Shaping sustainable pathways: Enhancing mechanical properties of biocomposite through tannic acid treatment of flax fabrics.

Biocomposites developed using natural fibers serve as a sustainable alternative to synthetic composite materials. However, narrowing the performance gap between synthetic composites and biocomposites requires serious efforts. A promising approach is the modification of natural fibers using various chemical treatments. This paper investigates the potential of tannic acid (TA) treatment as a sustainable approach to enhance mechanical performance and reduce moisture absorption of flax fabric-reinforced biocomposites. The methodology involves the treatment of flax woven fabric with tannic acid, a naturally occurring polyphenolic compound, followed by the fabrication of biocomposite using a green epoxy matrix. The variables studied during treatment are TA concentration and processing time. Characterization of untreated and treated flax fabric and its composites was done using various analytical techniques such as FTIR spectroscopy, moisture absorption and mechanical testing (tensile strength, flexural strength, and impact resistance). FTIR spectroscopy of TA-treated flax confirmed attachment of aromatic rings and carbon double bond formation, thus serving for properties enhancement. The mechanical characterization of composites showed that properties are enhanced up to an optimum limit of concentration and processing time i.e., 1 % concentration and 30 min of processing. Moisture absorption of the TA-treated composite also reduced significantly as compared to untreated composites. These findings contribute towards the advancement in sustainable biocomposites and pave the way for their utilization in various applications.

Kappa-carrageenan and sodium alginate-based pH-responsive hydrogels for controlled release of methotrexate.

Despite remarkable progress in medical sciences, modern man is still fighting the battle against cancer. In 2022, only in the USA, 640 000 deaths and 2 370 000 patients were reported because of cancer. Chemotherapy is the most widely used for cancer treatments. However, chemotherapeutics have severe physicochemical side effects. Therefore, we have prepared poly(amididoamine) dendrimeric carrageenan (CG), sodium alginate (SA) and poly(vinyl alcohol) (PVA) hydrogels by using solution casting methodology. The constituents of hydrogels were cross-linked by mutable quantity of 3-aminopropyl(diethoxy)methyl silane (APDMS). Hydrogels were characterized by Fourier transform infrared spectroscopy, thermal gravimetric analysis, scanning electron microscope and atomic force microscopy. Hydrogels exhibited higher swelling volumes in 5-7 pH range. In vitro biodegradation in ribonuclease-A solution and cytocompatibility analysis against DF-1 fibroblasts established their biodegradable and non-toxic nature, which enables them as a suitable carrier for chemotherapeutic compounds. Hence, methotrexate (MTX) as a model drug was loaded on CAP-8 hydrogel and its release was detected by the UV-visible spectrophotometer in phosphate-buffered saline (PBS) solution. In 13.5 h, 81.25% and 77.23% of MTX were released at pH 7.4 (blood pH) and 5.3 (tumour pH) in PBS, respectively. MTX was released by super case II mechanism and best fitted to zero-order and Korsmeyer-Peppas model. The synthesized APDMS cross-linked CG/SA/PVA dendrimeric hydrogels could be an efficient model platform for the effective delivery of MTX in cancer treatments.

Influence of Zinc Substitution on the Structural, Dielectric, and Gas-Sensing Properties of Mg1-xZnxFe2O4 Nanoparticles.

In the present work, Mg1-xZnxFe2O4 (MZFO) nanoparticles with x = 0.0, 0.2, 0.35, and 0.5 were synthesized via a chemical coprecipitation method. The study aimed to explore the effect of substituting Mg with Zn in MZFO on its structural, dielectric, and gas-sensing properties. The spinel phase formation was confirmed using X-ray diffraction, and the morphology of the prepared nanoparticles was revealed using scanning electron microscopy. Fourier transform infrared spectroscopy (FTIR) analysis confirmed the band ranges of 500-600 cm-1 for tetrahedral and 390-450 cm-1 for octahedral lattice sites. The dielectric data showed that Zn substitution in MZFO decreased both the dielectric constant and loss with increasing frequencies and attained a stagnant value at higher frequencies. Furthermore, the gas-sensing characteristics of Zn-substituted spinel ferrites at room temperature for CO2, O2, and N2 were studied. The nanostructured MZFO exhibited high sensitivity in the order of CO2 > O2 ≫ N2 and showed a good response time of (∼1 min) for CO2, demonstrating that MZFO can be a good potential candidate for gas-sensing applications.

Synthesis and Characterization of Cobalt-Doped Ferrites for Biomedical Applications.

Novel materials for biomedical applications are in critical need of time. In the present work, the antibacterial properties of Co1-x Ni x Mg x Fe2O4 nanoparticles (NPs) are assessed by the disc diffusion method for the common pathogen, that is, Gram-negative (Escherichia coli and Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus) bacteria. Overnight grown bacterial cultures were individually lawn-cultured on nutrient agar plates. All samples of NP concentrations (2 mg/mL) were prepared in sterile water and dispensed by sonication. Sterile filter paper discs (1.0 mm) were saturated by the (doped CoFe2O4) NP solution and incubated at 37 ± 0.1 °C for 24 h. The NPs with a fine size of 30-70 nm of Co1-x Ni x Mg x Fe2O4 were achieved using the sol-gel method by doping CoFe2O4 initially with Ni and codoping with Mg, and their properties were studied by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Fourier transform infrared techniques. According to the results, Co0.5Ni0.25Mg0.25Fe2O4 NPs exhibited potent antibacterial activities against s. aureus having an inhibition zone of 6.5 mm and P. aeruginosa having an inhibition zone of 6 mm as that were examined. The result shows that the bacteriostatic properties of NPs are used for numerous applications such as hyperthermia, antibacterial treatments, and targeted drug delivery.

In Situ Synthesis of a Polyaniline/ Fe-Ni Codoped Co3O4 Composite for the Electrode Material of Supercapacitors with Improved Cyclic Stability.

Conductive polymers have become a remarkable candidate for electrode materials of supercapacitors. Polyaniline (PANI) is the most promising contender for supercapacitors because of its easy method of synthesis, low cost, and higher choice in the improvement of energy storage applications. The main issue in the use of PANI in supercapacitors is its lower stability. In this work, PANI@Fe-Ni codoped Co3O4 (PANI@FNCO) nanocomposite has been prepared by in situ addition of 10 wt % FNCO as fillers in the PANI matrix. The nanocomposites were then characterized via scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry to observe the morphology, crystal structure, functional groups, and thermal stability of samples, respectively. SEM results showed that FNCO was fairly dispersed in the PANI matrix, while XRD results showed a broad peak for nanocomposites because of the semicrystalline nature of polymers. The electrochemical properties of the samples were analyzed via cyclic voltammetry, galvanostatic charge and discharge, and electrochemical impedance spectroscopy. PANI@FNCO nanowires are found to overcome the shortcomings in electrochemical energy storage devices by exhibiting a higher value of specific capacitance of 1171 F g-1 and energy density of 144 W h kg-1 at a current density of 1 A g-1. Moreover, the FNCO nanowires also showed a cyclic charge/discharge stability of 84% for 2000 cycles.

Revealing the Effects of Microarc Oxidation on the Mechanical and Degradation Properties of Mg-Based Biodegradable Composites.

To overcome the inherent weakness of polylactic acid (PLA), used as scaffolding materials, multiple samples of Mg/PLA alloy composite materials was made by plastic injection molding. To enhance the interfacial interaction with PLA, magnesium alloy was treated with microarc oxidation (MAO) at four different frequencies, resulting in an improvement in mechanical strength and toughness. The microarc oxidation films consisted mainly of a porous MgO ceramic layer on the Mg rod. Based on the phenomenon of micro-anchoring and electrostatic interaction, a change in frequency during MAO showed considerable improvements in the ductility of the composite materials. The presence of the ceramic layer enriched the interfacial bonding between the Mg rod and outer PLA cladding, resulting in the PLA-clad Mg rod showing a higher tensile strength. In vitro degradation test was carried out in Hank's solution for different time periods. Surface-treated Mg alloy-based composite samples displayed a lower degradation rate as compared to untreated Mg alloy samples. The surface-treated sample at a 800 Hz pulse frequency showed the best degradation resistance and mechanical properties after being immersed in Hank's solution as compared to other samples. Mg-reinforced PLA composite rods are promising candidates for orthopedic implants.

Mechanical and degradation properties of biodegradable Mg strengthened poly-lactic acid composite through plastic injection molding.

Full biodegradable magnesium alloy (AZ31) strengthened poly-lactic acid (PLA) composite rods for potential application for bone fracture fixation were prepared by plastic injection process in this work. Their surface/interfacial morphologies, mechanical properties and vitro degradation were studied. In comparison with untreated Mg rod, porous MgO ceramic coating on Mg surface formed by Anodizing (AO) and micro-arc-oxidation (MAO)treatment can significantly improve the interfacial binding between outer PLA cladding and inner Mg rod due to the micro-anchoring action, leading to better mechanical properties and degradation performance of the composite rods.With prolonging immersion time in simulated body fluid (SBF) solution until 8weeks, the MgO porous coating were corroded gradually, along with the disappearance of original pores and the formation of a relatively smooth surface. This resulted in a rapidly reduction in mechanical properties for corresponding composite rods owing to the weakening of interfacial binding capacity. The present results indicated that this new PLA-clad Mg composite rods show good potential biomedical applications for implants and instruments of orthopedic inner fixation.