RESUMEN
This study evaluates the activity of a recombinant chitinase from the leaf-cutting ant Atta sexdens (AsChtII-C4B1) against colloidal and solid α- and ß-chitin substrates. 1H NMR analyses of the reaction media showed the formation of N-acetylglucosamine (GlcNAc) as the hydrolysis product. Viscometry analyses revealed a reduction in the viscosity of chitin solutions, indicating that the enzyme decreases their molecular masses. Both solid state 13C NMR and XRD analyses showed minor differences in chitin crystallinity pre- and post-reaction, indicative of partial hydrolysis under the studied conditions, resulting in the formation of GlcNAc and a reduction in molecular mass. However, the enzyme was unable to completely degrade the chitin samples, as they retained most of their solid-state structure. It was also observed that the enzyme acts progressively and with a greater activity on α-chitin than on ß-chitin. AsChtII-C4B1 significantly changed the hyphae of the phytopathogenic fungus Lasiodiplodia theobromae, hindering its growth in both solid and liquid media and reducing its dry biomass by approximately 61%. The results demonstrate that AsChtII-C4B1 could be applied as an agent for the bioproduction of chitin derivatives and as a potential antifungal agent.
RESUMEN
Nanomaterial-based wound dressings have been extensively studied for the treatment of both minor and life-threatening tissue injuries. These wound dressings must possess several crucial characteristics, such as tissue compatibility, non-toxicity, appropriate biodegradability to facilitate wound healing, effective antibacterial activity to prevent infection, and adequate physical and mechanical strength to withstand repetitive dynamic forces that could potentially disrupt the healing process. Nevertheless, the development of nanostructured wound dressings that incorporate various functional micro- and nanomaterials in distinct architectures, each serving specific purposes, presents significant challenges. In this study, we successfully developed a novel multifunctional wound dressing based on poly(lactic acid) (PLA) fibrous membranes produced by solution-blow spinning (SBS) and electrospinning. The PLA-based membranes underwent surface modifications aimed at tailoring their properties for utilization as effective wound dressing platforms. Initially, beta-chitin whiskers were deposited onto the membrane surface through filtration, imparting hydrophilic character. Afterward, silver nanoparticles (AgNPs) were incorporated onto the beta-chitin layer using a spray deposition method, resulting in platforms with antimicrobial properties against both Staphylococcus aureus and Escherichia coli. Cytotoxicity studies demonstrated the biocompatibility of the membranes with the neonatal human dermal fibroblast (HDFn) cell line. Moreover, bilayer membranes exhibited a high surface area and porosity (> 80%), remarkable stability in aqueous media, and favorable mechanical properties, making them promising candidates for application as multifunctional wound dressings.
RESUMEN
We systematically investigated the effect of ß-chitin (BCH) particle size on the preparation of nanocrystals/nanowhiskers (CWH) by acid hydrolysis. Regardless this variable, CWH aqueous suspension exhibited outstanding stability and the average degree of acetylation remained nearly constant after the acid treatment. In contrast, the morphology, dimensions, crystallinity, and molecular weight of CHW were significantly affect by the particle size. Although needle-like crystals have predominated, BCH particles sizes significantly affected the dimensions and asymmetry of CWH, as confirmed by the rheological and NMR relaxation (T2) behaviors. According to different SSNMR approaches, the acid hydrolysis meaningless affected the local chain conformation, while the spatial freedom of BCH intersheets, rated upon the mobility of methyl segments, was taken as evidence of higher permeability of acid into small particle sizes. Thus, this study demonstrated the importance of standardizing the surface/bulk proportions of ß-chitin aiming to predict and control the CWH morphology and related properties.
RESUMEN
Vulvovaginal candidiasis (VVC) represents a considerable health burden for women. Despite the availability of a significant array of antifungal drugs and topical products, the management of the infection is not always effective, and new approaches are needed. Here, we explored cationic N-(2-hydroxy)-propyl-3-trimethylammonium, O-palmitoyl chitosan nanoparticles (NPs) as carriers of clotrimazole (CLT) for the topical treatment of VVC. CLT-NPs with approximately 280 nm in diameter were obtained by self-assembly in water and subsequent stabilization by ionic crosslinking with tripolyphosphate. The nanosystem featured pH-independent sustained drug release up to 24 h, which affected both in vitro anti-Candida activity and cytotoxicity. The CLT-loaded nanostructured platform yielded favorable selectivity index values for a panel of standard strains and clinical isolates of Candida spp. and female genital tract cell lines (HEC-1-A, Ca Ski and HeLa), as compared to the free drug. CLT-NPs also improved in vitro drug permeability across HEC-1-A and Ca Ski cell monolayers, thus suggesting that the nanocarrier may provide higher mucosal tissue levels of the active compound. Overall, data support that CLT-NPs may be a valuable asset for the topical treatment of VVC. STATEMENT OF SIGNIFICANCE: Topical azoles such as clotrimazole (CLT) are first line antifungal drugs for the management of vulvovaginal candidiasis (VVC), but their action may be limited by issues such as toxicity and poor capacity to penetrate the genital mucosa. Herein, we report on the ability of a new cationic N-(2hydroxy)-propyl-3-trimethylammonium, O-dipalmitoyl chitosan derivative (DPCat35) to yield tripolyphosphate-reinforced micelle-like nanostructures that are suitable carriers for CLT. In particular, these nanosystems were able to improve the in vitro selectivity index of the drug and to provide enhanced epithelial drug permeability when tested in cell monolayer models. These data support that CLT-loaded DPCat35 nanoparticles feature favorable properties for the development of new nanomedicines for the topical management of VVC.
Asunto(s)
Candidiasis Vulvovaginal , Quitosano , Nanopartículas , Antifúngicos/farmacología , Antifúngicos/uso terapéutico , Candida , Candidiasis Vulvovaginal/tratamiento farmacológico , Clotrimazol/farmacología , Femenino , HumanosRESUMEN
Two samples of N-(2-hydroxy)-propyl-3-trimethylammonium, O-palmitoyl chitosan (DPCat) with different average degrees of quaternization named as DPCat35 (DQ¯ = 35%) and DPCat80 (DQ¯ = 80%), were successfully synthesized by reacting glycidyltrimethylammonium chloride (GTMAC) with O-palmitoyl chitosan (DPCh) derivative (DS¯ = 12%). Such amphiphilic derivatives of chitosan were fully water-soluble at 1.0 < pH < 12.0 and showed significant electrostatic stability enhancement of a self-assembly micellar nanostructure (100-320 nm) due to its positively-charged out-layer. In vitro mucoadhesive and cytotoxicity essays toward healthy fibroblast cells (Balb/C 3T3 clone A31 cell), human prostate cancer (DU145) and liver cancer (HepG2/C3A) cell lines revealed that the biological properties of DPCat derivatives were strongly dependent on DQ¯. Additionally, DPCat35 had better interactions with the biological tissue and with mucin glycoproteins at pH 7.4 as well as exhibited potential to be used on the development of drug delivery systems for prostate and liver cancer treatment.
Asunto(s)
Quitosano , Sistemas de Liberación de Medicamentos , Compuestos Epoxi/química , Compuestos de Amonio Cuaternario/química , Animales , Células 3T3 BALB , Quitosano/síntesis química , Quitosano/química , Quitosano/farmacología , Células Hep G2 , Humanos , Neoplasias Hepáticas/tratamiento farmacológico , Masculino , Ratones , Neoplasias de la Próstata/tratamiento farmacológico , Electricidad EstáticaRESUMEN
Chitosans with different average degrees of acetylation and weight molecular weight were analyzed by time-domain NMR relaxometry using the recently proposed pulse sequence named Rhim and Kessemeier - Radiofrequency Optimized Solid-Echo (RK-ROSE) to acquire 1H NMR signal of solid-state materials. The NMR signal decay was composed of faster (tenths of µs) and longer components, where the mobile-part fraction exhibited an effective relaxation transverse time assigned to methyl hydrogens from N-acetyl-d-glucosamine (GlcNAc) units. The higher intrinsic mobility of methyl groups was confirmed via DIPSHIFT experiments by probing the 1H-13C dipolar interaction. RK-ROSE data were modeled by using Partial Least Square (PLS) multivariate regression, which showed a high coefficient of determination (R2 > 0.93) between RK-ROSE signal profile and average degrees of acetylation and crystallinity index, thus indicating that time-domain NMR consists in a promising tool for structural and morphological characterization of chitosan.
Asunto(s)
Quitosano/química , Espectroscopía de Resonancia Magnética/métodos , Acetilación , Acetilglucosamina/química , Animales , Quitina/química , Decapodiformes/química , Hidrógeno/química , Análisis de los Mínimos Cuadrados , Peso Molecular , Análisis Multivariante , Temperatura , TermogravimetríaRESUMEN
Wound repair is a complex process that calls for strategies to allow a rapid and effective regeneration of injured skin, which has stimulated the research of advanced wound dressings. Herein, highly porous membranes of N,O-carboxymethylchitosan (CMCh), and poly (vinyl alcohol) (PVA) were successfully prepared via a green and facile freeze-drying method of blend solutions containing CMCh/PVA at weight ratio 25/75. Membranes composed only by CMCh were also prepared and genipin was used for crosslinking. Different contents of TiO2 nanoparticles were incorporated to both type of membranes, which were characterized in terms of morphology, porosity (Φ), swelling capacity (S.C.), mechanical properties, susceptibility to lysozyme degradation and in vitro cytotoxicity toward human fibroblast (HDFn) and keratinocytes (HaCaT) cells. Larger apparent pores were observed in the surface of the genipin-crosslinked CMCh membrane, which resulted in higher porosity (Φ ≈ 76%) and swelling capacity (S.C. ≈ 1720%) as compared to CMCh/PVA membrane (Φ ≈ 68%; S.C. ≈ 1660%). The porosity of both types of membranes decreased upon the addition of TiO2 nanoparticles while swelling capacity increased. Due to their high porosity and swelling capacity, adequate mechanical properties, controlled degradability, and cytocompatibility, such carboxymethylchitosan-based membranes are potentially useful as wound dressings.
Asunto(s)
Vendajes , Quitosano/análogos & derivados , Membranas Artificiales , Cicatrización de Heridas/efectos de los fármacos , Muerte Celular , Supervivencia Celular/efectos de los fármacos , Quitosano/farmacología , Reactivos de Enlaces Cruzados/química , Fibroblastos/citología , Fibroblastos/efectos de los fármacos , Células HaCaT , Humanos , Iridoides/química , Queratinocitos/citología , Queratinocitos/efectos de los fármacos , Muramidasa/metabolismo , Alcohol Polivinílico/química , Porosidad , Espectrometría por Rayos X , Estrés Mecánico , Titanio/químicaRESUMEN
We propose a novel approach relied on high-resolution solid-state 13C NMR spectroscopy to quantify the crystallinity index of chitosans (Ch) prepared with variable average degrees of acetylation (DA¯) from 5% to 60 % and average weight molecular weight (M¯w) ranged in 0.15 × 106 g mol-1-1.2 × 106 g mol-1. The Dipolar Chemical Shift Correlation (DIPSHIFT) curve of the C(6)OH segment revealed increased mobility dynamic, which induced different distribution from trans-to-gauche conformations in relation to C(4). Indeed, 1H-13C Heteronuclear Correlation (2D HETCOR) showed that distinguished C4 chemical shifts correlates with the same aliphatic protons. The short-range ordering can be assigned to C4/C6 signals on 13C CPMAS and, for our case, the deconvolution procedure between disordered and ordered phases revealed increasing crystallinity with DA¯, as confirmed by SVD multivariate analysis. This work extended the knowledge regarding the use of 13C CPMAS technique to predict the crystallinity of chitosans without the use of amorphous standards.
RESUMEN
Since chitosan presents the ability to interact with a wide range of molecules, it has been one of the most popular natural polymers for the construction of layer-by-layer thin films. In this study, depth-profiling X-ray photoelectron spectroscopy (XPS) was employed to track the diffusion of sulfonated polystyrene (SPS) in carboxymethyl cellulose/chitosan (CMC/Chi) multilayers. Our findings suggest that the CMC/Chi film does not constitute an electrostatic barrier sufficient to block diffusion of SPS, and that diffusion can be controlled by adjusting the diffusion time and the molecular weight of the polymers that compose the CMC/Chi system. In addition to monitoring the diffusion, it was also possible to observe a process of preferential interaction between Chi and SPS. Thus, the nitrogen N 1s peak, due to functional groups found exclusively in chitosan chains, was the key factor to identifying the molecular interactions involving chitosan and the different polyanions. Accordingly, the presence of a strong polyanion such as SPS shifts the N 1s peak to a higher level of binding energy. Such results highlight that understanding the fundamentals of polymer interactions is a major step to fine-tuning the internal architecture of LbL structures for specific applications (e.g., drug release).
RESUMEN
N-acetyl-D-glucosamine (GlcNAc) is an important amino-monosaccharide with great potential for biotechnological applications. It has traditionally been produced by the chemical hydrolysis of chitin, despite certain industrial and environmental drawbacks, including acidic wastes, low yields and high costs. Therefore, enzymatic production has gained attention as a promising environmentally-friendly alternative to the chemical processes. In this study we demonstrate the GlcNAc bioproduction from colloidal α-chitin using an enzyme cocktail containing endochitinases and exochitinases (chitobiosidases and N-acetyl-glucosaminidases). The enzyme cocktail was extracted after fermentation in a bioreactor by Aeromonas caviae CHZ306, a chitinolytic marine bacterium with great potential for chitinase production. Hydrolysis parameters were studied in terms of temperature, pH, enzyme and substrate concentration, and reaction time, achieving over 90% GlcNAc yield within 6 h. The use of colloidal α-chitin as substrate showed a substantial improvement of GlcNAc yields, when compared with ß-chitin and α-chitin polymorphs. Such result is directly related to a significant decrease in crystallinity and viscosity from natural α-chitin, providing the chitinase with greater accessibility to the depolymerized chains. This study provides valuable information on the GlcNAc bioproduction from chitin using an enzymatic approach, addressing the key points for its production, including the enzyme cocktail composition and the substrate structures.
Asunto(s)
Acetilglucosamina/biosíntesis , Aeromonas caviae/enzimología , Quitina/metabolismo , Quitinasas/metabolismo , Medios de Cultivo/química , Concentración de Iones de Hidrógeno , Hidrólisis , Espectroscopía de Resonancia Magnética , Peso Molecular , Temperatura , Viscosidad , Difracción de Rayos XRESUMEN
Methoxypoly(ethyleneglycol)-graft-chitosan (PEG-g-Ch) was prepared by grafting polyethyleneglycol into chitosans (Ch) exhibiting different average degree of deacetylation (60%â¯<â¯DD¯â¯<â¯95%). 1H NMR showed that PEG-g-Ch derivatives presented high average degree of N-substitution (DS¯â¯≈â¯40%) and such derivatives exhibited full water solubility at 1.0â¯<â¯pHâ¯<â¯11.0. The mPEG-g-Ch derivatives displayed much lower intrinsic viscosity (20â¯mLâ¯g-1â¯<â¯[η]â¯<â¯110â¯mLâ¯g-1) as compared to the parent chitosans (440â¯mLâ¯g-1â¯<â¯[η]â¯<â¯1650â¯mLâ¯g-1) due to extensive exposition of PEG chains to the aqueous medium and compact coiling of the chitosan backbone. The presence of numerous PEG chains grafted into chitosan also determined the crystalline arrangement and the thermal stability of PEG-g-Ch derivatives. The rheological study showed that the concentrated aqueous solutions of PEG-g-Ch derivatives displayed pseudoplastic behavior regardless of the parent chitosans´ characteristics and no dependence of dynamic viscosity on the temperature. However, PChD2 (DD¯â¯≈â¯76%; [η]â¯≈â¯1201â¯mLâ¯g-1) showed a distinct rheological behavior as it formed a physically cross-linked hydrogel that exhibited a thermo-induced sol-gel transition at ≈38⯰C.
Asunto(s)
Quitosano/química , Hidrogeles/química , Polietilenglicoles/química , Agua/química , Concentración de Iones de Hidrógeno , Transición de Fase , Reología , Solubilidad , Temperatura , ViscosidadRESUMEN
In this paper, chitosan was used as protective agent for dual temperature-/pH-sensitive poly(N-vinylcaprolactam-co-itaconic acid-co-ethylene- glycol dimethacrylate)- based hydrogel nanoparticles (poly(NVCL-co-IA-co-EGDMA)) aiming avoid their undesirable colloidal destabilization at different conditions of body human tissues. Thus, poly(NVCL-co-IA-co-EGDMA) was embedded into chitosan and a new solid dispersion was prepared via spray-drying and ketoprofen was used as carrier. Two different sizes of hydrogel nanoparticles (120.6 nm and 185.9 nm) were evaluated and they exhibited a drug encapsulation efficiency of the 39.6% and 57.8%, respectively. The smaller nanoparticles showed to be faster for releasing of ketoprofen at pH 7.4 and 37 °C due to their larger surface area and higher swelling ability. Chitosan played a role of a secondary barrier for the ketoprofen diffusion, extending its release compared to hydrogel nanoparticles alone. Among two concentrations (40 wt% and 70 wt%) of hydrogel nanoparticles related to chitosan, the first one induced higher percentages of ketoprofen release: 74.2% against 64.6%. In addition, the interactions between chitosan matrix and poly(NVCL-co-IA-co-EGDMA) did not change the multi-responsive behavior of hydrogels, suggesting the chitosan was efficient for keeping integrity of nanoparticles hydrogels. Chitosan/poly(NVCL-co-IA-co-EGDMA) hybrid microparticles seems to be a promising new carrier for release of hydrophobic drugs, such as ketoprofen.
Asunto(s)
Quitosano/química , Sistemas de Liberación de Medicamentos/métodos , Hidrogeles/química , Cetoprofeno/administración & dosificación , Nanopartículas/química , Polímeros/química , Antiinflamatorios no Esteroideos/química , Antiinflamatorios no Esteroideos/farmacocinética , Caprolactama/análogos & derivados , Caprolactama/química , Portadores de Fármacos/química , Liberación de Fármacos , Concentración de Iones de Hidrógeno , Interacciones Hidrofóbicas e Hidrofílicas , Cetoprofeno/química , Cetoprofeno/farmacocinética , Metacrilatos/química , Microscopía Electrónica de Transmisión , Nanopartículas/ultraestructura , Polímeros/síntesis química , Succinatos/química , TemperaturaRESUMEN
Blend solutions of poly(ε-caprolactone) (PCL) and N-(2-hydroxy)-propyl-3-trimethylammonium chitosan chloride (QCh) were successfully electrospun. The weight ratio PCL/QCh ranged in the interval 95/5-70/30 while two QCh samples were used, namely QCh1 (DQ¯â¯=â¯47.3%; DPv¯â¯=â¯2218) and QCh2 (DQ¯â¯=â¯71.1%; DPv¯â¯=â¯1427). According to the characteristics of QCh derivative and to the QCh content on the resulting PCL/QCh nonwoven, the nanofibers displayed different average diameter (175â¯nm-415â¯nm), and the nonwovens exhibited variable porosity (57.0%-81.6%), swelling capacity (175%-425%) and water vapor transmission rate (1600â¯gâ¯m-2 24â¯h-2500â¯gâ¯m-2 24â¯h). The surface hydrophilicity of nonwovens increases with increasing QCh content, favoring fibroblast (HDFn) adhesion and spreading. Tensile tests revealed that the nonwovens present a good balance between elasticity and strength under both dry and hydrated state. Results indicate that the PCL/QCh electrospun nonwovens are new nanofibers-based biomaterials potentially useful as wound dressings.
Asunto(s)
Quitosano/química , Poliésteres/química , Materiales Biocompatibles/química , Nanofibras/química , Nanoestructuras/química , Ingeniería de Tejidos/métodos , Andamios del TejidoRESUMEN
This work addresses the establishment and characterization of gellan gum:pectin (GG:P) biodegradable mucoadhesive beads intended for the colon-targeted delivery of resveratrol (RES). The impact of the polymer carrier system on the cytotoxicity and permeability of RES was evaluated. Beads of circular shape (circularity index of 0.81) with an average diameter of 914 µm, Span index of 0.29, and RES entrapment efficiency of 76% were developed. In vitro drug release demonstrated that beads were able to reduce release rates in gastric media and control release for up to 48 h at an intestinal pH of 6.8. Weibull's model correlated better with release data and b parameter (0.79) indicated that the release process was driven by a combination of Fickian diffusion and Case II transport, indicating that both diffusion and swelling/polymer chains relaxation are processes that contribute equally to control drug release rates. Beads and isolated polymers were observed to be safe for Caco-2 and HT29-MTX intestinal cell lines. RES encapsulation into the beads allowed for an expressive reduction of drug permeation in an in vitro triple intestinal model. This feature, associated with low RES release rates in acidic media, can favor targeted drug delivery from the beads in the colon, a promising behavior to improve the local activity of RES.
RESUMEN
High intensity ultrasound irradiation was used to convert beta-chitin (BCHt) into chitosan (CHs). Typically, beta-chitin was suspended in 40% (w/w) aqueous sodium hydroxide at a ratio 1/10 (gmL(-1)) and then submitted to ultrasound-assisted deacetylation (USAD) during 50min at 60°C and a fixed irradiation surface intensity (52.6Wcm(-2)). Hydrogen nuclear magnetic resonance spectroscopy and capillary viscometry were used to determine the average degree of acetylation (DAâ¾) and viscosity average degree of polymerization (DPvâ¾), respectively, of the parent beta-chitin (DAâ¾=80.7%; DPvâ¾=6865) and USAD chitosans. A first USAD reaction resulted in chitosan CHs1 (DAâ¾=36.7%; DPvâ¾=5838). Chitosans CHs2 (DAâ¾=15.0%; DPvâ¾=5128) and CHs3 (DAâ¾=4.3%; DPvâ¾=4889) resulted after repeating the USAD procedure to CHs1 consecutively once and twice, respectively. Size-exclusion chromatography analyzes allowed the determination of the weight average molecular weight (Mwâ¾) and dispersity (Ð) of CHs1 (Mwâ¾=1,260,000gmol(-1); Ð=1.4), CHs2 (Mwâ¾=1,137,000gmol(-1); Ð=1.4) and CHs3 (Mwâ¾=912,000gmol(-1); Ð=1.3). Such results revealed that, thanks to the action of high intensity ultrasound irradiation, the USAD process allowed the preparation of unusually high molecular weight, randomly deacetylated chitosan, an important breakthrough to the development of new high grade chitosan-based materials displaying superior mechanical properties.
Asunto(s)
Quitina , Quitosano , Acetilación , Peso Molecular , Hidróxido de Sodio , ViscosidadRESUMEN
The formation of chitosan hydrogels without any external cross-linking agent was successfully achieved by inducing the gelation of a viscous chitosan solution with aqueous NaOH or gaseous NH3. The hydrogels produced from high molecular weight (Mw ≈ 640â¯000 g mol(-1)) and extensively deacetylated chitosan (DA ≈ 2.8%) at polymer concentrations above â¼2.0% exhibited improved mechanical properties due to the increase of the chain entanglements and intermolecular junctions. The results also show that the physicochemical and mechanical properties of chitosan hydrogels can be controlled by varying their polymer concentration and by controlling the gelation conditions, that is, by using different gelation routes. The biological evaluation of such hydrogels for regeneration of infarcted myocardium revealed that chitosan hydrogels prepared from 1.5% polymer solutions were perfectly incorporated onto the epicardial surface of the heart and presented partial degradation accompanied by mononuclear cell infiltration.
Asunto(s)
Quitosano/química , Hidrogeles/química , Infarto del Miocardio/prevención & control , Polímeros/química , Regeneración/fisiología , Animales , Materiales Biocompatibles , Reactivos de Enlaces Cruzados/química , Femenino , Ensayo de Materiales , Ratas , Ratas Wistar , Función Ventricular Izquierda , AguaRESUMEN
Highly porous genipin cross-linked membranes of carboxymethylchitosan exhibiting different crosslinking degree (3%Asunto(s)
Quitosano/análogos & derivados
, Reactivos de Enlaces Cruzados/química
, Iridoides/química
, Membranas Artificiales
, Animales
, Quitosano/química
, Quitosano/aislamiento & purificación
, Decapodiformes
, Módulo de Elasticidad
, Muramidasa/metabolismo
, Porosidad
, Espectroscopía de Protones por Resonancia Magnética
, Espectroscopía Infrarroja por Transformada de Fourier
, Resistencia a la Tracción
, Viscosidad
RESUMEN
A quaternized derivative of chitosan, namely N-(2-hydroxy)-propyl-3-trimethylammonium chitosan chloride (QCh), was synthesized by reacting glycidyltrimethylammonium chloride (GTMAC) and chitosan (Ch) in acid medium under microwave irradiation. Full-factorial 2(3) central composite design and response surface methodology (RSM) were applied to evaluate the effects of molar ratio GTMAC/Ch, reaction time and temperature on the reaction yield, average degree of quaternization (DQ) and intrinsic viscosity ([η]) of QCh. The molar ratio GTMAC/Ch was the most important factor affecting the response variables and RSM results showed that highly substituted QCh (DQ = 71.1%) was produced at high yield (164%) when the reaction was carried out for 30min. at 85°C by using molar ratio GTMAC/Ch 6/1. Results showed that microwave-assisted synthesis is much faster (≤30min.) as compared to conventional reaction procedures (>4h) carried out in similar conditions except for the use of microwave irradiation.
Asunto(s)
Quitosano/análogos & derivados , Microondas , Quitosano/síntesis química , Quitosano/química , Compuestos Epoxi/química , Espectroscopía de Resonancia Magnética , Compuestos de Amonio Cuaternario/química , Solubilidad , Espectroscopía Infrarroja por Transformada de Fourier , Viscosidad , Difracción de Rayos XRESUMEN
Objetivo: Este estudo avaliou através de imagens radiográficas digitais, a ação de biomateriais de quitosana e de cloridrato de quitosana, com baixo e alto peso molecular, utilizados na correção de defeitos ósseos de tamanho crítico (DOTC)em calvária de ratos. Material e MétodoO: DOTCs com 8 mm de diâmetro foram criados cirurgicamente na calvária de 50 ratos Holtzman. Em 10 animais o defeito foi preenchido foram preenchidos com coágulo sanguíneo (controle negativo). Os 40 animais restantes foram divididos de acordo com o biomaterial utilizado no preenchimento do defeito (quitosana de baixo peso e de alto peso molecular, e cloridrato de quitosana de baixo e de alto peso molecular), e foram avaliados em dois períodos experimentais (15 e 60 dias), totalizando 5 animais/biomaterial/período de avaliação. Resultado: A avaliação radiográfica foi feita utilizando duas radiografias digitais do crânio do animal: uma tomada logo após o defeito ósseo ser criado e a outra no momento do sacrifício. Nessas imagens, foi avaliada a densidade óssea radiográfica inicial e a final na área do defeito, que foram comparadas. As análises na densidade óssea radiográfica indicaram aumento da densidade óssea radiográfica dos DOTCs tratados para todos os biomateriais testados, em ambos os períodos. Resultados semelhantes foram encontrados no grupo controle. Conclusão: Conclui-se que os biomateriais de quitosana testados não foram capazes de aumentar a densidade radiográfica em DOTC realizados em calvária de ratos.
Objective: This study evaluated, using digital radiographic images, the action of chitosan and chitosan hydrochloride biomaterials, with both low and high molecular weight, used in the correction of critical-size bone defects (CSBD's) in rat's calvaria. Material and Method: CSBD's with 8 mm in diameter were surgically created in the calvaria of 50 Holtzman rats and these were filled with a blood clot (Control), low molecular weight chitosan, high molecular weight chitosan, low molecular weight chitosan hydrochloride and high molecular weight chitosan hydrochloride, for a total of 10 animals, which were divided into two experimental periods (15 and 60 days), for each biomaterial. The radiographic evaluation was made using two digital radiographs of the animal's skull: one taken right after the bone defect was created and the other at the moment of the sacrifice, providing the initial and the final radiographic bone density in the area of the defect, which were compared. Result: Analysis of radiographic bone density indicated that the increase in the radiographic bone density of the CSBD's treated with the proposed biomaterials, in either molecular weight, in both observed periods, where similar to those found in control group. Conclusion: Tested chitosan-based biomaterials were not able to enhance the radiographic density in the CSBD's made in rat's calvaria.
Asunto(s)
Animales , Ratas , Materiales Biocompatibles , Regeneración Ósea , Interpretación de Imagen Radiográfica Asistida por Computador , Quitina , Radiografía Dental Digital , QuitosanoRESUMEN
Natural polymers, such as chitosan, obtained from chitin, are been widely studied for use in the tissue regeneration field. This study established a protocol to attain membranes made from this biopolymer, consisting of high or low molecular weight chitosan. The biocompatibility of these membranes was histologically evaluated, comparing them to collagen membrane surgically implanted in rat subcutaneous tissue. Fifteen Holtzmann rats were divided in three experimental groups: High and Low Molecular Weight Chitosan membranes (HMWC and LMWC) and Collagen membranes (C-control group); each of them with three experimental periods: 7, 15 and 30 days. As a result, after the seven days evaluation, the membranes were present and associated with a variable degree of inflammation, and after the 15 and 30 days evaluations, the membranes were absent in all groups. It is concluded that the chitosan-based membranes were successfully attained and presented comparable resorption times to collagen membranes.