Magnetic quaternary ammonium polymer bearing porous agarose for selective extraction of Aristolochic acids in the plasma.

Aristolochic acids (AAs) naturally occurring in the herbal genus Aristolochia are associated with a high risk of kidney failure, multiple tumors and cancers. However, approaches with high selectivity and rapidity for measuring AAs in biological samples are still inadequate. Inspired by the mechanism of AAs-induced nephrotoxicity, we designed a hybrid magnetic polymer-porous agarose (denoted as MNs@SiO2M@DNV-A), mimicking the effect of basic and aromatic residues of organic anion transporter 1 (OAT1) for efficient enriching aristolochic acid I (AA I) and aristolochic acid II (AA II) in the plasma. The monomers of vinylbenzyl trimethylammonium chloride (VBTAC), N-vinyl-2-pyrrolidinone (NVP) and divinylbenzene (DVB) were employed to construct the polymer layer, which provided a selective adsorption for AAs by multiple interactions. The porous agarose shell contributed to remove interfering proteins in the plasma samples. A magnetic solid-phase extraction (MSPE) based on the proposed composite enhanced the selectivity toward AA I and AA II in the plasma samples. In combination of HPLC analysis, the proposed method was proved to be applicable to fast and specific quantification of AAs in blood samples, which was characterized by a good linearity, high sensitivity, acceptable recovery, excellent repeatability and satisfactory reusability.

Ionizable copolymer functionalized magnetic nanocomposite as an adsorbent for boosting the extraction selectivity of aristolochic acids.

Aristolochic acid nephropathy (AAN) has drawn increasing public attention. Organic anion transporters (OATs) are considered to be responsible for mediating nephrotoxicity of aristolochic acids (AAs), as AAs are typical OAT1 substrates that exhibit anionic properties and contain one hydrophobic domain. Inspired by the OAT1 three-dimensional structure or substrate/protein interactions involved in transport, we designed a magnetic polymeric hybrid, mimicking the effect of basic and aromatic residues of OAT1, for efficient enriching aristolochic acid I (AA I) and aristolochic acid II (AA II) in Traditional Chinese patent medicines (TCPM). N, N-dimethylaminopropyl acrylamide (DMAPAm) was used as a cationic monomer and copolymerized with divinylbenzene (DVB) onto the surface of monodisperse magnetic nanoparticles (denoted as MNs@SiO2T-DvbDam). The magnetic polymer hybrid demonstrated high selectivity and capacity for AAs, which was mainly attributed to (1) electrostatic interactions from the cationic or basic moiety of DMAPAm and (2) the hydrophobic and π-π stacking interactions from the aromatic ring of DVB. Additionally, the surface of the hybrid exhibited amphiphilic property according to the ionization of DMAPAm, thus improving the compatibility of the adsorbent with the aqueous sample matrix. This strategy was proven to be robust in the analysis of real drug samples, which was characterized by a good linearity, high recovery and satisfactory reusability. This work confirmed that the proposed tool could be a promising candidate for enhancing the extraction selectivity of AAs in Traditional Chinese medicines (TCM).

Hybridization-based discovery of novel quinazoline-2-indolinone derivatives as potent and selective PI3Kα inhibitors.

INTRODUCTION: Phosphatidylinositol 3-kinases (PI3Ks) overexpression can elicit cellular homeostatic dysregulation, which further contributes to tumorigenesis, with PI3Kα emerging as the most prevalent mutant isoform kinase among PI3Ks. Therefore, selective inhibitors targeting PI3Kα have attracted considerable interest in recent years. Molecular hybridization, with the advantage of simplified pharmacokinetics and drug-drug interactions, emerged as one of the important avenues for discovering potential drugs. OBJECTIVES: This study aimed to construct PI3Kα inhibitors by hybridization and investigate their antitumor activity and mechanism. METHODS: 26 quinazoline-2-indolinone derivatives were obtained by molecular hybridization, and their structure-activity relationship was analyzed by MTT, in vitro kinase activity and molecular docking. The biological evaluation of compound 8 was performed by transwell, flow cytometry, laser scanning confocal microscopy, Western blot, CTESA and immunohistochemistry. RESULTS: Here, we employed molecular hybridization methods to construct a series of quinazoline-2-indolinone derivatives as PI3Kα selective inhibitors. Encouragingly, representative compound 8 exhibited a PI3Kα enzymatic IC50 value of 9.11 nM and 10.41/16.99/37.53-fold relative to the biochemical selectivity for PI3Kß/γ/δ, respectively. Moreover, compound 8 effectively suppressed the viability of B16, HCT116, MCF-7, H22, PC-3, and A549 cells (IC50 values: 0.2 µM âˆ¼ 0.98 µM), and dramatically inhibited the proliferation and migration of NSCLC cells, as well as induced mitochondrial apoptosis through the PI3K/Akt/mTOR pathway. Importantly, compound 8 demonstrated potent in vivo anti-tumor activity in non-small cell lung cancer mouse models without visible toxicity. CONCLUSIONS: This study presented a new avenue for the development of PI3Kα inhibitors and provided a solid foundation for novel QHIDs as potential future therapies for the treatment of NSCLC.

Metabolomics Analysis and Diagnosis of Lung Cancer: Insights from Diverse Sample Types.

Lung cancer is a highly fatal disease that poses a significant global health burden. The absence of characteristic clinical symptoms frequently results in the diagnosis of most patients at advanced stages of lung cancer. Although low-dose computed tomography (LDCT) screening has become increasingly prevalent in clinical practice, its high rate of false positives continues to present a significant challenge. In addition to LDCT screening, tumor biomarker detection represents a critical approach for early diagnosis of lung cancer; unfortunately, no tumor marker with optimal sensitivity and specificity is currently available. Metabolomics has recently emerged as a promising field for developing novel tumor biomarkers. In this paper, we introduce metabolic pathways, instrument platforms, and a wide variety of sample types for lung cancer metabolomics. Specifically, we explore the strengths, limitations, and distinguishing features of various sample types employed in lung cancer metabolomics research. Additionally, we present the latest advances in lung cancer metabolomics research that utilize diverse sample types. We summarize and enumerate research studies that have investigated lung cancer metabolomics using different metabolomic sample types. Finally, we provide a perspective on the future of metabolomics research in lung cancer. Our discussion of the potential of metabolomics in developing new tumor biomarkers may inspire further study and innovation in this dynamic field.

Novel sulfonyl-substituted tetrandrine derivatives for colon cancer treatment by inducing mitochondrial apoptosis and inhibiting PI3K/AKT/mTOR pathway.

Tetrandrine (TET) possesses multiple pharmacological activities and could suppress tumor proliferation via PI3K pathway inhibition. However, inferior antitumor activity and potential toxicity limit its clinical application. In the present study, a series of 14-sulfonamide and sulfonate TET derivatives were designed, synthesized, and evaluated for biological activities. Through structural-activity relationship studies, compound 3c with α, ß-unsaturated carbonyl group exhibited the most potent activity against all tested tumor cell lines (including Hela, HCT116, HepG2, MCF-7, and SHSY5Y), as well as negligible toxicity against normal cell lines LO2 and HEK293. Additionally, compound 3c effectively inhibited HCT116 and CT26 cell proliferation in vitro with increased cell proportion in the G2/M phase, activated the mitochondrial apoptosis pathway, and induced colon cancer cell apoptosis by suppressing the PI3K/AKT/mTOR pathway. The further molecular docking results confirmed that compound 3c is potentially bound to multiple residues in PI3K with a stronger binding affinity than TET. Ultimately, compound 3c dramatically suppressed tumor growth in the CT26 xenograft tumor model, without noticeable visceral toxicity detected in the high-dose group. In summary, compound 3c might present new insights for designing new PI3K inhibitors and be a potential candidate for colon cancer treatment.

Amphiphilic copolymers grafted on monodisperse magnetic microspheres as an efficient adsorbent for the extraction of safrole in the plasma.

Polystyrene (PS) microsphere is a kind of attractive extracting medium due to its high stability in different matrices and its particle size can be controlled. The attachment of amphiphilic copolymers to the PS microsphere surface can overcome the drawback of PS relevant to its hydrophobic nature and low wettability. In our previous work, the magnetic composite based on PS microsphere (5 µm) and poly (divinylbenzene-co-N-vinylpyrrolidone, DVB-co-NVP) shell was successfully fabricated and applied for the extraction of safrole in cola drinks. However, the large size and ease of sedimentation limited its application in the enrichment of safrole from blood samples. Considering the adjustability of PS microsphere size, we synthesized the porous PS microspheres with the uniform size of 3 µm and then functionalized with Fe3O4 nanoparticles and poly (DVB-co-NVP) layer in this work. Using the proposed material as extraction sorbent, a simple and fast magnetic solid phase extraction (MSPE) method coupled with HPLC was developed for quantification of safrole in the plasma. Under the optimized conditions, the response to safrole was linear in the range of 0.02-12 µg mL-1, and the limit of detection (LOD) was 0.006 µg mL-1. Satisfactory recoveries were obtained between 85.67% and 97.74% (spiked at 0.05, 0.2, 2 µg mL-1) and the relative standard deviations (RSDs) for the above spiked levels of the analyte were below 3.9% (n = 6). The adsorbent can be reused for 6 cycles without a significant loss of extraction capability.

Fabrication of functionalized magnetic microspheres based on monodispersed polystyrene for quantitation of allyl-benzodioxoles coupled with gas chromatography and mass spectrometry.

Monodispersed magnetic microspheres were synthesized by the magnetization of the aminized polystyrene cores and the subsequent polymerization of allyl glycidyl ether, divinylbenzene and N-vinyl-2-pyrrolidone, which exhibited excellent monodispersity in aqueous solution and high efficiency for allyl-benzodioxoles extraction. Various techniques, including scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FT-IR) and vibrating sample magnetometry (VSM) were employed to characterize the composites. Coupled with gas chromatography-mass spectrometry (GC-MS), a sensitive and simple magnetic solid phase extraction (MSPE) procedure based on the prepared microspheres was established for determination of allyl-benzodioxoles in cola-flavoured drinks. The factors affecting the extraction procedure, such as pH value, adsorbent amount, adsorption time, desorption solution and desorption time were optimized. The developed method was characterized by a high recovery (spiked at 5 µg L-1, 25 µg L-1 and 250 µg L-1), a low detection limit (0.05 µg L-1 for safrole and 0.08 µg L-1 for myristicin), a good linearity (correlation coefficients higher than 0.9990 for both) and a satisfactory repeatability (relative standard deviation below 3.7% for both, n = 3). The approach proposed here was confirmed to be fast and reliable for quantitative analysis of allyl-benzodioxoles in cola samples, especially at a trace level.

The synthesis of Zr-metal-organic framework functionalized magnetic graphene nanocomposites as an adsorbent for fast determination of multi-pesticide residues in tobacco samples.

In this paper, a simple and reliable method has been established to determine the residues of nine pesticides in tobacco by using GC-MS coupled with magnetic solid phase extraction. A novel magnetic Zr-MOF nanocomposite based on graphene was synthesized, and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FT-IR), Raman spectroscopy and N2 adsorption-desorption measurements. The prepared material has the advantage of large surface area (178 m2/g), good magnetic response and high thermal stability, which is shown to be suited for the fast enrichment of multi-pesticides in tobacco matrix. The extraction conditions including amount of adsorbent, adsorption time, eluting solvent as well as desorption time were investigated. The whole process of pretreatment is accomplished within 10 min. This method shows low limit of detection, wide linear range and good reproducibility (relative standard deviations <12.7%), satisfactory recoveries were obtained, ranging from 57.9% to 126.3% for tobacco samples.

Magnetic solid-phase extraction of phthalate esters (PAEs) in apparel textile by core-shell structured Fe3O4@silica@triblock-copolymer magnetic microspheres.

In this paper, novel core-shell structured magnetic Fe3O4/silica nanocomposites with triblock-copolymer grafted on their surface (Fe3O4@SiO2@MDN) were successfully fabricated by combining a sol-gel method with a seeded aqueous-phase radical copolymerization approach. Owing to the excellent characteristics of the strong magnetic responsivity, outstanding hydrophilicity and abundant π-electron system, the obtained core-shell structured microspheres showed great potential as a magnetic solid phase extraction (MSPE) adsorbent. Several kinds of phthalate esters (PAEs) were selected as model analytes to systematically evaluate the applicability of adsorbents for extraction followed by gas chromatography-mass spectrometry (GC-MS) analyses. Various parameters, including adsorbents amounts, adsorption time, species of eluent, and desorption time were optimized. Under the optimized conditions, Validation experiments such as recovery, reproducibility, and limit of detection were carried on and showed satisfactory results. The analysis method showed excellent linearity with a wide range of 0.2-10mg/kg (R(2)>0.9974) and low limits of detection (LOD) of 0.02-0.09 mg/kg (S/N=3). Ultimately, the novel magnetic adsorbents were successfully employed to detect the PAEs in apparel textile samples. And the results indicated that this novel approach brought forward in the present work offered an attractive alternative for rapid, efficient and sensitive MSPE for PAEs compounds.

Derivatization followed by gas chromatography-mass spectrometry for quantification of ethyl carbamate in alcoholic beverages.

A sensitive and rapid analytical methodology based on derivatization followed by gas chromatography-mass spectrometry (GC-MS) was developed for the quantitative determination of the toxic contaminant ethyl carbamate (EC, urethane, C(2)H(5)OCONH(2)) in alcoholic samples. EC was extracted using liquid-liquid extraction technique, and then silylated with bis-(trimethylsilyl)trifluoroacetamide, analysed finally by GC-MS. The isopropyl carbamate was used as the internal standard for quantitative analysis of EC in alcoholic samples. In this work, the sample extraction and derivatization reaction conditions were investigated, and the optimal extraction conditions obtained were: pH 9 and solvent of ethyl acetate, and the derivatization conditions were: derivatization reaction temperature of 80°C and time duration of 30 min. With the optimal conditions, the method validations were also studied. In the validation studies, EC exhibited good linearity with a regression coefficient of 0.9999. The limit of detection and limit of quantification were 0.30 and 5.0 µg/kg, respectively. The precision was less than 8.4%. Finally, the proposed technique was successfully applied to the analysis of EC in 35 kinds of alcoholic samples. The experimental results have demonstrated that the proposed technique is a fast, reliable and low-cost method for determination of EC in alcoholic samples.