Exploring the potential of novel biomixtures and Lentinula edodes fungus for the degradation of selected pesticides. Evaluation for use in biobed systems.

An approach to reduce the contamination of water sources with pesticides is the use of biopurificaction systems. The active core of these systems is the biomixture. The composition of biomixtures depends on the availability of local agro-industrial wastes and design should be adapted to every region. In Portugal, cork processing is generally regarded as environmentally friendly and would be interesting to find applications for its industry residues. In this work the potential use of different substrates in biomixtures, as cork (CBX); cork and straw, coat pine and LECA (Light Expanded Clay Aggregates), was tested on the degradation of terbuthylazine, difenoconazole, diflufenican and pendimethalin pesticides. Bioaugmentation strategies using the white-rot fungus Lentinula edodes inoculated into the CBX, was also assessed. The results obtained from this study clearly demonstrated the relevance of using natural biosorbents as cork residues to increase the capacity of pesticide dissipation in biomixtures for establishing biobeds. Furthermore, higher degradation of all the pesticides was achieved by use of bioaugmented biomixtures. Indeed, the biomixtures inoculated with L. edodes EL1 were able to mineralize the selected xenobiotics, revelling that these white-rot fungi might be a suitable fungus for being used as inoculum sources in on-farm sustainable biopurification system, in order to increase its degradation efficiency. After 120 days, maximum degradation of terbuthylazine, difenoconazole, diflufenican and pendimethalin, of bioaugmented CBX, was 89.9%, 75.0%, 65.0% and 99.4%, respectively.. The dominant metabolic route of terbuthylazine in biomixtures inoculated with L. edodes EL1 proceeded mainly via hydroxylation, towards production of terbuthylazine-hydroxy-2 metabolite. Finally, sorption process to cork by pesticides proved to be a reversible process, working cork as a mitigating factor reducing the toxicity to microorganisms in the biomixture, especially in the early stages.

Microbial communities analysis assessed by pyrosequencing--a new approach applied to conservation state studies of mural paintings.

The knowledge about the microbial communities present in mural paintings is of utmost importance to develop effective conservation and mitigation strategies. The present paper describes a methodological approach for the detailed characterisation of microorganisms thriving in mural paintings by combining culture-dependent methods that allow the identification of microorganisms capable of growing in the laboratory conditions and to obtain high cell densities for further studies, and culture independent methods, such as denaturing gradient gel electrophoresis (DGGE) and pyrosequencing. The coupled use of culture-dependent methods and DGGE does not give enough information to investigate the diversity and abundance of microorganisms present in wall paintings. Pyrosequencing, a novel molecular technique, used here for the first time in this area of research, allowed the identification of a large number of microorganisms, confirming some already identified by the cultivation-dependent methods such as fungi of the genera Penicillium and Cladosporium, but also providing a great contribution in the identification of several genera and species, not previously identified in these artworks, giving also a detailed overview of contaminants which was not possible with the other approaches. The results obtained on several mural painting samples show a strong relationship between the most deteriorated areas of the paintings and higher microbial contamination.

Degradation of terbuthylazine, difenoconazole and pendimethalin pesticides by selected fungi cultures.

Contamination of waters by xenobiotic compounds such as pesticides presents a serious environmental problem with substantial levels of pesticides now contaminating European water resources. The aim of this work was to evaluate the ability of the fungi Fusarium oxysporum, Aspergillus oryzae, Lentinula edodes, Penicillium brevicompactum and Lecanicillium saksenae, for the biodegradation of the pesticides terbuthylazine, difenoconazole and pendimethalin in batch liquid cultures. These pesticides are common soil and water contaminants and terbuthylazine is considered the most persistent triazine herbicide in surface environments. P. brevicompactum and L. saksenae were achieved by enrichment, isolation and screening of fungi capable to metabolize the pesticides studied. The isolates were obtained from two pesticide-primed materials (soil and biomixture). Despite the relatively high persistence of terbuthylazine, the results obtained in this work showed that the fungi species studied have a high capability of biotransformation of this xenobiotic, comparatively the results obtained in other similar studies. The highest removal percentage of terbuthylazine from liquid medium was achieved with A. oryzae (~80%), although the major biodegradation has been reached with P. brevicompactum. The higher ability of P. brevicompactum to metabolize terbuthylazine was presumably acquired through chronic exposure to contamination with the herbicide. L. saksenae could remove 99.5% of the available pendimethalin in batch liquid cultures. L. edodes proved to be a fungus with a high potential for biodegradation of pesticides, especially difenoconazole and pendimethalin. Furthermore, the metabolite desethyl-terbuthylazine was detected in L. edodes liquid culture medium, indicating terbuthylazine biodegradation by this fungus. The fungi strains investigated could prove to be valuable as active pesticide-degrading microorganisms, increasing the efficiency of biopurification systems containing wastewaters contaminated with the xenobiotics studied or compounds with similar intrinsic characteristics.

Environmental dynamics of Bacillus amyloliquefaciens CCMI 1051 antifungal activity under different nitrogen patterns.

AIMS: The aim of this study was to evaluate the influence of environmental conditions on the antifungal activity of the Bacillus sp. CCMI 1053 cultures. METHODS AND RESULTS: The electrospray ionization mass spectra (ESI-MS) analysis was used to detect the active peptides produced by Bacillus amyloliquefaciens CCMI 1051 cultures in a glucose-containing medium to which four different nitrogen sources were added. The cultures produced different patterns of Bacillus sporulation and distinct antifungal activity of the cell-free culture broths. CONCLUSIONS: The highest sporulation obtained corresponds to higher antifungal activity when it is formed after 3 days of microbial growth. The antifungal activity against Trichoderma harzianum CCMI 783 is more influenced by the concentration on the nitrogen source than the culture time of incubation. The association of nitrogen concentration and the time of incubation is particularly relevant in the expression of the antifungal activity. SIGNIFICANCE AND IMPACT OF THE STUDY: The present findings allow the reduction of the use of chemical pesticides and to limit some plant diseases. The association of the nitrogen source and the time of incubation is a novelty, which would improve the production of secondary metabolites. Both economical and environmental benefits arise from the study.

Polysaccharide synthesis as a carbon dissipation mechanism in metabolically uncoupled Xanthomonas campestris cells.

The utilization of xanthan metabolism as an excess carbon dissipation path in Xanthomonas campestris cells under sub-lethal acid stress was studied. To highlight growth limitation during metabolic uncoupling due to acid toxicity a antibiotic was added. The simultaneous addition of enoxacin and acetic acid showed that the xanthan production per unit of biomass raises with increasing concentrations of enoxacin, which seems to indicate that when the cell is prevented from growing it finds a path to convey the extra carbon. In parallel, although the effect of acetic acid is not very significant, its presence appears to increase xanthan. This tendency seems to be accentuated with increasing concentrations of enoxacin. In fact, in presence of 0.15 mM of acetic acid, 2.88 and 5.76 microM of antibiotic produces xanthan/biomass yields of 8.13 and 9.82 g g(-1) which drop to below half those values (3.55 g g(-1)) when enoxacin is removed. When enoxacin was kept constant, xanthan/biomass yields showed small increments with the increase of acetic acid. Thus, with 1.44, 2.88 and 4.32 microM enoxacin concentrations, the addition of organic acid produces a 6--8% stimulation of xanthan.