Strength of recommendation for single-visit root canal treatment: grading the body of the evidence using a patient-centred approach.

AIM: To identify, search for and critically interpret the results from clinical studies on single- versus multiple-visit root canal treatment in the light of an evidence-based paradigm. For that purpose, the quality of the available body of evidence was assessed using the SORT 'grade' - Strength of Recommendation Taxonomy. METHODOLOGY: A protocol was followed including all aspects of the review methods: (i) search strategy, (ii) inclusion criteria for studies, (iii) screening methods, (iv) quality assessment, (v) data synthesis of the selected studies, and (vi) the assessment of quality of the body of evidence available by the means of the SORT 'grade'. An extensive search of recent biomedical literature was performed in PubMed (up to May, 2014), EMBASE (dating from 1980 to May 2014) and Cochrane databases with appropriate headings and keywords related to single- and multiple-visit root canal treatment. Selected studies were stratified according to their level of evidence using the SORT criteria: (i) quality - Level A high-quality evidence, Level B medium/low-quality evidence and Level C no evidence; (ii) degree of consistency - consistent, when most studies found a similar conclusion, or inconsistent, when there was considerable variation amongst study findings. RESULTS: After the digital and manual searches, 246 studies were indentified. Two hundred and seven studies were eliminated by exclusion criteria, resulting in a yield of 39 articles that were selected for retrieval. Of the 39 articles, only 11 could be classified as Level 2 (B); the other 28 articles did not obey the criteria to be considered as real patient-oriented evidence; thus, they were classified as Level 3 (C). No studies were ranked as Level 1 because they did not obey the minimum standard to be considered as both good-quality research and patient-oriented evidence. Despite this, all of the selected Level B studies reported no significant differences between single- and multiple-visit treatments. CONCLUSION: There is B-level (mid-level) evidence to confirm there is no difference between the two different treatments, based on research addressing clinical outcomes and using some consistent but limited-quality methods of scientific investigation. More studies focused on evaluating patient-centred outcomes are urgently required.

Additional effects of homeopathy on chronic periodontitis: a 1-year follow-up randomized clinical trial.

BACKGROUND AND OBJECTIVE: The aim of this study was test the hypothesis that homeopathy (H) enhances the effects of scaling and root planing (SRP) in patients with chronic periodontitis (CP). MATERIALS AND METHODS: 50 patients with CP were randomly allocated to one of two treatment groups: SRP (C-G) or SRP + H (H-G). Assessments were made at baseline and after 3 and 12 months of treatments. The local and systemic responses to the treatments were evaluated by clinical and serologic parameters, respectively. RESULTS: Both groups displayed significant improvements, however, using clinical attachment gain and reductions in HDL, LDL and Total Cholesterol, Triglycerides, Glucose and Uric acid, from baseline to 1 year, as criteria for treatment success, H-G performed significantly better than C-G. CONCLUSION: The findings of this 1-year follow-up randomized clinical trial suggest that homeopathic medicines, as an adjunctive to SRP, can provide significant local and systemic improvements for CP patients.

Additional benefits of homeopathy in the treatment of chronic periodontitis: a randomized clinical trial.

BACKGROUND AND OBJECTIVE: Homeopathic medicine (HM) in the treatment of Chronic Periodontitis (CP) aims to restore the vital energy balance of the patient allowing the body to heal itself. Thus, the aim of this study was to evaluate the additional benefits of HM as an adjunctive to conventional periodontal treatment (CPT). MATERIALS AND METHODS: After sample size calculation, sixty individuals of both genders, and ages varying between 35 and 70 years old, 40 with chronic periodontitis (CP group - CPG) and 20 without CP (Healthy Group - HG) participated in this "Single-Blind Randomized Controlled Clinical Trial". The CP patients were divided into two groups: one was submitted only to CPT (CP Control Group - CPT-C) and the other group was submitted to CPT and HM, according to the similia principle (CP Test Group - CPTT). Assessments were made at baseline and after 90 days of treatments. The local and systemic responses to the treatments were evaluated by clinical and laboratory parameters, respectively. Data were analyzed by parametric and nonparametric tests. The level of significance was 5%. RESULTS: At baseline, CP patients presented higher values of LDL cholesterol and blood glucose than HG individuals. After the treatment, all the systemic parameters evaluated decreased in CP patients, except LDL and HDL Cholesterol in CPT-C, and HDL Cholesterol in CPT-T. There was a statistical gain in clinical attachment level only in CPT-T (+0.51 mm) after 90 days; however, there was a reduction in probing depth, in the level of visible plaque and in the bleeding on probing, in both CP groups (CPT-C and CPT-T) after 90 days. CONCLUSION: The findings of this 3-month follow-up study concluded that H M, as an adjunctive to CPT, can provide additional benefits in the treatment of CP.

Association of subgingival colonization of Candida albicans and other yeasts with severity of chronic periodontitis.

BACKGROUND AND OBJECTIVE: The aim of this study is to analyze the relationship between the subgingival colonization by Candida albicans and other yeasts with the severity of chronic periodontitis (CP). MATERIAL AND METHODS: After sample size calculation, 40 patients with CP and 20 healthy subjects (HS) were included in the study. Cases of slight-moderate (MCP, n = 23) and severe CP (SCP, n = 17) were defined according to the Centers for Disease Control/American Association of Periodontology classification. Subgingival samples were acquired using sterile paper-points from the sulcus or the deepest periodontal pocket of each healthy and subject with CP, respectively, and were cultured aerobically on three selective media. Yeast colonies that grew on the surface of plates were later identified by biochemical reactions. Statistical tests were used to analyze the association between subgingival yeast colonization (number of yeast-positive individuals and colony forming units (CFU) per subject) and periodontal disease status, considering statistical significance when P < 0.05. RESULTS: Although several yeast species were found (C. parapisilosis, Rhodotorula sp., C. dubliniensis and C. tropicalis), only C. albicans was present in all the patients with yeast-positive CP. Twelve patients (30%) with CP presented yeasts in the subgingival biofilm while only three patients (15%) in the HS group were positive for these microorganisms. No statistical difference was found between the CP and HS groups (P = 0.084). However, when the CP group was divided on the basis of severity, statistical differences were observed between the SCP and MCP groups (47% vs. 17%, P = 0.043), and between the SCP and HS groups (47% vs. 15%, P = 0.033). No statistical difference was observed between the MCP and HS groups (17% vs. 15%, P = 0.832). High densities of yeasts were found only in patients with MCP and SCP (mean and range 61.25 (0-100) CFU/plate and mean and range 51 (0-101) CFU/plate, respectively). CONCLUSION: In this group of patients, subgingival colonization of some yeasts, especially C. albicans, was associated with the severity of CP.

Cytocompatibility of the ready-to-use bioceramic putty repair cement iRoot BP Plus with primary human osteoblasts.

AIM: To verify the in vitro cytocompatibility of iRoot BP Plus (iRoot) and to compare it with White ProRoot MTA (MTA). METHODOLOGY: Thirty-six human maxillary incisor root canals were prepared using a step-back flaring technique. The apical 3 mm was resected perpendicular to the long axis at the roots, and root-end cavities were prepared with the aid of an ultrasonic device plus a diamond retrotip with continuous irrigation using water, producing standardized preparations. After that, the root-end cavities were filled with iRoot or MTA, and each root was exposed to cell culture media for 24 or 48 h. Human osteoblast cells were exposed to the extracts thus obtained, and a multiparametric cell viability assay was performed, evaluating mitochondrial activity, membrane integrity and cell density. The results were analysed by one-way analysis of variance, complemented with the Duncan post-test (P < 0.05). RESULTS: Cells exposed to MTA revealed a cytocompatibility pattern similar to the untreated cells (negative control), at both experimental times (P > 0.05). iRoot, however, promoted a significantly poorer viability than MTA and the control, after 48 h of exposure (P < 0.001). Nevertheless, iRoot did not induce critical cytotoxic effects because cell viability remained higher than 70% of the control group in most tests performed. CONCLUSION: iRoot and MTA were biocompatible and did not induce critical cytotoxic effects.

A molecular dynamics study of ferroelectric nanoparticles immersed in a nematic liquid crystal.

A large number of interesting phenomena related to the insertion of colloidal particles in liquid crystals (LC) have recently been reported. Here, we investigate effects caused by the addition of spherically shaped ferroelectric nanoparticles to a nematic liquid crystal. Using molecular dynamics (MD) simulations, the density of LC molecules, the orientational order parameter, and the polar and azimuthal angle profiles are calculated as functions of the distance to the center of the immersed nanoparticle for different temperatures of the system. We observe that the assembly of ferroelectric nanoparticles enhances the nematic order in the LC medium changing many properties of its host above the nematic-isotropic transition temperature T (*) (NI) .

Two- and three-dimensional profilometer assessments to determine titanium roughness.

In this study, a comparative topography analysis of titanium (Ti) surfaces was performed using two- (2D) and three-dimensional (3D) profilometers. Ti samples were either only sandblasted (SB) using Al(2)O(3) particles or were SB and received an additional chemical treatment using a solution of 4% HF (SLA). Samples with no treatment were used as a control group (C). Therefore, three different surfaces were evaluated: SB, SLA and C. The Ti surface topographies were evaluated by scanning electron microscopy. An Ra roughness measurement was performed on each Ti sample by 2D and 3D profilometers. Surface roughness was also characterized using amplitude, spatial and hybrid 3D parameters. 2D and 3D profilometer analyses produced very close results. Mean Ra values range from 0.19 to 0.25 (C, p<0.05), 0.84 to 0.99 (SLA, p<0.05) and 0.98 to 1 microm (SB, p>0.05). The statistically different Ra values depending on the surface studied may be explained by methodological and technical differences. Also, 3D profilometer seems to be the more appropriate analytical method for measuring the roughness of Ti surfaces because it also describes surface organization.

Homeotropic surface anchoring and the layer-thinning transition in free-standing films.

In this work, we investigate the interplay between surface anchoring and finite-size effects on the smectic-isotropic transition in free-standing smectic films. Using an extended McMillan model, we study how a homeotropic anchoring stabilizes the smectic order above the bulk transition temperature. In particular, we determine how the transition temperature depends on the surface ordering and film thickness. We identify a characteristic anchoring for which the transition temperature does not depend on the film thickness. For strong surface ordering, we found that the thickness dependence of the transition temperature can be well represented by a power-law relation. The power-law exponent exhibits a weak dependence on the range of film thicknesses, as well as on the molecular alkyl tail length. Our results reproduce the main experimental findings concerning the layer-thinning transitions in free-standing smectic films.

High concentration of residual aluminum oxide on titanium surface inhibits extracellular matrix mineralization.

In the present study we characterized titanium (Ti) surfaces submitted to different treatments and evaluated the response of osteoblasts derived from human alveolar bone to these surfaces. Five different surfaces were evaluated: ground (G), ground and chemical etched (G1-HF for 60 s), sand blasted (SB-Al(2)O(3) particles 65 mum), sand blasted and chemical etched (SLA1-HF for 60 s and SLA2-HF for 13 s). Surface morphology was evaluated under SEM and roughness parameters by contact scanning instrument. The presence of Al(2)O(3) was detected by EDS and the amount calculated by digital analyses. Osteoblasts were cultured on these surfaces and it was evaluated: cell adhesion, proliferation, and viability, alkaline phosphatase activity, total protein content, and matrix mineralization formation. Physical and chemical treatments produced very different surface morphologies. Al(2)O(3) residues were detected on SB and SLA2 surfaces. Only matrix mineralization formation was affected by different surface treatments, being increased on rough surface (SLA1) and reduced on surface with high amount of Al(2)O(3) residues (SB). On the basis of these findings, it is possible to conclude that high concentration of residual Al(2)O(3) negatively interfere with the process of matrix mineralization formation in contact with Ti implant surfaces.