RESUMEN
In this study, we propose an approach to the synthesis of new biodegradable polymer materials based on renewable raw feedstock (betulin) and derivatives of hydroxycarboxylic acids using a catalyst/catalytic system (γ-Al2O3, γ-Al2O3/TBHP) that is safe for health and the environment. The resulting polymers are linear thermoplastic polymers that undergo collapse upon melting in the presence of atmospheric oxygen. Moreover, these polymers demonstrate non-toxicity towards a range of Gram-positive and Gram-negative bacteria. The polycondensation of betulin with butyl lactate is particularly noteworthy.
RESUMEN
Enzyme immobilization can offer a range of significant advantages, including reusability, and increased selectivity, stability, and activity. In this work, a central composite design (CCD) of experiments and response surface methodology (RSM) were used to study, for the first time, the L-asparaginase (ASNase) immobilization onto functionalized carbon xerogels (CXs). The best results were achieved using CXs obtained by hydrothermal oxidation with nitric acid and subsequent heat treatment in a nitrogen flow at 600 °C (CX-OX-600). Under the optimal conditions (81â min of contact time, pHâ 6.2 and 0.36â g/L of ASNase), an immobilization yield (IY) of 100 % and relative recovered activity (RRA) of 103 % were achieved. The kinetic parameters obtained also indicate a 1.25-fold increase in the affinity of ASNase towards the substrate after immobilization. Moreover, the immobilized enzyme retained 97 % of its initial activity after 6 consecutive reaction cycles. All these outcomes confirm the promising properties of functionalized CXs as support for ASNase, bringing new insights into the development of an efficient and stable immobilization platform for use in the pharmaceutical industry, food industry, and biosensors.
RESUMEN
The worldwide increase in antibiotic resistance poses a significant challenge, and researchers are diligently seeking new drugs to combat infections and prevent bacterial pathogens from developing resistance. Gold (I and III) complexes are suitable for this purpose. In this study, we tested four gold (I and III) complexes, (1) chlorotrimethylphosphine gold(I); (2) chlorotriphenylphosphine gold(I); (3) dichloro(2-pyridinecarboxylate) gold (III); and (4) 1,3-bis(2,6-diisopropylphenyl)imidazole-2-ylidene gold(I) chloride, for their antibacterial, antibiofilm, antiviral, and anti-quorum sensing activities. Results reveal that 1 significantly inhibits Escherichia coli DSM 1077 and Staphylococcus aureus ATCC 6538, while 2, 3, and 4 only inhibit S. aureus ATCC 6538. The minimum inhibitory concentration (MIC) of 1 for S. aureus ATCC 6538 is 0.59 µg/mL (1.91 µM), and for methicillin-resistant S. aureus strains MRSA 12 and MRSA 15, it is 1.16 µg/mL (3.75 µM). For E. coli DSM 1077 (Gram-negative), the MIC is 4.63 µg/mL (15 µM), and for multi-resistant E. coli I731940778-1, it is 9.25 µg/mL (30 µM). Complex 1 also disrupts biofilm formation in E. coli and S. aureus after 6 h or 24 h exposure. Moreover, 1 and 2 inhibit the replication of two enterobacteria phages. Anti-quorum sensing potential still requires further clarification. These findings highlight the potential of gold complexes as effective agents to combat bacterial and viral infections.
RESUMEN
Cadmium sulfide (CdS) is a photocatalyst widely used for efficient H2 production under visible light irradiation, due to its narrow bandgap and suitable conduction band position. However, the fast recombination of carriers results in their low utilization. In order to improve photocatalytic hydrogen production, it reports the successful introduction of metallic Cd and S vacancies on CdS nanorods (CdS NRs) by a facile in situ chemical reduction method, using a thermal treatment process. This procedure generates interfacial and polarization electric fields, that significantly improve the photocatalytic hydrogen production performance of CdS NRs in sodium sulfide and sodium sulfite aqueous solutions, under visible light irradiation (λ >420 nm). The introduction of these electric fields is believed to improve charge separation and facilitate faster interfacial charge migration, resulting in a significantly optimized catalyst, with a photocatalytic hydrogen evolution rate of up to 10.6 mmol-1 g-1 h-1 with apparent quantum efficiency (AQE) of 12.1% (420 nm), which is 8.5 times higher than that of CdS. This work provides a useful method to introduce metallic and S vacancies on metal sulfide photocatalysts to build local polarization and interfacial electric fields for high-performance photocatalytic H2 production.
RESUMEN
In this study, bimetallic nanoparticles (NPs) of silver (Ag) and zinc oxide (ZnO) were synthesized using Leptadenia pyrotechnica leaf extract for the first time. Monometallic NPs were also obtained for comparison. The characterization of the prepared NPs was carried out using various techniques, including UV-Visible spectroscopy (UV-Vis), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The latter confirmed the crystalline nature and diameter of the monometallic and bimetallic NPs of Ag and ZnO. The SEM images of the prepared NPs revealed their different shapes. The biological activities of the NPs were evaluated concerning their antibacterial, antioxidant, and cytotoxic properties. The antibacterial activities were measured using the time-killing method. The results demonstrated that both the monometallic and bimetallic NPs inhibited the growth of Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria. The antioxidant activities of the NPs were evaluated using the DPPH (2,2-diphenyl-1-picrylhydrazyl) assay and their cytotoxicity was checked using the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. The results indicated that the controlled quantity of the monometallic and bimetallic NPs did not affect the viability of the cells. However, the decreased cell (L-929) viability suggested that the NPs could have anticancer properties. Furthermore, the photocatalytic degradation of methyl violet and 4-nitrophenol was investigated using the prepared Ag/ZnO NPs, examining the factors affecting the degradation process and conducting a kinetic and thermodynamic study. The prepared Ag/ZnO NPs demonstrated good photocatalytic degradation (88.9%) of the methyl violet (rate constant of 0.0183 min-1) in comparison to 4-nitrophenol (NPh), with a degradation rate of 81.37% and 0.0172 min-1, respectively. Overall, the bimetallic NPs showed superior antibacterial, antioxidant, cytotoxic, and photocatalytic properties compared to the monometallic NPs of Ag and ZnO.
RESUMEN
This comprehensive review explores the potential and versatility of biogenic materials as sustainable and environmentally benign alternatives to conventional adsorbents for the removal of drugs and dyes. Biogenic adsorbents derived from plants, animals, microorganisms, algae and biopolymers have bioactive compounds that interact with functional groups of pollutants, resulting in their binding with the sorbent. These materials can be modified mechanically, thermally and chemically to enhance their adsorption properties. Biogenic hybrid composites, which integrate the characteristics of more than one material, have also been fabricated. Additionally, microorganisms and algae are analyzed for their ability to uptake pollutants. Various influential factors that contribute to the adsorption process are also discussed. The challenge, limitations and future prospects for research are reviewed and bridging gap between large scale application and laboratory scale. This comprehensive review, involves a combination of various biogenic adsorbents, going beyond the existing literature where typically only specific adsorbents are reported. The review also covers the isotherms, kinetics, and desorption studies of biogenic adsorbents, providing an improved framework for their effective use in removing pharmaceuticals and dyes from wastewater.
Asunto(s)
Contaminantes Ambientales , Contaminantes Químicos del Agua , Purificación del Agua , Colorantes , Contaminantes Químicos del Agua/química , Purificación del Agua/métodos , Aguas Residuales , AdsorciónRESUMEN
Photo-oxidation with semiconductor photocatalysts provides a sustainable and green solution for NOx elimination. Nevertheless, the utilization of traditional photocatalysts in efficient and safe photocatalytic NOx removal is still a challenge due to the slow charge kinetic process and insufficient optical absorption. In this paper, we report a novel porous g-C3N4 nanosheet photocatalyst modified with cyano defects and CaCO3 (xCa-CN). The best performing sample (0.5Ca-CN) exhibits an enhanced photo-oxidation NO removal rate (51.18 %) under visible light irradiation, largely surpassing the value of pristine g-C3N4 nanosheets (34.05 %). Such an enhancement is mainly derived from an extended visible-light response, improved electron excitation and transfer, which are associated with the synergy of cyano defects and CaCO3, as evidenced by a series of spectroscopic analyses. More importantly, in-situ DRIFTS and density functional theory (DFT) results suggest that the introduction of cyano defects and CaCO3 enables control over NO adsorption and activation processes, making it possible to implement a preference pathway (NO â NO+ â NO3¯) and reduce the emission of toxic intermediate NO2. This work demonstrates the potential of integrating defect engineering and insulator modification to design highly efficient g-C3N4-based photocatalysts for air purification.
RESUMEN
Among carbon-based nanomaterials, carbon dots (CDs) have received a surge of interest in recent years due to their attractive features such as tunable photoluminescence, cost effectiveness, nontoxic renewable resources, quick and direct reactions, chemical and superior water solubility, good cell-membrane permeability, and simple operation. CDs and their composites have a large potential for sensing contaminants present in physical systems such as water resources as well as biological systems. Tuning the properties of CDs is a very important subject. This review discusses in detail heteroatom doping (N-doped CDs, N-CDs) and the formation of metal-based CD nanocomposites using a combination of matrices, such as metals and metal oxides. The properties of N-CDs and metal-based CDs nanocomposites, their syntheses, and applications in both chemical sensing and biosensing are reviewed.
RESUMEN
CABs (Ca alginate beads), AVCABs (Aloe vera Ca alginate beads), and AVMNCABs (Aloe-vera functionalized magnetic nanoparticles entrapped Ca alginate beads) were developed as adsorbents for the removal of Cu(II) from aqueous solutions. The materials were characterized using Fourier-transform infrared (FTIR) spectroscopy, high-resolution scanning electron microscopic (HR-SEM) analysis, X-ray diffraction (XRD), energy-dispersive X-ray (EDX) spectroscopy, and a vibrating-sample magnetometer (VSM). The effect of several parameters, such as pH, time, temperature, adsorbent dose, etc., were investigated. The adsorption isotherm of Cu(II) was adjusted best to the Langmuir model. The maximum adsorption capacities were 111.11 mg/g, 41.66 mg/g, and 15.38 mg/g for AVMNCABs, AVCABs, and CABs, respectively. The study of the adsorption kinetics for Cu(II) ions on beads followed a pseudo-second-order kinetic model, with a very good correlation in all cases. The adsorption studies used a spectrophotometric method, dealing with the reaction of Cu(II) with KSCN and variamine blue.
RESUMEN
L-asparaginase (ASNase) is an aminohydrolase currently used in the pharmaceutical and food industries. Enzyme immobilization is an exciting option for both applications, allowing for a more straightforward recovery and increased stability. High surface area and customizable porosity make carbon xerogels (CXs) promising materials for ASNase immobilization. This work describes the influence of contact time, pH, and ASNase concentration on the immobilization yield (IY) and relative recovered activity (RRA) using the Central Composite Design methodology. The most promising results were obtained using CX with an average pore size of 4 nm (CX-4), reaching IY and RRA of 100%. At the optimal conditions (contact time 49 min, pH 6.73, and [ASNase] 0.26 mg·mL-1), the ASNase-CXs biocomposite was characterized and evaluated in terms of kinetic properties and operational, thermal, and pH stabilities. The immobilized ASNase onto CX-4 retained 71% of its original activity after six continuous reaction cycles, showed good thermal stability at 37 °C (RRA of 91% after 90 min), and was able to adapt to both acidic and alkaline environments. Finally, the results indicated a 3.9-fold increase in the immobilized ASNase affinity for the substrate, confirming the potential of CXs as a support for ASNase and as a cost-effective tool for subsequent use in the therapeutic and food sectors.
RESUMEN
Herein, we investigated the effect of the support modification (Sibunit carbon) with diazonium salts of Pd and Pd-Au catalysts on furfural hydrogenation under 5 bars of H2 and 50 °C. To this end, the surface of Sibunit (Cp) was modified with butyl (Cp-Butyl), carboxyl (Cp-COOH) and amino groups (Cp-NH2) using corresponding diazonium salts. The catalysts were synthesized by the sol immobilization method. The catalysts as well as the corresponding supports were characterized by Fourier transform infrared spectroscopy, N2 adsorption-desorption, inductively coupled plasma atomic emission spectroscopy, high resolution transmission electron microscopy, energy dispersive spectroscopy, X-ray diffraction, Hammet indicator method and X-ray photoelectron spectroscopy. The analysis of the results allowed us to determine the crucial influence of surface chemistry on the catalytic behavior of the studied catalysts, especially regarding selectivity. At the same time, the structural, textural, electronic and acid-base properties of the catalysts were practically unaffected. Thus, it can be assumed that the modification of Sibunit with various functional groups leads to changes in the hydrophobic/hydrophilic and/or electrostatic properties of the surface, which influenced the selectivity of the process.
RESUMEN
Metal sulfides are a type of reduction semiconductor photocatalysts with narrow bandgap and negative conduction band potential, which make them have unique photocatalytic performance in solar-to-fuel conversion and environmental purification. However, metal sulfides also suffer from low quantum efficiency and photocorrosion. In this review, the strategies to improve the photocatalytic activity of metal sulfide photocatalysts by stimulating the charge separation and improving light-harvesting ability are introduced, including morphology control, semiconductor coupling and surface modification. In addition, the recent research progress aiming at improving their photostability is also illustrated, such as, construction of hole transfer heterojunctions and deposition of hole transfer cocatalysts. Based on the electronic band structures, the applications of metal sulfides in photocatalysis, namely, hydrogen production, degradation of organic pollutants and reduction of CO2, are summarized. Finally, the perspectives of the promising future of metal-sulfide based photocatalysts and the challenges remaining to overcome are also presented.
Asunto(s)
Procesos Fotoquímicos , Semiconductores , Catálisis , Sulfuros , Luz SolarRESUMEN
This work focuses on the combination of multifunctional photocatalytic and adsorbent materials in a unique polymeric membrane. For this purpose, Au/TiO2 and Y2(CO3)3 nanoparticles were immobilised onto a poly (vinylidene fluoride-hexafluoropropylene), (PVDF-HFP) membrane, and the physical-chemical characterisation of these materials was performed, as well as pollutant removal efficiency. An efficient TiO2 functionalisation with gold nanoparticles was achieved, endowing these particles with the capability to absorb visible radiation absorption. A favourable porous structure was obtained for the membranes, with an average pore size of 4 µm, and the nanoparticles immobilisation did not alter the chemical properties of the polymeric membrane. The produced hybrid materials, including both the Au/TiO2 and Y2(CO3)3 nanoparticles, presented an efficiency of 57% in the degradation of norfloxacin (5 mg/L) under ultraviolet radiation for 120 min, 80% under visible radiation for 300 min, and 58% in arsenic adsorption for 240 min. These membranes represent a new multifunctional platform for removing several pollutants, which may allow their incorporation in more efficient and less energy-consuming water treatment processes favouring its application, even in low energy resources countries.
Asunto(s)
Oro , Nanopartículas del Metal , Adsorción , Titanio/química , Rayos UltravioletaRESUMEN
The N-alkylation of 1,3,5-triaza-7-phosphaadamantane (PTA) with ortho-, meta- and para-substituted nitrobenzyl bromide under mild conditions afforded three hydrophilic PTA ammonium salts, which were used to obtain a new set of seven water-soluble copper(I) complexes. The new compounds were fully characterized and their catalytic activity was investigated for the low power microwave assisted one-pot azide-alkyne cycloaddition reaction in homogeneous aqueous medium to obtain disubstituted 1,2,3-triazoles. The most active catalysts were immobilized on activated carbon (AC), multi-walled carbon nanotubes (CNT), as well as surface functionalized AC and CNT, with the most efficient support being the CNT treated with nitric acid and NaOH. In the presence of the immobilized catalyst, several 1,4-disubstituted-1,2,3-triazoles were obtained from the reaction of terminal alkynes, organic halides and sodium azide in moderate yields up to 80%. Furthermore, the catalyzed reaction of terminal alkynes, formaldehyde and sodium azide afforded 2-hydroxymethyl-2H-1,2,3-triazoles in high yields up to 99%. The immobilized catalyst can be recovered and recycled through simple workup steps and reused up to five consecutive cycles without a marked loss in activity. The described catalytic systems proceed with a broad substrate scope, under microwave irradiation in aqueous medium and according to "click rules".
RESUMEN
A novel beads adsorbent, consisting of calcium alginate entrapped on magnetic nanoparticles functionalized with methionine (MFMNABs), was developed for effective elimination of arsenic from water. The material was characterized by FT-IR (Fourier Transform Infrared Spectroscopy), SEM (Scanning Electron Microscopic), XRD (X-ray Diffraction) and TEM (Transmission Electron Microscopy). The arsenic removal capacity of the material was studied by altering variables such as pH of the solution, contact time, adsorbent dose and adsorbate concentration. The maximal removal of As(III) was 99.56% under optimal conditions with an equilibrium time of 110 min and pH 7.0-7.5. The adsorption followed a second order kinetics and data best fitted the Langmuir isotherm with a correlation coefficient of R2 = 0.9890 and adsorption capacity (qm) of 6.6533 mg/g. The thermodynamic study showed entropy change (∆S) and enthalpy change (∆H) to be 34.32 J mol-1 K and 5.25 kJ mol-1, respectively. This study proved that it was feasible to treat an As(III) solution with MFMNABs. The synthesized adsorbent was cost-effective, environmentally friendly and versatile, compared to other adsorbents. The adsorption study was carried by low cost spectrophotometric method using N- bromosuccinimide and rhodamine-B developed in our laboratory.
RESUMEN
Oxidovanadium(V) and dioxidovanadium(V) compounds, [VO(OEt)L] (1) and [Et3NH][VO2L] (2), were synthesized using an aroylhydrazone Schiff base (5-bromo-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H2L). They were characterized by elemental analysis, Fourier-transform infrared spectroscopy (FT-IR), (1H and 51V) nuclear magnetic resonance (NMR), electrospray ionization mass spectrometry (ESI-MS) and single crystal X-ray diffraction analyses. Both complexes were immobilized on functionalized carbon nanotubes and activated carbon. The catalytic performances of 1 and 2, homogenous and anchored on the supports, were evaluated for the first time towards the MW-assisted peroxidative oxidation (with tert-butylhydroperoxide, TBHP) of cyclohexane under heterogeneous conditions. The immobilization of 1 and 2 on functionalized carbon materials improved the efficiency of catalytic oxidation and allowed the catalyst recyclability with a well-preserved catalytic activity.
RESUMEN
Herein, it has been shown that betulin can be transformed into its biologically active oxo-derivatives (betulone, betulinic and betulonic aldehydes) by liquid-phase oxidation over supported silver catalysts under mild conditions. In order to identify the main factors determining the catalytic behavior of nanosilver catalysts in betulin oxidation, silver was deposited on various alumina supports (γ-alumina and boehmite) using deposition-precipitation with NaOH and incipient wetness impregnation methods, followed by treatment in H2 or O2. Silver catalysts and the corresponding supports were characterized by X-ray diffraction, nitrogen physisorption, inductively coupled plasma optical emission spectroscopy, photoelectron spectroscopy and transmission electron microscopy. It was found that the support nature, preparation and treatment methods predetermine not only the average Ag nanoparticles size and their distribution, but also the selectivity of betulin oxidation, and thereby, the catalytic behavior of Ag catalysts. In fact, the support nature had the most considerable effect. Betulin conversion, depending on the support, increased in the following order: Ag/boehmite < Ag/boehmite (calcined) < Ag/γ-alumina. However, in the same order, the share of side reactions catalyzed by strong Lewis acid centers of the support also increased. Poisoning of the latter by NaOH during catalysts preparation can reduce side reactions. Additionally, it was revealed that the betulin oxidation catalyzed by nanosilver catalysts is a structure-sensitive reaction.
RESUMEN
In spite of the growing demand for new antibiotics, in the recent years, the occurrence of fluoroquinolone antibiotics (as a curative agent for urinary tract disorders and respiratory problems) in wastewater have drawn immense attention. Traces of antibiotic left-overs are present in the water system, causing noxious impact on human health and ecological environments, being a global concern. Our present work aims at tackling the major challenge of toxicity caused by antibiotics. This study deals with the efficient adsorption of two commonly used fluoroquinolone (FQ) antibiotics, i.e., Ofloxacin (OFX) and Moxifloxacin (MOX) on spherical hydrogel beads generated from methionineâfunctionalized graphene oxide/ sodium alginate polymer (abbreviated Met-GO/SA) from aqueous solutions. The composition, morphology and crystal phase of prepared adsorbents were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FTIR), high-resolution transmission electron microscopy (HR-TEM) and thermogravimetric analysis/differential thermogravimetry (TGA/DTG). Batch adsorption tests are followed to optimize the conditions required for adsorption process. Both functionalized and non-functionalized adsorbents were compared to understand the influence of several experimental parameters, such as, the solution pH, contact time, adsorbent dosage, temperature and initial concentration of OFX and MOX on adsorption. The obtained results indicated that the functionalized adsorbent (Met-GO/SA) showed a better adsorption efficiency when compared to non-functionalized (GO/SA) adsorbent. Further, the Langmuir isotherm was validated as the best fitting model to describe adsorption equilibrium and pseudo second-order-kinetic model fitted well for both types of adsorbate. The maximum adsorption capacities of Met-GO/SA were 4.11 mg/g for MOX and 3.43 mg/g for OFX. Thermodynamic parameters, i.e., ∆G°, ∆H° and ∆S° were also calculated. It was shown that the overall adsorption process was thermodynamically favorable, spontaneous and exothermic in nature. The adsorbents were successfully regenerated up to four cycles with 0.005 M NaCl solutions. Overall, our work showed that the novel Met-GO/SA nanocomposite could better contribute to the removal of MOX and OFX from the liquid media. The gel beads prepared have adequate features, such as simple handling, eco-friendliness and easy recovery. Hence, polymer gel beads are promising candidates as adsorbents for large-scale water remediation.
RESUMEN
Carbon formation on steel has recently become an active research area with several important applications, using either carbon nanotubes (CNTs) or graphene structures. The production of vertically aligned CNT (VACNT) forests with combined metals has been explored with important results. Detailed kinetics is the best approach to understand a mechanism. The growth behavior seems complex but can be simplified through the knowledge of the three more common alternative reaction mechanisms/routes. The time required to optimize the production and properties might be reduced. The mechanistic proposal reported in 1971 was better explained recently. The volcano shape Arrhenius plot reported is observed only when Fe, Co, and Ni are used as reaction catalysts. Other metals are catalytically active at higher temperatures, following a different route, which does not require surface catalysis decomposition of the reactive gas. C2H2 and low olefins react well, but CH4 is not reactive via this surface catalysis route. Optimizing production of CNTs, research work is usually based on previous experience, but solid-state science-based studies are available.
RESUMEN
In this work, we successfully synthesized novel polymer gel beads based on functionalized iron oxide (Fe3O4), activated charcoal (AC) particles with ß-cyclodextrin (CD) and sodium alginate (SA) polymer (Fe3O4/CD/AC/SA), by a simple, reproducible and inexpensive method. These beads proved to be versatile and strong adsorbents with magnetic properties and high adsorption capacity. The composites were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, vibrating sample magnetometry, adsorption at -196 °C, high resolution transmission electron microscopy, thermogravimetric analysis and point of zero charge measurements. Two dyes, two drugs and one metal were used to test the adsorption capability of the prepared polymer nanocomposite. The adsorbent showed good removal efficiencies for the studied pollutants, especially the cationic dyes and the metal, when compared to other low-cost adsorbents. The saturated adsorption capacity of Fe3O4/CD/AC/SA reached 5.882 mg g-1 for methyl violet (MV), 2.283 mg g-1 for brilliant green (BG), 2.551 mg g-1 for norfloxacin (NOX), 3.125 mg g-1 for ciprofloxacin (CPX), 10.10 mg g-1 for copper metal ion (Cu(II)). The adsorption isotherm studies showed that data fitted well with Langmuir and Temkin isotherms models. The kinetic data showed good correlation coefficient with low error function for the pseudo-second order kinetic model. The data analysis was carried out using error and regression coefficient functions for the estimation of best-fitting isotherm and kinetic models, namely: chi-square test (χ2) and sum of the squares of errors (SSE). The activation energy was found to be 47.68 kJ mol-1 for BG, 29.09 kJ mol-1 for MV, 28.93 kJ mol-1 for NOX, 4.53 kJ mol-1 for CPX and 17.08 kJ mol-1 for Cu(II), which represent chemisorption and physisorption behavior of sorbent molecules. The polymer composites can be regenerated and easily separated from aqueous solution without any weight loss. After regeneration, the Fe3O4/CD/AC/SA beads still have good adsorption capacities up to four cycles of desorption and adsorption. The results indicate that the polymer gel beads are promising adsorbents for the removal of different categories of toxicants (like dyes, drugs and metal) in single adsorbate aqueous systems. Thus, the novel Fe3O4/CD/AC/SA beads can be effectively employed for a large-scale applications as environmentally compatible materials for the adsorption of different categories of pollutants.