High-Oleic Sunflower Oil as a Potential Substitute for Palm Oil in Sugar Coatings-A Comparative Quality Determination Using Multispectral Imaging and an Electronic Nose.

Palm oil has a bad reputation due to the exploitation of farmers and the destruction of endangered animal habitats. Therefore, many consumers wish to avoid the use of palm oil. Decorative sugar contains a small amount of palm oil to prevent the sugar from melting on hot bakery products. High-oleic sunflower oil used as a substitute for palm oil was analyzed in this study via multispectral imaging and an electronic nose, two methods suitable for potential large-batch analysis of sugar/oil coatings. Multispectral imaging is a nondestructive method for comparing the wavelength reflections of the surface of a sample. Reference samples enabled the estimation of the quality of unknown samples, which were confirmed via acid value measurements. Additionally, for quality determination, volatile compounds from decorative sugars were measured with an electronic nose. Both applications provide comparable data that provide information about the quality of decorative sugars.

Multispectral imaging for distinguishing hybrid forest seeds of Corymbia spp. and Eucalyptus spp. from their progenitors.

In the forest industry, interspecific hybridization, such as Eucalyptus urograndis (Eucalyptus grandis × Eucalyptus urophylla) and Corymbia maculata × Corymbia torelliana, has led to the development of high-performing F1 generations. The successful breeding of these hybrids relies on verifying progenitor origins and confirming post-crossing, but conventional genotype identification methods are resource-intensive and result in seed destruction. As an alternative, multispectral imaging analysis has emerged as an efficient and non-destructive tool for seed phenotyping. This approach has demonstrated success in various crop seeds. However, identifying seed species in the context of forest seeds presents unique challenges due to their natural phenotypic variability and the striking resemblance between different species. This study evaluates the efficacy of spectral imaging analysis in distinguishing hybrid seeds of E. urograndis and C. maculata × C. torelliana from their progenitors. Four experiments were conducted: one for Corymbia spp. seeds, one for each Eucalyptus spp. batch separately, and one for pooled batches. Multispectral images were acquired at 19 wavelengths within the spectral range of 365-970 nm. Classification models based on Linear Discriminant Analysis (LDA), Random Forest (RF), and Support Vector Machine (SVM) was created using reflectance and reflectance features, combined with color, shape, and texture features, as well as nCDA transformed features. The LDA algorithm, combining all features, provided the highest accuracy, reaching 98.15% for Corymbia spp., and 92.75%, 85.38, and 86.00 for Eucalyptus batch one, two, and pooled batches, respectively. The study demonstrated the effectiveness of multispectral imaging in distinguishing hybrid seeds of Eucalyptus and Corymbia species. The seeds' spectral signature played a key role in this differentiation. This technology holds great potential for non-invasively classifying forest seeds in breeding programs.

Microbiological Quality Estimation of Meat Using Deep CNNs on Embedded Hardware Systems.

Spectroscopic sensor imaging of food samples meta-processed by deep machine learning models can be used to assess the quality of the sample. This article presents an architecture for estimating microbial populations in meat samples using multispectral imaging and deep convolutional neural networks. The deep learning models operate on embedded platforms and not offline on a separate computer or a cloud server. Different storage conditions of the meat samples were used, and various deep learning models and embedded platforms were evaluated. In addition, the hardware boards were evaluated in terms of latency, throughput, efficiency and value on different data pre-processing and imaging-type setups. The experimental results showed the advantage of the XavierNX platform in terms of latency and throughput and the advantage of Nano and RP4 in terms of efficiency and value, respectively.

Fluorescence spectroscopy and multispectral imaging for fingerprinting of aflatoxin-B1 contaminated (Zea mays L.) seeds: a preliminary study.

Cereal seeds safety may be compromised by the presence of toxic contaminants, such as aflatoxins. Besides being carcinogenic, they have other adverse health effects on humans and animals. In this preliminary study, we used two non-invasive optical techniques, optical fiber fluorescence spectroscopy and multispectral imaging (MSI), for discrimination of maize seeds naturally contaminated with aflatoxin B1 (AFB1) from the uncontaminated seeds. The AFB1-contaminated seeds exhibited a red shift of the emission maximum position compared to the control samples. Using linear discrimination analysis to analyse fluorescence data, classification accuracy of 100% was obtained to discriminate uncontaminated and AFB1-contaminated seeds. The MSI analysis combined with a normalized canonical discriminant analysis, provided spectral and spatial patterns of the analysed seeds. The AFB1-contaminated seeds showed a 7.9 to 9.6-fold increase in the seed reflectance in the VIS region, and 10.4 and 12.2-fold increase in the NIR spectral region, compared with the uncontaminated seeds. Thus the MSI method classified successfully contaminated from uncontaminated seeds with high accuracy. The results may have an impact on development of spectroscopic non-invasive methods for detection of AFs presence in seeds, providing valuable information for the assessment of seed adulteration in the field of food forensics and food safety.

Multispectral and X-ray images for characterization of Jatropha curcas L. seed quality.

BACKGROUND: The use of non-destructive methods with less human interference is of great interest in agricultural industry and crop breeding. Modern imaging technologies enable the automatic visualization of multi-parameter for characterization of biological samples, reducing subjectivity and optimizing the analysis process. Furthermore, the combination of two or more imaging techniques has contributed to discovering new physicochemical tools and interpreting datasets in real time. RESULTS: We present a new method for automatic characterization of seed quality based on the combination of multispectral and X-ray imaging technologies. We proposed an approach using X-ray images to investigate internal tissues because seed surface profile can be negatively affected, but without reaching important internal regions of seeds. An oilseed plant (Jatropha curcas) was used as a model species, which also serves as a multi-purposed crop of economic importance worldwide. Our studies included the application of a normalized canonical discriminant analyses (nCDA) algorithm as a supervised transformation building method to obtain spatial and spectral patterns on different seedlots. We developed classification models using reflectance data and X-ray classes based on linear discriminant analysis (LDA). The classification models, individually or combined, showed high accuracy (> 0.96) using reflectance at 940 nm and X-ray data to predict quality traits such as normal seedlings, abnormal seedlings and dead seeds. CONCLUSIONS: Multispectral and X-ray imaging have a strong relationship with seed physiological performance. Reflectance at 940 nm and X-ray data can efficiently predict seed quality attributes. These techniques can be alternative methods for rapid, efficient, sustainable and non-destructive characterization of seed quality in the future, overcoming the intrinsic subjectivity of the conventional seed quality analysis.

Quantitative surface topography assessment of directly compressed and roller compacted tablet cores using photometric stereo image analysis.

Surface topography, in the context of surface smoothness/roughness, was investigated by the use of an image analysis technique, MultiRay™, related to photometric stereo, on different tablet batches manufactured either by direct compression or roller compaction. In the present study, oblique illumination of the tablet (darkfield) was considered and the area of cracks and pores in the surface was used as a measure of tablet surface topography; the higher a value, the rougher the surface. The investigations demonstrated a high precision of the proposed technique, which was able to rapidly (within milliseconds) and quantitatively measure the obtained surface topography of the produced tablets. Compaction history, in the form of applied roll force and tablet punch pressure, was also reflected in the measured smoothness of the tablet surfaces. Generally it was found that a higher degree of plastic deformation of the microcrystalline cellulose resulted in a smoother tablet surface. This altogether demonstrated that the technique provides the pharmaceutical developer with a reliable, quantitative response parameter for visual appearance of solid dosage forms, which may be used for process and ultimately product optimization.

Comparison of a multispectral vision system and a colorimeter for the assessment of meat color.

The color assessment ability of a multispectral vision system is investigated by a comparison study with color measurements from a traditional colorimeter. The experiment involves fresh and processed meat samples. Meat is a complex material; heterogeneous with varying scattering and reflectance properties, so several factors can influence the instrumental assessment of meat color. In order to assess whether two methods are equivalent, the variation due to these factors must be taken into account. A statistical analysis was conducted and showed that on a calibration sheet the two instruments are equally capable of measuring color. Moreover the vision system provides a more color rich assessment of fresh meat samples with a glossier surface, than the colorimeter. Careful studies of the different sources of variation enable an assessment of the order of magnitude of the variability between methods accounting for other sources of variation leading to the conclusion that color assessment using a multispectral vision system is superior to traditional colorimeter assessments.

Chemical imaging and solid state analysis at compact surfaces using UV imaging.

Fast non-destructive multi-wavelength UV imaging together with multivariate image analysis was utilized to visualize distribution of chemical components and their solid state form at compact surfaces. Amorphous and crystalline solid forms of the antidiabetic compound glibenclamide, and microcrystalline cellulose together with magnesium stearate as excipients were used as model materials in the compacts. The UV imaging based drug and excipient distribution was in good agreement with hyperspectral NIR imaging. The UV wavelength region can be utilized in distinguishing between glibenclamide and excipients in a non-invasive way, as well as mapping the glibenclamide solid state form. An exploratory data analysis supported the critical evaluation of the mapping results and the selection of model parameters for the chemical mapping. The present study demonstrated that the multi-wavelength UV imaging is a fast process analytical technique with the potential for real-time monitoring of critical quality attributes.

OvaSpec - A vision-based instrument for assessing concentration and developmental stage of Trichuris suis parasite egg suspensions.

BACKGROUND: OvaSpec is a new, fully automated, vision-based instrument for assessing the quantity (concentration) and quality (embryonation percentage) of Trichuris suis parasite eggs in liquid suspension. The eggs constitute the active pharmaceutical ingredient in a medicinal drug for the treatment of immune-mediated diseases such as Crohn׳s disease, ulcerative colitis, and multiple sclerosis. METHODS: This paper describes the development of an automated microscopy technology, including methodological challenges and design decisions of relevance for the future development of comparable vision-based instruments. Morphological properties are used to distinguish eggs from impurities and two features of the egg contents under brightfield and darkfield illumination are used in a statistical classification to distinguish eggs with undifferentiated contents (non-embryonated eggs) from eggs with fully developed larvae inside (embryonated eggs). RESULTS: For assessment of the instrument׳s performance, six egg suspensions of varying quality were used to generate a dataset of unseen images. Subsequently, annotation of the detected eggs and impurities revealed a high agreement with the manual, image-based assessments for both concentration and embryonation percentage (both error rates <1.0%). Similarly, a strong correlation was demonstrated in a final, blinded comparison with traditional microscopic assessments performed by an experienced laboratory technician. CONCLUSIONS: The present study demonstrates the applicability of computer vision in the production, analysis, and quality control of T. suis eggs used as an active pharmaceutical ingredient for the treatment of autoimmune diseases.

Potential of multispectral imaging technology for rapid and non-destructive determination of the microbiological quality of beef filets during aerobic storage.

The performance of a multispectral imaging system has been evaluated in monitoring aerobically packaged beef filet spoilage at different storage temperatures (0, 4, 8, 12, and 16°C). Spectral data in the visible and short wave near infrared area (405-970nm) were collected from the surface of meat samples and correlated with microbiological data (log counts), for total viable counts (TVCs), Pseudomonas spp., and Brochothrix thermosphacta. Qualitative analysis (PLS-DA) was employed for the discrimination of meat samples in three microbiological quality classes based on the values of total viable counts, namely Class 1 (TVC<5.5log10CFU/g), Class 2 (5.5log10CFU/g7.0log10CFU/g). Furthermore, PLS regression models were developed to provide quantitative estimations of microbial counts during meat storage. In both cases model validation was implemented with independent experiments at intermediate storage temperatures (2 and 10°C) using different batches of meat. Results demonstrated good performance in classifying meat samples with overall correct classification rate for the three quality classes ranging from 91.8% to 80.0% for model calibration and validation, respectively. For quantitative estimation, the calculated regression coefficients between observed and estimated counts ranged within 0.90-0.93 and 0.78-0.86 for model development and validation, respectively, depending on the microorganism. Moreover, the calculated average deviation between observations and estimations was 11.6%, 13.6%, and 16.7% for Pseudomonas spp., B. thermosphacta, and TVC, respectively. The results indicated that multispectral vision technology has significant potential as a rapid and non-destructive technique in assessing the microbiological quality of beef fillets.

Visual clone identification of Penicillium commune isolates.

A method for visual clone identification of Penicillium commune isolates was developed. The method is based on images of fungal colonies acquired after growth on a standard medium and involves a high degree of objectivity, which in future studies will make it possible for non-experts to perform a qualified identification of different species as well as clones within a species. A total of 77 P. commune isolates from a cheese dairy were 3-point inoculated on Yeast Extract Sucrose (YES) agar and incubated for 7 days at 25 degrees C. After incubation, the isolates were classified into groups containing the same genotype determined by DNA fingerprinting (AFLP). Each genotype also has a specific phenotype such as different colony colours. By careful image acquisition, colours were measured in a reproducible way. Prior to image analysis, each image was corrected with respect to colour, geometry and self-illumination, thereby gaining a set of directly comparable images. A method for automatic extraction of a given number of concentric regions was used. Using the positions of the regions, a number of relevant features--capturing colour and colour-texture from the surface of the fungal colonies--was extracted for further analysis. We introduced the Jeffreys-Matusitas (JM) distance between the feature distributions to express the similarity between regions in two colonies, and to evaluate the overall (weighted) similarity. The nearest neighbour (NN) classification rule was used. On a dataset from 137 isolates, we obtained a "leave-one-out" cross-validation identification rate of approximately 93-98% compared with the result of DNA fingerprinting.