Electrophysiological properties of dorsal root ganglion neurons cultured on 3D silicon micro-pillar substrates.

BACKGROUND: Silicon-based micro-pillar substrates (MPS), as three-dimensional cell culture platforms with vertically aligned micro-patterned scaffolding structures, are known to facilitate high-quality growth and morphology of dorsal root ganglion (DRG) sensory neurons, promote neurite outgrowth and enhance neurite alignment. However, the electrophysiological aspects of DRG neurons cultured on silicon MPSs have not been thoroughly investigated, which is of greatest importance to ensure that such substrates do not disrupt neuronal homeostasis and function before their widespread adoption in diverse biomedical applications. NEW METHOD: We conducted whole-cell patch-clamp recordings to explore the electrophysiological properties of DRG neurons cultured on MPS arrays, utilizing a custom-made upright patch-clamp setup. RESULTS: Our findings revealed that DRG neurons exhibited similar electrophysiological responses on patterned MPS samples when compared to the control planar glass surfaces. Notably, there were no significant differences observed in the action potential parameters or firing patterns of action potentials between neurons grown on either substrate. COMPARISON WITH EXISTING METHODS: In the current study we for the first time confirmed that successful electrophysiological recordings can be obtained from the cells grown on MPS. CONCLUSION: Our results imply that, despite the potential alterations caused by the cumulative trauma of tissue harvest and cell dissociation, essential functional cell properties of DRG neurons appear to be relatively maintained on MPS surfaces. Therefore, vertically aligned silicon MPSs could be considered as a potentially effective three-dimensional system for supporting a controlled cellular environment in culture.

Using Compound Neural Action Potentials for Functional Validation of a High-Density Intraneural Interface: A Preliminary Study.

Compound nerve action potentials (CNAPs) were used as a metric to assess the stimulation performance of a novel high-density, transverse, intrafascicular electrode in rat models. We show characteristic CNAPs recorded from distally implanted cuff electrodes. Evaluation of the CNAPs as a function of stimulus current and calculation of recruitment plots were used to obtain a qualitative approximation of the neural interface's placement and orientation inside the nerve. This method avoids elaborate surgeries required for the implantation of EMG electrodes and thus minimizes surgical complications and may accelerate the healing process of the implanted subject.

Optimizing mRNA transfection on a high-definition electroporation microelectrode array results in 98% efficiency and multiplexed gene delivery.

Spatially resolved transfection, intracellular delivery of proteins and nucleic acids, has the potential to drastically speed up the discovery of biologically active cargos, for instance for the development of cell therapies or new genome engineering tools. We recently demonstrated the use of a high-density microelectrode array for the targeted electrotransfection of cells grown on its surface, a process called High-Definition Electroporation (HD-EP). We also developed a framework based on Design of Experiments to quickly establish optimized electroporation conditions across five different electrical pulse parameters. Here, we used this framework to optimize the transfection efficiency of primary fibroblasts with a mCherry-encoding mRNA, resulting in 98% of the cells expressing the desired fluorescent protein without any sign of cell death. That transfection yield is the highest reported so far for electroporation. Moreover, varying the pulse number was shown to modulate the fluorescence intensity of cells, indicating the dosage-controlled delivery of mRNA and protein expression. Finally, exploiting the single-electrode addressability of the microelectrode array, we demonstrated spatially resolved, high efficiency, sequential transfection of cells with three distinct mRNAs. Since the chip can be easily redesigned to feature a much large number of electrodes, we anticipate that this methodology will enable the development of dedicated screening platforms for analysis of mRNA variants at scale.

High-definition electroporation: Precise and efficient transfection on a microelectrode array.

Intracellular delivery is critical for a plethora of biomedical applications, including mRNA transfection and gene editing. High transfection efficiency and low cytotoxicity, however, are often beyond the capabilities of bulk techniques and synonymous with extensive empirical optimization. Moreover, bulk techniques are not amenable to large screening applications. Here, we propose an expeditious workflow for achieving optimal electroporation-based intracellular delivery. Using the multiplexing ability of a high-definition microelectrode array (MEA) chip, we performed a sequence of carefully designed experiments, multiple linear regression modelling and validation to obtain optimal conditions for on-chip electroporation of primary fibroblasts. Five electric pulse parameters were varied to generate 32 different electroporation conditions. The effect of the parameters on cytotoxicity and intracellular delivery could be evaluated with just two experiments. Most successful electroporation conditions resulted in no cell death, highlighting the low cytotoxicity of on-chip electroporation. The resulting delivery models were then used to achieve dosage-controlled delivery of small molecules, delivery of Cas9-GFP single-guide RNA complexes and transfection with an mCherry-encoding mRNA, resulting in previously unreported high-efficiency, single-cell transfection on MEAs: cells expressed mCherry on 81% of the actuated electrodes, underscoring the vast potential of CMOS MEA technology for the transfection of primary cells.

Do we still need animals? Surveying the role of animal-free models in Alzheimer's and Parkinson's disease research.

The use of animals in neuroscience and biomedical research remains controversial. Policy is built around the "3R" principle of "Refining, Reducing and Replacing" animal experiments, and across the globe, different initiatives stimulate the use of animal-free methods. Based on an extensive literature screen to map the development and adoption of animal-free methods in Alzheimer's and Parkinson's disease research, we find that at least two in three examined studies rely on animals or on animal-derived models. Among the animal-free studies, the relative contribution of innovative models that may replace animal experiments is limited. We argue that the distinction between animal research and alternative models presents a false dichotomy, as the role and scientific value of both animal and animal-free approaches are intertwined. Calls to halt all animal experiments appear premature, as insufficient non-animal-based alternatives are available and their development lags behind. In light of this, we highlight the need for objective, unprejudiced monitoring, and more robust performance indicators of animal-free approaches.

Chronic chemogenetic stimulation of the anterior olfactory nucleus reduces newborn neuron survival in the adult mouse olfactory bulb.

During adult rodent life, newborn neurons are added to the olfactory bulb (OB) in a tightly controlled manner. Upon arrival in the OB, input synapses from the local bulbar network and the higher olfactory cortex precede the formation of functional output synapses, indicating a possible role for these regions in newborn neuron survival. An interplay between the environment and the piriform cortex in the regulation of newborn neuron survival has been suggested. However, the specific network and the neuronal cell types responsible for this effect have not been elucidated. Furthermore, the role of the other olfactory cortical areas in this process is not known. Here we demonstrate that pyramidal neurons in the mouse anterior olfactory nucleus, the first cortical area for odor processing, have a key role in the survival of newborn neurons. Using DREADD (Designer Receptors Exclusively Activated by Designer Drugs) technology, we applied chronic stimulation to the anterior olfactory nucleus and observed a decrease in newborn neurons in the OB through induction of apoptosis. These findings provide further insight into the network regulating neuronal survival in adult neurogenesis and strengthen the importance of the surrounding network for sustained integration of new neurons.

Single-cell transfection technologies for cell therapies and gene editing.

Advances in gene editing and cell therapies have recently led to outstanding clinical successes. However, the lack of a cost-effective manufacturing process prevents the democratization of these innovative medical tools. Due to the common use of viral vectors, the step of transfection in which cells are engineered to gain new functions, is a major bottleneck in making safe and affordable cell products. A promising opportunity lies in Single-Cell Transfection Technologies (SCTTs). SCTTs have demonstrated higher efficiency, safety and scalability than conventional transfection methods. They can also feature unique abilities such as substantial dosage control over the cargo delivery, single-cell addressability and integration in microdevices comprising multiple monitoring modalities. Unfortunately, the potential of SCTTs is not fully appreciated: they are most often restricted to research settings with little adoption in clinical settings. To encourage their adoption, we review and compare recent developments in SCTTs, and how they can enable selected clinical applications. To help bridge the gap between fundamental research and its translation to the clinic, we also describe how Good Manufacturing Practices (GMP) can be integrated in the design of SCTTs.

Fast compressive lens-free tomography for 3D biological cell culture imaging.

We present a compressive lens-free technique that performs tomographic imaging across a cubic millimeter-scale volume from highly sparse data. Compared with existing lens-free 3D microscopy systems, our method requires an order of magnitude fewer multi-angle illuminations for tomographic reconstruction, leading to a compact, cost-effective and scanning-free setup with a reduced data acquisition time to enable high-throughput 3D imaging of dynamic biological processes. We apply a fast proximal gradient algorithm with composite regularization to address the ill-posed tomographic inverse problem. Using simulated data, we show that the proposed method can achieve a reconstruction speed ∼10× faster than the state-of-the-art inverse problem approach in 3D lens-free microscopy. We experimentally validate the effectiveness of our method by imaging a resolution test chart and polystyrene beads, demonstrating its capability to resolve micron-size features in both lateral and axial directions. Furthermore, tomographic reconstruction results of neuronspheres and intestinal organoids reveal the potential of this 3D imaging technique for high-resolution and high-throughput biological applications.

INSPIRE: A European training network to foster research and training in cardiovascular safety pharmacology.

Safety pharmacology is an essential part of drug development aiming to identify, evaluate and investigate undesirable pharmacodynamic properties of a drug primarily prior to clinical trials. In particular, cardiovascular adverse drug reactions (ADR) have halted many drug development programs. Safety pharmacology has successfully implemented a screening strategy to detect cardiovascular liabilities, but there is room for further refinement. In this setting, we present the INSPIRE project, a European Training Network in safety pharmacology for Early Stage Researchers (ESRs), funded by the European Commission's H2020-MSCA-ITN programme. INSPIRE has recruited 15 ESR fellows that will conduct an individual PhD-research project for a period of 36 months. INSPIRE aims to be complementary to ongoing research initiatives. With this as a goal, an inventory of collaborative research initiatives in safety pharmacology was created and the ESR projects have been designed to be complementary to this roadmap. Overall, INSPIRE aims to improve cardiovascular safety evaluation, either by investigating technological innovations or by adding mechanistic insight in emerging safety concerns, as observed in the field of cardio-oncology. Finally, in addition to its hands-on research pillar, INSPIRE will organize a number of summer schools and workshops that will be open to the wider community as well. In summary, INSPIRE aims to foster both research and training in safety pharmacology and hopes to inspire the future generation of safety scientists.

High-Density Electrical Recording and Impedance Imaging With a Multi-Modal CMOS Multi-Electrode Array Chip.

Multi-electrode arrays, both active or passive, emerged as ideal technologies to unveil intricated electrophysiological dynamics of cells and tissues. Active MEAs, designed using complementary metal oxide semiconductor technology (CMOS), stand over passive devices thanks to the possibility of achieving single-cell resolution, the reduced electrode size, the reduced crosstalk and the higher functionality and portability. Nevertheless, most of the reported CMOS MEA systems mainly rely on a single operational modality, which strongly hampers the applicability range of a single device. This can be a limiting factor considering that most biological and electrophysiological dynamics are often based on the synergy of multiple and complex mechanisms acting from different angles on the same phenomena. Here, we designed a CMOS MEA chip with 16,384 titanium nitride electrodes, 6 independent operational modalities and 1,024 parallel recording channels for neuro-electrophysiological studies. Sixteen independent active areas are patterned on the chip surface forming a 4 × 4 matrix, each one including 1,024 electrodes. Electrodes of four different sizes are present on the chip surface, ranging from 2.5 × 3.5 µm2 up to 11 × 11.0 µm2, with 15 µm pitch. In this paper, we exploited the impedance monitoring and voltage recording modalities not only to monitor the growth and development of primary rat hippocampal neurons, but also to assess their electrophysiological activity over time showing a mean spike amplitude of 144.8 ± 84.6 µV. Fixed frequency (1 kHz) and high sampling rate (30 kHz) impedance measurements were used to evaluate the cellular adhesion and growth on the chip surface. Thanks to the high-density configuration of the electrodes, as well as their dimension and pitch, the chip can appreciate the evolutions of the cell culture morphology starting from the moment of the seeding up to mature culture conditions. The measurements were confirmed by fluorescent staining. The effect of the different electrode sizes on the spike amplitudes and noise were also discussed. The multi-modality of the presented CMOS MEA allows for the simultaneous assessment of different physiological properties of the cultured neurons. Therefore, it can pave the way both to answer complex fundamental neuroscience questions as well as to aid the current drug-development paradigm.

Pixel super-resolution for lens-free holographic microscopy using deep learning neural networks.

Lens-free holographic microscopy (LFHM) provides a cost-effective tool for large field-of-view imaging in various biomedical applications. However, due to the unit optical magnification, its spatial resolution is limited by the pixel size of the imager. Pixel super-resolution (PSR) technique tackles this problem by using a series of sub-pixel shifted low-resolution (LR) lens-free holograms to form the high-resolution (HR) hologram. Conventional iterative PSR methods require a large number of measurements and a time-consuming reconstruction process, limiting the throughput of LFHM in practice. Here we report a deep learning-based PSR approach to enhance the resolution of LFHM. Compared with the existing PSR methods, our neural network-based approach outputs the HR hologram in an end-to-end fashion and maintains consistency in resolution improvement with a reduced number of LR holograms. Moreover, by exploiting the resolution degradation model in the imaging process, the network can be trained with a data set synthesized from the LR hologram itself without resorting to the HR ground truth. We validated the effectiveness and the robustness of our method by imaging various types of samples using a single network trained on an entirely different data set. This deep learning-based PSR approach can significantly accelerate both the data acquisition and the HR hologram reconstruction processes, therefore providing a practical solution to fast, lens-free, super-resolution imaging.

Guided growth with aligned neurites in adult spiral ganglion neurons cultured in vitro on silicon micro-pillar substrates.

OBJECTIVE: Assessment of the relationship between the topographical organization of silicon micro-pillar surfaces (MPS) on guidance and neural alignment of adult spiral ganglion neurons (SGN) and use of the otosurgical approach as an alternative for the extraction and isolation of SGNs from adult guinea pigs. APPROACH: SGNs from adult guinea pigs were isolated using conventional and otosurgical approach for in vitro cell culturing on MPS of various micro-pillar widths (1-5.6 µm) and spacing (0.6-15 µm). Cell cultures were compared morphologically with neuronal cultures on control glass coverslips. MAIN RESULTS: We found enhanced SGN in vitro cultures in MPS areas with small and intermediate inter-pillar spacing (from 0.6 µm to 3.2 µm) as well as in MPS areas with wider pillars (from 1.8 µm to 4 µm) compared to MPS flat zones and control glass coverslips. Scanning electron microscopy (SEM) images highlighted how neurites of SGNs follow straight lines by growing on top and between micro-pillars. Only micro-pillars with small and intermediate pillar spacings favor neurite alignment along preferred angles (30°, 90°, and 150°), while pillars with wider spacing produced less aligned neurites. We found propensity of adult SGNs grown on MPSs to attain more bipolar and multipolar morphologies. Additionally, we observed reduced interaction between neuronal and glial cells compared to control glass coverslips. Finally, we found that the otosurgical approach was more beneficial for SGN survival on glass coverslips and MPS flat surfaces than the conventional method. SIGNIFICANCE: MPS with specific architecture supports the guided growth of adult SGNs in vitro and controls adult SGN development and behavior.

A Micropatterned Multielectrode Shell for 3D Spatiotemporal Recording from Live Cells.

Microelectrode arrays (MEAs) have proved to be useful tools for characterizing electrically active cells such as cardiomyocytes and neurons. While there exist a number of integrated electronic chips for recording from small populations or even single cells, they rely primarily on the interface between the cells and 2D flat electrodes. Here, an approach that utilizes residual stress-based self-folding to create individually addressable multielectrode interfaces that wrap around the cell in 3D and function as an electrical shell-like recording device is described. These devices are optically transparent, allowing for simultaneous fluorescence imaging. Cell viability is maintained during and after electrode wrapping around the cel and chemicals can diffuse into and out of the self-folding devices. It is further shown that 3D spatiotemporal recordings are possible and that the action potentials recorded from cultured neonatal rat ventricular cardiomyocytes display significantly higher signal-to-noise ratios in comparison with signals recorded with planar extracellular electrodes. It is anticipated that this device can provide the foundation for the development of new-generation MEAs where dynamic electrode-cell interfacing and recording substitutes the traditional method using static electrodes.

Advantageous environment of micro-patterned, high-density complementary metal-oxide-semiconductor electrode array for spiral ganglion neurons cultured in vitro.

This study investigated micro-patterned, high-density complementary metal-oxide-semiconductor (CMOS) electrode array to be used as biologically permissive environment for organization, guidance and electrical stimulation of spiral ganglion neurons (SGN). SGNs extracted and isolated from cochleae of P5-P7 rat pups and adult guinea pigs were cultured 1, 4 and 7 days in vitro on glass coverslips (control) and CMOS electrode array. The cultures were analyzed visually and immunohistochemically for SGN presence, outgrowth, neurite alignment, neurite length, neurite asymmetry as well as the contact of a neuronal soma and neurites with the micro-electrodes. Our findings indicate that topographical environment of CMOS chip with micro-patterned pillars enhanced growth, survival, morphology, neural orientation and alignment of SGNs in vitro compared to control. Smaller spacing (0.8-1.6 µm) between protruding pillars on CMOS led SGNs to develop structured and guided neurites oriented along three topographical axes separated by 60°. We found morphological basis for positioning of the micro-electrodes on the chip that was appropriate for direct contact of SGNs with them. This configuration allowed CMOS electrode array to electrically stimulate the SGN whose responses were observed with live Fluo 4 calcium imaging.

Reflective lens-free imaging on high-density silicon microelectrode arrays for monitoring and evaluation of in vitro cardiac contractility.

The high rate of drug attrition caused by cardiotoxicity is a major challenge for drug development. Here, we developed a reflective lens-free imaging (RLFI) approach to non-invasively record in vitro cell deformation in cardiac monolayers with high temporal (169 fps) and non-reconstructed spatial resolution (352 µm) over a field-of-view of maximally 57 mm2. The method is compatible with opaque surfaces and silicon-based devices. Further, we demonstrated that the system can detect the impairment of both contractility and fast excitation waves in cardiac monolayers. Additionally, the RLFI device was implemented on a CMOS-based microelectrode array to retrieve multi-parametric information of cardiac cells, thereby offering more in-depth analysis of drug-induced (cardiomyopathic) effects for preclinical cardiotoxicity screening applications.

Proximal and distal modulation of neural activity by spatially confined optogenetic activation with an integrated high-density optoelectrode.

Optogenetic manipulations are widely used for investigating the contribution of genetically identified cell types to behavior. Simultaneous electrophysiological recordings are less common, although they are critical for characterizing the specific impact of optogenetic manipulations on neural circuits in vivo. This is at least in part because combining photostimulation with large-scale electrophysiological recordings remains technically challenging, which also poses a limitation for performing extracellular identification experiments. Currently available interfaces that guide light of the appropriate wavelength into the brain combined with an electrophysiological modality suffer from various drawbacks such as a bulky size, low spatial resolution, heat dissipation, or photovoltaic artifacts. To address these challenges, we have designed and fabricated an integrated ultrathin neural interface with 12 optical outputs and 24 electrodes. We used the device to measure the effect of localized stimulation in the anterior olfactory cortex, a paleocortical structure involved in olfactory processing. Our experiments in adult mice demonstrate that because of its small dimensions, our novel tool causes far less tissue damage than commercially available devices. Moreover, optical stimulation and recording can be performed simultaneously, with no measurable electrical artifact during optical stimulation. Importantly, optical stimulation can be confined to small volumes with approximately single-cortical layer thickness. Finally, we find that even highly localized optical stimulation causes inhibition at more distant sites. NEW & NOTEWORTHY In this study, we establish a novel tool for simultaneous extracellular recording and optogenetic photostimulation. Because the device is built using established microchip technology, it can be fabricated with high reproducibility and reliability. We further show that even very localized stimulation affects neural firing far beyond the stimulation site. This demonstrates the difficulty in predicting circuit-level effects of optogenetic manipulations and highlights the importance of closely monitoring neural activity in optogenetic experiments.

Current Strategies and Future Perspectives of Skin-on-a-Chip Platforms: Innovations, Technical Challenges and Commercial Outlook.

The skin is the largest and most exposed organ in the human body. Not only it is involved in numerous biological processes essential for life but also it represents a significant endpoint for the application of pharmaceuticals. The area of in vitro skin tissue engineering has been progressing extensively in recent years. Advanced in vitro human skin models strongly impact the discovery of new drugs thanks to the enhanced screening efficiency and reliability. Nowadays, animal models are largely employed at the preclinical stage of new pharmaceutical compounds development for both risk assessment evaluation and pharmacokinetic studies. On the other hand, animal models often insufficiently foresee the human reaction due to the variations in skin immunity and physiology. Skin-on-chips devices offer innovative and state-of-the-art platforms essential to overcome these limitations. In the present review, we focus on the contribution of skin-on-chip platforms in fundamental research and applied medical research. In addition, we also highlighted the technical and practical difficulties that must be overcome to enhance skin-on-chip platforms, e.g. embedding electrical measurements, for improved modeling of human diseases as well as of new drug discovery and development.

Brain-on-a-chip Devices for Drug Screening and Disease Modeling Applications.

Neurodegenerative disorders are related to the progressive functional loss of the brain, often connected to emotional and physical disability and, ultimately, to death. These disorders, strongly connected to the aging process, are becoming increasingly more relevant due to the increase of life expectancy. Current pharmaceutical treatments poorly tackle these diseases, mainly acting only on their symptomology. One of the main reasons of this is the current drug development process, which is not only expensive and time-consuming but, also, still strongly relies on animal models at the preclinical stage. Organ-on-a-chip platforms have the potential to strongly impact and improve the drug screening process by recreating in vitro the functionality of human organs. Patient-derived neurons from different regions of the brain can be directly grown and differentiated on a brain-on-a-chip device where the disease development, progression and pharmacological treatments can be studied and monitored in real time. The model reliability is strongly improved by using human-derived cells, more relevant than animal models for pharmacological screening and disease monitoring. The selected cells will be then capable of proliferating and organizing themselves in the in vivo environment thanks to the device architecture, materials selection and bio-chemical functionalization. In this review, we start by presenting the fundamental strategies adopted for brain-on-a-chip devices fabrication including e.g., photolithography, micromachining and 3D printing technology. Then, we discuss the state-of-theart of brain-on-a-chip platforms including their role in the study of the functional architecture of the brain e.g., blood-brain barrier, or of the most diffuse neurodegenerative diseases like Alzheimer's and Parkinson's. At last, the current limitations and future perspectives of this approach for the development of new drugs and neurodegenerative diseases modeling will be discussed.

Microelectrode array-induced neuronal alignment directs neurite outgrowth: analysis using a fast Fourier transform (FFT).

Many studies have shown that the topography of the substrate on which neurons are cultured can promote neuronal adhesion and guide neurite outgrowth in the same direction as the underlying topography. To investigate this effect, isotropic substrate-complementary metal-oxide-semiconductor (CMOS) chips were used as one example of microelectrode arrays (MEAs) for directing neurite growth of spiral ganglion neurons. Neurons were isolated from 5 to 7-day-old rat pups, cultured 1 day in vitro (DIV) and 4 DIV, and then fixed with 4% paraformaldehyde. For analysis of neurite alignment and orientation, fast Fourier transformation (FFT) was used. Results revealed that on the micro-patterned surface of a CMOS chip, neurons orient their neurites along three directional axes at 30, 90, and 150° and that neurites aligned in straight lines between adjacent pillars and mostly followed a single direction while occasionally branching perpendicularly. We conclude that the CMOS substrate guides neurites towards electrodes by means of their structured pillar organization and can produce electrical stimulation of aligned neurons as well as monitoring their neural activities once neurites are in the vicinity of electrodes. These findings are of particular interest for neural tissue engineering with the ultimate goal of developing a new generation of MEA essential for improved electrical stimulation of auditory neurons.