Bidimensional Dynamic Magnetic Levitation: Sequential Separation of Microplastics by Density and Size.

There is a current gap in sample preparation techniques integrating the separation of microplastics according to their different material types and particle sizes. We describe herein the Bidimensional Dynamic Magnetic Levitation (2D-MagLev) technique, enabling the resolution of mixtures of microplastics sorting them by plastic type and particle size. Separations are carried out in a bespoke flow cell sandwiched between two ring magnets and connected to programmable pumps for flow control. The first separation dimension is based on sequential increases in the concentration of a paramagnetic salt (MnCl2), enabling magnetic levitation of microplastics with determined densities. The second dimension is based on increasing flow rate gradients and maintaining constant MnCl2 concentrations. This fractionates the magnetically levitating microplastics according to their different particle sizes. Microplastics are therefore collected by their increasing density, and the particles corresponding to each density are fractionated from smaller to larger size. Using polyethylene microspheres with defined density (1.03-1.13 g cm-3) and size (98-390 µm) as microplastic mimicking materials, we investigated their optimum threshold velocities for their size fractionation, potential effects of medium viscosity and sample loading, and types of flow rate gradients (linear, step). Performing a separation using a combination of step gradients in both MnCl2 concentration and flow rate, mixtures comprising microplastics of two different densities and three different particle sizes were separated. 2D-MagLev is simple, fast, versatile, and robust, opening new avenues to facilitate the study of the environmental presence and impact of microplastics.

Isotachophoretic quantification of total viable bacteria on meat and surfaces.

BACKGROUND: The quantification of microbes, particularly live bacteria, is of utmost importance in assessing the quality of meat products. In the context of meat processing facilities, prompt identification and removal of contaminated carcasses or surfaces is crucial to ensuring the continuous production of safe meat for human consumption. The plate count method and other traditional detection methods are not only labour-intensive but also time-consuming taking 24-48 h. RESULTS: In this report, we present a novel isotachophoretic quantification method utilizing two nucleic acid stains, SYTO9 and propionic iodide, for the detection of total viable bacteria. The study employed E. coli M23 bacteria as a model organism, with an analysis time of only 30 min. The method demonstrated a limit of detection (LOD) of 184 CFU mL-1 and 14 cells mL-1 for total viable count and total cell count, respectively. Furthermore, this new approach is capable of detecting the microbial quality standard limits for food contacting surfaces (10 CFU cm-2) and meat (1.99 × 104 CFU cm-2) by swabbing an area of 10 × 10 cm2. SIGNIFICANCE: In contrast to the culture-based methods usually employed in food processing facilities, this isotachophoretic technique enables easy and rapid detection (<30 min) of microorganisms, facilitating crucial decision-making essential for maintaining product quality and safety.

Isolation and Identification of the High-Affinity DNA Aptamer Target to the Brain-Derived Neurotrophic Factor (BDNF).

Aptamers are functional oligonucleotide ligands used for the molecular recognition of various targets. The natural characteristics of aptamers make them an excellent alternative to antibodies in diagnostics, therapeutics, and biosensing. DNA aptamers are mainly single-stranded oligonucleotides (ssDNA) that possess a definite binding to targets. However, the application of aptamers to the fields of brain health and neurodegenerative diseases has been limited to date. Herein, a DNA aptamer against the brain-derived neurotrophic factor (BDNF) protein was obtained by in vitro selection. BDNF is a potential biomarker of brain health and neurodegenerative diseases and has functions in the synaptic plasticity and survival of neurons. We identified eight aptamers that have binding affinity for BDNF from a 50-nucleotide library. Among these aptamers, NV_B12 showed the highest sensitivity and selectivity for detecting BDNF. In an aptamer-linked immobilized sorbent assay (ALISA), the NV_B12 aptamer strongly bound to BDNF protein, in a dose-dependent manner. The dissociation constant (Kd) for NV_B12 was 0.5 nM (95% CI: 0.4-0.6 nM). These findings suggest that BDNF-specific aptamers could be used as an alternative to antibodies in diagnostic and detection assays for BDNF.

Chemical vapour deposition in narrow capillaries: Electro-osmotic flow control in capillary electrophoresis.

BACKGROUND: In capillary electrophoresis (CE), the inner surface of fused-silica capillaries is commonly covalently modified with liquid silanes to control electroosmotic flow (EOF). This liquid phase deposition (LPD) approach is challenging for long and narrow-diameter capillaries (≥1 m, ≤25 µm ID) inhibiting commercial production. Here, we use chemical vapour deposition (CVD) to covalently modify capillaries with different silanes. Using a home-built CVD device, capillaries were modified with neutral (3-glycidyloxypropyl) trimethoxysilane (GPTMS), the weak base (3-aminopropyl) trimethoxysilane (APTMS), the weak acid 3-mercaptopropyltrimethoxysilane (MPTMS) and the neutral hydrophobic trichloro(1H,1H,2H,2H-perfluorooctyl) silane (PFOCTS). Gas-phase modification of GPTMS with acid and ammonia allowed further modification of the surface prior to molecular layer deposition (MLD) of poly(p-phenylene terephthalamide) (PPTA) using the self-limiting sequential reaction between terephthalaldehyde (TA) and p-phenylenediamine (PD) vapours. RESULTS: Capillaries coated with GPTMS by CVD showed a greater reduction in EOF at all pH values than the conventional LPD. APTMS showed a reduction of the EOF at pH 9, with EOF reversal observed below pH 6. MPTMS provided a slightly lower EOF than an unmodified capillary at high pH, and a slightly higher EOF at lower pH. PFOCTS provided the most consistent EOF as a function of pH. The deposition of successive layers of PPTA resulted in increased surface coverage of the polymer and a greater reduction in EOF at pH higher than 5. The stability of a 10 µm ID GPTMS coated capillary was tested at pH 8.8 in a 200 mM CHES/Tris BGE for the separation of inorganic anions. Over 1.5 months of continuous operation (≈4130 runs), the reproducibility of the apparent mobilities for chloride, nitrite, nitrate and sulfate were 2.43%, 2.56%, 2.63% and 3.05%, respectively. The intra-day and inter-day column-to-column reproducibility and batch-to-batch reproducibility for all the coated capillaries ranged between 0.34% and 3.95%. SIGNIFICANCE: The study demonstrates the superior performance of CVD coating for suppressing the EOF compared to LPD allowing the easy modification of long lengths of narrow capillary. The variation in silane, and the ability of MLD to modify and control the surface chemistry, provides a simple and facile method for surface modification. The stability of these coatings will allow long-term capillary electrophoresis monitoring of water chemistry, such as for monitoring fertiliser run-off in natural waters.

Electrokinetic Extraction of Doxorubicin from Biological Fluids by Polymer Inclusion Membrane Sampling Probe.

A polymer inclusion membrane (PIM) based sampling probe was developed for electrokinetic extraction of drugs from biological fluids. The probe was fabricated by dip-coating a nonconductive glass capillary tube in a homogeneous PIM solution for three cycles. The PIM solution comprised cellulose triacetate (CTA), 2-nitrophenyl octyl ether (NPOE), and 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide [EMIM][NTf2] in a ratio of 5:4:2. The developed probe electrokinetically extracted doxorubicin from human plasma, human serum, and dried blood spot (DBS). The practicability and reliability of the electrokinetic extraction were evaluated by LC-MS/MS to quantify the desorption of extracted doxorubicin. Under the optimized conditions, a quantification limit of 0.2-2 ng/mL was achieved for the three biological samples. The probe was further integrated into a portable battery-powered device for safe low-voltage (36 V) electrokinetic extraction. The developed technique is envisioned to provide a more efficient analytical workflow in the laboratory.

Portable capillary electrophoresis coupled with swab-based extraction device for cleaning validation in pharmaceutical facilities.

All pharmaceutical manufacturers are required to verify that their production equipment is free from contaminants. Here, we report the capability of a fully automated portable capillary electrophoresis instrument with an integrated sample swab extraction - the Grey Scan ETD-100 - for the detection of pharmaceutical residues on surfaces of manufacturing equipment. Lidocaine was used as a model compound and could be recovered from a surface by swabbing, extracted from the swab, and analysed within 1 min. The recovery of lidocaine from a stainless-steel coupon was 81.3 %, with a LOD of 0.13 µg/swab. This fast, sensitive, and simple method implemented on a user-friendly portable CE instrument without the need for manual sample pre-treatment provides the possibility for on-site rapid determination of equipment cleanliness in the pharmaceutical industry.

Magnetism-Assisted Density Gradient Separation of Microplastics.

A versatile method for the efficient separation of different types of microplastics from particle mixtures is presented. Magnetism-assisted density gradient separation (Mag-DG-Sep) relies on a bespoke separation cell connected to a gradient pump and located between two like-pole-facing neodymium magnets. In Mag-DG-Sep, particle mixtures initially sunk in water are subjected to a gradient of increasing concentration of MnCl2, enabling the sequential suspension and collection of particles with different densities. The suspension process is assisted by the paramagnetism of the MnCl2 solution placed between the two magnets, which contributes to focusing the ascending particles from the bottom of the separation cell to the outlet, thus enhancing the resolution of the separation process. To demonstrate the concept, a mixture of polyethylene (PE) polymer particles with a similar size range (180-212 µm) but different densities (ca. 0.98, 1.025, 1.08, and 1.35 g cm-3) was selectively separated in a single Mag-DG-Sep run. These particles were also efficiently separated when mixed with other types of particles, such as glass or soil. A generic linear MnCl2 gradient can be directly applied for sample screening covering a broad range of densities (0.98-2.20 g cm-3), while steps can be introduced in the gradient, increasing the separation resolution of particles with close densities (1.025-1.08 g cm-3). As a proof-of-concept application, Mag-DG-Sep facilitated sample preparation of microplastics present in a soil sample prior to their examination by attenuated total reflection Fourier-transform infrared spectroscopy.

Development of dispersive inclusion complex microextraction for the analysis of nitrosamines in medicinal products.

A new dispersive inclusion complex microextraction (DICM) approach coupled with ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS) for the determination of n-nitrosamine impurities in different medicinal products is demonstrated for the first time. The proposed DICM procedures consist of a dispersive liquid phase microextraction steps employing cyclodextrin as an inclusion complex agent to extract n-nitrosamines namely N-nitrosodimethylamine (NDMA), N-nitrosodiethylamine (NDEA), N-nitrosodiisopropylamine (NDIPA), N-ethyl-N-nitrosoisopropylamine (NEIPA) and N-nitroso-di-n-butylamine (NDBA) present in the medicinal products. The sample solutions were prepared by mixing 5% (m/v) NaCl solution with 1.5 mM ß-cyclodextrin and 20 mM sodium dodecyl sulphate to form a stable inclusion complex and subsequently extracted into dichloromethane as an extraction solvent. The enriched solution was reconstituted into aqueous solution prior to UPLC-MS/MS analysis. The method showed good linearity in the range of 0.036-1 ng/mL with a correlation coefficient of at least 0.995, acceptable reproducibility (RSD 0.5-5.8%, n=5), low limits of detection (0.011-0.018 ng/mL), and satisfactory relative recoveries (96-105%). The results obtained were found to be at least 10-fold more sensitive comparable to those obtained using validated direct sample dissolutions coupled with UPLC-MS/MS approach.

Miniaturized 3D printed solid-phase extraction cartridges with integrated porous frits.

Here we have studied the effect of the thickness and printing orientation using PolyJet 3D printing to fabricate single-material cartridges with built-in porous frits enabling solid-phase extraction (SPE) by packing commercial sorbents. This is achieved by tuning the degree of interpenetration of the building material and the water-soluble support material used in PolyJet 3D printing by modifying the orientation of the print head respective to the frit. SPE cartridges printed at an orientation of 30° with a 150 µm thick integrated frit were selected for the SPE experiments in a compromise between frit permeability to flow and stability to retain commercial sorbents for SPE. The performance of the 3D printed cartridges was evaluated for the SPE of the endocrine-disrupting phenols 4-tert-octylphenol (4-tOP) and 4-nonylphenol (4-NP), comparing three commercial SPE sorbents (Evolute Express ABN, Bond Elut PPL, and Silica-C18). The best overall extraction performance was obtained using Silica-C18, and the main extraction parameters were optimized. Detection limits of 0.3 µg L-1 for 4-tOP and 1.1 µg L-1 for 4-NP were achieved using HPLC-DAD for analyte separation and quantification. Enrichment factors of 30.1 (4-tOP) and 16.2 (4-NP) were obtained under the selected conditions. The developed method was applied to water and milk powder samples obtaining satisfactory recoveries ranging from 97% to 103%. These results demonstrate the suitability of PolyJet 3D printing for the fabrication of miniaturized cartridges with integrated frits for SPE applications.

Biphasic Magnetic Levitation to Detect Organic Pollutants on Microplastics.

Microplastics have the potential to adsorb organic pollutants due to their lipophilic nature. Evaluating the distribution of multiple organic pollutants in different types of microplastics coexisting in a sample is a strenuous and challenging analytical task. Here, we report position-dependent microplastic trapping in a biphasic medium comprising a paramagnetic aqueous donor phase containing the mixed microplastics and a diamagnetic organic acceptor phase. Depending on the relative height of the sample container positioned in a magnetic field, the selective density-dependent trapping of microplastics is achieved. Concurrently, the organic pollutants adsorbed on the microplastics are desorbed in the organic acceptor phase, which is easily solidified, separated, and transferred for organic pollutant determination by high-performance liquid chromatography. This facilitates analytical studies involving multiple organic pollutants distributed in solid heterogeneous mixtures.

Inexpensive portable capillary electrophoresis instrument for Monitoring Zinc(II) in remote areas.

A compact, inexpensive capillary electrophoresis instrument was developed for monitoring metal ions and evaluated for Zn(II) in remote contaminated locations in western Tasmania, Australia. The portable instrument, measuring 21 cm x 10 cm x 7 cm, was powered from the USB port of a laptop computer and built from off-the-shelf components costing ∼$1200 USD. Electrophoretic separations were conducted using a fused silica capillary (10-50 µm I.D.), applying 8.5 kV over capillaries ranging from 25 cm to 40 cm in length. The capillary inlet was connected with an electrically grounded cross-piece as flow-through injection interface. Automated fluidic management was achieved by controlling four mini peristaltic pumps and a solenoid valve. Detection was realised using a purpose-built visible LED absorption detector, optimised for the detection of Co(II), Cu(II) and Zn(II) after complexation with 4-(2-Pyridylazo) resorcinol (PAR). Limits of detection of sub-µM were obtained. The instrument was tested for continuous operation in the laboratory for up to 3 months, and relative standard deviations of <5.4% were found over 945 consecutive injections. In the field, the system was able to measure 106 samples within 11 h, the time it can be powered from the laptop computer. As Field measurement of Zn(II) in western Tasmania was demonstrated to show capability for on-site metal testing.

Isotachophoresis for rapid transformation of Escherichia coli.

A frequent limitation of electroporation (EP) and chemical transformation (CT) are the need of tedious and time-consuming procedures for inducing transformation competence, the substantial number of cells required, and the low transformation yields typically achieved. Here, we show a new and rapid electrokinetic method for transformation of small number of noncompetent Escherichia coli TOP10 cells (2-3 × 105 ) at room temperature. Escherichia coli TOP10 cells and plasmid DNA are sequentially injected into a 50 µm ID capillary and focused into 11.5 nL by isotachophoresis (ITP) induced by application of high DC voltage (-16 kV). Through ITP, a large excess of plasmid DNA is brought in contact with the cell surface, with the contact time adjusted by application of a counter-pressure (1.3 psi) opposing the ITP movement. The transformation rate was more than 1000-fold higher compared to EP and CT at survival rates greater than 60%.

Porphyrin-based colorimetric sensing of perfluorooctanoic acid as proof of concept for perfluoroalkyl substance detection.

A functionalized porphyrin receptor was prepared to bind perfluorooctanoic acid. UV-Vis spectroscopic analysis showed the receptor gave a rapid colorimetric response that could also be detected visually at environmentally relevant concentrations. Spiked soil samples were used to demonstrate detection of perfluorooctanoic acid without intensive sample pre-treatment or laboratory instrument analysis.

Hyphenated sample preparation-electrospray and nano-electrospray ionization mass spectrometry for biofluid analysis.

Stand-alone electrospray ionization mass spectrometry (ESI-MS) has been advancing through enhancements in throughput, selectivity and sensitivity of mass spectrometers. Unlike traditional MS techniques which usually require extensive offline sample preparation and chromatographic separation, many sample preparation techniques are now directly coupled with stand-alone MS to enable outstanding throughput for bioanalysis. In this review, we summarize the different sample clean-up and/or analyte enrichment strategies that can be directly coupled with ESI-MS and nano-ESI-MS for the analysis of biological fluids. The overview covers the hyphenation of different sample preparation techniques including solid phase extraction (SPE), solid phase micro-extraction (SPME), slug flow micro-extraction/nano-extraction (SFME/SFNE), liquid extraction surface analysis (LESA), extraction electrospray, extraction using digital microfluidics (DMF), and electrokinetic extraction (EkE) with ESI-MS and nano-ESI-MS.

Automated liquid-liquid extraction of organic compounds from aqueous samples using a multifunction autosampler syringe.

Liquid-liquid extraction is one of the most widely used and simplest sample preparation techniques. However, consumption of large volumes of organic solvent and manual handling are two major drawbacks of this technique. A multifunction autosampler syringe is introduced which permits automated liquid-liquid extraction in an enclosed operating environment, with low consumption of organic solvents. The device described herein features a micromixer function in addition to common autosampler syringe features like accurate and precise aspirating and dispensing. To test the functionality of the micromixer syringe, manual extraction of caffeine from a tea infusion and semi-automated extraction of dichloroethane from water were carried out. Excellent recoveries of caffeine from a tea infusion (89% recovery with 1.3% RSD) and dichloroethane from water (107% recovery with 10% RSD) were obtained. Two automated workflows were tested using the micromixer syringe mounted in a laboratory autosampler. Standalone automated micro liquid-liquid extraction was performed for sample preparation of selected polychlorinated biphenyl (PCB) congeners prior to comprehensive two-dimensional gas chromatography - electron capture detection analysis. Extraction of PCBs using the described approach used substantially less solvent than a validated solid-phase extraction approach whilst delivering equivalent results for samples with high-level PCBs. Finally, fully automated extraction and GC-MS analysis of polynuclear aromatic hydrocarbons (PAHs) from water samples was performed. Mean recoveries of extraction for PCB and PAH analysis were > 70% using 4 min automated liquid-liquid extractions.

Scalable 3D printing method for the manufacture of single-material fluidic devices with integrated filter for point of collection colourimetric analysis.

Assembly and bonding are major obstacles in manufacturing of functionally integrated fluidic devices. Here we demonstrate a single-material 3D printed device with an integrated porous structure capable of filtering particulate matter for the colourimetric detection of iron from soil and natural waters. Selecting a PolyJet 3D printer for its throughput, integrated filters were created exploiting a phenomenon occurring at the interface between the commercially available build material (Veroclear-RGD810) and water-soluble support material (SUP707). The porous properties were tuneable by varying the orientation of the print head relative to the channel and by varying the width of the build material. Porous structures ranging from 100 to 200 µm in thickness separated the sample and reagent chambers, filtering particles larger than 15 µm in diameter. Maintaining the manufacturing throughput of the Polyjet printer, 221 devices could be printed in 1.5 h (∼25 s per device). Including the 12 h post-processing soak in sodium hydroxide to remove the solid support material, the total time to print and process 221 devices was 13.5 h (3.6 min per device), with a material cost of $2.50 each. The applicability of the fluidic device for point of collection analysis was evaluated using colourimetric determination of iron from soil slurry and environmental samples. Following the reduction of Fe3+ to Fe2+ using hydroxylammonium chloride, samples were introduced to the fluidic device where particulate matter was retained by the filter, allowing for particulate-free imaging of the red complex formed with 1,10-phenanthroline using a smartphone camera. The calibration curve ranged from of 1-100 mg L-1 Fe2+ and good agreement (95%) was obtained between the point of collection device and Sector Field ICP-MS.

An Open Microfluidic Chip for Continuous Sampling of Solute from a Turbulent Particle Suspension.

High solids content complicates in situ analysis of chemical processing, biological suspensions, and environmental streams. In most cases, analytical methods require at least one pre-treatment step of a small volume of sample before a particle-free fluid can be analyzed. We have developed a continuous in situ sampler that can "sip" particle-free solution from a turbulent high solids content stream (a slurry). An open microfluidic chip with an extended slit opening shields the internal laminar flow from the turbulence outside. Unlike other open chips, our chip does not require close proximity to a solid surface and operates in turbulent environments for hours without maintenance. Two applications are demonstrated: monitoring FeIII in a stirred slurry of mixed ore particles at high solids loading (4 %wt) and paracetamol tablet dissolution profiles for two different formulations.

An electrophoretic ion analyzer for on-site autonomous water monitoring.

An on-site ion analyzer based on capillary electrophoresis with pressure-driven flow through injection and capacitively coupled contactless conductivity detection has been developed for field monitoring of cations and anions in environmental waters. Automated time-pressure based hydrodynamic injection provides stable pL-nL scale injection (RSD = 1.96%, n = 30). A mixture of 400 mM Bis-Tris, 400 mM MOPS and 2 mM 18-crown-6 is used as the background electrolyte to provide repeatable separations. A proprietary hydrophilic coated 25 µm id capillary is used to suppress the electroosmotic flow. Separations of anions (Cl-, NO3-, NO2-, SO42-, F- and PO43-) and cations (NH4+, K+, Na+, Ca2+ and Mg2+) are achieved by switching the polarity of the high voltage power supply in two individual runs. Signal fluctuations caused by the temperature or viscosity changes in on-site monitoring are corrected by on-line introduction of internal standards. RSDs of the migration time and the corrected peak height over ~35 h and 350 analysis cycles are <4.06%. The LODs of inorganic ions are in the range of 2.1 µM (K+) to 6.8 µM (PO43-).  The feasibility for on-site water monitoring with this system has been validated by a standard Ion chromatography method with comparable results obtained.

In-Syringe Electrokinetic Protein Removal from Biological Samples prior to Electrospray Ionization Mass Spectrometry.

Here, an electrokinetic extraction (EkE) syringe is presented allowing for on-line electrokinetic removal of serum proteins before ESI-MS. The proposed concept is demonstrated by the determination of pharmaceuticals from human serum within minutes, with sample preparation limited to a 5× dilution of the sample in the background electrolyte (BGE) and application of voltage, both of which can be performed in-syringe. Signal enhancements of 3.6-32 fold relative to direct infusion of diluted serum and up to 10.8 fold enhancement, were obtained for basic and acidic pharmaceuticals, respectively. Linear correlations for the basic drugs by EkE-ESI-MS/MS were achieved, covering the necessary clinical range with LOQs of 5.3, 7.8, 6.1, and 17.8 ng mL-1 for clomipramine, chlorphenamine, pindolol, and atenolol, respectively. For the acidic drugs, the EkE-ESI-MS LOQs were 3.1 µg mL-1 and 2.9 µg mL-1 for naproxen and paracetamol, respectively. The EkE-ESI-MS and EkE-ESI-MS/MS methods showed good accuracy (%found of 81 % to 120 %), precision (≤20 %), and linearity (r>0.997) for all the studied drugs in spiked serum samples.