RESUMEN
Novel anode materials for lithium-ion batteries were synthesized by in situ growth of spheres of graphene and carbon nanotubes (CNTs) around silicon particles. These composites possess high electrical conductivity and mechanical resiliency, which can sustain the high-pressure calendering process in industrial electrode fabrication, as well as the stress induced during charging and discharging of the electrodes. The resultant electrodes exhibit outstanding cycling durability (â¼90% capacity retention at 2 A g-1 after 700 cycles or a capacity fading rate of 0.014% per cycle), calendering compatibility (sustain pressure over 100 MPa), and adequate volumetric capacity (1006 mAh cm-3), providing a novel design strategy toward better silicon anode materials.
RESUMEN
The conformal integration of electronic systems with irregular, soft objects is essential for many emerging technologies. We report the design of van der Waals thin films consisting of staggered two-dimensional nanosheets with bond-free van der Waals interfaces. The films feature sliding and rotation degrees of freedom among the staggered nanosheets to ensure mechanical stretchability and malleability, as well as a percolating network of nanochannels to endow permeability and breathability. With an excellent mechanical match to soft biological tissues, the freestanding films can naturally adapt to local surface topographies and seamlessly merge with living organisms with highly conformal interfaces, rendering living organisms with electronic functions, including leaf-gate and skin-gate transistors. On-skin transistors allow high-fidelity monitoring and local amplification of skin potentials and electrophysiological signals.
RESUMEN
Integrating light-harvesting materials with microbial biochemistry is a viable approach to produce chemicals with high efficiency from the air, water, and sunlight. Yet it remains unclear whether all absorbed photons in the materials can be transferred through the material-biology interface for solar-to-chemical production and whether the presence of materials beneficially affect the microbial metabolism. Here we report a microbe-semiconductor hybrid by interfacing CO2/N2-fixing bacterium Xanthobacter autotrophicus with CdTe quantum dots for light-driven CO2 and N2 fixation with internal quantum efficiencies of 47.2 ± 7.3% and 7.1 ± 1.1%, respectively, reaching the biochemical limits of 46.1% and 6.9% imposed by the stoichiometry in biochemical pathways. Photophysical studies suggest fast charge-transfer kinetics at the microbe-semiconductor interfaces, while proteomics and metabolomics indicate a material-induced regulation of microbial metabolism favoring higher quantum efficiencies compared to the biological counterparts alone.
RESUMEN
Microbial fuel cells (MFCs) can directly convert the chemical energy stored in organic matter to electricity and are of considerable interest for power generation and wastewater treatment. However, the current MFCs typically exhibit unsatisfactorily low power densities that are largely limited by the sluggish transmembrane and extracellular electron-transfer processes. Here, we report a rational strategy to boost the charge-extraction efficiency in Shewanella MFCs substantially by introducing transmembrane and outer-membrane silver nanoparticles. The resulting Shewanella-silver MFCs deliver a maximum current density of 3.85 milliamperes per square centimeter, power density of 0.66 milliwatts per square centimeter, and single-cell turnover frequency of 8.6 × 105 per second, which are all considerably higher than those of the best MFCs reported to date. Additionally, the hybrid MFCs feature an excellent fuel-utilization efficiency, with a coulombic efficiency of 81%.
Asunto(s)
Fuentes de Energía Bioeléctrica , Nanopartículas del Metal , Shewanella/metabolismo , Plata , Biopelículas , Espectroscopía Dieléctrica , Impedancia Eléctrica , Electricidad , Electrodos , Electrones , Grafito , Shewanella/ultraestructuraRESUMEN
Three-dimensional (3D) hepatocyte microtissues (MT), also known as spheroids, have proven to be advantageous in providing more accurate information and physiologically relevant and predictive data for liver-related in vivo tests; therefore, spheroids have increasingly been used to study hepatotoxicity, drug delivery to the liver, and tissue engineering. However, variabilities in the generation of 3D MT remain a major challenge. Methods that encapsulate and protect hepatocytes offer a promising pathway in prolonging cell survival, as well as maintaining its liver cell functions. Herein, we studied the encapsulation and resultant protective effects of hydrogen bonded, biocompatible polymer coatings for hepatocyte MT in 3D cell culture. We exposed the MT to hepatotoxic nanomaterials (NMs), such as graphene oxide (GO) and cobalt oxide (Co3O4), to assess the protective effects of poly(vinylpyrrolidone) (PVPON) and tannic acid (TA) coatings. The polymer coating allowed the MT to maintain its morphology. More significantly, it increased the viability of hepatocyte-composed MT by hampering the cellular interaction between hostile NMs and hepatocytes. Based on alanine transaminase (ALT) and aspartate aminotransferase (AST) levels, the liver cell function was maintained throughout the coating process, including after NM treatment. The study provides a straightforward and safe methodology for maintaining the morphology as well as cellular function of hepatocyte MT in vitro.
Asunto(s)
Hepatocitos/efectos de los fármacos , Hígado/efectos de los fármacos , Polímeros/farmacología , Ingeniería de Tejidos , Animales , Supervivencia Celular/efectos de los fármacos , Hepatocitos/metabolismo , Hepatocitos/patología , Hígado/metabolismo , Hígado/patología , RatonesRESUMEN
The ultrasound-assisted ionic liquid foam flotation solid-phase extraction of sulfonylurea herbicides in milk was developed and validated. The proteins and lipids were isolated from the sample matrix by adding salt and adjusting the pH value. The target analytes eluted from the solid-phase extraction cartridge were determined by high-performance liquid chromatography. Some experimental parameters, including the pH value of sample solution, amount of NaCl, ionic liquid type, extraction time, flow rate of carrier gas, flotation time, and solid-phase extraction cartridge type were investigated and optimized. Under the optimized experimental conditions, the limits of detection for metsulfuron, pyrazosulfuron, chlorimuron-ethyl, and nicosulfuron were 1.3, 0.6, 0.7, and 1.1 µg/L, respectively. When the present method was applied to the analysis of milk samples the recoveries of the analytes ranged from 84.3 to 105.2% and relative standard deviations were >5.7%.
RESUMEN
Dispersive microsolid-phase extraction based on metal-organic framework has been developed and applied to the extraction of triazine and phenylurea herbicides in vegetable oils in this work. The herbicides were directly extracted with MIL-101 from diluted vegetables oils without any further cleanup. The separation and determination of herbicides were carried out on high performance liquid chromatography. The effects of experimental parameters, including volume ratio of n-hexane to oil sample, mass of MIL-101, extraction time, centrifugation time, eluting solvent, and elution time were investigated. The Student's t test was applied to evaluate the selected experimental conditions. The limits of detection for the herbicides ranged from 0.585 to 1.04 µg/L. The recoveries of the herbicides ranged from 87.3 to 107%. Our results showed that the present method is rapid, simple, and effective for extracting herbicides in vegetable oils.
Asunto(s)
Complejos de Coordinación/química , Herbicidas/aislamiento & purificación , Compuestos de Fenilurea/aislamiento & purificación , Aceites de Plantas/química , Extracción en Fase Sólida/métodos , Triazinas/aislamiento & purificación , Contaminación de Alimentos/análisis , Herbicidas/análisis , Límite de Detección , Estructuras Metalorgánicas , Metales/química , Compuestos de Fenilurea/análisis , Extracción en Fase Sólida/instrumentación , Triazinas/análisisRESUMEN
The ultrasound-assisted ionic liquid-based homogeneous liquid-liquid microextraction has been developed and applied to the extraction of four tanshinones, including dihydrotanshinone, tanshinone I, cryptotanshinone and tanshinone IIA in Salvia miltiorrhiza Bge. root. High performance liquid chromatography was applied to the separation and determination of the analytes. The ionic liquid was used as extraction solvent and target analytes were extracted with help of ultrasound. Then, ion-pairing agent was added into the sample solution, which resulted in the formation of water-insoluble ionic liquid in the solution. The phase separation was performed by centrifugation. The extraction, concentration and purification of target analytes were performed simultaneously. The experimental parameters, including type and volume of ionic liquid, sample amount, the size of sample particle, pH value of extraction medium, extraction temperature, extraction time, amount of ion-pairing agent and centrifuging time, were investigated and optimized. The calibration curves showed good linear relationship (r>0.9997). The limits of detection and quantification were in the range of 0.052-0.093 and 0.17-0.31 µg mL(-1), respectively. The recoveries were between 70.45% and 94.23% with relative standard deviations lower than 5.31%. The present method is free of volatile organic solvents, and represents lower expenditures of sample, extraction time and solvent, compared with UAE and HRE. There was no obvious difference in the extraction yields of active constitutions obtained by the three extraction methods.
Asunto(s)
Abietanos/análisis , Medicamentos Herbarios Chinos/análisis , Extractos Vegetales/química , Raíces de Plantas/química , Salvia miltiorrhiza/química , Cromatografía Líquida de Alta Presión/métodos , Microextracción en Fase Líquida/métodos , Fenantrenos/análisis , Ultrasonido/métodosRESUMEN
A simple extraction method based on acetonitrile-K2HPO4 aqueous two-phase system was developed for separation and enrichment of five triazines in milk samples. Acetonitrile was used for extraction of analytes from milk sample and precipitation of milk protein. Deproteinization and extraction were achieved in one single step. Analytes were extracted into the upper phase of the aqueous two-phase system. The parameters affecting the extraction efficiency, such as the volume of acetonitrile, the type and amount of salts, pH value of sample and extraction time were investigated. The limits of detection of atraton, desmetryn, atrazine, terbumeton and terbuthylazine were 2.1, 2.6, 2.3, 2.8 and 2.5µg/L, respectively. When the present method was applied to the analysis of real milk samples, the recoveries of analytes ranged from 86.3 to 120.6% and relative standard deviations were lower than 7.9%.
Asunto(s)
Cromatografía Líquida de Alta Presión/métodos , Herbicidas/análisis , Leche/química , Triazinas/análisis , Animales , Concentración de Iones de Hidrógeno , Límite de Detección , Reproducibilidad de los Resultados , Espectrofotometría UltravioletaRESUMEN
In situ ionic-liquid-dispersive liquid-liquid microextraction was introduced for extracting Sudan dyes from different liquid samples followed by detection using ultrafast liquid chromatography. The extraction and metathesis reaction can be performed simultaneously, the extraction time was shortened notably and higher enrichment factors can be obtained compared with traditional dispersive liquid-liquid microextraction. When the extraction was coupled with ultrafast liquid chromatography, a green, convenient, cheap, and efficient method for the determination of Sudan dyes was developed. The effects of various experimental factors, including type of extraction solvent, amount of 1-hexyl-3-methylimidazolium chloride, ratio of ammonium hexafluorophosphate to 1-hexyl-3-methylimidazolium chloride, pH value, salt concentration in sample solution, extraction time and centrifugation time were investigated and optimized for the extraction of four kinds of Sudan dyes. The limits of detection for Sudan I, II, III, and IV were 0.324, 0.299, 0.390, and 0.655 ng/mL, respectively. Recoveries obtained by analyzing the seven spiked samples were between 65.95 and 112.82%. The consumption of organic solvent (120 µL acetonitrile per sample) was very low, so it could be considered as a green analytical method.