RESUMEN
Multilayer piezoelectric transducers and resonators are widely used for generating propagating and standing acoustic waves as well as for sensor devices. More recently, layered piezoelectric structures based on thin film technology became increasingly important for electromechanical filters used in mobile phones. As a consequence, analytical mathematical modeling of such structures is of high interest. In this paper, a general rigorous transfer matrix description for one-dimensional (1D) layered structures consisting of piezoelectric, visco-elastic, and dielectric layers of arbitrary number is introduced to characterize the electrical and mechanical behavior of a general piezoelectric transducer or resonator with two electrodes and arbitrary acoustic termination impedances (Rig-1D-model). This model is the most general 1D analytical description of layered piezoelectric structures available and can be used for the characterization of various composite transducer and resonant sensor applications. Considered in detail are layered structures with the technically important cases of only one electromechanically coupled mode, and the structure at one or both outer surfaces is in contact with semi-infinite media. For such devices, it is shown how the frequency dependence of the total electrical admittance and spatial dependence of the displacements can be calculated.
RESUMEN
Microelectromechanical system (MEMS) devices, such as accelerometers, are widely used across industries, including the automotive, consumer electronics, and medical industries. MEMS are efficiently produced at very high volumes using large-scale semiconductor manufacturing techniques. However, these techniques are not viable for the cost-efficient manufacturing of specialized MEMS devices at low- and medium-scale volumes. Thus, applications that require custom-designed MEMS devices for markets with low- and medium-scale volumes of below 5000-10,000 components per year are extremely difficult to address efficiently. The 3D printing of MEMS devices could enable the efficient realization and production of MEMS devices at these low- and medium-scale volumes. However, current micro-3D printing technologies have limited capabilities for printing functional MEMS. Herein, we demonstrate a functional 3D-printed MEMS accelerometer using 3D printing by two-photon polymerization in combination with the deposition of a strain gauge transducer by metal evaporation. We characterized the responsivity, resonance frequency, and stability over time of the MEMS accelerometer. Our results demonstrate that the 3D printing of functional MEMS is a viable approach that could enable the efficient realization of a variety of custom-designed MEMS devices, addressing new application areas that are difficult or impossible to address using conventional MEMS manufacturing.
RESUMEN
Addition of pharmaceutical excipients is a commonly used approach to decrease the viscosity of highly concentrated protein formulations, which otherwise could not be subcutaneously injected or processed. The variety of protein-protein interactions, which are responsible for increased viscosities, makes a portfolio approach necessary. Screening of several excipients to develop such a portfolio is time and money consuming in industrial settings. Responsible protein-protein interactions were investigated using the interaction parameter kD obtained from dynamic light scattering measurements in the studies presented herein. Together with in-silico calculated excipient parameter, kD could be used as a screening tool accelerating screening and formulation development as kD is suitable to high-throughput formats using small quantities of protein and low concentrations. A qualitative correlation between kD and high-concentration viscosity behavior could be shown in our case.
Asunto(s)
Excipientes , Inmunoglobulina G , Anticuerpos Monoclonales , Desarrollo Industrial , ViscosidadRESUMEN
The method of matched asymptotic expansions is applied to the investigation of transitional separation bubbles. The problem-specific Reynolds number is assumed to be large and acts as the primary perturbation parameter. Four subsequent stages can be identified as playing key roles in the characterization of the incipient laminar-turbulent transition process: due to the action of an adverse pressure gradient, a classical laminar boundary layer is forced to separate marginally (I). Taking into account viscous-inviscid interaction then enables the description of localized, predominantly steady, reverse flow regions (II). However, certain conditions (e.g. imposed perturbations) may lead to a finite-time breakdown of the underlying reduced set of equations. The ensuing consideration of even shorter spatio-temporal scales results in the flow being governed by another triple-deck interaction. This model is capable of both resolving the finite-time singularity and reproducing the spike formation (III) that, as known from experimental observations and direct numerical simulations, sets in prior to vortex shedding at the rear of the bubble. Usually, the triple-deck stage again terminates in the form of a finite-time blow-up. The study of this event gives rise to a noninteracting Euler-Prandtl stage (IV) associated with unsteady separation, where the vortex wind-up and shedding process takes place. The focus of the present paper lies on the triple-deck stage III and is twofold: firstly, a comprehensive numerical investigation based on a Chebyshev collocation method is presented. Secondly, a composite asymptotic model for the regularization of the ill-posed Cauchy problem is developed. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s10665-021-10125-3.
RESUMEN
The mode of action of membrane-active molecules, such as antimicrobial, anticancer, cell penetrating, and fusion peptides and their synthetic mimics, transfection agents, drug permeation enhancers, and biological signaling molecules (e.g., quorum sensing), involves either the general or local destabilization of the target membrane or the formation of defined, rather stable pores. Some effects aim at killing the cell, while others need to be limited in space and time to avoid serious damage. Biological tests reveal translocation of compounds and cell death but do not provide a detailed, mechanistic, and quantitative understanding of the modes of action and their molecular basis. Model membrane studies of membrane leakage have been used for decades to tackle this issue, but their interpretation in terms of biology has remained challenging and often quite limited. Here we compare two recent, powerful protocols to study model membrane leakage: the microscopic detection of dye influx into giant liposomes and time-correlated single photon counting experiments to characterize dye efflux from large unilamellar vesicles. A statistical treatment of both data sets does not only harmonize apparent discrepancies but also makes us aware of principal issues that have been confusing the interpretation of model membrane leakage data so far. Moreover, our study reveals a fundamental difference between nano- and microscale systems that needs to be taken into account when conclusions about microscale objects, such as cells, are drawn from nanoscale models.
Asunto(s)
Fluoresceínas/metabolismo , Colorantes Fluorescentes/metabolismo , Liposomas/metabolismo , Permeabilidad de la Membrana Celular , Microscopía Fluorescente , Tamaño de la Partícula , Permeabilidad , Espectrometría de FluorescenciaRESUMEN
We investigate the influence of the Mo-layer thickness on the EUV reflectance of Mo/Si mirrors with a set of unpolished and interface-polished Mo/Si/C multilayer mirrors. The Mo-layer thickness is varied in the range from 1.7 nm to 3.05 nm. We use a novel combination of specular and diffuse intensity measurements to determine the interface roughness throughout the multilayer stack and do not rely on scanning probe measurements at the surface only. The combination of EUV and X-ray reflectivity measurements and near-normal incidence EUV diffuse scattering allows to reconstruct the Mo layer thicknesses and to determine the interface roughness power spectral density. The data analysis is conducted by applying a matrix method for the specular reflection and the distorted-wave Born approximation for diffuse scattering. We introduce the Markov-chain Monte Carlo method into the field in order to determine the respective confidence intervals for all reconstructed parameters. We unambiguously detect a threshold thickness for Mo in both sample sets where the specular reflectance goes through a local minimum correlated with a distinct increase in diffuse scatter. We attribute that to the known appearance of an amorphous-to-crystallization transition at a certain thickness threshold which is altered in our sample system by the polishing.
RESUMEN
The study of active microbial populations in deep, energy-limited marine sediments has extended our knowledge of the limits of life on Earth. Typically, microbial activity in the deep biosphere is calculated by transport-reaction modelling of pore water solutes or from experimental measurements involving radiotracers. Here we modelled microbial activity from the degree of D:L-aspartic acid racemization in microbial necromass (remains of dead microbial biomass) in sediments up to ten million years old. This recently developed approach (D:L-amino acid modelling) does not require incubation experiments and is highly sensitive in stable, low-activity environments. We applied for the first time newly established constraints on several important input parameters of the D:L-amino acid model, such as a higher aspartic acid racemization rate constant and a lower cell-specific carbon content of sub-seafloor microorganisms. Our model results show that the pool of necromass amino acids is turned over by microbial activity every few thousand years, while the turnover times of vegetative cells are in the order of years to decades. Notably, microbial turnover times in million-year-old sediment from the Peru Margin are up to 100-fold shorter than previous estimates, highlighting the influence of microbial activities on element cycling over geologic time scales.
Asunto(s)
Aminoácidos/metabolismo , Bacterias/metabolismo , Sedimentos Geológicos/microbiología , Aminoácidos/química , Ácido Aspártico/química , Ácido Aspártico/metabolismo , Biomasa , Sedimentos Geológicos/química , ARN Ribosómico 16S/análisisRESUMEN
Point focusing measurements using pairs of directly bonded crossed multilayer Laue lenses (MLLs) are reported. Several flat and wedged MLLs have been fabricated out of a single deposition and assembled to realise point focusing devices. The wedged lenses have been manufactured by adding a stress layer onto flat lenses. Subsequent bending of the structure changes the relative orientation of the layer interfaces towards the stress-wedged geometry. The characterization at ESRF beamline ID13 at a photon energy of 10.5â keV demonstrated a nearly diffraction-limited focusing to a clean spot of 43â nm × 44â nm without significant side lobes with two wedged crossed MLLs using an illuminated aperture of approximately 17â µm × 17â µm to eliminate aberrations originating from layer placement errors in the full 52.7â µm × 52.7â µm aperture. These MLLs have an average individual diffraction efficiency of 44.5%. Scanning transmission X-ray microscopy measurements with convenient working distances were performed to demonstrate that the lenses are suitable for user experiments. Also discussed are the diffraction and focusing properties of crossed flat lenses made from the same deposition, which have been used as a reference. Here a focal spot size of 28â nm × 33â nm was achieved and significant side lobes were noticed at an illuminated aperture of approximately 23â µm × 23â µm.
RESUMEN
The discovery of a microbial ecosystem in ocean sediments has evoked interest in life under extreme energy limitation and its role in global element cycling. However, fundamental parameters such as the size and the amount of biomass of sub-seafloor microbial cells are poorly constrained. Here we determined the volume and the carbon content of microbial cells from a marine sediment drill core retrieved by the Integrated Ocean Drilling Program (IODP), Expedition 347, at Landsort Deep, Baltic Sea. To determine their shape and volume, cells were separated from the sediment matrix by multi-layer density centrifugation and visualized via epifluorescence microscopy (FM) and scanning electron microscopy (SEM). Total cell-carbon was calculated from amino acid-carbon, which was analyzed by high-performance liquid chromatography (HPLC) after cells had been purified by fluorescence-activated cell sorting (FACS). The majority of microbial cells in the sediment have coccoid or slightly elongated morphology. From the sediment surface to the deepest investigated sample (~60 m below the seafloor), the cell volume of both coccoid and elongated cells decreased by an order of magnitude from ~0.05 to 0.005 µm(3). The cell-specific carbon content was 19-31 fg C cell(-1), which is at the lower end of previous estimates that were used for global estimates of microbial biomass. The cell-specific carbon density increased with sediment depth from about 200 to 1000 fg C µm(-3), suggesting that cells decrease their water content and grow small cell sizes as adaptation to the long-term subsistence at very low energy availability in the deep biosphere. We present for the first time depth-related data on the cell volume and carbon content of sedimentary microbial cells buried down to 60 m below the seafloor. Our data enable estimates of volume- and biomass-specific cellular rates of energy metabolism in the deep biosphere and will improve global estimates of microbial biomass.
RESUMEN
We demonstrate full-field X-ray microscopy using crossed multilayer Laue lenses (MLL). Two partial MLLs are prepared out of a 48 µm high multilayer stack consisting of 2451 alternating zones of WSi2 and Si. They are assembled perpendicularly in series to obtain two-dimensional imaging. Experiments are done in a laboratory X-ray microscope using Cu-Kα radiation (E = 8.05 keV, focal length f = 8.0 mm). Sub-100 nm resolution is demonstrated without mixed-order imaging at an appropriate position of the image plane. Although existing deviations from design parameters still cause aberrations, MLLs are a promising approach to realize hard X-ray microscopy at high efficiencies with resolutions down to the sub-10 nm range in future.
RESUMEN
Two different multilayer Laue lens designs were made with total deposition thicknesses of 48â µm and 53â µm, and focal lengths of 20.0â mm and 12.5â mm at 20.0â keV, respectively. From these two multilayer systems, several lenses were manufactured for one- and two-dimensional focusing. The latter is realised with a directly bonded assembly of two crossed lenses, that reduces the distance between the lenses in the beam direction to 30â µm and eliminates the necessity of producing different multilayer systems. Characterization of lens fabrication was performed using a laboratory X-ray microscope. Focusing properties have been investigated using ptychography.
RESUMEN
Recruiting polymorphonuclear neutrophil granulocytes (PMNs) from circulation and bone marrow to the site of inflammation is one of the pivotal mechanisms of the innate immune system. During inflammation, the enzyme heme oxygenase 1 (HO-1) has been shown to reduce PMN migration. Although these effects have been described in various models, underlying mechanisms remain elusive. Recent studies revealed an influence of HO-1 on different cells of the bone marrow. We investigated the particular role of the bone marrow in terms of HO-1-dependent pulmonary inflammation. In a murine model of LPS inhalation, stimulation of HO-1 by cobalt (III) protoporphyrin-IX-chloride (CoPP) resulted in reduced segmented PMN migration into the alveolar space. In the CoPP group, segmented PMNs were also decreased intravascularly, and concordantly, mature and immature PMN populations were higher in the bone marrow. Inhibition of the enzyme by tin protoporphyrin-IX increased segmented and banded PMN migration into the bronchoalveolar lavage fluid with enhanced PMN release from the bone marrow and aggravated parameters of tissue inflammation. Oxidative burst activity was significantly higher in immature compared with mature PMNs. The chemokine stromal-derived factor-1 (SDF-1), which mediates homing of leukocytes into the bone marrow and is decreased in inflammation, was increased by CoPP. When SDF-1 was blocked by the specific antagonist AMD3100, HO-1 activation was no longer effective in curbing PMN trafficking to the inflamed lungs. In conclusion, we show evidence that the anti-inflammatory effects of HO-1 are largely mediated by inhibiting the release of segmented PMNs from the bone marrow rather than direct effects within the lung.
Asunto(s)
Hemo-Oxigenasa 1/metabolismo , Proteínas de la Membrana/metabolismo , Neutrófilos/inmunología , Neumonía/enzimología , Enfermedad Aguda , Administración por Inhalación , Animales , Bencilaminas , Células de la Médula Ósea/efectos de los fármacos , Células de la Médula Ósea/inmunología , Células de la Médula Ósea/patología , Líquido del Lavado Bronquioalveolar/química , Líquido del Lavado Bronquioalveolar/inmunología , Quimiocina CXCL12/antagonistas & inhibidores , Quimiocina CXCL12/genética , Quimiocina CXCL12/metabolismo , Ciclamas , Regulación de la Expresión Génica , Hemo-Oxigenasa 1/genética , Compuestos Heterocíclicos/farmacología , Inmunidad Innata/efectos de los fármacos , Lipopolisacáridos , Masculino , Proteínas de la Membrana/genética , Metaloporfirinas/farmacología , Ratones , Ratones Endogámicos C57BL , Infiltración Neutrófila/efectos de los fármacos , Neutrófilos/efectos de los fármacos , Neutrófilos/patología , Neumonía/inducido químicamente , Neumonía/inmunología , Neumonía/patología , Protoporfirinas/farmacología , Estallido Respiratorio/efectos de los fármacosRESUMEN
Interactive solutions for steady two-dimensional laminar marginally separated boundary layers are known to exist up to a critical value Gamma(c) of the controlling parameter (e.g. the angle of attack of a slender airfoil) Gamma only. Here, we investigate three-dimensional unsteady perturbations of such boundary layers, assuming that the basic flow is almost critical, i.e. in the limit Gamma(c)-Gamma-->0. It is then shown that the interactive equations governing such perturbations simplify significantly, allowing, among others, a systematic study of the blow-up phenomenon observed in earlier investigations and the optimization of devices used in boundary-layer control.