Experimental and simulation study of self-assembly and adsorption of glycerol monooleate in n-dodecane with varying water content onto iron oxide.

The self-assembly and surface adsorption of glycerol monooleate (GMO) in n-dodecane are studied using a combination of experimental and molecular dynamics simulation techniques. The self-assembly of GMO to form reverse micelles, with and without added water, is studied using small-angle neutron scattering and simulations. A large-scale simulation is also used to investigate the self-assembly kinetics. GMO adsorption onto iron oxide is studied using depletion isotherms, neutron reflectometry, and simulations. The adsorbed amounts of GMO, and any added water, are determined experimentally, and the structures of the adsorbed films are investigated using reflectometry. Detailed fitting and analysis of the reflectometry measurements are presented, taking into account various factors such as surface roughness, and the presence of impurities. The reflectometry measurements are complemented by molecular dynamics simulations, and good consistency between both approaches is demonstrated by direct comparison of measured and simulated reflectivity and scattering length density profiles. The results of this analysis are that in dry systems, GMO adsorbs as self-assembled reverse micelles with some molecules adsorbing directly to the surface through the polar head groups, while in wet systems, the GMO is adsorbed onto a thin layer of water. Only at high surface coverage is some water trapped inside a reverse-micelle structure; at lower surface coverages, the GMO molecules associate primarily with the water layer, rather than self-assemble.

Diblock bottlebrush polymer in a non-polar medium: Self-assembly, surface forces, and superlubricity.

Whilst bottlebrush polymers have been studied in aqueous media for their conjectured role in biolubrication, surface forces and friction mediated by bottlebrush polymers in non-polar media have not been previously reported. Here, small-angle neutron scattering (SANS) showed that a diblock bottlebrush copolymer (oligoethyleneglycol acrylate/ethylhexyl acrylate; OEGA/EHA) formed spherical core-shell aggregates in n-dodecane (a model oil) in the polymer concentration range 0.1-2.0 wt%, with a radius of gyration Rg âˆ¼ 7 nm, comprising 40-65 polymer molecules per aggregate. The surface force apparatus (SFA) measurements revealed purely repulsive forces between surfaces bearing inhomogeneous polymer layers of thickness L âˆ¼ 13-23 nm, attributed to adsorption of a mixture of polymer chains and surface-deformed micelles. Despite the surface inhomogeneity, the polymer layers could mediate effective lubrication, demonstrating superlubricity with the friction coefficient as low as µ ∼ 0.003. The analysis of velocity-dependence of friction using the Eyring model shed light on the mechanism of the frictional process. That is, the friction mediation was consistent with the presence of nanoscopic surface aggregates, with possible contributions from a gel-like network formed by the polymer chains on the surface. These unprecedented results, correlating self-assembled polymer micelle structure with the surface forces and friction the polymer layers mediate, highlight the potential of polymers with the diblock bottlebrush architecture widespread in biological living systems, in tailoring desired surface interactions in non-polar media.

Towards a neutron and X-ray reflectometry environment for the study of solid-liquid interfaces under shear.

A novel neutron and X-ray reflectometry sample environment is presented for the study of surface-active molecules at solid-liquid interfaces under shear. Neutron reflectometry was successfully used to characterise the iron oxide-dodecane interface at a shear rate of [Formula: see text] [Formula: see text] using a combination of conventional reflectometry theory coupled with the summation of reflected intensities to describe reflectivity from thicker films. Additionally, the structure adopted by glycerol monooleate (GMO), an Organic Friction Modifier, when adsorbed at the iron oxide-dodecane interface at a shear rate of [Formula: see text] [Formula: see text] was studied. It was found that GMO forms a surface layer that appears unaltered by the effect of shear, where the thickness of the GMO layer was found to be [Formula: see text] Å under direct shear at [Formula: see text] [Formula: see text] and [Formula: see text] Å when not directly under shear. Finally, a model to analyse X-ray reflectometry data collected with the sample environment is also described and applied to data collected at [Formula: see text] [Formula: see text].

Thiol-Bromo Click Reaction for One-Pot Synthesis of Star-Shaped Polymers.

Star-shaped polymers have unique physical properties and they are sought after materials in industry. However, the ease of synthesis is essential for translation of these materials into large-scale applications. Herein, a highly efficient synthetic method to prepare star-shaped polymers by combination of Cu-mediated reversible deactivation radical polymerization (Cu-RDRP) and thiol-bromo click reaction is described. Well-defined linear and block polymers with a very high bromine chain end fidelity are obtained via Cu-RDRP and subsequently react with multi-functional thiol compounds. High coupling efficiencies of larger than 90% are obtained owing to the quick and efficient reaction between thiols and alkyl bromides. Moreover, the arms of the obtained star-shaped polymers are linked via thioether bonds to the core, making them susceptible for oxidative degradation.

Segregation versus Interdigitation in Highly Dynamic Polymer/Surfactant Layers.

Many polymer/surfactant formulations involve a trapped kinetic state that provides some beneficial character to the formulation. However, the vast majority of studies on formulations focus on equilibrium states. Here, nanoscale structures present at dynamic interfaces in the form of air-in-water foams are explored, stabilised by mixtures of commonly used non-ionic, surface active block copolymers (Pluronic®) and small molecule ionic surfactants (sodium dodecylsulfate, SDS, and dodecyltrimethylammonium bromide, C12TAB). Transient foams formed from binary mixtures of these surfactants shows considerable changes in stability which correlate with the strength of the solution interaction which delineate the interfacial structures. Weak solution interactions reflective of distinct coexisting micellar structures in solution lead to segregated layers at the foam interface, whereas strong solution interactions lead to mixed structures both in bulk solution, forming interdigitated layers at the interface.

The effect of thiamine-coating nanoparticles on their biodistribution and fate following oral administration.

Thiamine-coated nanoparticles were prepared by two different preparative methods and evaluated to compare their mucus-penetrating properties and fate in vivo. The first method of preparation consisted of surface modification of freshly poly(anhydride) nanoparticles (NP) by simple incubation with thiamine (T-NPA). The second procedure focused on the preparation and characterization of a new polymeric conjugate between the poly(anhydride) backbone and thiamine prior the nanoparticle formation (T-NPB). The resulting nanoparticles displayed comparable sizes (about 200 nm) and slightly negative surface charges. For T-NPA, the amount of thiamine associated to the surface of the nanoparticles was 15 µg/mg. For in vivo studies, nanoparticles were labelled with either 99mTc or Lumogen® Red. T-NPA and T-NPB moved faster from the stomach to the small intestine than naked nanoparticles. Two hours post-administration, for T-NPA and T-NPB, >30% of the given dose was found in close contact with the intestinal mucosa, compared with a 13.5% for NP. Interestingly, both types of thiamine-coated nanoparticles showed a greater ability to cross the mucus layer and interact with the surface of the intestinal epithelium than NP, which remained adhered in the mucus layer. Four hours post-administration, around 35% of T-NPA and T-NPB were localized in the ileum of animals. Overall, both preparative processes yielded thiamine decorated carriers with similar physico-chemical and biodistribution properties, increasing the versatility of these nanocarriers as oral delivery systems for a number of biologically active compounds.

Assembly of small molecule surfactants at highly dynamic air-water interfaces.

Small-angle neutron scattering has been used to probe the interfacial structure of foams stabilised by small molecule surfactants at concentrations well below their critical micelle concentration. The data for wet foams showed a pronounced Q-4 dependence at low Q and noticeable inflexions over the mid Q range. These features were found to be dependent on the surfactant structure (mainly the alkyl chain length) with various inflexions across the measured Q range as a function of the chain length but independent of factors such as concentration and foam age/height. By contrast, foam stability (for C < CMC) was significantly different at this experimental range. Drained foams showed different yet equally characteristic features, including additional peaks attributed to the formation of classical micellar structures. Together, these features suggest the dynamic air-water interface is not as simple as often depicted, indeed the data have been successfully described by a model consisting paracrystalline stacks (multilayer) of adsorbed surfactant layers; a structure that we believe is induced by the dynamic nature of the air-water interface in a foam.

Linking micellar structures to hydrogelation for salt-triggered dipeptide gelators.

Some functionalised dipeptides can form hydrogels when salts are added to solutions at high pH. We have used surface tension, conductivity, rheology, optical, confocal and scanning electron microscopy, (1)H NMR and UV-Vis spectroscopy measurements to characterise fully the phase behaviour of solutions of one specific gelator, 2NapFF, at 25 °C at pH 10.5. We show that this specific naphthalene-dipeptide undergoes structural transformations as the concentration is increased, initially forming spherical micelles, then worm-like micelles, followed by association of these worm-like micelles. On addition of a calcium salt, gels are generally formed as long as worm-like micelles are initially present in solution, although there are structural re-organisations that occur at lower concentrations, allowing gelation at lower than expected concentration. Using IR and SANS, we show the differences between the structures present in the solution and hydrogel phases.

In Vitro Evaluation of the Interaction of Dextrin-Colistin Conjugates with Bacterial Lipopolysaccharide.

Dextrin-colistin conjugates have been developed with the aim of achieving reduced clinical toxicity associated with colistin, also known as polymyxin E, and improved targeting to sites of bacterial infection. This study investigated the in vitro ability of such dextrin-colistin conjugates to bind and modulate bacterial lipopolysaccharide (LPS), and how this binding affects its biological activity. These results showed that colistin and amylase-activated dextrin-colistin conjugate to a lesser extent induced aggregation of LPS to form a stacked bilayer structure with characteristic dimensions, although this did not cause any substantial change in its secondary structure. In biological studies, both colistin and dextrin-colistin conjugate effectively inhibited LPS-induced hemolysis and tumor necrosis factor α (TNFα) secretion in a concentration-dependent manner, but only dextrin-colistin conjugate showed no additive toxicity at higher concentrations. This study provides the first direct structural experimental evidence for the binding of dextrin-colistin conjugates and LPS and gives insight into the mode of action of dextrin-colistin conjugates.

Disarmed anthrax toxin delivers antisense oligonucleotides and siRNA with high efficiency and low toxicity.

Inefficient cytosolic delivery and vector toxicity contribute to the limited use of antisense oligonucleotides (ASOs) and siRNA as therapeutics. As anthrax toxin (Atx) accesses the cytosol, the purpose of this study was to evaluate the potential of disarmed Atx to deliver either ASOs or siRNA. We hypothesized that this delivery strategy would facilitate improved transfection efficiency while eliminating the toxicity seen for many vectors due to membrane destabilization. Atx complex formation with ASOs or siRNA was achieved via the in-frame fusion of either Saccharomyces cerevisiae GAL4 or Homo sapien sapien PKR (respectively) to a truncation of Atx lethal factor (LFn), which were used with Atx protective antigen (PA). Western immunoblotting confirmed the production of: LFN-GAL4, LFn-PKR and PA which were detected at ~45.9 kDa, ~37 kDa, and ~83 kDa respectively and small angle neutron scattering confirmed the ability of PA to form an annular structure with a radius of gyration of 7.0 ± 1.0 nm when placed in serum. In order to form a complex with LFn-GAL4, ASOs were engineered to contain a double-stranded region, and a cell free in vitro translation assay demonstrated that no loss of antisense activity above 30 pmol ASO was evident. The in vitro toxicity of both PA:LFn-GAL4:ASO and PA:LFn-PKR:siRNA complexes was low (IC50>100 µg/mL in HeLa and Vero cells) and subcellular fractionation in conjunction with microscopy confirmed the detection of LFn-GAL4 or LFn-PKR in the cytosol. Syntaxin5 (Synt5) was used as a model target gene to determine pharmacological activity. The PA:LFn-GAL4:ASO complexes had transfection efficiency approximately equivalent to Nucleofection® over a variety of ASO concentrations (24h post-transfection) and during a 72 h time course. In HeLa cells, at 200 pmol ASO (with PA:LFN-GAL4), 5.4 ± 2.0% Synt5 expression was evident relative to an untreated control after 24h. Using 200 pmol ASOs, Nucleofection® reduced Synt5 expression to 8.1 ± 2.1% after 24h. PA:LFn-GAL4:ASO transfection of non- or terminally-differentiated THP-1 cells and Vero cells resulted in 35.2 ± 19.1%, 36.4 ± 1.8% and 22.9 ± 6.9% (respectively) Synt5 expression after treatment with 200 pmol of ASO and demonstrated versatility. Nucleofection® with Stealth RNAi™ siRNA reduced HeLa Synt5 levels to 4.6 ± 6.1% whereas treatment with the PA:LFn-PKR:siRNA resulted in 8.5 ± 3.4% Synt5 expression after 24h (HeLa cells). These studies report for the first time an ASO and RNAi delivery system based upon protein toxin architecture that is devoid of polycations. This system may utilize regulated membrane back-fusion for the cytosolic delivery of ASOs and siRNA, which would account for the lack of toxicity observed. High delivery efficiency suggests further in vivo evaluation is warranted.

Probing the interaction of nanoparticles with mucin for drug delivery applications using dynamic light scattering.

Drug delivery via the eye, nose, gastrointestinal tract and lung is of great interest as they represent patient-compliant and facile methods to administer drugs. However, for a drug to reach the systemic circulation it must penetrate the "mucus barrier". An understanding of the characteristics of the mucus barrier is therefore important in the design of mucus penetrating drug delivery vehicles e.g. nanoparticles. Here, a range of nanoparticles - silica, aluminium coated silica, poly (lactic-co-glycolic acid) (PLGA) and PEGylated PLGA - each with known but different physicochemical characteristics were examined in the presence of mucin to identify those characteristics that engender nanoparticle/mucin interactions and thus, to define "design rules" for mucus penetrating (nano)particles (MPP), at least in terms of the surface characteristics of charge and hydrophilicity. Dynamic light scattering (DLS) and rheology have been used to assess the interaction between such nanoparticles and mucin. It was found that negatively charged and hydrophilic nanoparticles do not exhibit an interaction with mucin whereas positively charged and hydrophobic nanoparticles show a strong interaction. Surface grafted poly (ethylene glycol) (PEG) chains significantly reduced this interaction. This study clearly demonstrates that the established colloid science techniques of DLS and rheology are very powerful screening tools to probe nanoparticle/mucin interactions.

Probing competitive interactions in quaternary formulations.

HYPOTHESIS: The interaction of amphiphilic block copolymers of the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) group with small molecule surfactants may be "tuned" by the presence of selected alcohols, with strong interactions leading to substantial changes in (mixed) micelle morphology, whilst weaker interactions lead to coexisting micelle types. EXPERIMENTS: The nature and the strength of the interactions between Pluronic P123 (EO20PO70EO20) and small molecule surfactants (anionic sodium dodecylsulfate, SDS, C12SO4Na), (cationic dodecyltrimethylammonium bromide, C12TAB) and (non-ionic polyoxyethylene(23)lauryl ether, Brij 35, C12EO23OH) is expected to depend on the partitioning of the short, medium and long chain alcohols (ethanol, hexanol and decanol respectively) and was probed using tensiometry, pulsed-gradient spin-echo nuclear magnetic resonance (PGSE-NMR) and small-angle neutron scattering (SANS). FINDINGS: The SANS data for aqueous P123 solutions with added alcohols were well described by a charged spherical core/shell model for the micelle morphology. The addition of the surfactants led to significantly smaller, oblate elliptical mixed micelles in the absence of alcohols. Addition of ethanol to these systems led to a decrease in the micelle size, whereas larger micelles were observed upon addition of the longer chain alcohols. NMR studies provided complementary estimates of the micelle composition, and the partitioning of the various components into the micelle.

Interpolymer complexation: comparisons of bulk and interfacial structures.

The interactions between the strong polyelectrolyte sodium poly(styrenesulfonate), NaPSS, and the neutral polymer poly(vinylpyrrolidone), PVP, were investigated in bulk and at the silica/solution interface using a combination of diffusion nuclear magnetic resonance spectroscopy (NMR), small-angle neutron scattering (SANS), solvent relaxation NMR, and ellipsometry. We show for the first time that complex formation occurs between NaPSS and PVP in solution; the complexes formed were shown not to be influenced by pH variation, whereas increasing the ionic strength increases the complexation of NaPSS but does not influence the PVP directly. The complexes formed contained a large proportion of NaPSS. Study of these interactions at the silica interface demonstrated that complexes also form at the nanoparticle interface where PVP is added in the system prior to NaPSS. For a constant PVP concentration and varying NaPSS concentration, the system remains stable until NaPSS is added in excess, which leads to depletion flocculation. Surface complex formation using the layer-by-layer technique was also reported at a planar silica interface.

Nanoparticle diffusion within intestinal mucus: Three-dimensional response analysis dissecting the impact of particle surface charge, size and heterogeneity across polyelectrolyte, pegylated and viral particles.

Multiple particle tracking (MPT) methodology was used to dissect the impact of nanoparticle surface charge and size upon particle diffusion through freshly harvested porcine jejunum mucus. The mucus was characterised rheologically and by atomic force microscopy. To vary nanoparticle surface charge we used a series of self-assembly polyelectrolyte particles composed of varying ratios of the negatively charged polyacrylic acid polymer and the positively charged chitosan polymer. This series included a neutral or near-neutral particle to correspond to highly charged but near-neutral viral particles that appear to effectively permeate mucus. In order to negate the confounding issue of self-aggregation of such neutral synthetic particles a sonication step effectively reduced particle size (to less than 340 nm) for a sufficient period to conduct the tracking experiments. Across the polyelectrolyte particles a broad and meaningful relationship was observed between particle diffusion in mucus (×1000 difference between slowest and fastest particle types), particle size (104-373 nm) and particle surface charge (-29 mV to +19.5 mV), where the beneficial characteristic promoting diffusion was a neutral or near-neutral charge. The diffusion of the neutral polyelectrolyte particle (0.02887 cm S(-1)×10(-9)) compared favourably with that of a highly diffusive PEGylated-PLGA particle (0.03182 cm(2) S(-1)×10(-9)), despite the size of the latter (54 nm diameter) accommodating a reduced steric hindrance with the mucin network. Heterogeneity of particle diffusion within a given particle type revealed the most diffusive 10% sub-population for the neutral polyelectrolyte formulation (5.809 cm(2) S(-1)×10(-9)) to be faster than that of the most diffusive 10% sub-populations obtained either for the PEGylated-PLGA particle (4.061 cm(2) S(-1)×10(-9)) or for a capsid adenovirus particle (1.922 cm(2) S(-1)×10(-9)). While this study has used a simple self-assembly polyelectrolyte system it has substantiated the pursuance of other polymer synthesis approaches (such as living free-radical polymerisation) to deliver stable, size-controlled nanoparticles possessing a uniform high density charge distribution and yielding a net neutral surface potential. Such particles will provide an additional strategy to that of PEGylated systems where the interactions of mucosally delivered nanoparticles with the mucus barrier are to be minimised.

Methods to determine the interactions of micro- and nanoparticles with mucus.

The present review provides an overview of methods and techniques for studying interactions of micro- and nanoparticulate drug delivery system with mucus. Nanocarriers trapped by mucus are featuring a change in particle size and zeta potential that can be utilized to predict their mucus permeation behavior. Furthermore, interactions between nanoparticulate drug delivery systems and mucus layer modify the viscoelasticity of mucus which can be detected via rheological studies and quartz crystal microbalance with dissipation monitoring (QCM-D) analysis. Having a closer look at molecular interactions between drug carrier and mucus small-angle neutron scattering (SANS) is an appropriate analysis technique. Moreover, different methods to determine particle diffusion in mucus such as the newly established Transwell diffusion system, rotating silicone tube technique, multiple-particle tracking (MPT) and diffusion NMR are summarized within this review. The explanations and discussed pros and cons of collated methods and techniques should provide a good starting point for all those looking forward to move in this interesting field.

Nanoparticles decorated with proteolytic enzymes, a promising strategy to overcome the mucus barrier.

The intestinal mucus gel layer represents a stumbling block for drug adsorption. This study is aimed to formulate a nanoparticulate system able to overcome this barrier by cleaving locally the glycoprotein substructures of the mucus. Mucolytic enzymes such as papain (PAP) and bromelain (BRO) were covalently conjugated to poly(acrylic acid) (PAA). Nanoparticles (NPs) were then formulated via ionic gelation method and characterized by particle size, zeta potential, enzyme content and enzymatic activity. The NPs permeation quantified by rotating tube studies was correlated with changes in the mucus gel layer structure determined by pulsed-gradient-spin-echo NMR (PGSE-NMR), small-angle neutron scattering (SANS) and spin-echo SANS (SESANS). PAP and BRO functionalized NPs had an average size in the range of 250 and 285 nm and a zeta potential that ranged between -6 and -5 mV. The enzyme content was 242 µg enzyme/mg for PAP modified NPs and 253 µg enzyme/mg for BRO modified NPs. The maintained enzymatic activity was 43% for PAP decorated NPs and 76% for BRO decorated NPs. The rotating tube technique revealed a better performance of BRO decorated NPs compared to PAA decorated NPs, with a 4.8-fold higher concentration of NPs in the inner slice of mucus. Addition of 0.5 wt% of enzyme functionalized NPs to 5 wt% intestinal mucin led to c.a. 2-fold increase in the mobility of the mucin as measured by PGSE-NMR indicative of a significant break-up of the structure of the mucin. SANS and SESANS measurements further revealed a change in structure of the intestinal mucus induced by the incorporation of the functionalized NPs mostly occurring at a length scale longer than 0.5 µm. Accordingly, BRO decorated NPs show higher potential than PAP functionalized NPs as mucus permeating drug delivery systems.

The effect of solvent choice on the gelation and final hydrogel properties of Fmoc-diphenylalanine.

Gels can be formed by dissolving Fmoc-diphenylalanine (Fmoc-PhePhe or FmocFF) in an organic solvent and adding water. We show here that the choice and amount of organic solvent allows the rheological properties of the gel to be tuned. The differences in properties arise from the microstructure of the fibre network formed. The organic solvent can then be removed post-gelation, without significant changes in the rheological properties. Gels formed using acetone are meta-stable and crystals of FmocFF suitable for X-ray diffraction can be collected from this gel.

The effect of self-sorting and co-assembly on the mechanical properties of low molecular weight hydrogels.

Self-sorting in low molecular weight hydrogels can be achieved using a pH triggered approach. We show here that this method can be used to prepare gels with different types of mechanical properties. Cooperative, disruptive or orthogonal assembled systems can be produced. Gels with interesting behaviour can be also prepared, for example self-sorted gels where delayed switch-on of gelation occurs. By careful choice of gelator, co-assembled structures can also be generated, which leads to synergistic strengthening of the mechanical properties.

Adsorption and surfactant-mediated desorption of poly(vinylpyrrolidone) on plasma- and piranha-cleaned silica surfaces.

Optical flow cell reflectometry was used to study the adsorption of poly(vinylpyrrolidone) (PVP) to a silica surface and the subsequent surfactant adsorption and polymer desorption upon exposure to the anionic surfactant sodium dodecyl sulfate (SDS). We have studied these effects as a function of pH and surfactant concentration, but also for two different methods of silica preparation, O2 plasma and piranha cleaning. As a function of pH, a plateau in the amount adsorbed of ∼0.6 mg/m(2) is observed below a critical pH, above which the adsorption decreases to zero within 2-3 pH units. An increase in pH leads to dissociation of surface OH groups and a decreased potential for hydrogen bonding between the polymer and surface. For the plasma- and piranha-cleaned silica, the critical pH differs by 1-2 pH units, a reflection of the much larger amount of surface OH groups on piranha-cleaned silica (for a given pH). Subsequent rinsing of the adsorbed layer of PVP with an SDS solution leads to total or partial desorption of the PVP layer. Any remaining adsorbed PVP then acts as an adsorption site for SDS. A large difference between plasma- and piranha-cleaned silica is observed, with the PVP layer adsorbed to plasma-cleaned silica being much more susceptible to desorption by SDS. For a plasma-cleaned surface at pH 5.5, only 30% of the originally adsorbed PVP is remaining, while for piranha-cleaned silica, the pH can be increased to 10 before a similar reduction in the amount of adsorbed PVP is seen. For a given pH, piranha-cleaned silica has a higher surface charge, leading to a smaller amount of adsorbed SDS per PVP chain on a piranha-cleaned surface compared to a plasma-cleaned surface under identical conditions. In that way, the high negative surface charge makes desorption by negatively charged SDS more difficult. The high surface charge thus protects the neutral polymer from surfactant-mediated desorption.

Construction and physiochemical characterisation of a multi-composite, potential oral vaccine delivery system (VDS).

An increasing human population requires a secure food supply and a cost effective, oral vaccine delivery system for livestock would help facilitate this end. Recombinant antigen adsorbed onto silica beads and coated with myristic acid, was released (∼15% (w/v)) over 24 h at pH 8.8. At pH 2, the myristic acid acted as an enteric coating, protecting the antigen from a variety of proteases. The antigen adsorbed onto silica particles, coated in myristic acid had a conserved secondary structure (measured by circular dichroism (CD) spectroscopy) following its pH-triggered release. Small angle neutron scattering (SANS) was used to measure the thickness of the adsorbed antigen, finding that its adsorbed conformation was slightly greater than its solution radius of gyration, i.e. 120-160 Å. The addition of myristic acid led to a further increase in particle size, with scattering data consistent with an acid thickness slightly greater than a monolayer of fully extended alkyl chains and a degree of hydration of around 50%. Whilst adsorbed onto the silica and coated in myristic acid, the protein was stable over 14 days at 42 °C, indicating a reduced need for cold chain storage. These data indicate that further investigation is warranted into the development of this technology.