Use of marine occurrent extracts to enhance the stability of dentin extracellular matrix.

Chitosan (CS) and phloroglucinol (PhG), two extracts abundantly found in marine life, were investigated for their ability to biomodify demineralized dentin by enhancing collagen crosslinks and improving dentin extracellular matrix (ECM) mechanical and biochemical stability. Dentin obtained from non-carious extracted human molars were demineralized with phosphoric acid. Baseline Fourier-transform infrared (FTIR) spectra, apparent flexural elastic modulus (AE) and dry mass (DM) of each specimen were independently acquired. Specimens were randomly incubated for 5 min into either ultrapure water (no-treatment), 1% glutaraldehyde (GA), 1% CS or 1% PhG. Water and GA were used, respectively, as a negative and positive control for collagen crosslinks. Specimens' post-treatment FTIR spectra, AE, and DM were obtained and compared with correspondent baseline measurements. Additionally, the host-derived proteolytic activity of dentin ECM was assessed using hydroxyproline assay (HYP) and spectrofluorometric analysis of a fluorescent-quenched substrate specific for matrix metalloproteinases (MMPs). Finally, the bond strength of an etch-and-rinse adhesive was evaluated after application of marine compounds as non-rinsing dentin primers. Dentin specimens FTIR spectral profile changed remarkably, and their AE increased significantly after treatment with marine compounds. DM variation, HYP assay and fluorogenic substrate analysis concurrently indicated the biodegradation of CS- and PhG-treated specimens was significantly lesser in comparison with untreated specimens. CS and PhG treatments enhanced biomechanical/biochemical stability of demineralized dentin. These novel results show that PhG is a primer with the capacity to biomodify demineralized dentin, hence rendering it less susceptible to biodegradation by host-proteases.

Dentin Degradation: From Tissue Breakdown to Possibilities for Therapeutic Intervention.

Purpose of the Review: Presently, dental materials science is driven by the search for new and improved materials that can trigger specific reactions from the affected tissue to stimulate repair or regeneration while interacting with the oral environment to promote or maintain oral health. In parallel, evidence from the past decades has challenged the exclusive role of bacteria in dentin tissue degradation in caries, questioning our understanding of caries etiopathogenesis. The goal of this review is to recapitulate the current evidence on the host and bacterial contributions to degradation, inflammation, and repair of the dentin-pulp complex in caries. Recent Findings: Contrasting findings attribute dentin breakdown to the activity of endogenous enzymes, such as matrix metalloproteinases (MMPs) and cathepsins, while the role of bacteria and their by-products in the destruction of dentin organic matrix and pulp inflammation has been for decades supported as an incontestable paradigm. Aiming to better understand the mechanisms involved in collagen degradation by host enzymes in caries, studies have showed that these proteinases are expressed in the mature dentin (i.e., after dentin formation) and become activated by the low pH in the acidic environment resulted by bacterial metabolism in caries. However, different host sources other than dentin-bound proteinases seem to also contribute to caries progression, such as saliva and pulp. Interestingly, studies evaluating pulp responses to bacteria invasion and inflammation in caries report higher levels of MMPs and cathepsins in inflamed tissue, but also showed MMP potential to resolve inflammation and stimulate wound healing. Notably, as reported for other tissues, MMPs exert dual roles in the dentin-pulp complex in caries, participating or regulating both degradative and reparative mechanisms. Summary: The specific roles of host and bacteria and their by-products in caries progression have yet to be clarified. The complex interactions between inflammation and repair in caries pose challenges to a clear understanding of the dentin-pulp complex responses and changes to bacteria invasion. However, it opens new venues for the development of novel therapies and dental biomaterials based on the modulation of specific mechanisms to favor tissue repair and healing.

In vitro assessment of antimicrobial potential of low molecular weight chitosan and its ability to mechanically reinforce and control endogenous proteolytic activity of dentine.

AIMS: Chitosan-based biomaterials exhibit several properties of biological interest for endodontic treatment. Herein, a low molecular weight chitosan (CH) solution was tested for its antimicrobial activity against Enterococcus faecalis (E. faecalis) and effects on dentine structure. METHODOLOGY: The root canal of 27 extracted uniradicular teeth were biomechanically prepared, inoculated with a suspension of E. faecalis and randomly assigned to be irrigated with either 5.25% sodium hypochlorite (NaClO), 0.2% CH or sterile ultrapure water (W). Bacteriologic samples were collected from root canals and quantified for of E. faecalis colony-forming units (CFUs). The effectiveness of CH over E. faecalis biofilms was further measured using the MBEC Assay®. Additionally, dentine beams and dentine powder were obtained, respectively, from crowns and roots of 20 extracted third molars. Dentine samples were treated or not with 17% EDTA and immersed in either CH or W for 1 min. The effects of CH on dentine structure were evaluated by assessment of the modulus of elasticity, endogenous proteolytic activity and biochemical modifications. RESULTS: The number of E. faecalis CFUs was significantly lower for samples irrigated with CH and NaClO. No significant differences were found between CH and NaClO treatments. Higher modulus of elasticity and lower proteolytic activity were reported for dentine CH-treated specimens. Chemical interaction between CH and dentine was observed for samples treated or not with EDTA. CONCLUSIONS: Present findings suggest that CH could be used as an irrigant during root canal treatment with the triple benefit of reducing bacterial activity, mechanically reinforcing dentine and inhibiting dentine proteolytic activity.

Red Marine Algae Lithothamnion calcareum Supports Dental Enamel Mineralization.

The current management of oral conditions such as dental caries and erosion mostly relies on fluoride-based formulations. Herein, we proposed the use of the remaining skeleton of Lithothamnion calcareum (LC) as an alternative to fluorides. LC is a red macroalgae of the Corallinales order, occurring in the northeast coast of Brazil, whose unique feature is the abundant presence of calcium carbonates in its cell walls. Two experimental approaches tested the general hypothesis that LC could mediate enamel de-remineralization dynamics as efficiently as fluorides. Firstly, the effect of LC on enamel de-mineralization was determined in vitro by microhardness and gravimetric measurements to test the hypothesis that LC could either prevent calcium/phosphate release from intact enamel or facilitate calcium/phosphate reprecipitation on an artificially demineralized enamel surface. Subsequently, an in situ/ex vivo co-twin control study measured the effect of LC on the remineralization of chemical-demineralized enamel using microhardness and quantitative light-induced fluorescence. With this second experiment, we wanted to test whether outcomes obtained in experiment 1 would be confirmed by an in situ/ex vivo co-twin control model. Both experiments showed that LC exhibited equivalent or superior ability to modulate enamel de-remineralization when compared to fluoride solution. LC should be explored as an alternative to manage oral conditions involving the enamel demineralization.

Differential analysis of the dentin soluble proteomic.

OBJECTIVES: To perform a differential analysis of the dentin soluble proteomic and assess the effects of tissue health state and protocol for protein extraction. We hypothesized the dentin soluble proteomic varies according to the tissue physiopathological state (intact vs. caries-affected) and protocol used to extract its proteins. METHODS: Dentin from freshly extracted non-carious and carious teeth were randomly assigned for protein extraction using either guanidine-HCl/ethylenediaminetetraacetic acid (EDTA) or acetic acid. Protein extracts from intact and caries-affected dentin were processed and digested with trypsin for shotgun label-free proteomic analysis (nLC-ESI-MS/MS). Peptides identification was performed on a nanoACQUITY UPLC-Xevo Q-Tof MS system. Peptides identified with scores of confidence greater than 95% were included in the quantitative statistical analysis embedded in the PLGS software. Differences between experimental conditions were calculated using Student test-t with significance pre-set at α=0.05. RESULTS: A total of 158 human proteins were identified. Approximately one-sixth of proteins (24/158) were present in at least two different extracts. Conversely, the greatest number of proteins (134/158) was identified uniquely in only one of the extracts. Overall, a larger number of soluble proteins was retrieved from caries-affected than intact dentin (86/158). Likewise, a greater number of proteins was extracted by the guanidine-HCl/EDTA (106/158) in comparison to acetic acid protocol. Several proteins detected in dentin extracts, mainly those from caries-affected teeth, are biological and/or metabolically involved with tissue turnover/remodeling. CONCLUSION: The identity/abundance of soluble proteins retrieved from and remained in dentin noticeably depend on this tissue physiopathological state and protocol used to remove its minerals. CLINICAL SIGNIFICANCE: The present findings brought new insight into the proteomic phenotype of human dentin and may provide targets for the development of novel caries disease-prevention therapies.

Dentin primer based on a highly functionalized gelatin-methacryloyl hydrogel.

Gelatin-methacryloyl hydrogels (GelMA) have demonstrated their utility as scaffolds in a variety of tissue engineering applications. OBJECTIVES: In this study, a highly functionalized GelMA hydrogel was synthesized and assessed for degree of functionalization. As the proposed GelMA hydrogel was coupled to a visible-light photoinitiator, we hypothesized it might serve as base to formulate a model dentin primer for application in restorative dentistry. METHODS: GelMA was mixed with photoinitiator lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP), photopolymerized for 0-40 s using a dental light-curing device and tested for extrudability, degree of photo-crosslinking (DPxlink), water sorption/solubility/swelling (WS/SL/SW) and apparent modulus of elasticity (AE). Model dentin primer was prepared by mixing GelMA+LAP with a primer of a commercial three-step etch-and-rinse adhesive. After application of GelMA-based primer to acid-etched dentin, samples were bonded with correspondent adhesive agent, photopolymerized and had their immediate bond strength compared to control samples primed and bonded with the same commercial material. RESULTS: Extrudability of hydrogel was confirmed using a microsyringe to write the acronym "CDMI". DPxlink of GelMA+LAP changed significantly as a function of photopolymerization time (20 s < 30 s ≤ 40 s). WS, SL and SW were significantly reduced in hydrogels polymerized for 30 and 40 s. AE of hydrogels varied significantly as a function of photopolymerization time (20 s < 30 s ≤ 40 s; 20 s ‡ 40 s). Bond strength of dentin primed with GelMA-based primer was lower (∼29.3 MPa) but not significantly of that of control (∼34.6 MPa). CONCLUSIONS: Optimization of a GelMA-based dentin primers can lead to the development of promising biomimetic adhesives for dentin rehabilitation.

Changes to dentin extracellular matrix following treatment with plant-based polyphenols.

This study investigated whether treatment with plant-based polyphenols (PB-P) affected the biochemical and/or biomechanical properties of dentin extracellular matrix (ECM). Three PB-Ps were evaluated: luteolin (LT), galangin (GL), and proanthocyanidin (PAC). Because dentin ECM requires demineralization before treatment, this study also assessed the effect of these PB-Ps on dentin demineralized by two different chemicals. Dentin samples from extracted third molars were obtained, sectioned, and randomly assigned for demineralization with either phosphoric acid (PA) or ethylenediaminetetraacetic acid (EDTA). Following demineralization, baseline infrared (IR) spectra and apparent elastic modulus (AE) of each specimen were independently acquired. Based upon these initial tests, samples were randomly assigned to one of the PB-P treatments to ensure that distribution of baseline AE was similar across treatment groups. IR and AE specimens were individually immersed in either 0.2% LT, 0.4% GL or 1% PAC for 2 min. IR spectra of treated samples were compared to baseline IR spectra, looking for any interaction of PB-Ps with the demineralized dentin. The IR spectrum and AE of each PB-P-treated specimen were compared with their own correspondent baseline measurement. The ability of PB-Ps to inhibit proteolytic activity of dentin ECM was assessed by the hydroxyproline assay. Finally, the effect of PB-Ps on immediate bond strength of a dental adhesive to PA- or EDTA-etched dentin was also evaluated. PB-Ps exhibited distinctively binding affinity to dentin ECM and promoted significant increase in AE. PB-P treatment reduced the degradation rate of dentin ECM without causing detrimental effect on immediate bond strength to dentin. Our work represents the first-time that LT and GL have been assessed as dentin ECM biomodifiers.

Laser Photobiomodulation 808 nm: Effects on Gene Expression in Inflammatory and Osteogenic Biomarkers in Human Dental Pulp Stem Cells.

The tissue engineering of dental oral tissue is tackling significant advances and the use of stem cells promises to boost the therapeutical approaches of regenerative dentistry. Despite advances in this field, the literature is still scarce regarding the modulatory effect of laser photobiomodulation (PBM) on genes related to inflammation and osteogenesis in Postnatal Human Dental Pulp Stem cells (DPSCs). This study pointedly investigated the effect of PBM treatment in proliferation, growth and differentiation factors, mineralization, and extracellular matrix remodeling genes in DPSCs. Freshly extracted human third molars were used as a source for DPSCs isolation. The isolated DPSCs were stimulated to an inflammatory state, using a lipopolysaccharide (LPS) model, and then subjected or not to laser PBM. Each experiment was statistically evaluated according to the sample distribution. A total of 85 genes related to inflammation and osteogenesis were evaluated regarding their expression by RT-PCR. Laser PBM therapy has shown to modulate several genes expression in DPSCs. PBM suppressed the expression of inflammatory gene TNF and RANKL and downregulated the gene expression for VDR and proteolytic enzymes cathepsin K, MMP-8 and MMP-9. Modulation of gene expression for proteinase-activated receptors (PARs) following PBM varied among different PARs. As expected, PBM blocked the odontoblastic differentiation of DPSCs when subjected to LPS model. Conversely, PBM has preserved the odontogenic potential of DPSCs by increasing the expression of TWIST-1/RUNEX-2/ALP signaling axis. PBM therapy notably played a role in the DPSCs genes expression that mediate inflammation process and tissue mineralization. The present data opens a new perspective for PBM therapy in mineralized dental tissue physiology.

Performance of MDP-based system in eroded and carious dentin associated with proteolytic inhibitors: 18-Month exploratory study.

The aim of this study was to explore the impact of the interaction between an MDP-based universal adhesive system in etch-and-rinse mode and two proteolytic inhibitors on the longevity of restorations bonded to artificially-affected-dentin substrates. 90 sound human third molars were randomly distributed into three groups according to the substrate: N-no challenges-control (stored in artificial saliva), ACD-artificial caries dentin (6 h DE + 18 h-RE/5 days + 48 h RE) and ERO-artificial erosion dentin (3 × 5 min/5 days with orange juice). They were further redistributed according to dentin pretreatment: W- water (control), CHX-2% digluconate chlorhexidine and E64- 5 µM E64-Trans-Epoxysuccinyl-L-Leucylamido-(4-guanidino) butane, which resulted in the following 9 groups (n = 10): N-W, N-CHX, N-E64, ACD-W, ACD-CHX, ACD-E64, ERO-W, ERO-CHX and ERO-E64. All specimens were restored with Adper Single Bond Universal (Etch-and-rinse mode)/Filtek Z250. Sticks (0.64 mm2) were obtained and subjected to microtensile test (µTBS) in a universal testing machine at 0.5 mm/min for 7-days, 6 and 18-month analyses. Failure modes were classified using optical microscopy (40X). Data were statistically analyzed by three-way ANOVA and Tukey tests (p < 0.05). All individual factors (p < 0.0001) and interaction between factors were statistically significant (substrate X pretreatment (p = 0.00093); substrate X time (p = 0.01035) and pretreatment X time (p = 0.0035). Caries-affected substrate was the most compromised one, disregarding the pretreatment. CHX was mostly affected compared with E64 up to 18 months, possibly due to its calcium-dependent mechanism.

Profile of a 10-MDP-based universal adhesive system associated with chlorhexidine: Dentin bond strength and in situ zymography performance.

The incorporation of functional monomers and proteolytic inhibitors into adhesive systems have shown to be promising strategies to improve the longevity of adhesive restorations. The aim of this study was to evaluate the long-term bonding performance and anti-gelatinolytic effect of a 10-MDP-based universal adhesive system applied in combination with 2% chlorhexidine digluconate (CHX). For that, this study assessed the resin-dentin bond strength and the in situ gelatinolytic activity profile at the adhesive interface at initial and after 6 month of storage. One hundred and two sound human third molars were prepared and randomly divided into 3 groups according to the adhesive strategy: SB (two-step etch-and-rinse adhesive, Adper Single Bond 2, 10-MDP-free control group); SU-ER (Adper Single Bond Universal, 10-MDP containing universal adhesive applied on etch-and-rinse mode); and SU-SE (SU applied on self-etching mode). The groups were subdivided into two according to the dentin pretreatment: W - water or CHX- 2% chlorhexidine digluconate aqueous solution (SB-W; SB-CHX; SU-ER-W; SU-ER-CHX; SU-SE-W; SU-SE-CHX) and subsequently restored according to the manufacturer's instructions. Bond strength (n = 12) was assessed by a microtensile test (µTBS) (500N/0.5 mm/min) after 24h or after 6 months of storage. In situ zymography was performed to evaluate anti-gelatinolytic activity (n = 5). Resin-dentin samples were incubated with fluorescein-conjugated gelatin for 24 h at 37 °C and analyzed by confocal laser scanning microscopy. Fluorescence indicating gelatinolytic activity at hybrid layer zone and adjacencies was quantified using Image J. Data was analyzed by three-way ANOVA and Tukey post-hoc tests (p < 0.05). Results: SU-SE showed the highest bond strength values, while similar results were observed for SU-ER and SB. No statistical significant differences were observed between pretreatment (CHX vs. W) or storage time (initial vs. 6 months of aging). For in situ zymography, fluorescence was detected in all groups and CHX pre-treatment was able to inhibit the gelatinolytic activity in all conditions. The 10-MDP-based universal adhesive system in self-etching mode was the strategy that showed the best bonding performance irrespective of its combination with chlorhexidine. Pre-treatment with CHX did not impair the bond strength when used in combination with 10-MDP and it may promote collagen stability overtime.

Insights into cathepsin-B activity in mature dentin matrix.

OBJECTIVE: Cysteine proteases are lysosomal enzymes that, under specific circumstances, may be secreted into the extracellular space and participate in protein turnover. This study investigated the involvement of cathepsin B in the gelatinolytic activity of mature dentin matrices at neutral pH. DESIGN: Human dentin fragments were made into powder and enzymes were extracted using guanidine-HCl/EDTA. Host-derived dentin proteases (cathepsin B, MMP-2 and MMP-9) were identified by immunoblotting, and their activities were evaluated spectrofluorimetrically using fluorogenic substrates. Proteases activities were monitored by measuring the rate of hydrolysis of substrates in the presence/absence of MMP- or cysteine cathepsin inhibitors, at neutral pH (7.4). Mass spectroscopy was used to determine the substrates' cleavage points. Reverse zymography was performed to examine the gelatinolytic activity of cathepsin B. RESULTS: Western-blots of dentin extracts yielded strong bands at 95, 72 and 30 kDa, corresponding respectively to MMP-9, MMP-2 and Cathepsin B. Greater fluorogenic substrates hydrolysis occurred in the absence of MMP and cysteine cathepsin inhibitors than in their presence. Cathepsin B exhibited significant gelatinolytic activity. CONCLUSIONS: Together with MMP-2 and MMP-9, cathepsin B also account for the host-derived gelatinolytic activity and matrix turnover of mature dentin at physiological, neutral pH.

Effect of protease inhibitor specificity on dentin matrix properties.

OBJECTIVE: To evaluate protease activity of dentin matrices subjected to treatment with non-specific (chlorhexidine - CHX), cysteine cathepsin specific (E-64), and cysteine cathepsin-K (CT-K) specific (Odanacatib - ODN) inhibitors. METHODS: Pulverized dentin powder obtained from human dentin disks (0.5 mm thickness) completely demineralized with 10% H3PO4 were challenged in 1 mL lactic acid (LA) (0.1M, pH 5.5) or stored in deionized water for 30 min. Aliquots of dentin powder were then immersed in 1 mL of CHX (2%), E-64 (10 µM and 20 µM) or Odanacatib (0.2 nM and 1 µM) for 30min. Degradation of dentin collagen was determined by telopeptide assays measuring the sub-product release of C-terminal cross-linked telopeptides (ICTP) and C-terminal peptide (CTX) in incubation media, which correlates with matrix metalloproteinases (MMP) and CT-K activities respectively (n = 3). The ICTP and CTX data were normalized to concentration of total protein (ICTPtp and CTXtp) in the media, measured by bicinchoninic acid assay. Dentin matrix properties were also measured by gravimetric change (n = 8) and ultimate tensile strength (UTS) (n = 10). Data were analyzed by one-way ANOVA followed by Tukey's post-hoc test and independent t-test (α = 5%). RESULTS: Telopeptide assays showed significantly lower CTXtp values after treatment with E-64 and Odanacatib. E-64 and Odanacatib at all tested concentrations significantly reduced the release of ICTPtp. Gravimetric analysis showed no significant difference between the tested inhibitors and control except for CHX after lactic acid challenge. UTS results showed significantly higher values for E-64 (20 µM) and Odanacatib (0.2 nM and 1 µM) groups in deionized water. SIGNIFICANCE: Dentin therapies targeting enzymes such as CT-K by specific inhibitors may provide superior pharmacokinetics and optimum efficacy due to precise protein binding, consequently limiting collagen degradation directly or indirectly by enzyme related pathways.

Profiling cytokine levels in chlorhexidine and EGCG-treated odontoblast-like cells.

OBJECTIVE: To screen the effect of two compounds, chlorhexidine diacetate (CHX) and epigallocatechin-gallate (EGCG), on the levels of cytokines produced by odontoblast-like cells (MDPC-23). METHODS: Cells were seeded at 24h and 48h with serial dilution of the compounds to determine cell metabolic activity by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay (n=3). Cells with no compound treatment were used as control (Ctr). For the highest equal non-cytotoxic compound dilution tested at 48h cell treatment, total protein concentration was measured using a Pierce bicinchoninic acid (BCA) assay (n=3), and expression of 23 cytokines was analyzed using the Bio-Plex cytokine assay (n=2). Data were analyzed by one-way ANOVA and Tukey's test (α=5%). RESULTS: The MTT assay revealed that at 24h and 48h, CHX and EGCG did not reduce cell metabolic activity at concentrations of 2.5-20µM (CHX) and 2.5-160µM (EGCG), respectively (p>0.05). At 48h, total protein levels were consistent across all groups for 20µM compound dilution (Ctr: 1.04mg/mL; CHX: 0.98mg/mL; and EGCG: 1.06mg/mL). At 20µM dilution, both CHX and EGCG significantly increased the secretion of IL-1ß, IL-10, IL-12, KC, MIP-1α, IFN-γ and IL-6 (p<0.05). Treatment with CHX significantly increased secretion of IL-4 and RANTES (p<0.05). TREATMENT: with EGCG significantly increased Eotaxin secretion (p<0.05). Both CHX and EGCG significantly decreased secretion of IL-17 (p<0.05). GM-CSF and TNF-α did not present significant change in secretion after treatment with either CHX or EGCG (p>0.05). SIGNIFICANCE: Both CHX and EGCG modulate secretion of various inflammatory and anti-inflammatory mediators in odontoblastic cells.

Co-distribution of cysteine cathepsins and matrix metalloproteases in human dentin.

It has been hypothesized that cysteine cathepsins (CTs) along with matrix metalloproteases (MMPs) may work in conjunction in the proteolysis of mature dentin matrix. The aim of this study was to verify simultaneously the distribution and presence of cathepsins B (CT-B) and K (CT-K) in partially demineralized dentin; and further to evaluate the activity of CTs and MMPs in the same tissue. The distribution of CT-B and CT-K in sound human dentin was assessed by immunohistochemistry. A double-immunolabeling technique was used to identify, at once, the occurrence of those enzymes in dentin. Activities of CTs and MMPs in dentin extracts were evaluated spectrofluorometrically. In addition, in situ gelatinolytic activity of dentin was assayed by zymography. The results revealed the distribution of CT-B and CT-K along the dentin organic matrix and also indicated co-occurrence of MMPs and CTs in that tissue. The enzyme kinetics studies showed proteolytic activity in dentin extracts for both classes of proteases. Furthermore, it was observed that, at least for sound human dentin matrices, the activity of MMPs seems to be predominant over the CTs one.

Effect of sealing infected dentin with glass ionomer cement on the abundance and localization of MMP-2, MMP-8, and MMP-9 in young permanent molars in vivo.

BACKGROUND: The study of MMPs' behavior in carious lesions contributes to the understanding of the mechanisms involved in dentin reorganization after restoration. AIM: To compare the abundance and localization of MMPs 2, 8, and 9 in infected dentin before and after restoration. DESIGN: The sample consisted of 23 young permanent molars with active deep carious lesions. Infected carious dentin samples were collected from the same tooth at baseline and 60 days after cavity lining with GIC and composite resin restoration and processed for immunohistochemistry assays. After digital images were obtained, two calibrated operators analyzed the samples according to the immunostaining intensity and the MMPs' localization. Chi-square test was used for statistical analysis. RESULTS: The intensity of immunostaining for MMP-8 was reduced after 60 days (P = 0.02), and no difference was observed for MMP-2 (P = 0.32) and MMP-9 (P = 0.14). The MMPs' distribution was generalized in the intertubular dentin and absent or located in the intratubular dentin, regardless of the period. CONCLUSION: The sealing of infected carious dentin in young permanent molars reduced the expression of MMP-8, which is consistent with the initial remodeling process of the dentin matrix.

Chlorhexidine does not improve but preserves bond strength to eroded dentin.

PURPOSE: To evaluate the effect of aqueous solutions of chlorhexidine digluconate (CHX) in different concentrations on bond strength to eroded dentin up to 6 months, using normal dentin as a control. METHODS: Exposed flat dentin of extracted third molars was only ground with 600-grit SiC paper/1 minute (normal dentin - N), or subsequently eroded by a regular-cola soft-drink (eroded dentin - E). N and E were acid-etched, washed, dried and rehydrated with 1.5 µL, respectively, of distillated water (control - NC / EC); of 0.004% CHX (N0.004% / E0.004%); or of 2% CHX (N2% / E2%). Adper Single Bond 2 was applied in all specimens and resin composite buildups were constructed with Filtek Z350. Specimens were sectioned in beams, which were tested (µTBS) immediately or after 6 months of aging. RESULTS: Microtensile bond strength to eroded dentin was always significantly lower than that to normal dentin. Application of tested CHX solutions did not exert a significant effect immediately; however, after aging, the 2% CHX prevented abrupt bond strength loss both to eroded and normal dentin.

Matrix metalloproteinases and other matrix proteinases in relation to cariology: the era of 'dentin degradomics'.

Dentin organic matrix, with type I collagen as the main component, is exposed after demineralization in dentinal caries, erosion or acidic conditioning during adhesive composite restorative treatment. This exposed matrix is prone to slow hydrolytic degradation by host collagenolytic enzymes, matrix metalloproteinases (MMPs) and cysteine cathepsins. Here we review the recent findings demonstrating that inhibition of salivary or dentin endogenous collagenolytic enzymes may provide preventive means against progression of caries or erosion, just as they have been shown to retain the integrity and improve the longevity of resin composite filling bonding to dentin. This paper also presents the case that the organic matrix in caries-affected dentin may not be preserved as intact as previously considered. In partially demineralized dentin, MMPs and cysteine cathepsins with the ability to cleave off the terminal non-helical ends of collagen molecules (telopeptides) may lead to the gradual loss of intramolecular gap areas. This would seriously compromise the matrix ability for intrafibrillar remineralization, which is considered essential in restoring the dentin's mechanical properties. More detailed data of the enzymes responsible and their detailed function in dentin-destructive conditions may not only help to find new and better preventive means, but better preservation of demineralized dentin collagenous matrix may also facilitate true biological remineralization for the better restoration of tooth structural and mechanical integrity and mechanical properties.

Can quaternary ammonium methacrylates inhibit matrix MMPs and cathepsins?

OBJECTIVE: Dentin matrices release ICTP and CTX fragments during collagen degradation. ICTP fragments are known to be produced by MMPs. CTX fragments are thought to come from cathepsin K activity. The purpose of this study was to determine if quaternary methacrylates (QAMs) can inhibit matrix MMPs and cathepsins. METHODS: Dentin beams were demineralizated, and dried to constant weight. Beams were incubated with rh-cathepsin B, K, L or S for 24h at pH 7.4 to identify which cathepsins release CTX at neutral pH. Beams were dipped in ATA, an antimicrobial QAM to determine if it can inhibit dentin matrix proteases. Other beams were dipped in another QAM (MDPB) to determine if it produced similar inhibition of dentin proteases. RESULTS: Only beams incubated with cathepsin K lost more dry mass than the controls and released CTX. Dentin beams dipped in ATA and incubated for 1 week at pH 7.4, showed a concentration-dependent reduction in weight-loss. There was no change in ICTP release from control values, meaning that ATA did not inhibit MMPs. Media concentrations of CTX fell significantly at 15wt% ATA indicating that ATA inhibits capthesins. Beams dipped in increasing concentrations of MDPB lost progressively less mass, showing that MDPB is a protease-inhibitor. ICTP released from controls or beams exposed to low concentrations were the same, while 5 or 10% MDPB significantly lowered ICTP production. CTX levels were strongly inhibited by 2.5-10% MDPB, indicating that MDPB is a potent inhibitor of both MMPs and cathepsin K. SIGNIFICANCE: CTX seems to be released from dentin matrix only by cathepsin K. MMPs and cathepsin K and B may all contribute to matrix degradation.

Influence of chlorhexidine digluconate on the clinical performance of adhesive restorations: a 3-year follow-up.

OBJECTIVES: The aim of this clinical study was to evaluate the long-term clinical performance of non-carious Class V restorations with and without application of chlorhexidine digluconate to acid-etched dentine. METHODS: After the approval of the Ethics and Informed Consent Committee, 70 non-carious cervical lesions were selected and randomly assigned into two groups, according to the split mouth design. The control group was restored with a two-step etch-and-rinse adhesive (Adper Single Bond 2) following manufacturer's instructions; whereas in the experimental group 2% chlorhexidine digluconate solution was applied to acid etched dentine for 30s after etching and prior to the adhesive application. All lesions were restored with a nanofilled composite resin (Filtek Supreme XT) and polymerized with a light-curing unit operating at 600mW/cm(2). Clinical performance was recorded after 1 week, 6, 12, and 36 months using modified Ryge/USPHS criteria in terms of retention, marginal discoloration, marginal integrity, post-operative sensitivity, and secondary caries incidence. Data were analyzed using Chi-Square, Fisher's exact test and McNemar tests (α=.05). RESULTS: After 36 months the control group showed a success rate of 88% in comparison to 76% of experimental group; however, no statistically difference between them was found (p=.463). Moreover, no statistical differences were observed between groups in the criteria post-operative sensitivity, marginal discoloration, marginal integrity, and secondary caries incidence between the two groups. CONCLUSION: The addition of 2% chlorhexidine digluconate conditioning step does not improve the clinical durability of adhesive restorations.

Transdentinal cytotoxicity of experimental adhesive systems of different hydrophilicity applied to ethanol-saturated dentin.

The aim of this study was to evaluate the transdentinal cytotoxicity of experimental adhesive systems (EASs) with different hydrophilicity and dentin saturation solutions on odontoblast-like cells. One hundred 0.4-mm-thick dentin discs were mounted in in vitro pulp chambers and assigned to 10 groups. MDPC-23 cells were seeded onto the pulpal side of the discs, incubated for 48h. The EASs with increasing hydrophilicity (R1, R2, R3 and R4) were applied to the occlusal side after etching and saturation of etched dentin with water or ethanol. R0 (no adhesive) served as controls. R1 is a non-solvated hydrophobic blend, R2 is similar to a simplified etch-and-rinse adhesive system and R3 and R4 are similar to self-etching adhesives. After 24h, cell metabolism was evaluated by MTT assay (n=8 discs) and cell morphology was examined by SEM (n=2 discs). Type of cell death was identified by flow cytometry and the degree of monomer conversion (%DC) was determined by infrared spectroscopy (FTIR) after 10s or 20s of photoactivation. Data were analyzed by the Kruskal-Wallis and Mann-Whitney tests (α=0.05). Dentin saturation with ethanol resulted in higher necrotic cell death ratios for R2, R3 and R4 compared with water saturation, although R2 and R3 induced higher SDH production. Photoactivation for 20s significantly improved the %DC of all EASs compared with 10s. A significant positive correlation was observed between the degree of hydrophilicity and %DC. In conclusion, except for R1, dentin saturation with ethanol increased the cytotoxicity of EASs, as expressed by the induction of necrotic cell death.