In Vitro Culture Studies for the Mitigation of Heavy Metal Stress in Plants.

Heavy metals are among the most common and dangerous contaminants; their action on plants, as well as the possibility for plants to effectively absorb and translocate them, have been studied for several years, mainly for exploitation in phytoremediation, an environmentally friendly and potentially effective technology proposed and studied for the recovery of contaminated soils and waters. In this work, the analysis has focused on the studies developed using in vitro techniques on the possibilities of mitigating, in plants, the stress due to the presence of heavy metals and/or improving their absorption. These objectives can be pursued with the use of different substances and organisms, which have been examined in detail. The following are therefore presented in this review: an analysis of the role of metals and metalloids; the use of several plant growth regulators, with their mechanisms of action in different physiological phases of the plant; the activity of bacteria and fungi; and the role of other effective compounds, such as ascorbic acid and glutathione.

Transgenerational effects of chromium stress at the phenotypic and molecular level in Arabidopsis thaliana.

In this study, we describe the results obtained in a study of the transgenerational phenotypic effects of chromium (Cr) stress on the model plant species Arabidopsis thaliana. The F1 generation derived from parents grown under chronic and medium chronic stress showed significantly higher levels of the maximal effective concentration (EC50) compared with F1 plants generated from unstressed parents. Moreover, F1 plants from Cr-stressed parents showed a higher germination rate when grown in the presence of Cr. F1 plants derived from parents cultivated under chronic Cr stress displayed reduced hydrogen peroxide levels under Cr stress compared to controls. At lower Cr stress levels, F1 plants were observed to activate promptly more genes involved in Cr stress responses than F0 plants, implying a memory effect linked to transgenerational priming. At higher Cr levels, and at later stages, F1 plants modulated significantly fewer genes than F0 plants, implying a memory effect leading to Cr stress adaptation. Several bHLH transcription factors were induced by Cr stress in F1 but not in F0 plants, including bHLH100, ORG2 and ORG3. F1 plants optimized gene expression towards pathways linked to iron starvation response. A model of the transcriptional regulation of transgenerational memory to Cr stress is presented here, and could be applied for other heavy metal stresses.

In vitro and in vivo copper-treated Myrtus communis L.: terpene profiles and evidence for potential cultivation on metal-contaminated soils.

The intensive application of agro-chemicals, and in particular of copper (Cu)-based compounds, causes increasing pollution of agricultural land, with serious risks for human health. Aromatic plants used for purposes other than food, can be considered for the exploitation and/or remediation of metal-polluted substrates, since contamination of the essential oils by these metals was not significant. Myrtle (Myrtus communis L.) is a Mediterranean evergreen shrub whose essential oil has many commercial applications. In this work, the effect of an excess of Cu in respect to control conditions was assessed on M. communis growth and foliar terpene composition. Metal accumulation in roots and shoots was also evaluated for the possible use of this species in phytoremediation. The amount of Cu applied in our experiments minimally affected the terpene profiles of in vitro grown plants, whereas no variations were detected in in vivo plants. The presence of the metal in the soil did not significantly impair plant growth, thus allowing its cultivation on polluted substrates. On the other hand, the amount of Cu in the plant was not enough to result in a significant reduction of Cu levels in the soil. Therefore, myrtle plants proved to be good candidates for the re-vegetation of Cu-contaminated lands.

Extracting cadmium in the presence of salt: a study on three poplar clones under controlled conditions.

This study aimed at determining the cadmium phytoextraction potential of three Populus alba L. clones cultivated in the presence of increasing sodium chloride concentrations. Plantlets of a commercial and two autochthonous poplar clones were grown in perlite with nutrient solution enriched in CdSO4 (50 and 100 µM) and NaCl (25 and 50 mM), administered either alone or in combination. The three clones showed significant variation not only in cadmium and salt tolerance, accumulation and content, but also in the effect of the interaction between the two elements on these parameters. The toxic effect of Cd and salt excess on plants was mutually exacerbated by the presence of both. Even though the outcome of the joint treatment was always a decrease in shoot Cd or Na accumulation, the three clones showed variation in the extent of such reduction. Evaluating the total element content per plant shoot, the fast-growing commercial clone displayed the highest phytoextraction potential for Cd and Na, either alone or in mixture. Our results demonstrated for the first time that the Cd response in presence of salt can vary in the different clones.

Paradoxical effects of density on measurement of copper tolerance in Silene paradoxa L.

This work investigated if the assessment of tolerance to trace metals can depend on plant density in the experimental design. A non-metallicolous and a metallicolous populations of Silene paradoxa were hydroponically cultivated at increasing density and in both the absence (-Cu conditions) and excess of copper (+Cu conditions). In -Cu conditions, the metallicolous population showed a lower susceptibility to plant density in comparison to the non-metallicolous one, explained by a higher capacity of the metallicolous population to exploit resources. In +Cu conditions, an alleviating effect of increasing density was found in roots. Such effect was present to a greater extent in the non-metallicolous population, thus making the populations equally copper-tolerant at the highest density used. In shoots, an additive effect of increasing plant density to copper toxicity was reported. Its higher intensity in the metallicolous population reverted the copper tolerance relationship at the highest plant densities used. In both populations, a density-induced decrease in root copper accumulation was observed, thus concurring to the reported mitigation in +Cu conditions. Our work revealed the importance of density studies on the optimization of eco-toxicological bioassays and of metal tolerance assessment and it can be considered the first example of an alleviating effect of increasing plant number on copper stress in a metallophyte.

Somatic Embryogenesis in Horse Chestnut (Aesculus hippocastanum L.).

Embryogenic cultures of horse chestnut (Aesculus hippocastanum L.) can be obtained from different organs and tissues. We describe here the induction from stamen filaments and the procedures applied for the successive phases of somatic embryo development and maturation. Embryogenic tissues are obtained on Murashige and Skoog medium containing 9.0 µM 2,4-dichlorophenoxyacetic acid. Somatic embryos develop after transfer to hormone-free medium enriched with glutamine. Maturation and germination of isolated embryos are achieved by transfer to medium containing polyethylene glycol 4000 and activated charcoal, successive desiccation treatment, and cold storage at 4 °C for 8 weeks.

In vitro propagation of ash (Fraxinus excelsior L.) by somatic embryogenesis.

Induction of somatic embryogenesis is described in common ash (Fraxinus excelsior L.). Embryogenic tissues are obtained from immature zygotic embryos and cultured on a modified Murashige and Skoog (MS) medium containing 8.8 µM 2,4-dichlorophenoxyacetic acid and 4.4 µM benzyl-adenine. Embryogenic tissue is subcultured and multiplied on medium supplemented with reduced concentration of plant growth hormones. Somatic embryos develop and mature by transfer to hormone-free medium and subsequent culture on medium containing low amount of benzyladenine. Somatic embryo germination and conversion are enhanced by cold storage at 4°C and successive transfer onto Woody Plant Medium (WPM). Fully developed plantlets are then transferred to pots and acclimatized in the greenhouse equipped with a mist system.

Exploring the metal phytoremediation potential of three Populus alba L. clones using an in vitro screening.

PURPOSE: This work was planned for providing a useful screening tool for the selection of Populus alba clones suitable for phytoremediation techniques. To this aim, we investigated variation in arsenic, cadmium, copper, and zinc tolerance, accumulation and translocation in three poplar clones through an in vitro screening. Poplars have been widely proposed for phytoremediation, as they are adaptable to grow on contaminated areas and able to accumulate metals. The investigation of possible differences among poplar clones in metal tolerance and accumulation deserves to be deeply studied and exploited for the selection of the more suitable tool for phytoremediation purposes. METHODS: In vitro multiplied microshoots of a commercial and two autochthonous P. alba clones were subcultured on hormone-free WPM medium for 1 month and then transferred for 2 weeks onto media containing different concentrations of the metals investigated. At the end of the treatments, plantlets were sampled, weighed, and mineralised by wet ashing. Metal concentrations were determined by ICP-OES. RESULTS: For the metal concentration used in the experiments, our clones of P. alba showed variation in metal tolerance, metal accumulation and content. The fast-growing commercial clone, even if rarely showing the highest plant metal concentration, displayed the highest metal content, suggesting biomass production as the key factor in evaluating the phytoextraction capacity of P. alba clones for the metals studied. CONCLUSIONS: Data demonstrated that in vitro screening of cuttings represents a valuable way of assessing the ability of different poplar clones to take up, tolerate and survive metal stress.

Cryopreservation of embryogenic callus of Aesculus hippocastanum L. by vitrification or one-step freezing.

An effective procedure for the cryopreservation of horse chestnut (Aesculus hippocastanum L.) embryogenic callus by vitrification/one-step freezing is described here. In particular, the study focused on the possibility of recovering the full proliferation potential of the embryogenic lines after storage in liquid nitrogen. The developmental stage of the embryogenic lines was shown to play an important role. Ninety-min incubation in PVS2 and preservation at -196 degrees C of callus samples, containing a prevalence of embryogenic masses at an advanced stage of somatic embryo maturation (i.e., the torpedo stage), gave optimum regrowth of healthy and proliferating embryogenic callus. Moreover, raising the thawing temperature to 45 degrees C yielded the maximum survival (94%) of torpedo-stage embryogenic samples, recovery of proliferation and, in more than 70% of cases, maturation to the cotyledonary stage. This study opens the way to the possibility of safe, long-term storage in liquid nitrogen of valuable embryogenic lines of horse chestnut, avoiding repeated subculturing.