Physicochemical properties and antibiofilm activity of mineral trioxide aggregate associated with farnesol.

This study assessed the physicochemical and antibiofilm properties of white mineral trioxide aggregate (MTA) associated with 1 or 2% of farnesol. Setting time was evaluated based on ISO 6876/2012. Radiopacity was evaluated by radiographic analysis. pH was assessed after time intervals of 1, 3, 7, 14, 21, and 28 days. Solubility (% mass loss) and volumetric change (by micro-CT) of the cements were evaluated after immersion in distilled water. The presence of voids inside the materials was assessed by using micro-CT. Antibiofilm activity against Enterococcus faecalis was evaluated by crystal violet assay and the modified direct contact test performed with biofilm previously formed on bovine root dentin for 14 days. Data were submitted to ANOVA/Tukey tests with 5% significance level. The incorporation of farnesol into MTA increased its setting time, but decreased its solubility at 30 days and its volumetric loss in all periods (p < 0.05). Radiopacity and solubility after 7 days were similar among the materials (p > 0.05). The association of farnesol showed the highest pH value after 1 and 3 days (p < 0.05). The association of farnesol with MTA promoted a decrease in the presence of voids, and increased the antimicrobial activity on biofilm biomass of E. faecalis (p < 0.05). In conclusion, the addition of farnesol can be suggested to improve the antimicrobial properties and the consistency of MTA.

Physicochemical properties and antibiofilm activity of mineral trioxide aggregate associated with farnesol

Abstract This study assessed the physicochemical and antibiofilm properties of white mineral trioxide aggregate (MTA) associated with 1 or 2% of farnesol. Setting time was evaluated based on ISO 6876/2012. Radiopacity was evaluated by radiographic analysis. pH was assessed after time intervals of 1, 3, 7, 14, 21, and 28 days. Solubility (% mass loss) and volumetric change (by micro-CT) of the cements were evaluated after immersion in distilled water. The presence of voids inside the materials was assessed by using micro-CT. Antibiofilm activity against Enterococcus faecalis was evaluated by crystal violet assay and the modified direct contact test performed with biofilm previously formed on bovine root dentin for 14 days. Data were submitted to ANOVA/Tukey tests with 5% significance level. The incorporation of farnesol into MTA increased its setting time, but decreased its solubility at 30 days and its volumetric loss in all periods (p < 0.05). Radiopacity and solubility after 7 days were similar among the materials (p > 0.05). The association of farnesol showed the highest pH value after 1 and 3 days (p < 0.05). The association of farnesol with MTA promoted a decrease in the presence of voids, and increased the antimicrobial activity on biofilm biomass of E. faecalis (p < 0.05). In conclusion, the addition of farnesol can be suggested to improve the antimicrobial properties and the consistency of MTA.

Effect of mechanical cleaning protocols in the fiber post space on the adhesive interface between universal adhesive and root dentin.

The aim of this study was to evaluate the effects of cleaning protocols on the presence of residues, open dentinal tubules, and bond strength of a self-etch adhesive plus a dual-cure resin cement to dentin in the fiber-post space. The methods for cleaning utilized were conventional irrigation (CI), rotary brush with continuous rotary movement (RB), and continuous ultrasonic irrigation (CUI). Sixty bovine incisors were used for fiber-post space preparation. Thirty roots were divided into three groups (n = 10) according to the cleaning protocols and submitted to scanning electron microscope to evaluate presence of residues and relative quantity of open dentinal tubules on dentin surface. Similar protocols were performed in the other thirty roots (n = 10) using a self-etching adhesive system (Scotchbond Universal) and a dual-cure resin cement (Relyx Unicem 2). After 6 months cervical, middle, and apical thirds sections of fiber-post space were submitted to push-out testing. To data ANOVA and Tukey's test were employed (α = 5%). RB and CUI showed the lowest presence of residues on dentin surface (p = .015) and the highest bond strength values (p < .001), regardless of the dentin third. CUI presented the highest quantity of open dentinal tubules in middle and apical thirds (p < .001). CI presented the lowest bond strength value of resin cement, regardless of dentin third (p < .001). Mechanical cleaning protocols, such as RB and CUI, presented better surface cleaning capabilities and higher bond strength than CI with dual-cure resin cement employed. The use of a mechanical cleaning protocol seems to cause appropriate condition on the root dentin surface. Mechanical cleaning of root dentin provided greater bond strength of the self-etching system with dual resin cement. Conventional irrigation did not provide adequate root dentin cleaning. RESEARCH HIGHLIGHTS: • The use of a mechanical cleaning protocol seems to cause appropriate condition on the root dentin surface. • Mechanical cleaning of root dentin provided greater bond strength of the self-etching system with dual resin cement. • Conventional irrigation did not provide adequate root dentin cleaning.

Physicochemical Properties of a Bioceramic Repair Material - BioMTA.

This study aimed to assess the physicochemical properties of a repair material in the Brazilian market, BioMTA, in comparison to other two materials currently in use (Biodentine and MTA Angelus). The initial setting time was evaluated using Gillmore needle. The pH was measured with a pH-meter after 24 h, 3, 7, 14 and 21 days. The radiopacity was determined using the equivalence in millimeters of aluminum (mm Al) from digitized occlusal radiographs. Solubility was determined after immersion in water for 7 days. The data were analyzed by one-way ANOVA and Tukey tests (a=0.05). The BioMTA initial setting time (5.2 min) was lower than the other materials (p<0.05). All materials showed an alkaline pH at 21 days. At 24 h, BioMTA was the most alkaline material (p<0.05); and at 3, 7, 14 and 21 days there was no difference between BioMTA and Biodentine (p>0.05), both being more alkaline than MTA Angelus (p<0.05). The radiopacity of BioMTA (4.2 mm Al) was significantly higher compared to Biodentine (p<0.05) and lower than MTA Angelus (p<0.05). The solubility of the materials was -4.2%, -1.6% and 4.1% for BioMTA, MTA Angelus and Biodentine, respectively, with a significant difference between them (p<0.05). Therefore, it can be concluded that BioMTA displayed a shorter setting time, an alkaline pH, a higher radiopacity, and a gain in mass.

Tratamento endodôntico de canino superior birradicular: relato de caso / Endodontic treatment of birradicular maxillary canine: case report

O presente artigo descreve um caso incomum de canino superior direito com duas raízes. Esse é o quarto caso relatado na literatura. Paciente do sexo feminino, 66 anos de idade, foi encaminhada para tratamento endodôntico do dente #13. A avaliação clínica mostrou que o dente #13 não apresentava resposta após o teste de vitalidade. Radiografias foram realizadas e revelaram que o dente #13 apresentava duas raízes. Em seguida, a paciente foi submetida a tratamento endodôntico. Esse relato de caso é relevante porque descreve uma variação anatômica rara, mas que pode se apresentar na clínica. Por tal motivo, o dentista precisa ter domínio da anatomia normal dos dentes para realizar corretamente o tratamento endodôntico, assim como conhecer as possíveis variações anatômicas, e analisar minuciosamente a radiografia de diagnóstico para ter uma noção individualizada da anatomia do dente a tratar (AU).

This paper describes an unusual case of right maxillary canine with two roots. This is the fourth finding that has been reported in the literature. A 66-year-old female patient was referred to endodontic treatment in the tooth #13. Clinical evaluation showed that tooth #13 presented no response after the vitality test. Radiographs were taken and revealed that the tooth #13 presented two roots. Then, the patient was submitted to endodontic treatment. This case report is relevant because it describes an atypical anatomical variation, but with possible occurrence in endodontic clinical. For this reason, the dentist needs to have knowledge of the normal anatomy of the teeth to correctly perform the endodontic treatment, as well as to know the possible anatomical variations, and to thoroughly analyze the diagnostic radiography to have an individualized notion of the anatomy of the tooth to be treated (AU).

Evaluation of dentin desensitization protocols on the dentinal surface and their effects on the dentin bond interface.

OBJECTIVES: To evaluate the effect of desensitizing agent containing calcium phosphate nanoparticles on the bond strength of etch-and-rinse adhesive system (Scotchbond Multi-Purpose), presence of precipitate, dentinal tubule obliteration and hybrid layer formation in dentin in comparison with potassium nitrate plus sodium fluoride or strontium chloride compounds. METHODS: 150 bovine incisors were treated with (n = 10): G1, Desensibilize Nano P (Ca3(PO4)2+5%KNO3+0.9%NaF); G2, Desensibilize (10%SrCl2+5%KNO3); G3, Desensibilize KF2% (5%KNO3+0.2%NaF); G4, Ultra EZ (3%KNO3+0.25%NaF) and G5, no treated (control). Scanning electron microscopy was used to assess the incidence of precipitates (500×) and obliterated dentinal tubule counts (1.000×). The adhesive system was used after all desensitization treatments. The bond strength (n = 40) and the fracture pattern were evaluated. Confocal laser microscopy was used to quantify the hybrid layer formation in dentin. RESULTS: G1 and G2 presented higher adhesive system bond strength (MPa) than G4 and G5, however no significant differences were observed in comparison with G3. Cohesive fracture was frequently found: G1 (58.5%), G2 (51.3%) and G3 (43.8%). G1 showed the highest incidence of precipitates and the highest number of blocked dentinal tubules. G1 and G2 presented similar hybrid layer formation and the highest hybrid layer formation values. CONCLUSIONS: Desensibilize Nano P (G1) favored the bond strength of the adhesive system to dentin, increased the precipitation of residues, obliteration of dentinal tubules, and hybrid layer formation in comparison with other agents. CLINICAL RELEVANCE: Desensitizers promote dentin obliteration, however, may affect dentin bonding.

Effects of different peracetic acid formulations on post space radicular dentin.

STATEMENT OF PROBLEM: The optimal irrigating solution with antimicrobial and dentin cleansing properties for post space preparation for fiber posts is unclear. Peracetic acid is one option but is available in various chemical formulations that require evaluation. PURPOSE: The purpose of this in vitro study was to evaluate dentin surface cleanliness based on the presence of a smear layer and the number of open dentin tubules. It also investigates the chemical composition of residues after canal irrigation with a 1% peracetic acid solution (PA) at low or high concentration of hydrogen peroxide during the preparation of intracanal fiber posts. MATERIAL AND METHODS: After filling the root canals of 40 mandibular incisors, a rotary instrument was used for intracanal preparation to place fiber posts. The teeth were divided into 4 groups (n=10) according to the post space irrigation protocol as follows: CG (control): distilled water; NA (NaOCl): 2.5% sodium hypochlorite; LH: PA with low concentration of hydrogen peroxide; and HH: PA with high concentrations of hydrogen peroxide. After irrigation, the teeth were sectioned, and the intracanal dentin surface was subjected to analysis using energy dispersive spectroscopy to evaluate chemical composition and to scanning electron microscopy (×500) to evaluate the presence of the smear layer. The number of open dentin tubules was measured by scanning electron microscopy analysis (×2000) using photo-editing software. ANOVA and the Tukey test (α=.05) were used to evaluate the data, except for the presence of a smear layer, for which the Kruskal-Wallis and Dunn tests were used (α=.05). RESULTS: The highest concentrations of oxygen in the dentin residues were detected in LH and HH (P<.05); CG and NA showed similar oxygen concentrations (P>.05). NA had a higher concentration of chlorine (P<.05), whereas LH had a lower amount of smear layer and a larger number of open dentin tubules than the other groups (P<.05). These were equivalent to each other (P>.05), except for HH, which also had a larger number of open dentin tubules than CG and NA (P<.05). CONCLUSIONS: PA 1% with a low concentration of hydrogen peroxide yielded a lower amount of smear layer and a larger number of open dentin tubules in the dentin of the post space when compared with PA 1% with a high concentration of hydrogen peroxide, despite maintaining a similar oxygen concentration in these dentin residues.