RESUMEN
Helicene-derived 2,2'-bipyridine N-monoxide was evaluated as a Lewis base catalyst for the enantioselective propargylation of N-acylhydrazones with allenyltrichlorosilane. The helicene-derived catalyst provided moderate-to-good reactivity and enantioselectivity for a range of acylhydrazones. This study represents the first example of the catalytic asymmetric propargylation of non-activated acylhydrazones.
RESUMEN
The synthesis and structures of nitrile complexes of V(N[tBu]Ar)3, 2 (Ar = 3,5-Me2C6H3), are described. Thermochemical and kinetic data for their formation were determined by variable temperature Fourier transform infrared (FTIR), calorimetry, and stopped-flow techniques. The extent of back-bonding from metal to coordinated nitrile indicates that electron donation from the metal to the nitrile plays a less prominent role for 2 than for the related complex Mo(N[tBu]Ar)3, 1. Kinetic studies reveal similar rate constants for nitrile binding to 2, but the activation parameters depend critically on the nature of R in RCN. Activation enthalpies range from 2.9 to 7.2 kcal·mol-1, and activation entropies from -9 to -28 cal·mol-1·K-1 in an opposing manner. Density functional theory (DFT) calculations provide a plausible explanation supporting the formation of a π-stacking interaction between a pendant arene of the metal anilide of 2 and the arene substituent on the incoming nitrile in favorable cases. Data for ligand binding to 1 do not exhibit this range of activation parameters and are clustered in a small area centered at ΔH = 5.0 kcal·mol-1 and ΔS = -26 cal·mol-1·K-1. Computational studies are in agreement with the experimental data and indicate a stronger dependence on electronic factors associated with the change in spin state upon ligand binding to 1.
RESUMEN
A new strategy to effectively lock the conformation of substituents at the 3,3'-positions of axial-chiral biisoquinoline N,N'-dioxides was developed based on the strong dipole-dipole interaction between 1,2,3-triazole and pyridine N-oxide rings. The crystal structure and the DFT calculations of 3,3'-bis(1-benzyl-1H-1,2,3-triazole-4-yl)-1,1'-biisoquinoline N,N'-dioxide (3a) provided strong support for this strategy. Furthermore, we successfully demonstrated that readily available 4-trimethylsilyl-1,2,3-triazoles are viable nucleophiles for Hiyama cross-coupling.
RESUMEN
The catalytic enantioselective ketimine Mannich and its related reactions provide direct access to chiral building blocks bearing an α-tertiary amine stereogenic center, a ubiquitous structural motif in nature. Although ketimines are often viewed as challenging electrophiles, various approaches/strategies to circumvent or overcome the adverse properties of ketimines have been developed for these transformations. This review showcases the selected examples that highlight the benefits and utilities of various ketimines and remaining challenges associated with them in the context of Mannich, allylation, and aza-Morita-Baylis-Hillman reactions as well as their variants.
RESUMEN
The rate and mechanism of the elimination of N2O from trans-R3Sn-O-NâN-O-SnR3 (R = Ph (1Ph) and R = Cy (1Cy)) to form R3Sn-O-SnR3 (R = Ph (2Ph) and R = Cy (2Cy)) have been studied using both NMR and IR techniques to monitor the reactions in the temperature range of 39-79 °C in C6D6. Activation parameters for this reaction are ΔH⧧ = 15.8 ± 2.0 kcal·mol-1 and ΔS⧧ = -28.5 ± 5 cal·mol-1·K-1 for 1Ph and ΔH⧧ = 22.7 ± 2.5 kcal·mol-1 and ΔS⧧ = -12.4 ± 6 cal·mol-1·K-1 for 1Cy. Addition of O2, CO2, N2O, or PPh3 to sealed tube NMR experiments did not alter in a detectable way the rate or product distribution of the reactions. Computational DFT studies of elimination of hyponitrite from trans-Me3Sn-O-NâN-O-SnMe3 (1Me) yield a mechanism involving initial migration of the R3Sn group from O to N passing through a marginally stable intermediate product and subsequent N2O elimination. Reactions of 1Ph with protic acids HX are rapid and lead to formation of R3SnX and trans-H2N2O2. Reaction of 1Ph with the metal radical â¢Cr(CO)3C5Me5 at low concentrations results in rapid evolution of N2O. At higher â¢Cr(CO)3C5Me5 concentrations, evolution of CO2 rather than N2O is observed. Addition of 1 atm or less CO2 to benzene or toluene solutions of 2Ph and 2Cy resulted in very rapid reaction to form the corresponding carbonates R3Sn-O-C(âO)-O-SnR3 (R = Ph (3Ph) and R = Cy (3Cy)) at room temperature. Evacuation results in fast loss of bound CO2 and regeneration of 2Ph and 2Cy. Variable temperature data for formation of 3Cy yield ΔHo = -8.7 ± 0.6 kcal·mol-1, ΔSo = -17.1 ± 2.0 cal·mol-1·K-1, and ΔGo298K = -3.6 ± 1.2 kcal·mol-1. DFT studies were performed and provide additional insight into the energetics and mechanisms for the reactions.
RESUMEN
Ball milling of sodium oxides and alkali metal halide salts under a pressure of 2 atm nitrous oxide at temperatures of 38 ± 4 °C is reported. After 2.5 h of ball milling, FTIR data for both 14N2O and 15N2O additions show conclusively that cis-Na2N2O2 is formed based on excellent agreement with data reported earlier by Jansen and Feldmann who prepared pure crystalline cis-Na2N2O2 by reaction of sodium oxide and nitrous oxide for 2 h at 360 °C in a tube furnace. Continued ball milling under nitrous oxide leads to slow buildup of NaNO3 with yields on the order of 24% achieved in 20 h. Production of nitrate only occurs during active ball milling. Studies over the first 10 h reveal a trend among potassium halide salts: KBr â KCl > KI â« KF. Ball milling of sodium oxide alone under an atmosphere of N2O gives much lower yields than ball milling in the presence of added alkali metal halide salt. Ball milling of sodium oxide and nitrous oxide in fluorocarbon oil, silicone oil, calcium fluoride, clinoptilolite, molecular sieves, and silica gel does not lead to significant yields of either cis-Na2N2O2 or NaNO3.
RESUMEN
While oxidized pillar[5]arenes with 1-5 benzoquinone units are known, very few examples of oxidized pillar[6]arenes have been reported. We describe here the synthesis, characterization and electrochemical behavior of a series of macrocyclic hosts prepared by the stepwise oxidation of 1,4-diethoxypillar[6]arene, resulting in high-yield and high-purity isolation of two constitutional isomers for each macrocycle, in which two, three or four 1,4-diethoxybenzene units are replaced by benzoquinone residues. A careful structural comparison with their counterparts in the pillar[5]arene framework indicates that the geometries of the macrocycles are better described as non-Euclidean hyperbolic hexagons and elliptic pentagons, respectively. A comprehensive computational study to determine anisotropic induced current density (ACID) allows us to visualize and quantify through-space and through-bond communication pathways along the macrocyclic belt. Experimental and simulated voltammetric data, as well as UV-vis spectra, of the new macrocycles afford insights into the various electronic communication pathways in these compounds.
RESUMEN
A borondipyrromethene (BODIPY) chromophore is connected to a benzoxazole, benzothiazole, or nitrobenzothiazole heterocycle through an olefinic bridge with trans configuration. Rotation about the two [C-C] bonds flanking the olefinic bridge occurs with fast kinetics in solution, leading to the equilibration of four conformational isomers for each compound. Ensemble spectroscopic measurements in solutions fail to distinguish the coexisting isomers. They reveal instead averaged absorption and emission bands with dependence of the latter on the excitation wavelength. Using high-throughput single-molecule spectroscopy, two main populations of single molecules with distinct spectral centroids are observed for each compound on glass substrates. Computational analyses suggest the two populations of molecules to be conformational isomers with antiperiplanar and periplanar arrangements of the BODIPY chromophores about its [C-C] bond to the olefinic bridge. Thus, statistical analysis of multiple single-molecule emission spectra can discriminate stereoisomers that would otherwise be impossible to distinguish by ensemble measurements alone.
RESUMEN
As the inhibitory γ-aminobutyric acid-ergic (GABAergic) transmission has a pivotal role in the central nervous system (CNS) and defective forms of its synapses are associated with serious neurological disorders, numerous versions of caged GABA and, more recently, photoswitchable ligands have been developed to investigate such transmission. While the complementary nature of these probes is evident, the mechanisms by which the GABA receptors can be photocontrolled have not been fully exploited. In fact, the ultimate need for specificity is critical for the proper synaptic exploration. No caged allosteric modulators of the GABAA receptor have been reported so far; to introduce such an investigational approach, we exploited the structural motifs of the benzodiazepinic scaffold to develop a photocaged version of diazepam (CD) that was tested on basolateral amygdala (BLa) pyramidal cells in mouse brain slices. CD is devoid of any intrinsic activity toward the GABAA receptor before irradiation. Importantly, CD is a photoreleasable GABAA receptor-positive allosteric modulator that offers a different probing mechanism compared to caged GABA and photoswitchable ligands. CD potentiates the inhibitory signaling by prolonging the decay time of postsynaptic GABAergic currents upon photoactivation. Additionally, no effect on presynaptic GABA release was recorded. We developed a photochemical technology to individually study the GABAA receptor, which specifically expands the toolbox available to study GABAergic synapses.
Asunto(s)
Amígdala del Cerebelo/efectos de los fármacos , Diazepam/farmacología , Receptores de GABA-A/metabolismo , Sinapsis/metabolismo , Amígdala del Cerebelo/metabolismo , Animales , Ratones , Ratones Endogámicos C57BL , Células Piramidales/efectos de los fármacos , Células Piramidales/metabolismo , Potenciales Sinápticos/efectos de los fármacos , Transmisión Sináptica/efectos de los fármacos , Ácido gamma-Aminobutírico/metabolismoRESUMEN
A mechanism to photoactivate far-red/near-infrared fluorescence with infinite contrast and under mild visible illumination was designed around the photophysical properties of borondipyrromethene (BODIPY) dyes and the photochemical behavior of oxazine heterocycles. Specifically, the photoinduced and irreversible cleavage of an oxazine ring with a laser line at 405 nm extends the electronic conjugation of a BODIPY chromophore over a 3 H-indole auxochrome with a 2-(4-methoxyphenyl)ethenyl substituent in position 5. This structural transformation shifts bathochromically the main absorption band of the BODIPY component to allow the selective excitation of the photochemical product with a laser line of 633 nm and produce fluorescence between 600 and 850 nm. This combination of activation, excitation, and emission wavelengths permits the visualization of the cellular blastoderm of developing Drosophila melanogaster embryos with optimal contrast and essentially no autofluorescence from the biological specimen. Furthermore, the sequential acquisition of images, after the photoactivation event, enables the tracking of individual cells within the embryos in real time. Thus, our structural design and operating principles for the photoactivation of far-red/near-infrared fluorescence can evolve into invaluable probes to monitor cellular dynamics in vivo.
Asunto(s)
Compuestos de Boro/química , Colorantes Fluorescentes/química , Imagen Óptica/métodos , Pirroles/química , Animales , Drosophila melanogaster/embriología , Rayos Infrarrojos , Modelos Moleculares , Oxazinas/química , FotólisisRESUMEN
Reaction of [Pd(IPr)2] (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) and O2 leads to the surprising discovery that at low temperature the initial reaction product is a highly labile peroxide complex cis-[Pd(IPr)2(η2-O2)]. At temperatures â³ -40 °C, cis-[Pd(IPr)2(η2-O2)] adds a second O2 to form trans-[Pd(IPr)2(η1-O2)2]. Squid magnetometry and EPR studies yield data that are consistent with a singlet diradical ground state with a thermally accessible triplet state for this unique bis-superoxide complex. In addition to reaction with O2, cis-[Pd(IPr)2(η2-O2)] reacts at low temperature with H2O in methanol/ether solution to form trans-[Pd(IPr)2(OH)(OOH)]. The crystal structure of trans-[Pd(IPr)2(OOH)(OH)] is reported. Neither reaction with O2 nor reaction with H2O occurs under comparable conditions for cis-[Pd(IMes)2(η2-O2)] (IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene). The increased reactivity of cis-[Pd(IPr)2(η2-O2)] is attributed to the enthalpy of binding of O2 to [Pd(IPr)2] (-14.5 ± 1.0 kcal/mol) that is approximately one-half that of [Pd(IMes)2] (-27.9 ± 1.5 kcal/mol). Computational studies identify the cause as interligand repulsion forcing a wider C-Pd-C angle and tilting of the NHC plane in cis-[Pd(IPr)2(η2-O2)]. Arene-arene interactions are more favorable and serve to further stabilize cis-[Pd(IMes)2(η2-O2)]. Inclusion of dispersion effects in DFT calculations leads to improved agreement between experimental and computational enthalpies of O2 binding. A complete reaction diagram is constructed for formation of trans-[Pd(IPr)2(η1-O2)2] and leads to the conclusion that kinetic factors inhibit formation of trans-[Pd(IMes)2(η1-O2)2] at the low temperatures at which it is thermodynamically favored. Failure to detect the predicted T-shaped intermediate trans-[Pd(NHC)2(η1-O2)] for either NHC = IMes or IPr is attributed to dynamic effects. A partial potential energy diagram for initial binding of O2 is constructed. A range of low-energy pathways at different angles of approach are present and blur the distinction between pure "side-on" or "end-on" trajectories for oxygen binding.
RESUMEN
Fluorescent 3H-indolium cations are valuable components for the realization of activatable fluorophores for bioimaging applications. Their relatively poor fluorescent quantum yields in organic solvents, however, appear to be in contradiction to their good performance in analytical methods based on single-molecule detection. The elucidation of the structural factors governing the excitation dynamics of these compounds is, therefore, essential to rationalize these effects and possibly guide the future design of activatable probes with improved performance. In this context, the structural, photochemical and photophysical properties of a model compound, consisting of coumarin and 3H-indolium heterocycles separated by a [C-C[double bond, length as m-dash]C-C] bridge, were characterized with a combination of experimental and theoretical analyses. These studies demonstrate that the fast rotation about the [C-C] bond adjacent to the coumarin component competes with the radiative deactivation of the excited state in nonviscous environments. This geometrical change dislodges the coumarin and 3H-indolium cations out of planarity to allow the population of a weakly-emissive twisted intramolecular charge-transfer (TICT) state and produce fluorescence with low quantum yield. In viscous environments, the conformational change is slow and cannot compete effectively with the radiative deactivation of the excited state, which instead produces fluorescence with high quantum yield. These results indicate that structural modifications aimed at the restriction of the rotation of this [C-C] bond are essential to improve considerably the fluorescence quantum yield of this chromophoric platform. Should a synthetic strategy for the implementation of these design guidelines be identified, activatable fluorophores, based on the 3H-indolium platform, with improved brightness will ultimately emerge.
Asunto(s)
Indoles/química , Cationes/química , Cumarinas/química , Colorantes Fluorescentes/química , Estructura MolecularRESUMEN
The kinetics of the reaction of Ph3SnH with excess â¢Cr(CO)3C5Me5 = â¢Cr, producing HCr and Ph3Sn-Cr, was studied in toluene solution under 2-3 atm CO pressure in the temperature range of 17-43.5 °C. It was found to obey the rate equation d[Ph3Sn-Cr]/dt = k[Ph3SnH][â¢Cr] and exhibit a normal kinetic isotope effect (kH/kD = 1.12 ± 0.04). Variable-temperature studies yielded ΔH = 15.7 ± 1.5 kcal/mol and ΔS = -11 ± 5 cal/(mol·K) for the reaction. These data are interpreted in terms of a two-step mechanism involving a thermodynamically uphill hydrogen atom transfer (HAT) producing Ph3Sn⢠and HCr, followed by rapid trapping of Ph3Sn⢠by excess â¢Cr to produce Ph3Sn-Cr. Assuming an overbarrier of 2 ± 1 kcal/mol in the HAT step leads to a derived value of 76.0 ± 3.0 kcal/mol for the Ph3Sn-H bond dissociation enthalpy (BDE) in toluene solution. The reaction enthalpy of Ph3SnH with excess â¢Cr was measured by reaction calorimetry in toluene solution, and a value of the Sn-Cr BDE in Ph3Sn-Cr of 50.4 ± 3.5 kcal/mol was derived. Qualitative studies of the reactions of other R3SnH compounds with â¢Cr are described for R = nBu, tBu, and Cy. The dehydrogenation reaction of 2Ph3SnH â H2 + Ph3SnSnPh3 was found to be rapid and quantitative in the presence of catalytic amounts of the complex Pd(IPr)(P(p-tolyl)3). The thermochemistry of this process was also studied in toluene solution using varying amounts of the Pd(0) catalyst. The value of ΔH = -15.8 ± 2.2 kcal/mol yields a value of the Sn-Sn BDE in Ph3SnSnPh3 of 63.8 ± 3.7 kcal/mol. Computational studies of the Sn-H, Sn-Sn, and Sn-Cr BDEs are in good agreement with experimental data and provide additional insight into factors controlling reactivity in these systems. The structures of Ph3Sn-Cr and Cy3Sn-Cr were determined by X-ray crystallography and are reported. Mechanistic aspects of oxidative addition reactions in this system are discussed.
RESUMEN
The activation wavelength of a photochromic oxazine can be shifted bathochromically with the introduction of a methoxy substituent on the chromophore responsible for initiating the photochemical transformation. This structural modification permits switching under mild illumination conditions, enhances the photoisomerization quantum yield and ensures outstanding fatigue resistance. Thus, these results can guide the design of new members of this family of photoresponsive molecular switches with improved photochemical and photophysical properties.
RESUMEN
The complex Pt(IPr)(SnBu(t)3)(H) (1) was obtained from the reaction of Pt(COD)2 with Bu(t)3SnH and IPr [IPr = N,N'-bis(2,6-diisopropylphenyl)imidazol-2-ylidene]. Complex 1 undergoes exchange reactions with deuterated solvents (C6D6, toluene-d8, and CD2Cl2), where the hydride ligand and the methyl hydrogen atoms on the isopropyl group of the IPr ligand have been replaced by deuterium atoms. Complex 1 reacts with H2 gas reversibly at room temperature to yield the complex Pt(IPr)(SnBu(t)3)(H)3 (2). Complex 2 also undergoes exchange reactions with deuterated solvents as in 1 to deuterate the hydride ligands and the methyl hydrogen atoms on the isopropyl group of the IPr ligand. Complex 1 catalyzes the hydrogenation of styrene to ethylbenzene at room temperature. The reaction of 1 with 1 equiv of styrene at -20 °C yields the η(2)-coordinated product Pt(IPr)(SnBu(t)3)(η(2)-CH2CHPh)(H) (3), and with 2 equiv of styrene, it forms Pt(IPr)(η(2)-CH2CHPh)2 (4).
RESUMEN
The reaction of Pt(COD)2 with one equivalent of tri-tert-butylstannane, Bu(t)3SnH, at room temperature yields Pt(SnBu(t)3)(COD)(H)(3) in quantitative yield. In the presence of excess Bu(t)3SnH, the reaction goes further, yielding the dinuclear bridging stannylene complex [Pt(SnBu(t)3)(µ-SnBu(t)2)(H)2]2 (4). The dinuclear complex 4 reacts rapidly and reversibly with CO to furnish [Pt(SnBu(t)3)(µ-SnBu(t)2)(CO)(H)2]2 (5). Complex 3 reacts with N,N'-di-tert-butylimidazol-2-ylidene, IBu(t), at room temperature to give the dinuclear bridging hydride complex [Pt(SnBu(t)3)(IBu(t))(µ-H)]2 (6). Complex 6 reacts with CO, C2H4, and H2 to give the corresponding mononuclear Pt complexes Pt(SnBu(t)3)(IBu(t))(CO)(H)(7), Pt(SnBu(t)3)(IBu(t))(C2H4)(H)(8), and Pt(SnBu(t)3)(IBu(t))(H)3 (9), respectively. The reaction of IBu(t) with the complex Pt(SnBu(t)3)2(CO)2 (10) yielded an abnormal Pt-carbene complex Pt(SnBu(t)3)2(aIBu(t))(CO) (11). DFT computational studies of the dimeric complexes [Pt(SnR3)(NHC)(µ-H)]2, the potentially more reactive monomeric complexes Pt(SnR3)(NHC)(H) and the trihydride species Pt(SnBu(t)3)(IBu(t))(H)3 have been performed, for NHC = IMe and R = Me and for NHC = IBu(t) and R = Bu(t). The structures of complexes 3-8 and 11 have been determined by X-ray crystallography and are reported.
RESUMEN
An amphiphilic polymer with multiple decyl and oligo(ethylene glycol) chains attached to a common poly(methacrylate) backbone assembles into nanoscaled particles in aqueous environments. Hydrophobic anthracene and borondipyrromethene (BODIPY) chromophores can be co-encapsulated within the self-assembling nanoparticles and transported across hydrophilic media. The reversible character of the noncovalent bonds, holding the supramolecular containers together, permits the exchange of their components with fast kinetics in aqueous solution. Incubation of cervical cancer (HeLA) cells with a mixture of two sets of nanoparticles, pre-loaded independently with anthracene or BODIPY chromophores, results in guest scrambling first and then transport of co-entrapped species to the intracellular space. Alternatively, incubation of cells with the two sets of nanocarriers in consecutive steps permits the sequential transport of the anthracene and BODIPY chromophores across the plasma membrane and only then allows their co-encapsulation within the same supramolecular containers. Both mechanisms position the two sets of chromophores with complementary spectral overlap in close proximity to enable the efficient transfer of energy intracellularly from the anthracene donors to the BODIPY acceptors. In the presence of iodine substituents on the BODIPY platform, intersystem crossing follows energy transfer. The resulting triplet state can transfer energy further to molecular oxygen with the concomitant production of singlet oxygen to induce cell mortality. Furthermore, the donor can be excited with two near-infrared photons simultaneously to permit the photoinduced generation of singlet oxygen intracellularly under illumination conditions compatible with applications in vivo. Thus, these supramolecular strategies to control the excitation dynamics of multichromophoric assemblies in the intracellular environment can evolve into valuable protocols for photodynamic therapy.
Asunto(s)
Nanopartículas/química , Oxígeno Singlete/análisis , Espectrometría de Fluorescencia , Compuestos de Boro/química , Supervivencia Celular/efectos de los fármacos , Transferencia de Energía , Células HeLa , Humanos , Microscopía Fluorescente , Nanopartículas/toxicidad , Polímeros/química , Teoría CuánticaRESUMEN
Self-assembling nanoparticles of amphiphilic polymers can transport hydrophobic molecules across hydrophilic media and, as a result, can be valuable delivery vehicles for a diversity of biomedical applications. Strategies to monitor their dynamics noninvasively and in real time are, therefore, essential to investigate their translocation within soft matrices and, possibly, rationalize the mechanisms responsible for their diffusion in biological media. In this context, we designed molecular guests with photoactivatable fluorescence for these supramolecular hosts and demonstrated that the activation of the fluorescent cargo, under optical control, permits the tracking of the nanocarrier translocation across hydrogel matrices with the sequential acquisition of fluorescence images. In addition, the mild illumination conditions sufficient to implement these operating principles permit fluorescence activation within developing Drosophila melanogaster embryos and enable the monitoring of the loaded nanocarriers for long periods of time with no cytotoxic effects and no noticeable influence on embryogenesis. These photoresponsive compounds combine a borondipyrromethene (BODIPY) chromophore and a photocleavable oxazine within their covalent skeleton. Under illumination at an appropriate activation wavelength, the oxazine ring cleaves irreversibly to bring the adjacent BODIPY fragment in conjugation with an indole heterocycle. This structural transformation shifts bathochromically the BODIPY absorption and permits the selective excitation of the photochemical product with concomitant fluorescence. In fact, these operating principles allow the photoactivation of BODIPY fluorescence with large brightness and infinite contrast. Thus, our innovative structural design translates into activatable fluorophores with excellent photochemical and photophysical properties as well as provides access to a general mechanism for the real-time tracking of supramolecular nanocarriers in hydrophilic matrices.
Asunto(s)
Compuestos de Boro/química , Portadores de Fármacos/química , Colorantes Fluorescentes/química , Nanopartículas/química , Procesos Fotoquímicos , Animales , Drosophila melanogaster/embriología , Portadores de Fármacos/metabolismo , Diseño de Fármacos , Indoles/química , Imagen Óptica , Oxazinas/químicaRESUMEN
Photodimerization of cocrystals of four bispyridylethylenes and two stilbazoles with urea as a template in the solid state has been investigated following our success with thiourea. Four investigated olefins photodimerized quantitatively to a single dimer in the crystalline state only. The reactivity of urea-olefin crystals is understood on the basis of their packing arrangements in the crystalline state. In reactive crystals the adjacent reactive molecules are within 4.2 Å and parallel, whereas the unreactive ones have their adjacent molecules are farther than 4.6Å and nonparallel. Thus, with the knowledge of crystal packing the reactivity of urea-olefin crystals is predictable on the basis of Schmidt's topochemical postulates. The templating property of urea, similar to thiourea, derives from its ability to form hydrogen bonds with itself and the guest olefins. Despite the similarities in molecular structures of urea and thiourea their subtle electronic properties, yet to be fully understood, affect the crystal packing and consequently their reactivity in the crystalline state. Further work is needed to fully exploit the templating properties of urea.
Asunto(s)
Etilenos/química , Luz , Estilbamidinas/química , Tiourea/química , Urea/química , Cristalización , Cristalografía por Rayos X , Dimerización , Estructura MolecularRESUMEN
The complex Pt(SnBu(t)3)2(CNBu(t))2(H)2, 1, was obtained from the reaction of Pt(COD)2 and Bu(t)3SnH, followed by addition of CNBu(t). The two hydride ligands in 1 can be eliminated, both in solution and in the solid state, to yield Pt(SnBu(t)3)2(CNBu(t))2, 2. Addition of hydrogen to 2 at room temperature in solution and in the solid state regenerates 1. Complex 2 catalyzes H2-D2 exchange in solution to give HD. The proposed mechanism of exchange involves reductive elimination of Bu(t)3SnH from 1 to afford vacant sites on the Pt center, thus facilitating the exchange process. This is supported by isolation and characterization of Pt(SnMes3)(SnBu(t)3)(CNBu(t))2, 3, when the addition of H2 to 2 was carried out in the presence of free ligand Mes3SnH (Mes = 2,4,6-Me3C6H2). Complex Pt(SnMes3)2(CNBu(t))2, 5, can be prepared from the reaction of Pt(COD)2 with Mes3SnH and CNBu(t). The exchange reaction of 2 with Ph3SnH gave Pt(SnPh3)3(CNBu(t))2(H), 6, wherein both SnBu(t)3 ligands are replaced by SnPh3. Complex 6 decomposes in air to form square planar Pt(SnPh3)2(CNBu(t))2, 7. The complex Pt(SnPr(i)3)2(CNBu(t))2, 8, was also prepared. Out of the four analogous complexes Pt(SnR3)2(CNBu(t))2 (R = Bu(t), Mes, Ph, or Pr(i)), only the Bu(t) analogue does both H2 activation and H2-D2 exchange. This is due to steric effects imparted by the bulky Bu(t) groups that distort the geometry of the complex considerably from planarity. The reaction of Pt(COD)2 with Bu(t)3SnH and CO gas afforded trans-Pt(SnBu(t)3)2(CO)2, 9. Compound 9 can be converted to 2 by replacement of the CO ligands with CNBu(t) via the intermediate Pt(SnBu(t)3)2(CNBu(t))2(CO), 10.