RESUMEN
Understanding the dynamics of excited states after optical excitation at donor-acceptor (D/A) interfaces is of paramount importance for improving the efficiency and performance of optoelectronic devices. Here, we studied the ultrafast excited state dynamics after optical excitation at interfaces between the electron donor (D) pentacene (PEN) and the electron acceptor (A) perfuoropentacene (PFP) as well as within the single compounds (PEN and PFP) using femtosecond (fs) time-resolved second harmonic generation (SHG). In the single compounds singlet fission is observed on a time scale of around 200â fs. In the bilayer systems a huge SHG intensity rise is observed due to the creation of charge transfer states at the interface and accordingly to formation of a local electric field within tens of picoseconds. The local electric field and therefore the SHG signal intensity from the interface of PEN/PFP bilayer is much more intense compared to the PFP/PEN system because the PFP and PEN intermixing at the PEN/PFP interface is higher. Accordingly a population of defect states on a time scale of 55±12â ps has been proposed for PEN/PFP. Our study provides important insights into D/A charge transfer properties, which is needed for the understanding of the interfacial photophysics of pentacene-based organic compounds.
RESUMEN
Modifying the optical and electronic properties of crystalline organic thin films is of great interest for improving the performance of modern organic semiconductor devices. Therein, the statistical mixing of molecules to form a solid solution provides an opportunity to fine-tune optical and electronic properties. Unfortunately, the diversity of intermolecular interactions renders mixed organic crystals highly complex, and a holistic picture is still lacking. Here, we report a study of the optical absorption properties in solid solutions of pentacene and tetracene, two prototypical organic semiconductors. In the mixtures, the optical properties can be continuously modified by statistical mixing at the molecular level. Comparison with time-dependent density functional theory calculations on occupationally disordered clusters unravels the electronic origin of the low energy optical transitions. The disorder partially relaxes the selection rules, leading to additional optical transitions that manifest as optical broadening. Furthermore, the contribution of diabatic charge-transfer states is modified in the mixtures, reducing the observed splitting in the 0-0 vibronic transition. Additional comparisons with other blended systems generalize our results and indicate that changes in the polarizability of the molecular environment in organic thin-film blends induce shifts in the absorption spectrum.
RESUMEN
The photophysics of organic semiconductor (OSC) thin films or crystals has garnered significant attention in recent years since a comprehensive theoretical understanding of the various processes occurring upon photoexcitation is crucial for assessing the efficiency of OSC materials. To date, research in this area has relied on methods using Frenkel-Holstein Hamiltonians, calculations of the GW-Bethe-Salpeter equation with periodic boundaries, or cluster-based approaches using quantum chemical methods, with each of the three approaches having distinct advantages and disadvantages. In this work, we introduce an optimally tuned, range-separated time-dependent density functional theory approach to accurately reproduce the total and polarization-resolved absorption spectra of pentacene, tetracene, and perylene thin films, all representative OSC materials. Our approach achieves excellent agreement with experimental data (mostly ≤0.1 eV) when combined with the utilization of clusters comprising multiple monomers and a standard polarizable continuum model to simulate the thin-film environment. Our protocol therefore addresses a major drawback of cluster-based approaches and makes them attractive tools for OSC investigations. Its key advantages include its independence from external, system-specific fitting parameters and its straightforward application with well-known quantum chemical program codes. It demonstrates how chemical intuition can help to reduce computational cost and still arrive at chemically meaningful and almost quantitative results.
RESUMEN
Evidence shows that charge carriers in organic semiconductors self-localize because of dynamic disorder. Nevertheless, some organic semiconductors feature reduced mobility at increasing temperature, a hallmark for delocalized band transport. Here we present the temperature-dependent mobility in two record-mobility organic semiconductors: dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]-thiophene (DNTT) and its alkylated derivative, C8-DNTT-C8. By combining terahertz photoconductivity measurements with atomistic non-adiabatic molecular dynamics simulations, we show that while both crystals display a power-law decrease of the mobility (µ) with temperature (T) following µ â T -n, the exponent n differs substantially. Modelling reveals that the differences between the two chemically similar semiconductors can be traced to the delocalization of the different states that are thermally accessible by charge carriers, which in turn depends on their specific electronic band structure. The emerging picture is that of holes surfing on a dynamic manifold of vibrationally dressed extended states with a temperature-dependent mobility that provides a sensitive fingerprint for the underlying density of states.
RESUMEN
Perylene-based organic semiconductors are widely used in organic electronic devices. Here, we studied the ultrafast excited state dynamics after optical excitation at interfaces between the electron donor (D) diindenoperylene (DIP) and the electron acceptor (A) dicyano-perylene-bis(dicarboximide) (PDIR-CN2 ) using femtosecond time-resolved second harmonic generation (SHG) in combination with large scale quantum chemical calculations. Thereby, we varied in bilayer structures of DIP and PDIR-CN2 the interfacial molecular geometry. For an interfacial configuration which contains a edge-on geometry but also additional face-on domains an optically induced charge transfer (CT) is observed, which leads to a pronounced increase of the SHG signal intensity due to electric field induced second harmonic generation. The interfacial CT state decays within 7.5±0.7â ps, while the creation of hot CT states leads to a faster decay (5.3±0.2â ps). For the bilayer structures with mainly edge-on geometries interfacial CT formation is suppressed since π-π overlap perpendicular to the interface is missing. Our combined experimental and theoretical study provides important insights into D/A charge transfer properties, which is needed for the understanding of the interfacial photophysics of these molecules.
RESUMEN
Utilizing strong light-matter coupling is an elegant and powerful way to modify the energy landscapes of excited states of organic semiconductors. Consequently, the chemical and photophysical properties of these organic semiconductors can be influenced without the need of chemical modification but simply by implementing them in optical microcavities. This has so far mostly been shown in Fabry-Pérot cavities and with organic single crystals or diluted molecules in a host matrix. Here, we demonstrate strong, simultaneous coupling of the two Davydov transitions in polycrystalline pentacene thin films to surface lattice resonances supported by open cavities made of silver nanoparticle arrays. Such thin films are more easily fabricated and, together with the open architecture, more suitable for device applications.
RESUMEN
Conjugated polymer field-effect transistors are emerging as an enabling technology for flexible electronics due to their excellent mechanical properties combined with sufficiently high charge-carrier mobilities and compatibility with large-area, low-temperature processing. However, their electrical stability remains a concern. ON-state (accumulation mode) bias-stress instabilities in organic semiconductors have been widely studied, and multiple mitigation strategies have been suggested. In contrast, OFF-state (depletion mode) bias-stress instabilities remain poorly understood despite being crucial for many applications in which the transistors are held in their OFF-state for most of the time. Here, a simple method of using an antisolvent treatment is presented to achieve significant improvements in OFF-state bias-stress and environmental stability as well as general device performance for one of the best performing polymers, solution-processable indacenodithiophene-co-benzothiadiazole (IDT-BT). IDT-BT is weakly crystalline, and the notable improvements to an antisolvent-induced, increased degree of crystallinity, resulting in a lower probability of electron trapping and the removal of charge traps is attributed. The work highlights the importance of the microstructure in weakly crystalline polymer films and offers a simple processing strategy for achieving the reliability required for applications in flexible electronics.
RESUMEN
Vibronic coupling has been proposed to play a decisive role in promoting ultrafast singlet fission (SF), the conversion of a singlet exciton into two triplet excitons. Its inherent complexity is challenging to explore, both from a theoretical and an experimental point of view, due to the variety of potentially relevant vibrational modes. Here, we report a study on blends of the prototypical SF chromophore pentacene in which we engineer the polarizability of the molecular environment to scan the energy of the excited singlet state (S1) continuously over a narrow energy range, covering vibrational sublevels of the triplet-pair state (1(TT)). Using femtosecond transient absorption spectroscopy, we probe the dependence of the SF rate on energetic resonance between vibronic states and, by comparison with simulation, identify vibrational modes near 1150 cm-1 as key in facilitating ultrafast SF in pentacene.
RESUMEN
Theoretical studies using clusters as model systems have been extremely successful in explaining various photophysical phenomena in organic semiconductor (OSC) thin films. But they have not been able to satisfactorily simulate total and polarization-resolved absorption spectra of OSCs so far. In this work, we demonstrate that accurate spectra are predicted by time-dependent density functional theory (TD-DFT) when the employed cluster reflects the symmetry of the crystal structure and all monomers feel the same environment. Additionally, long-range corrected optimal tuned functionals are mandatory. For pentacene thin films, the computed electronic spectra for thin films then reach an impressive accuracy compared with experimental data with a deviation of less than 0.1 eV. This allows for accurate peak assignments and mechanistic studies, which paves the way for a comprehensive understanding of OSCs using an affordable and easy-to-use cluster approach.
RESUMEN
Hybrid organic-inorganic nanomaterials composed of organic semiconductors and inorganic quantum dots (QDs) are promising candidates for opto-electronic devices in a sustainable internet of things. Especially their ability to combine the advantages of both compounds in one material with new functionality, the energy-efficient production possibility and the applicability in thin films with little resource consumption are key benefits of these materials. However, a major challenge one is facing for these hybrid materials is the lack of a detailed understanding of the organic-inorganic interface which hampers the widespread application in devices. We advance the understanding of this interface by studying the short-range organization and binding motif of aryleneethynylenes coupled to CdSe QDs as an example system with various experimental methods. Clear evidence for an incorporation of the organic ligands in between the inorganic QDs is found, and polarization-modulation infrared reflection-absorption spectroscopy is shown to be a powerful technique to directly detect the binding in such hybrid thin-film systems. A monodentate binding and a connection of neighboring QDs by the aryleneethynylene molecules is identified. Using steady-state and time resolved spectroscopy, we further investigated the photophysics of these hybrid systems. Different passivation capabilities resulting in different decay dynamics of the QDs turned out to be the main influence of the ligands on the photophysics.
RESUMEN
The fission of singlet excitons into triplet pairs in organic materials holds great technological promise, but the rational application of this phenomenon is hampered by a lack of understanding of its complex photophysics. Here, we use the controlled introduction of vacancies by means of spacer molecules in tetracene and pentacene thin films as a tuning parameter complementing experimental observables to identify the operating principles of different singlet fission pathways. Time-resolved spectroscopic measurements in combination with microscopic modelling enables us to demonstrate distinct scenarios, resulting from different singlet-to-triplet pair energy alignments. For pentacene, where fission is exothermic, coherent mixing between the photoexcited singlet and triplet-pair states is promoted by vibronic resonances, which drives the fission process with little sensitivity to the vacancy concentration. Such vibronic resonances do not occur for endothermic materials such as tetracene, for which we find fission to be fully incoherent; a process that is shown to slow down with increasing vacancy concentration.
RESUMEN
Singlet fission (SF), the photophysical process in which one singlet exciton is transformed into two triplets, depends inter alia on the coupling of electronic states. Here, we use fluorination and the resulting changes in partial charge distribution across the chromophore backbone as a particularly powerful tool to control this parameter in pentacene. We find that the introduction of a permanent dipole moment leads to an enhanced coupling of Frenkel exciton and charge transfer states and to an increased SF rate which we probed using ultrafast transient absorption spectroscopy. These findings are contrasted with H-aggregate formation and a significantly reduced triplet-pair state lifetime in a fluorinated pentacene for which the different partial charge distribution leads to a negligible dipole moment.
RESUMEN
While the charge transport properties of organic semiconductors have been extensively studied over the recent years, the field of organics-based thermoelectrics is still limited by a lack of experimental data on thermal transport and of understanding of the associated structure-property relationships. To fill this gap, a comprehensive experimental and theoretical investigation of the lattice thermal conductivity in polycrystalline thin films of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (Cn-DNTT-Cn with n = 0, 8) semiconductors is reported. Strikingly, thermal conductivity appears to be much more isotropic than charge transport, which is confined to the 2D molecular layers. A direct comparison between experimental measurements (3ω-Völklein method) and theoretical estimations (approach-to-equilibrium molecular dynamics (AEMD) method) indicates that the in-plane thermal conductivity is strongly reduced in the presence of the long terminal alkyl chains. This evolution can be rationalized by the strong localization of the intermolecular vibrational modes in C8-DNTT-C8 in comparison to unsubstituted DNTT cores, as evidenced by a vibrational mode analysis. Combined with the enhanced charge transport properties of alkylated DNTT systems, this opens the possibility to decouple electron and phonon transport in these materials, which provides great potential for enhancing the thermoelectric figure of merit ZT.
RESUMEN
Archetypal donor-acceptor (D-A) interfaces composed of perfluoropentacene (PFP) and pentacene (PEN) are examined for charge transfer (CT) state formation and energetics as a function of their respective molecular configuration. To exclude morphological interference, our structural as well as highly sensitive differential reflectance spectroscopy studies were carried out on PFP thin films epitaxially grown on PEN(001) single-crystal facets. Whereas the experimental data supported by complementary theoretical calculations confirm the formation of a strong CT state in the case of a cofacial PFP-PEN stacking, CT formation is energetically less favorable and thus absent for the corresponding head-to-tail configuration as disclosed for the first time. In view of technological implementations, the knowledge gained on the single-crystal references is transferred to thin-film diodes composed of either stacked PFP/PEN bilayers or mixed PFP:PEN heterojunction interfaces. As demonstrated, their electronic and electroluminescent behavior can be consistently described by the absence or presence of interfacial CT states. Thus, our results hint at the thorough design of D-A interfaces to achieve the highest device performances.
RESUMEN
Heterofission is a photophysical process of fundamental and applied interest whereby an excited singlet state is converted into two triplets on chemically distinct chromophores. The potential of this process lies in the tuning of both the optical band gap and the splitting between singlet and triplet energies. Herein, we report the time-domain observation of heterofission in mixed thin films of the prototypical singlet fission chromophores pentacene and tetracene using excitation wavelengths above and below the tetracene band gap. We found a time constant of 26â ps for endothermic heterofission of a singlet exciton on pentacene in blends with low pentacene fractions, which was outcompeted by pentacene homofission for increasing pentacene concentrations. Direct excitation of tetracene lead to fast energy transfer to pentacene and subsequent singlet fission, which prevented homo- or heterofission of a singlet exciton on tetracene.
RESUMEN
In organic device applications, a high contact resistance between metal electrodes and organic semiconductors prevents an efficient charge injection and extraction, which fundamentally limits the device performance. Recently, various contact doping methods have been reported as an effective way to resolve the contact resistance problem. However, the contact doping has not been explored extensively in organic field effect transistors (OFETs) due to dopant diffusion problem, which significantly degrades the device stability by damaging the ON/OFF switching performance. Here, the stability of a contact doping method is improved by incorporating "dopant-blockade molecules" in the poly(2,5-bis(3-hexadecylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT) film in order to suppress the diffusion of the dopant molecules. By carefully selecting the dopant-blockade molecules for effectively blocking the dopant diffusion paths, the ON/OFF ratio of PBTTT OFETs can be maintained over 2 months. This work will maximize the potential of OFETs by employing the contact doping method as a promising route toward resolving the contact resistance problem.
RESUMEN
There is a growing interest in utilizing the distinctive material properties of organic semiconductors for spintronic applications. Here, we explore the injection of pure spin current from Permalloy into a small molecule system based on dinaphtho[2,3-b:2,3-f]thieno[3,2-b]thiophene (DNTT) at ferromagnetic resonance. The unique tunability of organic materials by molecular design allows us to study the impact of interfacial properties on the spin injection efficiency systematically. We show that both the spin injection efficiency at the interface and the spin diffusion length can be tuned sensitively by the interfacial molecular structure and side chain substitution of the molecule.
RESUMEN
The properties as well as solid-state structures, singlet fission, and organic field-effect transistor (OFET) performance of three tetrafluoropentacenes (1,4,8,11: 10, 1,4,9,10: 11, 2,3,9,10: 12) are compared herein. The novel compoundsâ 10 and 11 were synthesized in high purity from the corresponding 6,13-etheno-bridged precursors by reaction with dimethyl 1,2,4,5-tetrazine-3,6-dicarboxylate at elevated temperatures. Although most of the molecular properties of the compounds are similar, their chemical reactivity and crystal structures differ considerably. Isomerâ 10 undergoes the orbital symmetry forbidden thermal [4+4] dimerization, whereas 11 and 12 are much less reactive. The isomers 11 and 12 crystallize in a herringbone motif, but 10 prefers π-π stacking. Although the energy of the first electric dipole-allowed optical transition varies only within 370â cm-1 (0.05â eV) for the neutral compounds, this amounts to roughly 1600â cm-1 (0.20â eV) for radical cations and 1300â cm-1 (0.16â eV) for dications. Transient spectroscopy of films of 11 and 12 reveals singlet-fission time constants (91±11, 73±3â fs, respectively) that are shorter than for pentacene (112±9â fs). OFET devices constructed from 11 and 12 show close to ideal thin-film transistor (TFT) characteristics with electron mobilities of 2×10-3 and 6×10-2 â cm2 V-1 s-1 , respectively.
RESUMEN
Singlet exciton fission is a spin-allowed process in organic semiconductors by which one absorbed photon generates two triplet excitons. Theory predicts that singlet fission is mediated by intermolecular charge-transfer states in solid-state materials with appropriate singlet-triplet energy spacing, but direct evidence for the involvement of such states in the process has not been provided yet. Here, we report on the observation of subpicosecond singlet fission in mixed films of pentacene and perfluoropentacene. By combining transient spectroscopy measurements to nonadiabatic quantum-dynamics simulations, we show that direct excitation in the charge-transfer absorption band of the mixed films leads to the formation of triplet excitons, unambiguously proving that they act as intermediate states in the fission process.
RESUMEN
Optoelectronic devices based on conjugated polymers often rely on multilayer device architectures, as it is difficult to design all the different functional requirements, in particular the need for efficient luminescence and fast carrier transport, into a single polymer. Here we study the photophysics of a recently discovered class of conjugated polymers with high charge carrier mobility and low degree of energetic disorder and investigate whether it is possible in this system to achieve by molecular design a high photoluminescence quantum yield without sacrificing carrier mobility. Tracing exciton dynamics over femtosecond to microsecond time scales, we show that nearly all nonradiative exciton recombination arises from interactions between chromophores on different chains. We evaluate the temperature dependence and role of electron-phonon coupling leading to fast internal conversion in systems with strong interchain coupling and the extent to which this can be turned off by varying side chain substitution. By sterically decreasing interchain interaction, we present an effective approach to increase the fluorescence quantum yield of low-energy gap polymers. We present a red-NIR-emitting amorphous polymer with the highest reported film luminescence quantum efficiency of 18% whose mobility concurrently exceeds that of amorphous-Si. This is a key result toward the development of single-layer optoelectronic devices that require both properties.