Production and Analysis of the Physicochemical Properties of the Pyrolytic Oil Obtained from Pyrolysis of Different Thermoplastics and Plastic Mixtures.

The constant search for the proper management of non-degradable waste in conjunction with the circular economy makes the thermal pyrolysis of plastics an important technique for obtaining products with industrial interest. The present study aims to produce pyrolytic oil from thermoplastics and their different mixtures in order to determine the best performance between these and different mixtures, as well as to characterize the liquid fraction obtained to analyze its use based on said properties. This was carried out in a batch type reactor at a temperature of 400 °C for both individual plastics and their mixtures, from which the yields of the different fractions are obtained. The liquid fraction of interest is characterized by gas chromatography and its properties are characterized by ASTM standards. The product of the pyrolysis of mixtures of 75% polystyrene and 25% polypropylene presents a yield of 82%, being the highest, with a viscosity of 1.12 cSt and a calorific power of 42.5 MJ/kg, which has a composition of compounds of carbon chains ranging between C6 and C20, for which it is proposed as a good additive agent to conventional fuels for industrial use.

Determination of the Thermodynamic Parameters of the Pyrolysis Process of Post-Consumption Thermoplastics by Non-Isothermal Thermogravimetric Analysis.

Currently, the pyrolysis process is an important technology for the final treatment of plastic waste worldwide. For this reason, knowing in detail the chemical process and the thermodynamics that accompany cracking reactions is of utmost importance. The present study aims to determine the thermodynamic parameters of the degradation process of conventional thermoplastics (polystyrene (PS), polyethylene terephthalate (PET), high-density polyethylene (HDPE), polypropylene (PP) and polyvinyl chloride (PVC)) from the study of their chemical kinetics by thermogravimetric analysis (TG). Non-isothermal thermogravimetry was performed at three heating rates from room temperature to 550 °C with an inert nitrogen atmosphere with a flow of 20 mL min-1. Once the TG data is obtained, an analysis is carried out with the isoconversional models of Friedman (FR), Kissinger-Akahira-Sunose (KAS), and Flynn-Wall-Ozawa (FWO) in order to determine the one that best fits the experimental data, and with this, the calculation of the activation energy and the pre-exponential factor is performed. The validation of the model was carried out using the correlation factor, determining that the KAS model is the one that best adjusts for the post-consumer thermoplastic degradation process at the three heating rates. With the use of the kinetic parameters, the variation of the Gibbs free energy is determined in each of the cases, where it is necessary that for structures containing aromatic groups a lower energy is presented, which implies a relative ease of degradation compared to the linear structures.