RESUMEN
We present the development of a platform for label-free biosensing based on overlayered Long Period Gratings (LPGs) working in transition mode. Nano-scale layers of Polystyrene (PS) with different thicknesses were deposited onto the same LPG to test the performances of the device in different working points of its modified sensitivity characteristic. Adsorption dynamic of biotinylated bovine serum albumin (BBSA) onto the PS overlays was on-line monitored as well as a subsequent streptavidin (SA) binding dynamic on the biotinylated sites of the protein ad-layer. Experimental results show that overlayered LPGs are among the most sensitive refractive index transducers to be employed in label-free biochemical detection and that wide margins of further optimization exist.
Asunto(s)
Técnicas Biosensibles/instrumentación , Biotecnología/instrumentación , Refractometría/instrumentación , Diseño Asistido por Computadora , Diseño de Equipo , Análisis de Falla de Equipo , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Coloración y EtiquetadoRESUMEN
This work has been devoted to present and demonstrate a novel approach for the fabrication of micro-structured fiber Bragg gratings (MSFBGs) with enhanced control of the geometric features and thus of the spectral properties of the final device. The investigated structure relies on the localized stripping of the cladding layer in a well defined region in the middle of the grating structure leading to the formation of a defect state in the spectral response. In order to fully explore the versatility of MSFBGs for sensing and communications applications, a technological assessment of the fabrication process aimed to provide high control of the geometrical features is required. To this aim, here, we demonstrate that the optimization of this device is possible by adopting a fabrication process based on polymeric coatings patterned by high resolution UV laser micromachining tools. The function of the polymeric coating is to act as mask for the HF based chemical etching process responsible for the cladding stripping. Whereas, UV laser micromachining provides a valuable method to accurately pattern the polymeric coating and thus obtain a selective stripping along the grating structure. Here, we experimentally demonstrate the potentiality of the proposed approach to realize reliable and cost efficient MSFBGs enabling the prototyping of advanced photonics devices based on this technology.
RESUMEN
In this work, the numerical and experimental investigation of the cladding modes re-organization in high refractive index (HRI) coated Long Period Gratings (LPGs) is reported. Moreover, the effects of the cladding modes re-organization on the sensitivity to the surrounding medium refractive index (SRI) have been outlined. When azimuthally symmetric nano-scale HRI coatings are deposited along LPGs devices, a significant modification of the cladding modes distribution occurs, depending on the layer features (refractive index and thickness) and on the SRI. In particular, if layer parameters are properly chosen, the transition of the lowest order cladding mode into an overlay mode occurs. As a consequence, a cladding modes re-organization can be observed leading to relevant improvements in the SRI sensitivity in terms of wavelength shift and amplitude variations of the LPGs attenuation bands.