética , Mutación , Fragmentos de Péptidos/genética , Fragmentos de Péptidos/metabolismo , Estructura Secundaria de Proteína , Propiedades de SuperficieRESUMEN
The formation of insulin amyloidal aggregates on material surfaces is a well-known phenomenon with important pharmaceutical and medical implications. Using surface plasmon resonance imaging, we monitor insulin adsorption on model hydrophobic surfaces in real time. Insulin adsorbs in two phases: first, a very fast phase (less than 1 min), where a protein monolayer forms, followed by a slower one that can last for at least 1h, where multilayered protein aggregates are present. The dissociation kinetics reveals the presence of two insulin populations that slowly interconvert: a rapidly dissociating pool and a pool of strongly bound insulin aggregates. After 1h of contact between the protein solution and the surface, the adsorbed insulin has practically stopped dissociating from the surface. The conformation of adsorbed insulin is probed by attenuated total reflection-Fourier transform infrared spectroscopy. Characteristic shifts in the amide A and amide II' bands are associated with insulin adsorption. The amide I band is also distinct from that of soluble or aggregated insulin, and it slowly evolves in time. A 1708 cm⻹ peak is observed, which characterizes insulin adsorbed for times longer than 30 min. Finally, Thioflavin T, a marker of extended ß-sheet structures present in amyloid fibers, binds to adsorbed insulin after 30-40 min. Altogether, these results reveal that the conformational change induced in insulin upon binding to hydrophobic surfaces allows further insulin binding from the solution. Adsorbed insulin is thus an intermediate along the α-to-ß structural transition that results in the formation of amyloidal fibers on these material surfaces.
Asunto(s)
Amiloide/química , Interacciones Hidrofóbicas e Hidrofílicas , Insulina/química , Insulina/metabolismo , Adsorción , Calibración , Humanos , Cinética , Estructura Cuaternaria de Proteína , Espectroscopía Infrarroja por Transformada de Fourier , Resonancia por Plasmón de Superficie , Propiedades de Superficie , Factores de TiempoRESUMEN
This study investigated how substrate geometry influences in-vitro tissue formation at length scales much larger than a single cell. Two-millimetre thick hydroxyapatite plates containing circular pores and semi-circular channels of 0.5 mm radius, mimicking osteons and hemi-osteons respectively, were incubated with MC3T3-E1 cells for 4 weeks. The amount and shape of the tissue formed in the pores, as measured using phase contrast microscopy, depended on the substrate geometry. It was further demonstrated, using a simple geometric model, that the observed curvature-controlled growth can be derived from the assembly of tensile elements on a curved substrate. These tensile elements are cells anchored on distant points of the curved surface, thus creating an actin "chord" by generating tension between the adhesion sites. Such a chord model was used to link the shape of the substrate to cell organisation and tissue patterning. In a pore with a circular cross-section, tissue growth increases the average curvature of the surface, whereas a semi-circular channel tends to be flattened out. Thereby, a single mechanism could describe new tissue growth in both cortical and trabecular bone after resorption due to remodelling. These similarities between in-vitro and in-vivo patterns suggest geometry as an important signal for bone remodelling.
Asunto(s)
Remodelación Ósea/fisiología , Modelos Biológicos , Osteoblastos/citología , Osteoblastos/fisiología , Células 3T3 , Animales , Fenómenos Biomecánicos , Sustitutos de Huesos , Durapatita , Ratones , Microscopía de Contraste de Fase , Osteogénesis/fisiología , Transducción de Señal , Resistencia a la Tracción , Andamios del TejidoRESUMEN
Using a radial flow chamber, we study Saccharomyces cerevisiae kinetics of detachment from stainless steel substrates. Samples of similar surface chemistry, but with different surface topologies are compared: mirror polished and electro-chemically etched. Different grain sizes (20, 40 and 100 microm) and different etching depths (100-650 nm) are tested. Cells are removed from the substrate according to a first-order kinetics defining two macroscopic parameters that depend on the applied stress: the detachment efficiency and the detachment rate constant. Whatever the surface topology, detachment occurs above a threshold and its rate is strongly stimulated by the applied stress. The detachment efficiency is characterized by the shear stress at which half of the cells detach and is independent of surface topology. In contrast, detachment is faster from etched than mirror polished surfaces. Finally, we also show the preferential adhesion of yeast cells to grains of < 001 > crystallographic orientation with respect to the surface.
Asunto(s)
Adhesión Bacteriana/fisiología , Saccharomyces cerevisiae/química , Acero Inoxidable/química , Adhesión Bacteriana/genética , Cinética , Estrés Mecánico , Propiedades de SuperficieRESUMEN
We investigate the remodeling process of trabecular bone inside a human vertebral body using a stochastic lattice model, in which the ability of living bone to adapt to mechanical stimuli is incorporated. Our simulations show the emergence of a networklike structure similar to real trabecular bone. With time, the bone volume fraction reaches a steady state. The microstructure, however, coarsens with a typical length in the system following a power law. The simulation results suggest that a coarsening of the trabecular structure should occur as a natural aging phenomenon, not related to disease.
Asunto(s)
Envejecimiento/fisiología , Matriz Ósea/fisiología , Remodelación Ósea/fisiología , Matriz Extracelular/fisiología , Mecanotransducción Celular/fisiología , Modelos Biológicos , Columna Vertebral/fisiología , Adaptación Fisiológica/fisiología , Animales , Simulación por Computador , Humanos , Modelos Estadísticos , Procesos EstocásticosRESUMEN
Application of a mild hydrodynamic shear stress to Dicytostelium discoideum cells, unable to detach cells passively from the substrate, triggers a cellular response consisting of steady membrane peeling at the rear edge of the cell and periodic cell contact extensions at its front edge. Both processes require an active actin cytoskeleton. The cell movement induced by the hydrodynamic forces is very similar to amoeboid cell motion during chemotaxis, as for its kinematic parameters and for the involvement of phosphatidylinositol(3,4,5)-trisphosphate internal gradient to maintain cell polarity. Inhibition of phosphoinositide 3-kinases by LY294002 randomizes the orientation of cell movement with respect to the flow without modifying cell speed. Two independent signaling pathways are, therefore, induced in D. discoideum in response to external forces. The first increases the frequency of pseudopodium extension, whereas the second redirects the actin cytoskeleton polymerization machinery to the edge opposite to the stressed side of the cell.
Asunto(s)
Quimiotaxis/fisiología , Dictyostelium/fisiología , Transducción de Señal/fisiología , Actinas/fisiología , Animales , Adhesión Celular , Cromonas/farmacología , Citoesqueleto/fisiología , Inhibidores Enzimáticos/farmacología , Morfolinas/farmacología , Fosfatidilinositol 3-Quinasas/metabolismo , Fosfatidilinositoles/metabolismo , Inhibidores de las Quinasa Fosfoinosítidos-3 , Resistencia al CorteRESUMEN
We present a direct optical observation of the behavior of the contact area between a living cell (Dictyostelium discoideum) and a solid substrate under shear flow. It is shown that the membrane is peeled off the substrate. The relationship between the peeling velocity and the applied force is obtained experimentally and explained from the behavior of individual adhesion bridges. The dissipation occurring during the peeling process is explicitly calculated in terms of out-of-equilibrium thermodynamics.
Asunto(s)
Movimiento Celular/fisiología , Dictyostelium/citología , Modelos Biológicos , Animales , Adhesión Celular/fisiología , Propiedades de SuperficieRESUMEN
Using Dictyostelium discoideum as a model organism of specific and nonspecific adhesion, we studied the kinetics of shear flow-induced cell detachment. For a given cell, detachment occurs for values of the applied hydrodynamic stress above a threshold. Cells are removed from the substrate with an apparent first-order rate constant that strongly depends on the applied stress. The threshold stress depends on cell size and physicochemical properties of the substrate, but is not affected by depolymerization of the actin and tubulin cytoskeleton. In contrast, the kinetics of cell detachment is almost independent of cell size, but is strongly affected by a modification of the substrate and the presence of an intact actin cytoskeleton. These results are interpreted in the framework of a peeling model. The threshold stress and the cell-detachment rate measure the local equilibrium energy and the dissociation rate constant of the adhesion bridges, respectively.
Asunto(s)
Adhesión Celular/fisiología , Dictyostelium/fisiología , Animales , División Celular , Tamaño de la Célula , Dictyostelium/citología , Cinética , Matemática , Modelos Biológicos , Movimiento , Estrés MecánicoRESUMEN
Among the different assays to measure cell adhesion, shear-flow detachment chambers offer the advantage to study both passive and active aspects of the phenomena on large cell numbers. Mathematical modeling allows full exploitation of the data by relating molecular parameters to cell mechanics. Using D. discoideum as a model system, we explain how cell detachment kinetics gives access to the rate constants describing the passive association or dissociation of the cell membrane to a given substrate.