Surgical repair of humeral condylar fractures in New Zealand working farm dogs - long-term outcome and owner satisfaction.

AIM: To report the long-term outcome, return to work and owner satisfaction, for working farm dogs in New Zealand following surgical repair of humeral condylar fractures. METHODS: A retrospective study of working dogs that had undergone surgical repair of one or more condylar fractures of the humerus was undertaken by searching the medical records of two referral veterinary clinics. The inclusion criteria were working dogs that had undergone open surgical reduction and internal fixation of a fracture of one or both humeral condyles. The ability of the dog to work after surgery, persistence of lameness and the owners' degree of satisfaction with the outcome were assessed from answers to a questionnaire. RESULTS: Sixteen dogs met the inclusion criteria and had owner questionnaires completed at a median follow-up interval of 54 (min 3, max 121) months. Fifteen were working farm dogs (13 Heading dogs, including Border Collies, and two New Zealand Huntaways) and one dog was a cross-breed used for pig hunting. Four dogs had two fractures on separate occasions, of which three underwent surgery on both elbows at a median interval of 19 months. Of the 20 humeral fractures, 10 were lateral condylar, one was a medial condylar fracture and nine were dicondylar fractures. Of the 16 repairs with follow-up data, seven (44%) dogs could perform all expected duties following surgical repair, whilst a further eight (50%) could perform most duties although some allowances had to be made for some limitation of their performance. Of the 15 owners responding, 13 (87%) were satisfied or very satisfied with the outcome of surgery and felt the surgery was worth the expense. Post-operative complications requiring a second surgery occurred in 7/20 (35%) dogs, and all six dogs that received appropriate surgical revision returned to work. CONCLUSIONS: In this small case series, surgical repair of humeral condylar fractures in working dogs had a good prognosis with 15/16 of treated dogs returning to full or substantial levels of work. CLINICAL RELEVANCE: These data provide veterinarians with relevant information regarding the outcome and prognosis of surgery for clients whose working dogs have fractured a humeral condyle.

The limits of precision in conventionally instrumented computer-navigated total knee arthroplasty.

PURPOSE: Computer-navigated total knee arthroplasty (TKA) improves the accuracy of component implantation. However, the final implant alignment may not match planned alignment. The hypothesis of this study is that although computer navigation improves alignment, imprecision may not be completely eliminated. The aim of the study was to establish the incidence and sources of imprecision during TKA using computer navigation to measure deviations from planned alignment. METHODS: Computer navigation was used to quantify changes in planned alignment at four steps during 136 TKA's: application of cutting blocks, addition of definitive pin fixation, bone cuts and after prosthesis application. Mean changes in alignment deviation at each step in each plane were measured and the number of significant outliers (>3° from the planned resection plane) were assessed in each plane. RESULTS: Overall changes in planned alignment were small and non-cumulative between steps but the incidence of outliers (cuts measured as >3° from planned alignment at each step) increased through the steps, with 21.3 % (n = 29) of final implants outlying in the tibial sagittal plane, which was the least precise plane. The highest number of outliers occurred after bone resection and the addition of pins to cutting blocks was also identified as a source of imprecision. CONCLUSION: Despite improved accuracy of bone resection with computer-navigated TKA, the precision of bone cuts may be affected at several steps of the procedure. Cutting block application, bone resection and prosthesis application may all affect accuracy. Bone cuts should be made with meticulous care, whether navigated or not, and navigated cuts should be checked and corrected, particularly in the tibial sagittal plane. LEVEL OF EVIDENCE: IV.

Long-term outcomes after partial tarsal arthrodesis in working farm dogs in New Zealand.

AIM: To report the long-term outcome (return to work and owner satisfaction) for working farm dogs in New Zealand after partial tarsal arthrodesis for proximal intertarsal and/or tarsometatarsal tarsal joint injury. METHODS: Working farm dogs that underwent partial tarsal arthrodesis were identified by diagnosis and breed code via a search of the medical records of Massey University Veterinary Teaching Hospital (MUVTH) and Veterinary Specialist Orthopaedic Services (VetSOS). Fourteen dogs fulfilled the selection criteria and were all actively in work on farms at the time of injury. Data from case files were analysed, and the ability of the dog to work after surgery and owners' satisfaction were assessed using a questionnaire sent to owners at a median follow-up interval of 57 months. RESULTS: Following partial tarsal arthrodesis, 7/14 (50%) dogs could perform normal work duties required while 4/14 (29%) dogs could perform most of the duties they had undertaken before injury, though some allowance had to be made for reduced performance. Thirteen owners were satisfied or very satisfied with the outcome of surgery and 12/14 thought the financial investment required for the surgery was worthwhile. Of the three dogs that did not return to work, infection requiring implant removal (one dog) and less than optimal post-operative limb alignment (two dogs) were assessed to contribute to the poor outcome. Two other dogs that required implant removal due to infection did successfully return to work. CONCLUSIONS: In this limited cases series, partial tarsal arthrodesis in working dogs had a good prognosis for return to work. Any conclusion regarding the benefit of a particular surgical technique requires a prospective evaluation with a larger number of animals. It is important to minimise the risk of infection and optimally align the tarsus to avoid a poor outcome. CLINICAL RELEVANCE: New Zealand veterinarians can now provide more accurate prognostic information to owners whose working dogs suffer tarsal trauma requiring partial arthrodesis.

The anatomically difficult primary total hip replacement: medium- to long-term results using a cementless odular stem.

This prospective study presents the ten-year (5 to 16) clinical and radiological results of 55 primary total hip replacements (THR) using a cementless modular femoral component (S-ROM). All patients had a significant anatomical abnormality which rendered the primary THR difficult. The mean Harris hip score was 36 (12 to 72) pre-operatively, 83 (44 to 100) at five years, and 85 (45 to 99) at ten years. The Western Ontario and McMaster Universities osteoarthritis index (WOMAC) and short-form (SF)-12 scores were recorded from the year 2000. The mean SF-12 score at five years after surgery was 45.24 (22.74 to 56.58) for the physical component and 54.14 (29.20 to 66.61) for the mental component. By ten years the SF-12 scores were 42.86 (21.59 to 58.95) and 51.03 (33.78 to 61.40), respectively. The mean WOMAC score at five years post-operatively was 25 (0 to 59), and at ten years was 27 (2 to 70). No femoral components were radiologically loose, although five had osteolysis in Gruen zone 1, three had osteolysis in zone 7, and two showed osteolysis in both zones 1 and 7. No osteolysis was observed around or distal to the prosthetic sleeve. No femoral components were revised, although three hips underwent an acetabular revision and two required a liner exchange. At a mean of ten years' follow-up the S-ROM femoral component implanted for an anatomically difficult primary THR has excellent clinical and radiological results.

Long-term assessment of pancarpal arthrodesis performed on working dogs in New Zealand.

AIM: To determine the outcomes following unilateral pancarpal arthrodesis (PCA) in working dogs in New Zealand, in terms of return to work and ability, as assessed by the owner. METHODS: Working dogs treated using unilateral PCA were identified by searching the medical records of the Massey University Veterinary Teaching Hospital (MUVTH) by diagnosis and breed code. Eight Heading dogs (working Collies) and four New Zealand Huntaways were identified with carpal pathology that had been treated by dorsal-plate application, bone-grafting, and casting. All dogs were actively in work on sheep or cattle farms at the time of injury. Case files and radiographs were retrospectively analysed, and the ability of the dog to work after surgery and owner satisfaction with the outcome were assessed using a questionnaire conducted at a mean follow-up interval of 5 years. RESULTS: Following arthrodesis, 6/12 (50%) dogs could perform duties as before surgery. A further four (33%) dogs could perform most former duties. Ten of the twelve owners were satisfied or very satisfied with resultant mobility and work performance of their dogs. Post-operative complications occurred in 50% of dogs, but in only one case affected the eventual outcome. Eleven owners felt surgical repair was worthwhile in a trained working dog. CONCLUSIONS: Unilateral PCA carries a good prognosis for working dogs in New Zealand to return to work, even on hill-country properties. CLINICAL RELEVANCE: This study may allow veterinarians to provide a more accurate prognosis for working dogs requiring PCA. Working dogs that have sustained severe carpal injury including hyper-extension injury, luxation and fracture, or dogs with crippling carpal osteoarthrosis (OA) can return to work after PCA.

Evaluation of the triple tibial osteotomy. A new technique for the management of the canine cruciate-deficient stifle.

The triple tibial osteotomy (TTO) is a technique which combines the features of tibial tuberosity advancement and wedge osteotomy for the treatment of complete and partial cruciate ligament injuries in dogs. In this paper, the technique is described and the results of a prospective study of 64 consecutive cases are presented. TTO provided a satisfactory clinical outcome in a very high percentage of cases. The technique is relatively easy to learn and has a low post-operative complication rate.

Ability to work and owner satisfaction following surgical repair of common calcanean tendon injuries in working dogs in New Zealand.

AIM: To report the long-term outcome (return to work and owner satisfaction) following surgical treatment of common calcanean tendon (Achilles tendon) injuries in working dogs in New Zealand. METHODS: Ten New Zealand Huntaway or Heading dogs (working Collies) with complete or partial tears of the common calcanean tendon, were treated using locking-loop suturing and casting, with (7) or without (3), a calcaneo-tibial screw. All dogs were actively in work on sheep or cattle farms at the time of injury, and return to work was the desired outcome. Ability to work and owner satisfaction were investigated using a telephone questionnaire at a mean followup interval of 14.6 months. RESULTS: Overall, 7/10 dogs returned to full or substantial levels of work. Post-operative complications occurred in two dogs that did not return to full or substantial levels of work. Moderate persistent lameness (score 3 on a scale of 0-5) was present in 2/7 dogs that returned to full or substantial levels of work, equating to a 71% good-to-excellent functional outcome within this group. Seven owners felt the financial investment in opting for surgical repair was worthwhile. A screw and cast method of rigid immobilisation was thought to be superior to casting alone. CONCLUSIONS: Surgical treatment of common calcanean tendon injury in working dogs carries a good prognosis if an appropriate tenorrhaphy technique is used and rigid immobilisation is achieved for 6 weeks. Care must be taken to limit post-operative complications. CLINICAL RELEVANCE: This study justifies the use of surgical repair of such injuries in the working dog even when return to work is the only acceptable outcome.

In vitro assessment of proximal polyethylene contact surface areas and stresses in mobile bearing knees.

Wear of the polyethylene (PE) insert in total knee arthroplasty remains a significant problem. The generation of biologically active wear particles may ultimately affect implant longevity through osteolysis or premature/catastrophic PE failure. The rate and pattern of wear is influenced by many factors, including component geometry and individual loading conditions, which determine the contact surface area and kinematics of the reconstructed knee. Contact areas and stresses at the proximal femoral-PE insert interface and distal PE-tibial interface contact surface areas were measured in nine mobile bearing total knee designs at 0, 30, 60, 90 and 110 degrees of flexion at 3600 N (5 x body weight) using a standardized test method. Proximal and, to a lesser degree, distal interface contact area footprints decreased significantly with increasing flexion angle based on the conformity of the designs, resulting in a corresponding increase in the mean and peak stresses.

A resorbable porous ceramic composite bone graft substitute in a rabbit metaphyseal defect model.

The success of converted corals as a bone graft substitute relies on a complex sequence of events of vascular ingrowth, differentiation of osteoprogenitor cells, bone remodeling and graft resorption occurring together with host bone ingrowth into and onto the porous coralline microstructure or voids left behind during resorption. This study examined the resorption rates and bone infiltration into a family of resorbable porous ceramic placed bilaterally in critical sized defects in the tibial metaphyseal-diaphyseal of rabbits. The ceramics are made resorbable by partially converting the calcium carbonate of corals to form a hydroxyapatite (HA) layer on all surfaces. Attempts have been made to control the resorption rate of the implant by varying the HA thickness. New bone was observed at the periosteal and endosteal cortices, which flowed into the centre of the defect supporting the osteoconductive nature of partially converted corals. The combination of an HA layer and calcium carbonate core provides a composite bone graft substitute for new tissue integration. The HA-calcium carbonate composite demonstrated an initial resorption of the inner calcium carbonate phase but the overall implant resorption and bone ingrowth behaviour did not differ with HA thickness.

Surgical management of large rotator cuff tears combined with instability in elite rugby football players.

Large rotator cuff tears are extremely uncommon in young people and when they occur they may be associated with shoulder instability. This paper reports on a series of six elite rugby union and rugby league footballers who presented with shoulder instability and large rotator cuff tears. They were treated with a two stage procedure: an open rotator cuff repair followed by an open shoulder stabilisation some 10 weeks later. All had successful outcomes. The paper also highlights the risk of tearing the rotator cuff when a patient continues to play contact sport with an untreated unstable shoulder.

Response of a calcium sulfate bone graft substitute in a confined cancellous defect.

Calcium sulfate, plaster of Paris, has a long clinical history for use as a bone graft substitute in various skeletal sites. The current authors examined the in vivo response of calcium sulfate pellets alone or in combination with autogenous bone graft in a bilateral critical-size distal femoral cancellous defect in an adult sheep model. New thick bone formation was seen in defects filled with calcium sulfate pellets alone. Increased immunostaining for bone morphogenetic protein-2, bone morphogenetic protein-7, transforming growth factor-beta, and platelet derived growth factor was seen in defects filled with calcium sulfate pellets alone and in combination with autograft. The local acidity during calcium sulfate resorption is proposed as a possible in vivo mechanism for this type of material.

Salvaging unstable or recurrent dislocating total hip arthroplasty with the constrained acetabular component.

PURPOSE: To review cases of implantation of constraining acetabular components for unstable or recurrent dislocating total hip arthroplasty at the Department of Orthopaedics, Concord Hospital, Sydney. METHODS: A retrospective analysis was performed on prospectively collected data of 13 consecutively enrolled patients. RESULTS: From 1989 to 2000, 13 constraining acetabular components were implanted into 13 patients as a revision procedure. The surgical approach for the implantation of the constrained liner was posterolateral in 11 cases; a modified Hardinge approach was applied in 2 cases. The mean clinical follow-up duration was 43 months (range, 14-121 months) and the mean age at the time of surgery was 73 years (range, 52-84 years). No patients were lost to follow-up. Indications for using the constrained acetabular component were recurrent dislocation in revision hip replacements (n=8), and intra-operative instability (n=5). There were no episodes of dislocation of the constrained arthroplasty. In 7 cases, the constrained component was implanted into a previously well-fixed shell. CONCLUSION: We recommend the judicious use of the constrained component in cases of hip instability during or after total hip arthroplasty when other methods are not successful.

Total hip arthroplasty for arthrodesed hips.

The benefits of converting an ankylosed or arthrodesed hip to total hip arthroplasty have been reported in the literature as have the technical difficulties associated with this procedure. This review, however, outlines the experience of a single surgeon (WJMB) at a single institution using uncemented prostheses. Between November 1991 and June 1996, 5 arthrodesed hips underwent uncemented total hip arthroplasty in 4 males and 1 female. Clinical and radiological follow-up review was for at least three years in all patients. In general, patients were satisfied with the outcome of their surgery with Harris Hip scores improving from an average of 62 preoperatively to an average of 72 postoperatively. The surgical outcome in these difficult cases was not as satisfactory as for routine total hip arthroplasty. Meticulous preoperative planning is required to aim toward leg length restoration and restoration of the abductor moment arm. A modular prosthesis allows versatility at surgery.

Surface roughness of the proximal and distal bearing surface of mobile bearing total knee prostheses.

Proximal and distal articulations surface roughness measurements were done on 8 mobile bearing knee designs immediately after removal from sterile packaging. Roughness parameters Ra and Rp based on ISO 97, representing mean deviation from the smooth surface line and mean peak to smooth surface line, were recorded using a contact surface profilometer at 10 random sites in the anteroposterior and mediolateral direction on the femoral and tibial metal components and the proximal and distal surface of the ultra-high molecular weight polyethylene (PE) inserts. No differences were found for surface roughness values for the metal components. Surface roughness values were greater for the distal PE bearing surfaces compared with the proximal PE bearing surfaces for each design tested. The roughness values for the PE inserts showed a directional dependence. Complex kinematics of mobile bearing knees coupled with this rougher distal interface could influence the rate of generation of wear particles and total volume of particles produced especially in the early postoperative period.

The influence of design parameters on cortical strain distribution of a cementless titanium femoral stem.

The strain distribution imposed on a femur following a total joint replacement is an important factor, in proximal bone loss due to stress shielding, and long term clinical success. This study investigated how five different design parameters of a cementless titanium femoral prosthesis influenced cortical strains. Test loads were applied and strains were measured with and without an abductor force simulation, using six human cadaveric femora. The cementless design used demonstrated significant calcar loading proximally and a similar strain distribution to the intact femur distally. Implant gross geometry was the major factor in determining the cortical strain distributions under abductor simulation in both axial and torsional loading.

A new technique of subtrochanteric shortening in total hip arthroplasty: surgical technique and results of 9 cases.

Total hip arthroplasty for severe chronic proximal femoral migration, most commonly seen in congenital dislocation of the hip, has been associated with high rates of complications. A new technique of femoral subtrochanteric shortening osteotomy with the prosthesis in situ is described. This technique minimizes the potential complications, allows for correction of severe femoral neck anteversion, and gives excellent rotational stability, while preserving the proximal femur for better press-fit cementless fixation. In this series, there were 9 cases: 6 women and 2 men with a mean age of 53 years (range, 26-77 years). The average follow-up period was 56 months (range, 6-86 months). The mean preoperative Harris Hip Score was 31 (range, 20-35), and the mean postoperative score was 81 (range, 60-98). At follow-up, all patients reported significant pain relief and functional improvement. All osteotomies appeared to be healed on radiographs by 12 weeks. There were 3 complications. The first complication was a recurrent dislocation resulting from muscle incompetence, which was revised using a constrained liner and a 32-mm head with no further dislocations. The second complication was a breach of the femoral shaft, which was treated operatively using a longer stem. The third complication was a proximal femoral shaft split, which was treated by leaving the cerclage wire in situ. This technique should be considered in cases of congenital dislocation of the hip and when femoral shortening is needed.

Exposure in difficult total knee arthroplasty using coronal tibial tubercle osteotomy.

Exposure in a total knee arthroplasty can be challenging regardless of whether it is a difficult primary or a revision. Various techniques both proximal and distal to the patella have been described and implemented to gain exposure and improve knee flexion. When patella eversion is not possible due to previous surgery or severe preoperative knee flexion contracture, a coronal tibial tubercle osteotomy may be utilized. We present successful results utilizing the coronal tibial tubercle osteotomy procedure. The technique involved in this series is based on that described by Whiteside. It involves the development of a long lateral musculoperiosteal flap incorporating the tibial tubercle and anterior tibia, and leaving the proximal tibial cortex intact. This is extended along the tibia distally for 10 cm. It finishes by gradually osteotomising the anterior surface of the tibial crest. The tubercle is reattached with wires at the end of the procedure. This technique minimizes complications that have been associated with the tibial tubercle osteotomy. The 10 knees in 9 patients, who had total knee arthroplasty with a coronal tibial tubercle osteotomy, were reviewed pre and postoperatively. All knees were assessed using the Hospital for Special Surgery knee score (HSS). The scores averaged 43.6 preoperatively (range, 29 57) and 79.2 postoperatively (range, 67 90), and the mean range of motion was 59.5 degrees preoperatively and 78.0 degrees postoperatively. There were no cases of extension lag. Fixed flexion deformity was present in 3 cases postoperatively. Average time to union at the proximal and distal ends of the osteotomy was 8 and 24 weeks respectively. There was no evidence of nonunion and no other significant complications occurred.

Bicipital tendinitis and tenosynovitis in the dog: a study of 15 cases.

AIM: To describe the clinical, radiographic, and sonographic features of 15 dogs with bicipital tendinitis and tenosynovitis, classify them according to cause, and evaluate the long-term efficacy of treatment. METHODS: Dogs exhibiting forelimb lameness with pain localised to the biceps tendon were included in the study. Sonographic examination of the tendon and tendon sheath, and radiographic examination including positive contrast arthrograms of the shoulder joint were performed, and assessed for features consistent with biceps tendon disease. In some cases, synovial-fluid analysis and surgical investigation were also undertaken. The causes of the conditions were classified as either traumatic, mechanical, neoplastic or inflammatory. Dogs were treated conservatively with rest and anti-inflammatory drugs, or surgically by either transection of the transverse humeral ligament or tenodesis of the biceps tendon. Assessment of the effects of treatment was made by re-examination at six weeks and from information gained by telephone interview with the dog's owner at longer-term follow-up. RESULTS: Bicipital tendinitis and tenosynovitis were common causes of forelimb lameness in active, middle-aged or older, medium to large-breed dogs. The most sensitive physical tests for localising pain to the biceps apparatus were shoulder flexion with the elbow extended, focal digital pressure applied directly to the biceps origin, and the biceps retraction test. Sonographic assessment was found to be more sensitive than shoulder radiography or arthrography for characterising the lesion. Conservative treatment of 11 traumatic cases resulted in good or excellent function at long-term follow-up. One mechanical bicipital tendinitis secondary to mineral deposits within the supraspinatus tendon improved following transection of the transverse humeral ligament and removal of the deposits. One of two cases of inflammatory tendinitis/ tenosynovitis improved following tenodesis. One dog with neoplastic disease did not improve and was euthanased. CONCLUSIONS: The diagnosis of bicipital tendinitis and tenosynovitis requires a careful examination using a combination of physical tests. Of the ancillary tests, sonography was the most reliable, however information gained from all tests was useful in fully evaluating the biceps apparatus and shoulder joint. The classification system employed in this study was helpful in selecting a treatment protocol and determining the likely prognosis.