RESUMEN
Next-generation Li-ion batteries must guarantee improved durability, quality, reliability, and safety to satisfy the stringent technical requirements of crucial sectors such as e-mobility. One breakthrough strategy to overcome the degradation phenomena affecting the battery performance is the development of advanced materials integrating smart functionalities, such as self-healing units. Herein, we propose a gel electrolyte based on a uniform and highly cross-linked network, hosting a high amount of liquid electrolyte, with multiple advantages: (i) autonomous, fast self-healing, and a promising PF5-scavenging role; (ii) solid-like mechanical stability despite the large fraction of entrapped liquid; and (iii) good Li+ transport. It is shown that such a gel electrolyte has very good conductivity (>1.0 mS cm-1 at 40 °C) with low activation energy (0.25 eV) for the ion transport. The transport properties are easily restored in the case of physical damages, thanks to the outstanding capability of the polymer to intrinsically repair severe cracks or fractures. The good elastic modulus of the cross-linked network, combined with the high fraction of anions immobilized within the polymer backbone, guarantees stable Li electrodeposition, disfavoring the formation of mossy dendrites with the Li metal anode. We demonstrate the electrolyte performance in a full-cell configuration with a LiNi0.8Mn0.1Co0.1O2 (NMC811) cathode, obtaining good cycling performance and stability.
RESUMEN
Autonomic self-healing (SH), namely, the ability to repair damages from mechanical stress spontaneously, is polarizing attention in the field of new-generation electrochemical devices. This property is highly attractive to enhance the durability of rechargeable Li-ion batteries (LIBs) or Na-ion batteries (SIBs), where high-performing anode active materials (silicon, phosphorus, etc.) are strongly affected by volume expansion and phase changes upon ion insertion. Here, we applied a SH strategy, based on the dynamic quadruple hydrogen bonding, to nanosized black phosphorus (BP) anodes for Na-ion cells. The goal is to overcome drastic capacity decay and short lifetime, resulting from mechanical damages induced by the volumetric expansion/contraction upon sodiation/desodiation. Specifically, we developed novel ureidopyrimidinone (UPy)-telechelic systems and related blends with poly(ethylene oxide) as novel and green binders alternative to the more conventional ones, such as polyacrylic acid and carboxymethylcellulose, which are typically used in SIBs. BP anodes show impressively improved (more than 6 times) capacity retention when employing the new SH polymeric blend. In particular, the SH electrode still works at a current density higher than 3.5 A g-1, whereas the standard BP electrode exhibits very poor performances already at current densities lower than 0.5 A g-1. This is the result of better adhesion, buffering properties, and spontaneous damage reparation.
RESUMEN
High-entropy oxides based on transition metals, such as Mg0.2Co0.2Ni0.2Cu0.2Zn0.2O (TM-HEO), have recently drawn special attention as potential anodes in lithium-ion batteries due to high specific capacity and cycling reversibility. However, the lithiation/delithiation mechanism of such systems is still controversial and not clearly addressed. Here, we report on an operando XAS investigation into TM-HEO-based anodes for lithium-ion cells during the first lithiation/delithiation cycle. This material showed a high specific capacity exceeding 600 mAh g-1 at 0.1 C and Coulombic efficiency very close to unity. The combination of functional and advanced spectroscopic studies revealed complex charging mechanisms, developing through the reduction of transition-metal (TM) cations, which triggers the conversion reaction below 1.0 V. The conversion is irreversible and incomplete, leading to the final collapse of the HEO rock-salt structure. Other redox processes are therefore discussed and called to account for the observed cycling behavior of the TM-HEO-based anode. Despite the irreversible phenomena, the HEO cubic structure remains intact for â¼60% of lithiation capacity, so proving the beneficial role of the configuration entropy in enhancing the stability of the HEO rock-salt structure during the redox phenomena.
RESUMEN
Osimertinib is a third-generation inhibitor approved for the treatment of non-small cell lung cancer. It overcomes resistance to first-generation inhibitors by incorporating an acrylamide group which alkylates Cys797 of EGFR T790M. The mutation of a residue in the P-loop (L718Q) was shown to cause resistance to osimertinib, but the molecular mechanism of this process is unknown. Here, we investigated the inhibitory process for EGFR T790M (susceptible to osimertinib) and EGFR T790M/L718Q (resistant to osimertinib), by modelling the chemical step (i.e., alkylation of Cys797) using QM/MM simulations and the recognition step by MD simulations coupled with free-energy calculations. The calculations indicate that L718Q has a negligible impact on both the activation energy for Cys797 alkylation and the free-energy of binding for the formation of the non-covalent complex. The results show that Gln718 affects the conformational space of the EGFR-osimertinib complex, stabilizing a conformation of acrylamide which prevents reaction with Cys797.
RESUMEN
Capillaria plica (Trichuroidea: Capillariidae), commonly known as bladderworm, is a nematode rarely associated with clinical disease that resides in the lower urinary tract of wild and domestic canids. In the present paper a case of canine urinary capillariosis associated with glomerular amyloidosis is described. The dog, an 8-year-old, male, hunting Jagd terrier had a history of weight loss and diarrhoea and was referred to the University of Parma Teaching Veterinary Hospital (UPTVH). Clinical and laboratory tests shown here suggest that C. plica may be a contributing factor to glomerular amyloidosis.