RESUMEN
We present the development of an experimental platform that can collect four frames of x-ray diffraction data along a single line of sight during laser-driven, dynamic-compression experiments at the National Ignition Facility. The platform is comprised of a diagnostic imager built around ultrafast sensors with a 2-ns integration time, a custom target assembly that serves also to shield the imager, and a 10-ns duration, quasi-monochromatic x-ray source produced by laser-generated plasma. We demonstrate the performance with diffraction data for Pb ramp compressed to 150 GPa and illuminated by a Ge x-ray source that produces â¼7 × 1011, 10.25-keV photons/ns at the 400 µm diameter sample.
RESUMEN
Large laser facilities have recently enabled material characterization at the pressures of Earth and Super-Earth cores. However, the temperature of the compressed materials has been largely unknown, or solely relied on models and simulations, due to lack of diagnostics under these challenging conditions. Here, we report on temperature, density, pressure, and local structure of copper determined from extended x-ray absorption fine structure and velocimetry up to 1 Terapascal. These results nearly double the highest pressure at which extended x-ray absorption fine structure has been reported in any material. In this work, the copper temperature is unexpectedly found to be much higher than predicted when adjacent to diamond layer(s), demonstrating the important influence of the sample environment on the thermal state of materials; this effect may introduce additional temperature uncertainties in some previous experiments using diamond and provides new guidance for future experimental design.
RESUMEN
New techniques are advancing the frontier of high-pressure physics beyond 1 terapascal, leading to new discoveries and offering stringent tests for condensed-matter theory and advanced numerical methods. However, the ability to absolutely determine the pressure state remains challenging, and well-calibrated pressure-density reference materials are required. We conducted shockless dynamic compression experiments at the National Ignition Facility and the Z machine to obtain quasi-absolute, high-precision, pressure-density equation-of-state data for gold and platinum. We derived two experimentally constrained pressure standards to terapascal conditions. Establishing accurate experimental determinations of extreme pressure will facilitate better connections between experiments and theory, paving the way toward improving our understanding of material response to these extreme conditions.
RESUMEN
Carbon is the fourth-most prevalent element in the Universe and essential for all known life. In the elemental form it is found in multiple allotropes, including graphite, diamond and fullerenes, and it has long been predicted that even more structures can exist at pressures greater than those at Earth's core1-3. Several phases have been predicted to exist in the multi-terapascal regime, which is important for accurate modelling of the interiors of carbon-rich exoplanets4,5. By compressing solid carbon to 2 terapascals (20 million atmospheres; more than five times the pressure at Earth's core) using ramp-shaped laser pulses and simultaneously measuring nanosecond-duration time-resolved X-ray diffraction, we found that solid carbon retains the diamond structure far beyond its regime of predicted stability. The results confirm predictions that the strength of the tetrahedral molecular orbital bonds in diamond persists under enormous pressure, resulting in large energy barriers that hinder conversion to more-stable high-pressure allotropes1,2, just as graphite formation from metastable diamond is kinetically hindered at atmospheric pressure. This work nearly doubles the highest pressure at which X-ray diffraction has been recorded on any material.
RESUMEN
We report details of an experimental platform implemented at the National Ignition Facility to obtain in situ powder diffraction data from solids dynamically compressed to extreme pressures. Thin samples are sandwiched between tamper layers and ramp compressed using a gradual increase in the drive-laser irradiance. Pressure history in the sample is determined using high-precision velocimetry measurements. Up to two independently timed pulses of x rays are produced at or near the time of peak pressure by laser illumination of thin metal foils. The quasi-monochromatic x-ray pulses have a mean wavelength selectable between 0.6 Å and 1.9 Å depending on the foil material. The diffracted signal is recorded on image plates with a typical 2θ x-ray scattering angle uncertainty of about 0.2° and resolution of about 1°. Analytic expressions are reported for systematic corrections to 2θ due to finite pinhole size and sample offset. A new variant of a nonlinear background subtraction algorithm is described, which has been used to observe diffraction lines at signal-to-background ratios as low as a few percent. Variations in system response over the detector area are compensated in order to obtain accurate line intensities; this system response calculation includes a new analytic approximation for image-plate sensitivity as a function of photon energy and incident angle. This experimental platform has been used up to 2 TPa (20 Mbar) to determine the crystal structure, measure the density, and evaluate the strain-induced texturing of a variety of compressed samples spanning periods 2-7 on the periodic table.
RESUMEN
Ramp compression along a low-temperature adiabat offers a unique avenue to explore the physical properties of materials at the highest densities of their solid form, a region inaccessible by single shock compression. Using the National Ignition Facility and OMEGA laser facilities, copper samples were ramp compressed to peak pressures of 2.30 TPa and densities of nearly 30 g/cc, providing fundamental information regarding the compressibility and phase of copper at pressures more than 5 times greater than previously explored. Through x-ray diffraction measurements, we find that the ambient face-centered-cubic structure is preserved up to 1.15 TPa. The ramp compression equation-of-state measurements shows that there are no discontinuities in sound velocities up to 2.30 TPa, suggesting this phase is likely stable up to the peak pressures measured, as predicted by first-principal calculations. The high precision of these quasiabsolute measurements enables us to provide essential benchmarks for advanced computational studies on the behavior of dense monoatomic materials under extreme conditions that constitute a stringent test for solid-state quantum theory. We find that both density-functional theory and the stabilized jellium model, which assumes that the ionic structure can be replaced by an ionic charge distribution by constant positive-charge background, reproduces our data well. Further, our data could serve to establish new international secondary scales of pressure in the terapascal range that is becoming experimentally accessible with advanced static and dynamic compression techniques.
RESUMEN
We report direct in situ measurements of the crystal structure of tin between 0.12 and 1.2 TPa, the highest stress at which a crystal structure has ever been observed. Using angle-dispersive powder x-ray diffraction, we find that dynamically compressed Sn transforms to the body-centered-cubic (bcc) structure previously identified by ambient-temperature quasistatic-compression studies and by zero-kelvin density-functional theory predictions between 0.06 and 0.16 TPa. However, we observe no evidence for the hexagonal close-packed (hcp) phase found by those studies to be stable above 0.16 TPa. Instead, our results are consistent with bcc up to 1.2 TPa. We conjecture that at high temperature bcc is stabilized relative to hcp due to differences in vibrational free energy.
RESUMEN
Deep inside planets, extreme density, pressure, and temperature strongly modify the properties of the constituent materials. In particular, how much heat solids can sustain before melting under pressure is key to determining a planet's internal structure and evolution. We report laser-driven shock experiments on fused silica, α-quartz, and stishovite yielding equation-of-state and electronic conductivity data at unprecedented conditions and showing that the melting temperature of SiO2 rises to 8300 K at a pressure of 500 gigapascals, comparable to the core-mantle boundary conditions for a 5-Earth mass super-Earth. We show that mantle silicates and core metal have comparable melting temperatures above 500 to 700 gigapascals, which could favor long-lived magma oceans for large terrestrial planets with implications for planetary magnetic-field generation in silicate magma layers deep inside such planets.
RESUMEN
The recent discovery of more than a thousand planets outside our Solar System, together with the significant push to achieve inertially confined fusion in the laboratory, has prompted a renewed interest in how dense matter behaves at millions to billions of atmospheres of pressure. The theoretical description of such electron-degenerate matter has matured since the early quantum statistical model of Thomas and Fermi, and now suggests that new complexities can emerge at pressures where core electrons (not only valence electrons) influence the structure and bonding of matter. Recent developments in shock-free dynamic (ramp) compression now allow laboratory access to this dense matter regime. Here we describe ramp-compression measurements for diamond, achieving 3.7-fold compression at a peak pressure of 5 terapascals (equivalent to 50 million atmospheres). These equation-of-state data can now be compared to first-principles density functional calculations and theories long used to describe matter present in the interiors of giant planets, in stars, and in inertial-confinement fusion experiments. Our data also provide new constraints on mass-radius relationships for carbon-rich planets.
RESUMEN
Dynamic compression by multiple shocks is used to compress iron up to 560 GPa (5.6 Mbar), the highest solid-state pressure yet attained for iron in the laboratory. Extended x-ray absorption fine structure (EXAFS) spectroscopy offers simultaneous density, temperature, and local-structure measurements for the compressed iron. The data show that the close-packed structure of iron is stable up to 560 GPa, the temperature at peak compression is significantly higher than expected from pure compressive work, and the dynamic strength of iron is many times greater than the static strength based on lower pressure data. The results provide the first constraint on the melting line of iron above 400 GPa.
RESUMEN
We report on a new technique to accelerate flyer-plates to high velocities (â¼5 km/s). In this work, a strong shock is created through direct laser ablation of a thin polyimide foil. Subsequent shock breakout of that foil results in the generation of a plasma characterized by a smoothly increasing density gradient and a strong forward momentum. Stagnation of this plasma onto an aluminum foil and the resultant momentum transfer accelerates a thin aluminum flyer-plate. The aluminum flyer-plate is then accelerated to a peak velocity of â¼5 km/s before impact with a transparent lithium fluoride (LiF) window. Simulations of the stagnating plasma ramp compression and wave reverberations within the flyer-plate suggest that the temperature at the flyer-plate impact surface is elevated by less than 50 °C. Optical velocimetry is used to measure the flyer-plate velocity and impact conditions enabling the shocked refractive index of LiF to be determined. The results presented here are in agreement with conventional flyer-plate measurements validating the use of plasma-accelerated flyer-plates for equation of state and impact studies.
RESUMEN
The velocity and remaining ablator mass of an imploding capsule are critical metrics for assessing the progress toward ignition of an inertially confined fusion experiment. These and other ablator rocket parameters have been measured using a single streaked x-ray radiograph. A regularization technique has been used to determine the ablator density profile ρ(r) at each time step; moments of ρ(r) then provide the areal density, average radius, and mass of the unablated, or remaining, ablator material, with the velocity determined from the time derivative of the average radius. The technique has been implemented on experiments at the OMEGA laser facility.
RESUMEN
Velocity interferometers are typically used to measure velocities of surfaces at a single point or along an imaged line as a function of time. We describe an optical arrangement that enables high-resolution measurements of the two-dimensional velocity field across a shock front or shocked interface. The technique is employed to measure microscopic fluctuations in shock fronts that have passed through materials being considered as ablators for indirect-drive inertial confinement fusion. With picosecond time resolution the instrument captures velocity modes with wavelengths as short as 2.5 microm at a resolution of approximately 10 m/s rms on velocity fields averaging many km/s over an 800 microm field of view.
RESUMEN
A new compression technique, which enables the study of solids into the TPa regime, is described and used to ramp (or quasi-isentropically) compress diamond to a peak pressure of 1400 GPa. Diamond stress versus density data are reported to 800 GPa and suggest that the diamond phase is stable and has significant material strength up to at least this stress level. Data presented here are the highest ramp compression pressures by more than a factor of 5 and the highest-pressure solid equation-of-state data ever reported.
RESUMEN
The intraperitoneal injection of Balb/c mice with synthetic analogues of adjuvants S-[2,3-bis(palmitoyloxy)-(2-RS)-propyl]-N-palmitoyl-R-cysteine (Pam3Cys) or muramyltripeptide phosphatidylethanolamine (MTP-PE) inhibited the tumourigenic growth of subcutaneously injected VLM cells, a syngeneic simian virus 40 (SV40)-transformed cell line. Furthermore, the Pam3Cys conjugate of K698-T708 (KT), which represents the C-terminal undecapeptide of the SV40 large tumour (T) antigen, was tumour-protective. Also syngeneic spleen cells, preincubated in vitro with this Pam3Cys-KT derivative, which anchores spontaneously at the cell membrane, were, through SV40 tumour mimicry, tumour-protective. The protection was impaired by treatment of the mice with either anti-CD4, anti-CD8 IgG, anti asialo GM1 antiserum or dextrane sulfate, which deplete the CD4+, CD8+ and NK cells or the macrophages, respectively. In summary, SV40 tumour transplantation resistance can be experimentally elicited by a tumour-epitope-specific vaccine. In the absence of an immunogenic epitope protection was obtained by administration of biological response modifiers. Protection is effected by SV40-T-antigen-specific cytotoxic lymphocytes in cooperation with NK cells and macrophages.
Asunto(s)
Acetilmuramil-Alanil-Isoglutamina/análogos & derivados , Adyuvantes Inmunológicos/administración & dosificación , Antígenos Virales de Tumores/administración & dosificación , Cisteína/análogos & derivados , Factores Inmunológicos/administración & dosificación , Lipoproteínas/administración & dosificación , Oligopéptidos/administración & dosificación , Infecciones por Papillomavirus/prevención & control , Fosfatidiletanolaminas/administración & dosificación , Virus 40 de los Simios/inmunología , Infecciones Tumorales por Virus/prevención & control , Acetilmuramil-Alanil-Isoglutamina/administración & dosificación , Acetilmuramil-Alanil-Isoglutamina/inmunología , Animales , Antígenos Virales de Tumores/inmunología , Cisteína/administración & dosificación , Cisteína/inmunología , Femenino , Inmunización , Lipoproteínas/inmunología , Ratones , Ratones Endogámicos BALB C , Oligopéptidos/inmunología , Fosfatidiletanolaminas/inmunologíaRESUMEN
Suppression of Epstein-Barr virus (EBV) lymphoproliferation by three commercial human immunoglobulin (hu-Ig) preparations, one enriched with immunoglobulin A (hu-IgA-IgG) and the other two containing more than 97% immunoglobulin G (hu-IgG) with anti-EBV antibodies was studied. All three human preparations suppress EBV-induced lymphoproliferation in vitro and reduce release of interleukin (IL)-6 and IL-10 dose-dependently, irrespective, however, of the titer of EBV-specific antibodies present. This result was unexpected. Human Ig also reduces human recombinant IL-6-induced lymphoproliferation in EBV-free cultures and augments low-dose human recombinant IL-10-provoked suppression. In vivo studies used mice with severe combined immunodeficiency (SCID), reconstituted with human tonsillar mononuclear cells, and then infected with EBV from B95-8-derived supernatants. Immediate injection of hu-Ig after EBV infection, if given only once, delayed, and if given every two or four weeks, abolished the induction of EBV-associated lymphomas. Delay of hu-Ig injection by 48 hours after infection was less effective. Hu-IgG was consistently more efficacious than hu-IgA-IgG. Under these conditions the best survival rates were obtained with sustained hu-IgG administrations every two weeks. Serum hu-IL-6 and hu-IL-10 were detectable only in lymphoma-bearing SCID mice. Hu-Ig treatment reduced the detectability of both cytokines. These results suggest that hu-Ig-with antibodies to EBV-may exert a beneficial treatment potential for EBV-induced lymphoproliferation in immunocompromised patients. The dependence of this suppressive effect of hu-Ig on specific anti-EBV antibodies in vivo remains to be resolved.
Asunto(s)
Hematopoyesis , Infecciones por Herpesviridae/inmunología , Trastornos Linfoproliferativos/microbiología , Infecciones Tumorales por Virus/inmunología , Animales , Anticuerpos Antivirales/uso terapéutico , Infecciones por Herpesviridae/patología , Herpesvirus Humano 4 , Humanos , Huésped Inmunocomprometido , Inmunoglobulina G/uso terapéutico , Inmunoterapia , Interleucina-10/biosíntesis , Interleucina-6/biosíntesis , Ratones , Ratones SCID , Infecciones Tumorales por Virus/patologíaRESUMEN
The aim of this study was to quantitate the number of cell membrane-located SV40 large tumor antigen (large T) molecules of SV40-transformed cell lines by cytofluorimetric analysis. Five different SV40-transformed cell lines were labelled by either a biotin- or a fluorescein-conjugated monoclonal antibody, PAb1605, which is specific for the large T carboxyterminus. The conjugated-antibody fluorescence signals of the stained large T molecules of transformed cells were measured via cytofluorimetry. Comparison of the fluorescence signals of calibrated beads bearing a known number of fluorescein molecules to the signals of conjugated PAb1605 antibodies bound on microbeads to a defined number of IgG binding sites made it possible to determine the number of antibody-accessible large T molecules per SV40-transformed cell. The numbers (x10(-4)) found per cell were 1.0 (ELONA, hamster), 3.0 (VLM, mouse), 3.5 (mKSA, mouse), 11 (C57SV, mouse), and 5.5 (SV80, human), respectively. Thus, the technique described allows a precise quantitation of surface-exposed, antibody-accessible viral antigen expression.
Asunto(s)
Antígenos Transformadores de Poliomavirus/análisis , Membrana Celular/inmunología , Citometría de Flujo/métodos , Animales , Antígenos Transformadores de Poliomavirus/inmunología , Línea Celular Transformada , Núcleo Celular/inmunología , Cricetinae , Técnica del Anticuerpo Fluorescente , Humanos , RatonesRESUMEN
The murine monoclonal antibody PAb1605 defines an epitope, peptide Lys(698)-Thr(708) (KT), on the carboxyterminus of the tumour(T)antigen of SV40-transformed cells. In vivo and in vitro experiments had shown that this sequence represents an epitope for both humoral and cellular immune responses. When injected into rabbits PAb1605 induces anti-idiotypic antibodies (Ab-2). Ab-2 beta (internal image type) was purified by adsorption chromatography and characterized by the ability of KT to compete with the binding of ab-2 with ab-1. Murine anti-anti-idiotypic antibodies (ab-3) were obtained by immunization of mice with ab-2 beta. Both ab-1 and ab-3 JgG showed affinities to immunoprecipitated SV40 T antigen by immunoblot analysis and to nuclear SV40 T antigen by the immunofluorescence assay. The binding of ab-3 to SV40 T antigen was completely inhibited by competition with KT. We conclude that the polyclonal ab-3 is of the ab-3 subtype and specific for only one epitope which is represented by KT and defined by ab-1. The results demonstrate that the specificity for a defined peptide epitope of an antibody was conserved even after two consecutive steps of anti-idiotypic-antibody formation in two host species. Since this postulate of network theory could be verified for a sequence of a tumour-associated antigen which represents a B- and T cell epitope, this model is of great interest for further tumour immunological studies.
Asunto(s)
Anticuerpos Antiidiotipos/inmunología , Anticuerpos Antivirales/inmunología , Antígenos Transformadores de Poliomavirus/inmunología , Virus 40 de los Simios/inmunología , Secuencia de Aminoácidos , Animales , Anticuerpos Antiidiotipos/biosíntesis , Anticuerpos Antivirales/biosíntesis , Especificidad de Anticuerpos , Ensayo de Inmunoadsorción Enzimática , Epítopos/inmunología , Femenino , Técnica del Anticuerpo Fluorescente , Immunoblotting , Masculino , Ratones , Ratones Endogámicos BALB C , Datos de Secuencia Molecular , ConejosRESUMEN
A phase I/IIA clinical trial with the chimeric mouse-human monoclonal antibody CGP 47,439 to the principal neutralization determinant in the V3 region of human immunodeficiency virus type 1 (HIV-1) strain IIIB envelope protein gp120 is reported. The trial was an uncontrolled single-center, open-label, multidose tolerability, immunogenicity, and pharmacokinetic study in homosexual men with advanced HIV disease. Patient groups were formed on the basis of the reactivity of the antibody with the gp120 of their HIV-1 isolates. Intravenous infusions of 1, 10, and 25 mg of antibody were followed by seven escalated doses of 50, 100, and 200 mg, every 3 weeks. The antibody was well tolerated; no toxicity was observed. Some patients showed a transient but insignificant antibody response to the antibody with no apparent adverse reactions or accelerated elimination of it. Substantial serum levels of the antibody were maintained with a mean t1/2 beta of 8-16 days. A virus burden reduction was observed in some patients.