Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 48
Filtrar
Más filtros










Base de datos
Intervalo de año de publicación
1.
Biomacromolecules ; 24(8): 3619-3628, 2023 08 14.
Artículo en Inglés | MEDLINE | ID: mdl-37526635

RESUMEN

Using small-angle neutron scattering (SANS), we examine the structure and conformational behavior of wheat arabinoxylan (AX) prepared at various concentrations in a sodium phosphate aqueous buffer. As for another major hemicellulose, xyloglucan, we observe a small number of large clusters surrounded by AX chains that behave exactly as a polymer in good solvent with a Flory exponent ν = 0.588. The fit of the data at high q-values to a standard worm-like chain model gives the persistence length lp = 45 Å and cross section of the chains 2Rc = 11-12 Å. In addition, using a dedicated modeling approach, we extract from the SANS data at the intermediate q-range the correlation length ξ of the solutions in the semidilute regime. The decay of ξ with concentration follows a scaling law that further confirms the self-avoiding statistical behavior of the AX chains. This first comprehensive study about the properties of water-soluble AX at different length scales may help in the development of products and processes involving AX as a substitute for fossil carbon molecules.


Asunto(s)
Agua , Agua/química , Conformación Molecular , Dispersión del Ángulo Pequeño , Análisis por Conglomerados
2.
Langmuir ; 37(42): 12278-12289, 2021 10 26.
Artículo en Inglés | MEDLINE | ID: mdl-34636247

RESUMEN

The formation of dense protein interfacial layers at a free air-water interface is known to result from both diffusion and advection. Furthermore, protein interactions in concentrated phases are strongly dependent on their overall positive or negative net charge, which is controlled by the solution pH. As a consequence, an interesting question is whether the presence of an advection flow of water toward the interface during protein adsorption produces different kinetics and interfacial structure of the adsorbed layer, depending on the net charge of the involved proteins and, possibly, on the sign of this charge. Here we test a combination of the following parameters using ovalbumin and lysozyme as model proteins: positive or negative net charge and the presence or absence of advection flow. The formation and the organization of the interfacial layers are studied by neutron reflectivity and null-ellipsometry measurements. We show that the combined effect of a positive charge of lysozyme and ovalbumin and the presence of advection flow does induce the formation of interfacial multilayers. Conversely, negatively charged ovalbumin forms monolayers, whether advection flow is present or not. We show that an advection/diffusion model cannot correctly describe the adsorption kinetics of multilayers, even in the hypothesis of a concentration-dependent diffusion coefficient as in colloidal filtration, for instance. Still, it is clear that advection is a necessary condition for making multilayers through a mechanism that remains to be determined, which paves the way for future research.


Asunto(s)
Aire , Agua , Adsorción , Cinética , Transporte de Proteínas , Propiedades de Superficie
3.
Soft Matter ; 17(35): 8022-8026, 2021 Sep 15.
Artículo en Inglés | MEDLINE | ID: mdl-34525157

RESUMEN

Are aluminium ions unavoidable in antiperspirants? To answer this question, we present confocal microscopy images of dendritic plugs appearing in sweat flowing across a microfluidic channel in the presence of aluminium salts. By comparing with numerical simulations, we identify the mechanisms forming this structured protein gel inside the pore.


Asunto(s)
Aluminio , Sudor , Antitranspirantes , Sales (Química) , Sudoración
4.
Sci Rep ; 11(1): 6376, 2021 03 18.
Artículo en Inglés | MEDLINE | ID: mdl-33737654

RESUMEN

Aluminium salts such as aluminium chlorohydrate (ACH) are the active ingredients of antiperspirant products. Their mechanism of action involves a temporary and superficial plugging of eccrine sweat pores at the skin surface. We developed a microfluidic system that allows the real time observation of the interactions between sweat and ACH in conditions mimicking physiological sweat flow and pore dimensions. Using artificial sweat containing bovine serum albumin as a model protein, we performed experiments under flowing conditions to demonstrate that pore clogging results from the aggregation of proteins by aluminium polycations at specific location in the sweat pore. Combining microfluidic experiments, confocal microscopy and numerical models helps to better understand the physical chemistry and mechanisms involved in pore plugging. The results show that plugging starts from the walls of sweat pores before expanding into the centre of the channel. The simulations aid in explaining the influence of ACH concentration as well as the impact of flow conditions on the localization of the plug. Altogether, these results outline the potential of both microfluidic confocal observations and numerical simulations at the single sweat pore level to understand why aluminium polycations are so efficient for sweat channel plugging.

5.
Langmuir ; 36(42): 12607-12619, 2020 Oct 27.
Artículo en Inglés | MEDLINE | ID: mdl-33044083

RESUMEN

The removal of ultrathin amorphous polymer films in contact with an aqueous gelled solution containing small amounts of good solvent is addressed by means of specular and off-specular neutron reflectometry. The distribution of heavy water and benzyl alcohol is revealed inside Laropal A81, often employed as a protective varnish layer for Culture Heritage in the restoration of easel paintings. The swelling kinetics, interface roughness, and film morphologies were recorded as a function of temperature and increasing benzyl alcohol concentration in the dispersion of Pemulen TR-2, a hydrophobically modified acrylic acid copolymer. The addition of small amounts of good solvent results in the appearance of water-filled cavities inside the varnish, which grow with time. It is shown that while increasing the solvent concentration greatly enhances the hole growth kinetics, an increase in temperature above the glass transition temperature does not have such a big effect on the kinetics.

6.
Soft Matter ; 16(10): 2426-2430, 2020 Mar 11.
Artículo en Inglés | MEDLINE | ID: mdl-32100781

RESUMEN

We have discovered the existence of polydisperse high internal-phase-ratio emulsions (HIPE) in which the internal-phase droplets, present at 95% volume fraction, remain spherical and organise themselves according to Apollonian packing rules. These polydisperse HIPEs are formed by emulsifying oil dropwise in a surfactant-poor aqueous continuous phase. After stirring has ceased, their droplet size distributions begin to evolve spontaneously and continuously through coalescence towards well-defined power laws with the Apollonian exponent. Small-angle X-ray Scattering performed on aged HIPEs demonstrate that the droplet packing structure agrees with that of a numerically simulated random Apollonian packing. We argue that when such concentrated emulsions are allowed to evolve, the coalescing droplets must obey volume and sphericity conservation. This leads to a mechanism that differs from typical coalescence in dilute emulsions.

7.
Phys Rev Lett ; 124(5): 058003, 2020 Feb 07.
Artículo en Inglés | MEDLINE | ID: mdl-32083896

RESUMEN

Monte Carlo simulations, fully constrained by experimental parameters, are found to agree well with a measured phase diagram of aqueous dispersions of nanoparticles with a moderate size polydispersity over a broad range of salt concentrations, c_{s}, and volume fractions, ϕ. Upon increasing ϕ, the colloids freeze first into coexisting compact solids then into a body centered cubic phase (bcc) before they melt into a glass forming liquid. The surprising stability of the bcc solid at high ϕ and c_{s} is explained by the interaction (charge) polydispersity and vibrational entropy.

8.
Soft Matter ; 16(6): 1485-1497, 2020 Feb 12.
Artículo en Inglés | MEDLINE | ID: mdl-31930258

RESUMEN

The removal of ultrathin amorphous polymer films in contact with nonsolvent/solvent binary mixtures is addressed by means of neutron reflectometry and atomic force microscopy. The high resolution of neutron scattering makes it possible to resolve the distribution profiles of heavy water and benzyl alcohol inside Laropal®A81, often employed as a protective varnish layer for Culture Heritage in restoration of easel paintings. The swelling kinetics and distribution profiles were recorded as a function of time and increasing benzyl alcohol concentration in water. The varnish film swells by penetration of the good solvent. At higher concentrations water-filled cavities appear inside the varnish and grow with time. Contrary to homogeneous dissolution dewetting is observed at late stages of exposure to the liquid which leads to the Breakup of the film. The high resolution measurements are compared to bulk behaviour characterized by the ternary phase diagram and the Flory-Huggins interaction parameters are calculated and used to predict the swelling and solvent partition in the films. Distinct differences of the thin film to bulk behaviour are found. The expectations made previously for the behaviour of solvent/non-solvent mixtures on the removal of thin layers in the restoration of easel paintings should be revised in view of surface interactions.

9.
Soft Matter ; 14(28): 5832-5846, 2018 Jul 18.
Artículo en Inglés | MEDLINE | ID: mdl-29989128

RESUMEN

The osmotic pressure of polyelectrolyte solutions as a function of concentration has been calculated by Monte Carlo simulations of a spherical cell model and by molecular dynamics simulations with periodic boundary conditions. The results for the coarse-grained polyelectrolyte model are in good agreement with experimental results for sodium polyacrylate and the cell model is validated by the bulk simulations. The cell model offers an alternative perspective on osmotic pressure and also forms a direct link to even simpler models in the form of the Poisson-Boltzmann approximation applied to cylindrical and spherical geometries. As a result, the non-monotonic behaviour of the osmotic coefficient seen in simulated salt-free solutions is shown not to rely on a transition between a dilute and semi-dilute regime, as is often suggested when the polyion is modelled as a linear flexible chain. The non-monotonic behaviour is better described as the combination of a finite-size effect and a double-layer effect. Parameters that represent the linear nature of the polyion, including an alternative to monomer concentration, make it possible to display a generalised behaviour of equivalent chains, at least at low concentrations. At high concentrations, local interactions become significant and the exact details of the model become important. The effects of added salt are also discussed and one conclusion is that the empirical additivity rule, treating the contributions from the polyelectrolyte and any salt separately, is a reasonable approximation, which justifies the study of salt-free solutions.

10.
Soft Matter ; 13(20): 3812-3821, 2017 May 24.
Artículo en Inglés | MEDLINE | ID: mdl-28485735

RESUMEN

Aluminium salts are widely used to control sweating for personal hygiene purposes. Their mechanism of action as antiperspirants was previously thought to be a superficial plugging of eccrine sweat pores by the aluminium hydroxide gel. Here we present a microfluidic T junction device that mimics sweat ducts, and is designed for the real time study of interactions between sweat and ACH (Aluminium Chloro Hydrate) under conditions that lead to plug formation. We used this device to image and measure the diffusion of aluminium polycationic species in sweat counter flow. We report the results of small angle X-ray scattering experiments performed to determine the structure and composition of the plug, using BSA (Bovine Serum Albumin) as a model of sweat proteins. Our results show that pore occlusion occurs as a result of the aggregation of sweat proteins by aluminium polycations. Mapping of the device shows that this aggregation is initiated in the T junction at the location where the flow of aluminium polycations joins the flow of BSA. The mechanism involves two stages: (1) a nucleation stage in which aggregates of protein and polycations bind to the wall of the sweat duct and form a tenuous membrane, which extends across the junction; (2) a growth stage in which this membrane collects proteins that are carried by hydrodynamic flow in the sweat channel and polycations that diffuse into this channel. These results could open up perspectives to find new antiperspirant agents with an improved efficacy.

11.
Langmuir ; 33(19): 4709-4719, 2017 05 16.
Artículo en Inglés | MEDLINE | ID: mdl-28453278

RESUMEN

We report on the impact of surface hydrophobization on the structure of aqueous silica dispersions and how this structure resists drying stress. Hydrophilic silica particles were hydrophobized directly in water using a range of organosilane precursors, with a precise control of the grafting density. The resulting nanostructure was precisely analyzed by a combination of small-angle X-ray scattering (SAXS) and cryo-microscopy (cryo-TEM). Then, the dispersion was progressively concentrated by drying, and the evolution of the nanostructures as a function of the grafting density was followed by SAXS. At the fundamental level, because the hydrophobic character of the silica surfaces could be varied continuously through a precise control of the grafting density, we were able to observe how the hydrophobic interactions change particles interactions and aggregates structures. Practically, this opened a new route to tailor the final structure, the residual porosity, and the damp-proof properties of the fully dried silica. For example, regardless of the nature of the hydrophobic precursor, a grafting density of 1 grafter per nm2 optimized the interparticle interactions in solution in view to maximize the residual porosity in the dried material (0.9 cm3/g) and reduced the water uptake to less than 4% in weight compared to the typical value of 13% for hydrophilic particles (at T = 25 °C and relative humidity = 80%).

12.
Phys Chem Chem Phys ; 18(41): 28458-28465, 2016 Oct 19.
Artículo en Inglés | MEDLINE | ID: mdl-27722380

RESUMEN

We obtained osmotic pressure data of lysozyme solutions, describing their physical states over a wide concentration range, using osmotic stress for pressures between 0.05 bar and about 40 bar and volume fractions between 0.01 and 0.61. The osmotic pressure vs. volume fraction data consist of a dilute, gas-phase regime, a transition regime with a high-compressibility plateau, and a concentrated regime where the system is nearly incompressible. The first two regimes are shifted towards a higher protein volume fraction upon decreasing the strength or the range of electrostatic interactions. We describe this shift and the overall shape of the experimental data in these two regimes through a model accounting for a steric repulsion, a short-range van der Waals attraction and a screened electrostatic repulsion. The transition is caused by crystallization, as shown by small-angle X-ray scattering. We verified that our data points correspond to thermodynamic equilibria, and thus that they consist of the reference experimental counterpart of a thermodynamic equation of state.

13.
Phys Rev Lett ; 116(20): 208001, 2016 May 20.
Artículo en Inglés | MEDLINE | ID: mdl-27258885

RESUMEN

We report small-angle x-ray scattering experiments on aqueous dispersions of colloidal silica with a broad monomodal size distribution (polydispersity, 14%; size, 8 nm). Over a range of volume fractions, the silica particles segregate to build first one, then two distinct sets of colloidal crystals. These dispersions thus demonstrate fractional crystallization and multiple-phase (bcc, Laves AB_{2}, liquid) coexistence. Their remarkable ability to build complex crystal structures from a polydisperse population originates from the intermediate-range nature of interparticle forces, and it suggests routes for designing self-assembling colloidal crystals from the bottom up.

14.
Proteins ; 84(6): 777-91, 2016 06.
Artículo en Inglés | MEDLINE | ID: mdl-26914439

RESUMEN

Monte Carlo simulations and coarse-grained modeling have been used to analyze Histatin 5, an unstructured short cationic salivary peptide known to have anticandidical properties. The calculated scattering functions have been compared with intensity curves and the distance distribution function P(r) obtained from small angle X-ray scattering (SAXS), at both high and low salt concentrations. The aim was to achieve a molecular understanding and a physico-chemical insight of the obtained SAXS results and to gain information of the conformational changes of Histatin 5 due to altering salt content, charge distribution, and net charge. From a modeling perspective, the accuracy of the electrostatic interactions are of special interest. The used coarse-grained model was based on the primitive model in which charged hard spheres differing in charge and in size represent the ionic particles, and the solvent only enters the model through its relative permittivity. The Hamiltonian of the model comprises three different contributions: (i) excluded volumes, (ii) electrostatic, and (iii) van der Waals interactions. Even though the model can be considered as gross omitting all atomistic details, a great correspondence is obtained with the experimental results. Proteins 2016; 84:777-791. © 2016 Wiley Periodicals, Inc.


Asunto(s)
Histatinas/química , Proteínas Intrínsecamente Desordenadas/química , Simulación por Computador , Humanos , Modelos Biológicos , Método de Montecarlo , Concentración Osmolar , Conformación Proteica , Dispersión del Ángulo Pequeño , Electricidad Estática , Difracción de Rayos X
15.
Faraday Discuss ; 186: 229-40, 2016.
Artículo en Inglés | MEDLINE | ID: mdl-26761364

RESUMEN

A modified version of the Gibbs-ensemble Monte-Carlo method reveals how polydisperse charged colloidal particles can build complex colloidal crystals. It provides general rules that are applicable to this fractionated crystallization that stems from size segregation. It explains the spontaneous formation of complex crystals with very large unit-cells in suspensions of nanoparticles with a broad size distribution.

16.
Soft Matter ; 11(2): 389-99, 2015 Jan 14.
Artículo en Inglés | MEDLINE | ID: mdl-25388767

RESUMEN

We examine the internal structure of milk casein micelles using the contrast variation method in Small-Angle Neutron Scattering (SANS). Experiments were performed with casein dispersions of different origins (i.e., milk powder or fresh milk) and extended to very low q-values (∼9 × 10(-4) Å(-1)), thus making it possible to precisely determine the apparent gyration radius Rg at each contrast. From the variation of I(q → 0) with contrast, we determine the distribution of composition of all the particles in the dispersions. As expected, most of these particles are micelles, made of casein and calcium phosphate, with a narrow distribution in compositions. These micelles always coexist with a very small fraction of fat droplets, with sizes in the range of 20-400 nm. For the dispersions prepared from fresh milk, which were purified under particularly stringent conditions, the number ratio of fat droplets to casein micelles is as low as 1 to 10(6). In that case, we are able to subtract from the total intensity the contribution of the fat droplets and in this way obtain the contribution of the micelles only. We then analyze the variation of this contribution with contrast using the approach pioneered by H. B. Stuhrmann. We model the casein micelle as a core-shell spherical object, in which the local scattering length density is determined by the ratio of calcium phosphate nanoclusters to proteins. We find that models in which the shell has a lower concentration of calcium phosphate than the core give a better agreement than models in which the shell has a higher density than the core.


Asunto(s)
Caseínas/química , Leche/química , Animales , Bovinos , Micelas , Dispersión del Ángulo Pequeño
17.
Angew Chem Int Ed Engl ; 54(5): 1452-5, 2015 Jan 26.
Artículo en Inglés | MEDLINE | ID: mdl-25504340

RESUMEN

Two coarsening mechanisms of emulsions are well established: droplet coalescence (fusion of two droplets) and Ostwald ripening (molecular exchange through the continuous phase). Here a third mechanism is identified, contact ripening, which operates through molecular exchange upon droplets collisions. A contrast manipulated small-angle neutron scattering experiment was performed to isolate contact ripening from coalescence and Ostwald ripening. A kinetic study was conducted, using dynamic light scattering and monodisperse nanoemulsions, to obtain the exchange key parameters. Decreasing the concentration or adding ionic repulsions between droplets hinders contact ripening by decreasing the collision frequency. Using long surfactant chains and well-hydrated heads inhibits contact ripening by hindering fluctuations in the film. Contact ripening can be controlled by these parameters, which is essential for both emulsion formulation and delivery of hydrophobic ingredients.

18.
Soft Matter ; 11(4): 806, 2015 Jan 28.
Artículo en Inglés | MEDLINE | ID: mdl-25514249

RESUMEN

Correction for 'Structural heterogeneity of milk casein micelles: a SANS contrast variation study' by Antoine Bouchoux et al., Soft Matter, 2015, DOI: 10.1039/c4sm01705f.

19.
Langmuir ; 29(36): 11244-50, 2013 Sep 10.
Artículo en Inglés | MEDLINE | ID: mdl-23844840

RESUMEN

Polymer particles, containing macromolecules made by the polymerization of nonionic monomers, can be ionized in water thanks to the end-groups of the macromolecules. We show that poly(methylmethacrylate) particles with ionic end-groups can acquire colloidal properties such as dispersion metastability and electrokinetic mobility. We demonstrate that the variation of these colloidal properties according to solution pH is uniquely determined by the chemical nature of the end-groups and therefore by the nature of the initiator used in the polymerization reaction. We compare polymer dispersions in which the polymer particles were made by different processes (e.g., surfactant-free emulsion polymerization or precipitation of the macromolecules induced by solvent shifting). For each colloidal dispersion, we determine the number of end-groups that are actually located at the surfaces of the particles, and we show that this number is a trace of the process by which the macromolecules were self-assembled into colloidal particles. We propose that it is possible to recover mechanistic details of this self-assembly process through measurements of the distribution of end-groups within the particles.

20.
Langmuir ; 29(19): 5689-700, 2013 May 14.
Artículo en Inglés | MEDLINE | ID: mdl-23570451

RESUMEN

Populations of droplets or particles dispersed in a liquid may evolve through Brownian collisions, aggregation, and coalescence. We have found a set of conditions under which these populations evolve spontaneously toward a narrow size distribution. The experimental system consists of poly(methyl methacrylate) (PMMA) nanodroplets dispersed in a solvent (acetone) + nonsolvent (water) mixture. These droplets carry electrical charges, located on the ionic end groups of the macromolecules. We used time-resolved small angle X-ray scattering to determine their size distribution. We find that the droplets grow through coalescence events: the average radius (R) increases logarithmically with elapsed time while the relative width σR/(R) of the distribution decreases as the inverse square root of (R). We interpret this evolution as resulting from coalescence events that are hindered by ionic repulsions between droplets. We generalize this evolution through a simulation of the Smoluchowski kinetic equation, with a kernel that takes into account the interactions between droplets. In the case of vanishing or attractive interactions, all droplet encounters lead to coalescence. The corresponding kernel leads to the well-known "self-preserving" particle distribution of the coalescence process, where σR/(R) increases to a plateau value. However, for droplets that interact through long-range ionic repulsions, "large + small" droplet encounters are more successful at coalescence than "large + large" encounters. We show that the corresponding kernel leads to a particular scaling of the droplet-size distribution-known as the "second-scaling law" in the theory of critical phenomena, where σR/(R) decreases as 1/√(R) and becomes independent of the initial distribution. We argue that this scaling explains the narrow size distributions of colloidal dispersions that have been synthesized through aggregation processes.


Asunto(s)
Nanoestructuras/química , Polimetil Metacrilato/química , Acetona/química , Coloides/química , Tamaño de la Partícula , Propiedades de Superficie , Agua/química
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA