Comparison of chairside rectangular chain retainers and multi-stranded conventional retainers: a randomized controlled trial.

BACKGROUND: While retention appliances are widely used in orthodontics, there is still no evidence-based consensus regarding the optimal type of appliance or time of retention. OBJECTIVES: To compare chairside rectangular chain retainers, which can be placed in one sitting, with conventional multi-stranded bonded retainers regarding their levels of stability, biological side effects, complications, and patient experiences. TRIAL DESIGN: A single-centre, two-arm, parallel-group randomized controlled trial. METHODS: In total, 48 patients were included in this single-centre, randomized controlled trial conducted in Varberg, Region Halland, Sweden. The patients were randomized to two groups: the chairside rectangular chain retainer group, using the Ortho FlexTech retainer (OFT); and the conventional retainer group, using the 0.0195 Penta One multi-stranded spiral wire (PeO). The primary outcome was Little´s irregularity index (LII) evaluated at debond (T0) and at 3 months (T3) and 12 months (T12). The secondary outcomes were inter-canine distance (ICD), plaque index (PI), calculus index (CI), bleeding on probing (BoP), and caries, evaluated at T0, T3, and T12, as well as patients' perceptions, evaluated at T3 and T12, and technical complications that were registered throughout the study period. The Mann-Whitney U-test was used for continuous variables for inter-group comparisons, and the Wilcoxon Signed Rank test was used for intra-group comparisons. RESULTS: There were no statistically significant differences between the groups regarding LII, biological side effects, technical complications, or patients' experiences. However, there was a small but statistically significant difference between the groups regarding the maintenance of the ICD. Within the OFT group, there was a significant increase in CI, and within the PeO group, there was a significant increase in BoP. CONCLUSIONS: In terms of clinical relevance, the chairside rectangular chain retainer and the conventional multi-stranded spiral wire provide similar outcomes with respect to the stability of alignment, biological side-effects, technical complications, and patients' experiences short-term. TRIAL REGISTRATION: VGFOUreg-929962. Keywords: Orthodontic retainers; fixed retainers; retention; stability.

Pre-fabricated chain retainers as an alternative to traditional retainers.

Background/purpose: Preserving the outcome of orthodontic treatment is both important and challenging. However, there is insufficient evidence regarding the best way to ensure long-term treatment outcome. The aim of this study was to evaluate a pre-fabricated chain retainer (PFCR) in terms of: ability to maintain satisfactory treatment outcomes; periodontal and dental health; complications; and patient satisfaction. Materials and methods: Overall, 130 patients who had completed orthodontic treatment with a fixed appliance during the period 2016-2019 (follow-up time range, 24-55 months) at a specialist orthodontic clinic in Varberg, Sweden and who had a PFCR in the lower jaw were invited to take part in the study. Little's irregularity index (LII) was recorded on dental casts. Caries, gingivitis, calculus, probing pocket depth, and gingival retractions were registered during clinical examinations. Patient satisfaction and retainer complications were evaluated using a questionnaire. Results: In total, 76 patients (58.5%) agreed to participate. All patients, except for one, had their retainer still in place, and the complication rate was 40%. The LII scores were in the range of 0-4 mm (mean, 1.42 mm). At the retainer site, 82% had calculus, 74% had gingivitis, 1% had pocket depth >4 mm, 10.5% had gingival retractions >2 mm, and 0% had caries. All the patients expressed satisfaction with their retainer. Conclusion: PFCRs exhibit characteristics similar to those of traditional bonded retainers in terms of complications, stability, side-effects and patient experience. Therefore, they can be considered a viable alternative to traditional retainers installed in the lower anterior teeth.

Effect of drops containing Lactobacillus reuteri (DSM 17938 and ATCC PTA 5289) on plaque acidogenicity and other caries-related variables in orthodontic patients.

BACKGROUND: The purpose of the study was to investigate the effect of probiotics on biofilm acidogenicity and on the number of salivary Streptococcus mutans and lactobacilli in orthodontic patients. METHODS: This RCT was conducted on 28 young adults who were undergoing orthodontic treatment. The short-term prospective clinical trial lasted for three weeks. The test group rinsed daily with drops containing two Lactobacillus reuteri strains diluted in water, while the placebo group used drops without probiotics. The subjects were enrolled eight months since the beginning of orthodontic treatment. Plaque-pH, saliva and dental biofilm samples were obtained at baseline, one week and three weeks post intervention. RESULTS: Twenty-seven subjects successfully completed the trial period, only one drop out in the test group. No side effects were reported. A statistically significant increase in plaque pH at three weeks post-intervention was found for the test group (p < 0.05), while insignificant changes in the pH value were found for the placebo group in comparison to baseline (p > 0.05). In addition, the AUC7.0 showed a significant difference at three weeks between the test and placebo (p = 0.00002). The three-week samples of stimulated whole saliva showed a statistically insignificant difference in the number of S. mutans and lactobacilli between the two groups (p > 0.05). The qPCR analysis showed the ability of the two strains to get colonized in the dental biofilm without a significant effect on the microbial counts. CONCLUSION/CLINICAL IMPLICATIONS: A mixture of Lactobacillus reuteri has the ability to reduce the pH fall at the three-week follow-up. However, the short-term use of probiotics does not appear to have an effect on the number of salivary Streptococcus mutans and lactobacilli in saliva and on the dental biofilm. TRIAL REGISTRATION: Clinicaltrial.gov (Identifier: NCT04593017 / (19/10/2020)).

Oral Colonisation after the Administration of Drops Containing Lactobacillus reuteri.

PURPOSE: To investigate the oral colonisation potential after four weeks' administration of Lactobacillus reuteri and to examine the short-term effect of probiotics on salivary Streptococcus mutans and lactobacilli. MATERIALS AND METHODS: The study group comprised 13 young adults who volunteered after receiving verbal and written information. The short-term prospective clinical trial lasted 9 weeks, consisting of a 4-week intervention period with administration twice daily and a 5-week post-administration follow-up period with no probiotic consumption. Saliva and dental biofilm samples were obtained immediately before probiotic administration, after 2 weeks and after 4 weeks of L. reuteri administration. Follow-up samples were collected once every week on a regular basis after administration was terminated. The numbers of salivary S. mutans and lactobacilli were assessed by regular plating, while the presence of the two L. reuteri strains in saliva and dental biofilm was evaluated using quantitative polymerase chain reaction (qPCR). RESULTS: The occurrence of L. reuteri in the oral cavity increased gradually during the intervention period and reached the maximum level after four weeks of probiotic administration (p < 0.0001). The 4-week samples of stimulated whole saliva showed a statistically significant decrease in the number of S. mutans and a statistically significant increase in the salivary lactobacilli level in comparison to baseline. qPCR showed that the DSM 17938 strain has better colonisation for both saliva and dental biofilm than the ATCC PTA 5289 strain at the nine-week follow-up. CONCLUSION: Probiotics have the ability to colonise the oral cavity during usage, but it gradually disappears after the completion of intake. It also has ability to decrease the number of salivary S. mutans.

The effect of retraining hypofunctional jaw muscles on the transverse skull dimensions of adult rats.

OBJECTIVE: To experimentally investigate the effects of increased masticatory muscle function on the transverse cranial dimensions on adult rats with an earlier reduced masticatory muscle function. MATERIAL AND METHOD: Sixty young male rats were used. The experimental group received soft diet for a prolonged period, so that the animals developed weak masticatory muscles. A control group received ordinary hard food during the whole experimental period (27 weeks). After 21 weeks when the animals had nearly ceased their body growth the rats in the experimental group were divided into two groups. One group continued with soft diet until the end of the experiment (hypofunctional group). The other group received ordinary hard food to get the possibility to retrain their masticatory muscles (rehabilitation group). At week 21 and at the end of the experimental period (week 27), axial cephalograms were taken. Fourteen landmarks were defined to measure seven transverse distances of the skull. RESULTS: The increase of the anterior zygomatic arch width and interzygomatic width during the experimental period were larger in the rehabilitation group compared to both the normal and the hypofunctional group. CONCLUSION: Retraining of masticatory muscles in adult rats leads to increase of some transverse cranial dimensions.

Effect of different masticatory functional demands on the 3D mandibular condyle morphology of growing rats using posterior bite-blocks.

Background and objectives: Apart from the primary effect of bite-blocks on tooth position, they may also influence the mandibular condylar growth. Our aim was to investigate their influence on the condylar morphology, with variable masticatory forces. Material and methods: Fifty-two 4-week old male rats were divided into hard and soft diet groups in order to create individuals with different masticatory muscle capacity. Two weeks later, they were equally divided into bite-block and control groups. After a total of 6 weeks experimental time, the animals were sacrificed. The mandibles were scanned with high-resolution micro-CT and 3D analysis was performed on the condylar neck and head of the condyle. The volume and the length of the condylar process were measured. Statistical analysis was done with a one-way analysis of variance. Results: The use of bite-blocks decreased the length of the condylar process (P = 0.001) as well as the volume of the condylar neck (P = 0.001) and head (P = 0.006). The soft diet decreased the volume of the condylar neck (P < 0.001) and head (P < 0.001) two to three times more than the bite-blocks but did not affect the condylar process length. The interaction between the two variables was not statistically significant. Conclusions: Both the bite-block appliance and weak masticatory muscle function reduced the volume at all regions of the condylar process, although the functional factor had a substantially greater effect. However, only the bite-block appliance affected the condylar process length. In the presence of both factors, an additive effect was found but no interaction detected.

Cone-beam computed tomographic evaluation of the long-term effects of orthodontic retainers on marginal bone levels.

INTRODUCTION: Fixed retainers are widely used after orthodontic treatment, sometimes for extended periods, despite insufficient knowledge of their possible long-term adverse effects on the periodontium. The aim of this study was to evaluate whether bonded orthodontic retainers have an adverse long-term effect on the marginal bone levels of the mandibular front teeth. METHODS: The study included 62 consecutive patients in 3 groups: (1) patients who underwent orthodontic treatment and wore a fixed retainer for 10 years, (2) patients who underwent orthodontic treatment but did not have a fixed retainer, and (3) untreated controls. The marginal bone levels were measured by cone-beam computed tomography 10 years after treatment. Additionally, multivariate data analysis was used to analyze possible correlations between the marginal bone levels at 10 years and the variables obtained from the study casts and profile radiographs. RESULTS: The results demonstrated a significantly lower marginal bone level on the buccal side of the mandibular front teeth in the orthodontically treated patients compared with the orthodontically untreated group. There was no difference in the marginal bone levels between the retainer group and the no-retainer group. Multivariate analysis indicated that a low marginal bone level was correlated with a basal open vertical relationship, posterior rotation of the mandible, pretreatment of the incisor protrusion, and extraction therapy. CONCLUSIONS: Within the limits of this research design, the long-term retention phase in general does not seem to cause any adverse effects on the marginal bone levels after 10 years.

The influence of altered functional loading and posterior bite-blocks on the periodontal ligament space and alveolar bone thickness in rats.

OBJECTIVES: Posterior bite-blocks are resin-based structures elevating the occlusion and creating intrusive force on the posterior teeth. Bite-blocks were applied to the molars of growing rats and a hard and soft diet was used to create altered functional masticatory forces. The aim of the present investigation was to study the effect of this appliance on the periodontal ligament space and alveolar bone thickness when combined with altered masticatory forces. MATERIAL AND METHODS: Fifty-two four-week-old rats were divided into two groups, hard and soft diet. Two weeks later, half of them received a bite-block appliance, creating four groups: control hard (CH), control soft (CS), bite-block hard (BH) and bite-block soft (BS). All were sacrificed at age of 10 weeks. Their heads were scanned by micro-CT and periodontal ligament space (PDL) width, cross-sectional alveolar socket surface and alveolar bone thickness were measured. Analysis of variance (ANOVA) was used to compare the groups. RESULTS: The PDL was 9.2% thinner in the CS group (p < 0.001) and 20.7% in the bite-block groups (p < 0.001) compared to the CH group. Within each of the four groups, the mesiodistal PDL space was larger than the palatobuccal. The alveolar bone was thinner by 5.8% (p = 0.018) in the CS group, 10.7% in the BH group (p < 0.001) and 16.7% in the BS group (p < 0.001) compared to the CH group. CONCLUSIONS: Young rats wearing posterior bite-blocks have narrower PDL space and thinner alveolar bone compared to controls. When fed a soft diet, the alveolar bone is even thinner but the PDL showed no difference.

Digital casts in orthodontics: a comparison of 4 software systems.

INTRODUCTION: The introduction of digital cast models is inevitable in the otherwise digitized everyday life of orthodontics. The introduction of this new technology, however, is not straightforward, and selecting an appropriate system can be difficult. The aim of the study was to compare 4 orthodontic digital software systems regarding service, features, and usability. METHODS: Information regarding service offered by the companies was obtained from questionnaires and Web sites. The features of each software system were collected by exploring the user manuals and the software programs. Replicas of pretreatment casts were sent to Cadent (OrthoCAD; Cadent, Carlstadt, NJ), OthoLab (O3DM; OrthoLab, Poznan, Poland), OrthoProof (DigiModel; OrthoProof, Nieuwegein, The Netherlands), and 3Shape (OrthoAnalyzer; 3Shape, Copenhagen, Denmark). The usability of the programs was assessed by experts in interaction design and usability using the "enhanced cognitive walkthrough" method: 4 tasks were defined and performed by a group of domain experts while they were observed by usability experts. RESULTS: The services provided by the companies were similar. Regarding the features, all 4 systems were able to perform basic measurements; however, not all provided the peer assessment rating index or the American Board of Orthodontics analysis, simulation of the treatment with braces, or digital articulation of the casts. All systems demonstrated weaknesses in usability. However, OrthoCAD and 03DM were considered to be easier to learn for first-time users. CONCLUSIONS: In general, the usability of these programs was poor and needs to be further developed. Hands-on training supervised by the program experts is recommended for beginners.

Diagnosing the severity of buccal caries lesions in orthodontic patients at de-bonding using digital photographs.

OBJECTIVE: The aims of this study were (1) to evaluate the severity of buccal caries lesions according to the International Caries Detection and Assessment System (ICDAS) criteria via scoring buccal caries lesions on digital photographs at the time of de-bonding and (2) to compare this method with clinical examination. MATERIALS AND METHODS: In total, 89 patients treated with upper and lower fixed appliances were clinically examined immediately after de-bonding by the first author and buccal caries were scored according to the ICDAS-II. Close-up digital photographs were taken of 245 teeth with different buccal caries lesion scores according to the ICDAS-II. Thirteen postgraduate orthodontics students independently scored the buccal caries lesions in the digital photographs using the modified clinical criteria (ICDAS-II). Intra- and inter-examiner reliabilities were evaluated by calculating the weighted kappa. To evaluate the validity of diagnosing the severity of buccal caries lesions using digital photographs compared to clinical examination, Spearman's correlation coefficient was calculated. RESULTS: Intra-examiner reliability and the reliability between each examiner and the clinical examination showed moderate-to-excellent agreement, with kappa values of 0.52-0.83. Scoring buccal caries lesions via clinical examinations and scoring via photographs were well correlated according to the modified ICDAS-II criteria (Spearman's correlation coefficient, 0.76). CONCLUSIONS: Thus, scoring buccal caries lesions on digital photographs according to ICDAS-II criteria is a reliable and valid method for assessing the severity of buccal caries lesions.

Influence of masticatory hypofunction on the alveolar bone and the molar periodontal ligament space in the rat maxilla.

Previous studies have established that complete absence of masticatory function results in a narrower alveolar process and periodontal ligament (PDL). The aim of our study was to investigate, for the first time, both the alveolar process and the PDL in masticatory hypofunction. Twenty-six rats, 3 wk of age, were randomly assigned to either a hard- or a soft-diet group (n = 13 each group). The rats were killed after 6 wk and their skulls were scanned using micro-computed tomography (micro-CT). We measured the cross-sectional width of the space occupied by the PDL, as well as the cross-sectional alveolar socket surface (AS) and the cross-sectional root surface (RS). We also measured the width of the alveolar process. The alveolar process was narrower, the PDL width was thinner, and the AS was smaller in rats fed a soft diet compared with rats fed a hard diet. The PDL width was correlated to the alveolar process width and the AS. The narrower alveolar process found in rats fed a soft diet is the result of alterations to both the alveolar bone and the PDL. The correlation between them provides evidence that a reduction of occlusal loading induces a simultaneous response in both tissues.

Functional influence on sutural bone apposition in the growing rat.

INTRODUCTION: The aim of this study was to quantify the influence of reduced masticatory muscle function on sutural bone apposition in the growing rat. METHODS: Twenty-six growing male albino rats were randomly divided into 2 equal groups; 1 (hard-diet group) received the ordinary diet of hard pellets, and the other (soft-diet group) received the powdered form of the ordinary diet mixed with water. The experimental period started when the rats were 4 weeks old and lasted 42 days. At days 0, 14, and 28, calcein was injected into all animals. At the end of the experiment, the animals were killed, and the heads were taken for preparation of undecalcified frontal sections, 120 microm thick. Three representative homologous sections for each animal in both groups were selected and studied under a fluorescence microscope. The level of bone apposition at the time of calcein injection was marked with separate fluorescing lines. Because the lines from the first injection could not be seen in all areas, bone apposition in the internasal, naso-premaxillary, and inter-premaxillary sutures was quantified from day 14 to the end of the experimental period, by using an image analysis software. RESULTS: In both groups, greater bone apposition was found between days 14 and 28 than between days 28 and 42 of the experimental period. Less bone apposition was found in the soft-diet group than in the hard-diet group in all sutures studied. CONCLUSIONS: The findings suggest that bone apposition in the studied facial sutures in the anterior facial skeleton of the growing rat is significantly affected by reduced masticatory function.

Masticatory demands induce region-specific changes in mandibular bone density in growing rats.

This study investigates the structural adaptation of the mandibular bone when subjected to different masticatory functional and mechanical demands during growth. The effect of two experimental factors, the insertion of a bite block and the alteration of food consistency, on the bone mineral density (BMD) of the mandible was investigated in growing rats. Fifty-two male albino rats were divided into two equal groups, fed with either the standard hard diet or soft diet, at the age of four weeks. After two weeks, half the animals in both groups had their upper molars fitted with an upper posterior bite block. The remaining animals served as a control. Region-specific BMD of the mandible was subsequently measured using dual-energy X-ray absorptiometry (DXA). Soft diet and the consequent reduction of the forces applied to the mandible during mastication resulted in the reduction of BMD in all regions under study. The insertion of the bite-opening appliance (bite block) and the resulting stretching of the soft tissues led to the application of a continuous light force on the lower molars, which was associated with a significant increase of the BMD in the part of the alveolar process just below the root apices. These results raise the question of whether orthodontic treatment with similar appliances may have some, previously unsuspected, short- or long-term effects on the mandibular bone during growth and whether their effects depend on the individual soft-tissue characteristics.

Morphometric analysis of the mandible in growing rats with different masticatory functional demands: adaptation to an upper posterior bite block.

Functional appliances displace the mandible forward and/or downward, causing a stretching of the orofacial soft tissues, muscles included. The resulting forces are directly or indirectly transmitted to the underlying dento-skeletal tissues. The hypothesis underlying the present investigation was that the insertion of a bite-opening appliance influences the lateral morphology of the rat mandible during growth, and that, moreover, this influence depends on the masticatory functional demands. One-hundred and four 4-wk-old male albino rats were divided into two groups, fed a hard and soft diet, respectively. After 2 wk, half of the animals in each experimental group were fitted with upper posterior blocks, and 4 wk later they were killed. Their left hemi-mandibles were transilluminated, photographed under magnification, and digitized on screen. A total of 170 points were used to draw the lateral outline of the mandible. In addition to the inhibitory effect on the height of the dento-alveolar process, the upper bite block resulted in significant changes in the condyle inclination, the length of the coronoid process, and the occlusal plane inclination. Masticatory functional demands influenced this adaptation in an additive way. The results raise the question of whether orthodontic treatment with posterior bite blocks might have different effects on the mandible, depending on the characteristics of the orofacial soft tissues.

Dento-skeletal adaptation after bite-raising in growing rats with different masticatory muscle capacities.

The aim of this study was to analyse the effects of normal and hypofunctional masticatory muscles on dento-skeletal adaptation to posterior bite blocks in growing rats. Fifty-two young male rats were divided into two groups, fed a hard and soft diet, respectively, to develop different functional capacities in the masticatory muscles. Bone markers were inserted in the mandible on day 0. After two weeks, an appliance that raised the bite by 2 mm was inserted in half of each group. Lateral radiographs were taken on day 0, 14, 28, and 42 of the experiment. Images of the mandible were superimposed on the bone markers. Differences in cephalometric measurements were analysed by two-way ANOVA. The reduced muscle capacity resulted in an upward growth of the snout and a shorter mandibular ramus with less bone apposition on its lower border. Bite blocks induced a more upward growth of the snout and a shorter mandibular ramus, and inhibited the eruption of the upper molars and intruded the lower molars. The rats with weaker masticatory muscles had less inhibitory effect of the posterior bite blocks on upper molar eruption and showed different bone apposition in the ramus, especially during the first two weeks. In conclusion, masticatory muscle capacity seems to influence the effect of the posterior bite blocks on both tooth eruption and skeletal adaptation. The results suggest that the characteristics of the masticatory muscles should be taken into account when predicting the efficiency of a functional appliance.