N-halamine surface coating for mitigation of biofilm and microbial contamination in water systems for space travel.

A copolymer termed HASL produced from monomeric units of 2-acrylamido-2-methyl-1-(5-methylhydantoinyl)propane (HA) and of 3-(trimethoxysilyl)propyl methacrylate (SL) has been coated onto stainless steel and Inconel™ substrates, which upon halogenation with either aqueous oxidative chlorine or bromine, became antimicrobial. It has been demonstrated that the halogenated stainless steel and Inconel™ substrates were effective in producing 6 to 7 log inactivations of Staphylococcus aureus and Escherichia coli O157:H7 within about 10 min, and in prevention of Pseudomonas aeruginosa biofilm formation over a period of at least 72 h on the stainless steel substrates. Upon loss of halogen, the HASL coating could be re-charged with aqueous halogen. The HASL coating was easily applied to the substrates via a simple dip-coating method and was reasonably stable to contact with water. Both chlorinated substrates could be loaded with at least 6 × 1016 oxidative Cl atoms per cm2 and maintained a loading of greater than 1 × 1016 chlorine atoms per cm2 for a period of 3-7 days while agitated in aqueous solution. After loss of chlorine to a level below 1 × 1016 atoms per cm2, the substrates could be recharged to the 6 × 1016 Cl atoms per cm2 level for at least 5 times over a 28 day period. The new antimicrobial coating technology has potential for use in a variety of important applications, particularly for water treatment and storage on spacecraft.

N-Halamine-modified antimicrobial polypropylene nonwoven fabrics for use against airborne bacteria.

Disinfecting, nonbleaching compound 1-chloro-2,2,5,5-tetramethyl-4-imidazolidinone (MC) was uniformly coated onto polypropylene melt-blown nonwoven fabrics having basis-weights of 22 and 50 g/m(2) in order to impart antimicrobial properties via a pad-dry technique. The antimicrobial efficacies of the tested fabrics loaded with MC compound were evaluated against bioaerosols of Staphylococcus aureus and Escherichia coli O157:H7 utilizing a colony counting method. It was determined that both types of coated fabrics exhibited superior antimicrobial efficacy upon exposure to aerosol generation for 3 h. The effect of the coating on air permeability was found to be minimal. Samples were stable for a 6 month time period when they were stored in darkness. However, when the fabrics were exposed to fluorescent light, partial chlorine loss was observed. The MC-coated fabrics exhibited great potential for use in protective face masks and air filters to combat airborne pathogens.

N-halamine copolymers for use in antimicrobial paints.

A series of copolymers containing units of a novel hydantoinylacrylamide and the sodium salt of 2-(acrylamido)-2-methylpropanesulfonic acid have been synthesized. The homopolymer of the hydantoinylacrylamide compound was insoluble in water, while the copolymers with the sulfonic acid sodium salt were water-dispersible/soluble, with the solution becoming completely transparent when the feed ratio for the copolymer contained 7 parts of the hydantoin moiety to 3 parts of the sodium sulfonate moiety. The polymers were added into a commercial water-based latex paint, and upon drying, the painted surfaces treated with the water-miscible copolymers were rendered antimicrobial following chlorination with dilute household bleach. The chlorinated homopolymer failed to provide an antimicrobial property for the paint because of its tendency to isolate into aggregates in the paint, while the completely miscible copolymers were capable of 6-log inactivation of Staphylococcus aureus and Escherichia coli O157:H7 within 5 min of contact time.

Polymeric antimicrobial N-halamine epoxides.

A new N-halamine copolymer has been prepared, characterized, and evaluated for antimicrobial efficacy, stability toward hydrolyses, and stability toward UVA degradation when covalently bound to cellulose fibers. A copolymer of 3-chloro-2-hydroxypropylmethacrylate and glycidyl methacrylate was coated onto cotton, and, after curing, was treated with an aqueous solution containing the potassium salt of 5,5-dimethylhydantoin to form a coating which became antimicrobial upon exposure to househod bleach (sodium hypochlorite). The coating inactivated S. aureus and E. coli O157:H7 within minutes of contact time and was quite stable toward washing and UVA photodegradation.

N-halamine biocidal coatings via a layer-by-layer assembly technique.

Two N-halamine copolymer precursors, poly(2,2,6,6-tetramethyl-4-piperidyl methacrylate-co-acrylic acid potassium salt) and poly(2,2,6,6-tetramethyl-4-piperidyl methacrylate-co-trimethyl-2-methacryloxyethylammonium chloride) have been synthesized and successfully coated onto cotton fabric via a layer-by-layer (LbL) assembly technique. A multilayer thin film was deposited onto the fiber surfaces by alternative exposure to polyelectrolyte solutions. The coating was rendered biocidal by a dilute household bleach treatment. The biocidal efficacies of tested swatches composed of treated fibers were evaluated against Staphylococcus aureus and Escherichia coli. It was determined that chlorinated samples inactivated both S. aureus and E. coli O157:H7 within 15 min of contact time, whereas the unchlorinated control samples did not exhibit significant biocidal activities. Stabilities of the coatings toward washing and ultraviolet light exposure have also been studied. It was found that the stability toward washing was superior, whereas the UVA light stability was moderate compared to previously studied N-halamine moieties. The layer-by-layer assembly technique can be used to attach N-halamine precursor polymers onto cellulose surfaces without using covalently bonding tethering groups which limit the structure designs. In addition, ionic precursors are very soluble in water, thus promising for biocidal coatings without the use of organic solvents.

Mechanism of photolytic decomposition of N-halamine antimicrobial siloxane coatings.

Generally, antimicrobial N-halamine siloxane coatings can be rehalogenated repetitively upon loss of their biocidal efficacies, a marked advantage over coatings containing other antimicrobial materials. However, the N-halamine materials tend to slowly decompose upon exposure to ultraviolet irradiation as in direct sunlight. In this work the mechanism of photolytic decomposition for the N-halamine siloxanes has been studied using spectroscopic and theoretical methods. It was found that the N-chlorinated coatings slowly decomposed upon UVA irradiation, whereas the unhalogenated coatings did not. Model compound evidence in this work suggests that upon UVA irradiation, the N-Cl bond dissociates homolytically, followed by a Cl radical migration to the alkyl side chain connected to the siloxane tethering group. An alpha and/or beta scission then occurs causing partial loss of the biocidal moiety from the surface of the coated material, thus precluding complete rechlorination. NMR, FTIR, GCMS, and computations at the DFT (U)B3LYP/6-311++G(2d,p) level of theory have been employed in reaching this conclusion.

Antimicrobial modification of polyester by admicellar polymerization.

The N-halamine monomer 3-(4'-vinylbenzyl)-5,5-dimethylhydantoin (VBDMH) was synthesized and employed to form thin films on the surfaces of polyester fibers by surface polymerization with the aid of a cationic surfactant. The coated samples were characterized by FTIR and SEM. The thin film coatings could be rendered biocidal by exposure to dilute sodium hypochlorite. The antimicrobial polyesters were challenged with Staphylococcus aureus and Escherichia coli O157:H7. Complete inactivation of S. aureus and E. coli O157:H7 was observed within 10 and 30 min of contact time, respectively. The chlorine bonded to the coatings was very stable under standard washing tests and UVA irradiation tests, and much of the lost chlorine could be regenerated by rechlorination.

Why does Kevlar decompose, while Nomex does not, when treated with aqueous chlorine solutions?

Kevlar and Nomex are high-performance polymers which have wide varieties of applications in daily life. Recently, they have been proposed to be biocidal materials when reacted with household bleach (sodium hypochlorite solution) because they contain amide moieties which can be chlorinated to generate biocidal N-halamine functional groups. Although Nomex can be chlorinated without any significant decomposition, Kevlar decomposes under the same chlorination conditions. In this study, two mimics for each of the polymers were synthesized to simulate the carboxylate and diaminophenylene components of the materials. It was found that the p-diaminophenylene component of the Kevlar mimic is oxidized to a quinone-type structure upon treatment with hypochlorous acid, which then decomposes. However, such a mechanism for the Nomex mimic is not possible. In this paper, based upon these observations, a plausible answer will be provided to the title question.

N-halamine biocidal coatings.

Novel N-halamine siloxane and epoxide coatings are described. The coatings can be rendered biocidal by exposure to dilute bleach. Once the bound chlorine is lost from the coatings, it can be regenerated by further exposure to dilute bleach. Synthetic schemes and biocidal efficacy data are presented. The stabilities of the bound chlorine on the surfaces are also addressed. Substrates employed include sand, textiles, and paint. Potential uses for the technology are discussed.

Synthesis and antimicrobial applications of 5,5'-ethylenebis[5-methyl-3-(3-triethoxysilylpropyl)hydantoin].

A novel, durable, long lasting, N-halamine siloxane monomer precursor, 5,5'-ethylenebis[5-methyl-3-(3-triethoxysilylpropyl)hydantoin] has been prepared and characterized by (1)H-NMR and FTIR for the purpose of functionalizing the surfaces of various materials. In this work, the precursor N-halamine moiety was attached by siloxane covalent bonding to surfaces of cotton fibers. Simulated laundering tests indicated that the chlorinated N-halamine structure could survive many repeated home launderings. The materials were rendered biocidal after exposure to oxidative halogen solutions, i.e. dilute household bleach. Once chlorinated, these materials were biocidal against Staphylococcus aureus and Escherichia coli. Upon loss of the halogen from either long-term use or consumption by the microbes on the surfaces, they could be simply recharged by further exposure to dilute bleach to regain biocidal activity.