MiR-92a inhibits proliferation and promotes apoptosis of OSCC cells through Wnt/ß-catenin signaling pathway.

OBJECTIVE: The aim of this study was to investigate the role of micro ribonucleic acid (miR)-92a in the pathogenesis of oral squamous cell carcinoma (OSCC). MATERIALS AND METHODS: The relative expression level of miR-92a in OSCC cell lines and normal oral epithelial keratinocyte cell lines was detected via quantitative Reverse Transcription-Polymerase Chain Reaction (qRT-PCR). Subsequently, the effects of miR-92a silencing on proliferation and apoptosis of OSCC cells were determined via cell counting kit-8 (CCK-8) assay, flow cytometry, and colony formation assay, respectively. Whether miR-92a could bind to the 3'-untranslated region (3'-UTR) of target mRNA was detected using Dual-Luciferase reporter gene assay. Furthermore, changes in Wnt/ß-catenin pathway-associated proteins were explored via Western blotting. RESULTS: The expression of miR-92a in OSCC cell lines was significantly higher than that of normal oral epithelial keratinocyte cell lines (p<0.05). Silencing of miR-92a significantly inhibited proliferation and promoted apoptosis of OSCC cells (p<0.05). Luciferase reporter gene assay confirmed that miR-92a could bind to the 3'-UTR of Kruppel-like factor 4 (KLF4) gene. After miR-92a silencing, the expressions of Wnt/ß-catenin pathway-associated proteins were remarkably down-regulated, including ß-catenin, c-Myc, and Wnt3a (p<0.05). CONCLUSIONS: Silencing of miR-92a inactivates the Wnt/ß-catenin signaling pathway by targeting KLF4, thereby inhibiting proliferation and promoting apoptosis of OSCC cells. Our findings suggest that miR-92a may be a potential therapeutic target for OSCC patients.

Analysis of volatile species kinetics during typical medical waste materials pyrolysis using a distributed activation energy model.

The complex reactions of typical medical waste materials pyrolysis and the evolution of different volatile species can be well represented by a Distributed Activation Energy Model (DAEM). In this study, A thermogravimetric analyser (TGA), coupled with Fourier transform infrared analysis of evolving products (TG-FTIR), were used to perform kinetic analysis of typical medical waste materials pyrolysis. A simple direct search method was used for the determination of DAEM kinetic parameters and the yield of individual pyrolysis products under any given heating condition. The agreement between the model prediction and the experimental data was generally good. The results can be used as inputs to a pyrolysis model based on first-order kinetic expression with a Gaussian Distribution of Activation Energies as a sub-model to CFD code.

Degradation of gas-liquid gliding arc discharge on Acid Orange II.

The effects of pH value, initial concentration of dye solution and temperature on the degradation efficiency of Acid Orange II (AO7) using gas-liquid gliding arc discharge were investigated. The influences of pH value and temperature on degradation efficiency were not apparent. Increasing initial solution concentration caused the decrease of degradation rate and the increase of absolute degradation quantity. Considering energy efficiency and absolute degradation quantity, the gas-liquid gliding arc discharge is fit for treating high concentration organic wastewater. A possible mineralization pathway was proposed through the analysis of intermediate products detected by gas chromatograph coupled with mass spectrophotometer (GC-MS) and ion chromatograph (IC). Hydroxyl radicals reacted with the azo linkage-bearing carbon of a hydroxy-substituted ring, leading to the cleavage of -C-N- and degradation of AO7. The solution biodegradability was significantly improved (BOD(5)/COD from 0.02 to 0.43). The toxicity of intermediate products was lower than that of the initial Acid Orange II.

PCDD/F concentrations of agricultural soil in the vicinity of fluidized bed incinerators of co-firing MSW with coal in Hangzhou, China.

The concentrations of 17PCDD/F congeners as well as tetra- to octa-homologues were determined in 33 soil samples collected within a radius of 7 km from a municipal solid waste (MSW) incineration plant that is equipped with three fluidized bed incinerators (FBIs) of co-firing MSW with coal in Hangzhou, China. The total PCDD/F concentrations ranged from 0.39 to 5.04 pg I-TEQ g(-1) (54-285 pg g(-1)), with an average and a median value of 1.22 and 0.84 pg I-TEQ g(-1) (105 and 86 pg g(-1)), respectively. A systematic decrease of PCDD/F levels was observed with the increasing distances and with the decreasing downwind frequencies from the plant. The comparisons of homologue and congener patterns and multivariate analysis of soil and flue gas samples strongly indicated that most of the soil samples were influenced by the FBIs. Apart from the incineration plant, historical PCDD/F emissions of hazardous waste incinerator (HWI) and motor vehicles as well as the application of 1,3,5-trichloro-2-(4-nitrophenoxy) benzene (CNP) seemed to play an important role in soil samples adjacent to these potential sources.

Characteristic of polychlorinated dibenzo-p-dioxins and dibenzofurans in fly ash from incinerators in china.

Fly ash from municipal solid waste (MSW), medical waste (MW) and electrical power plant (EPP) incinerators were analyzed for polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). The study showed that the PCDD/F levels in fly ash were EPP

Study on pyrolysis of typical medical waste materials by using TG-FTIR analysis.

Pyrolysis of certain medical waste materials was studied using thermogravimetric analyzer coupled with Fourier transform infrared spectroscopy (TG-FTIR). Pyrolysis characteristics of three common materials were discussed. The pyrolysis of absorbent cotton turned out to be the most concentrative, followed by medical respirator and bamboo stick. From TG and DTG curves, pyrolysis of these three materials occurred in single, two and three stages respectively. Evolved volatile products from all these three materials included 2-butanone, benzaldehyde, formic acid, acetic acid, hydrocarbon, carbon dioxide, carbon monoxide, and water; whereas no sulphur dioxide, ammonia and hydrogen cyanide was detected. There are several differences in yield among them. However, the study in this paper is essential for medical waste pyrolysis model, the TG-FTIR approach is potential to provide valuable inputs for predictive modeling of medical waste pyrolysis. More studied are needed to get the kinetic parameters and pyrolysis models that can predict yields and evolution patterns of selected volatile products for CFD applications.

Effects of calcium-based sorbents on PCDD/F formation from pentachlorophenol combustion process.

Calcium-based sorbents are widely employed to reduce the acidic gases emission from combustion processes, and also have effects on trace organic pollutants formation and emission. Batch experiments were conducted to investigate the effects of calcium-based sorbents on pentachlorophenol (PCP) forming PCDDs/Fs during high temperature combustion processes. The results indicated that highly chlorinated PCDD/F homologues were the predominant dioxin products from PCP thermo decomposition, and only minor increasing of PCDDs happened when Ca/Cl ratio was lower than 1, while a major jump occurred when Ca/Cl ratio increased from 1 to 2. The CaO addition clearly promoted the production of all chlorinated dibenzo-p-dioxins homologue and 4-7DFs homologue. Comparison of total PCDD/F emission and its I-TEQ for three different calcium-based sorbents addition (CaO, CaCO3, basic fly ash) indicated that CaO and fly ash containing CaO had almost the same promotion effects on PCDDs/Fs originated from PCP, while CaCO3 inhibit PCDD/F formation greatly with inhibition efficiency up to 70%. Such effects may be partly proved by the observed clearly different micro-surface structures of their reaction residues. The mechanism of CaO on condensation and dechlorination reactions for PCP forming PCDDs and acid-base interaction were proposed to speculate the promotion effects of CaO, and the reaction precedence was used to speculate the inhibition effects of CaCO3 on PCDDs/Fs originated from PCP. The results of the present paper might be useful for the industrial application of calcium-based sorbents to control PCDD/F emission.

Degradation of PCDD/Fs by mechanochemical treatment of fly ash from medical waste incineration.

The potential of mechanochemical treatment (MC) to degrade PCDD/Fs contained in fly ash was tested via grounding with and without calcium oxide (CaO) under atmospheric pressure. Three types of fly ash collected from medical waste incineration were compared, originating either from rotary kiln fluidized bed multi-stage incinerator using activated carbon spray (FA1, FA2), or a simple stoker incinerator without activated carbon spray (FA3). In test I: CaO to FA1 mixed at ratio of 6-60% was milled at rotational speed of 350 rpm; in test II: FA2 and FA3 without CaO were milled at rotational speed of 400 rpm. The duration of the tests was 2h. The results from the present study indicate that (1) under two test conditions of with and without CaO, PCDD/Fs contained in real fly ash both can be degraded by mechanochemical treatment, (2) under condition of blending with CaO, the degradation efficiency of PCDD/Fs increased with increasing ratio of CaO, (3) the degradation efficiency of PCDD/Fs may increase with rotational speed increasing and (4) the destruction and dechlorination are major mechanism for PCDD/Fs degradation. These results show that mechanochemical treatment is a high potential technology for PCDD/Fs degradation in fly ash.

Evaluation of PCDD/Fs emission from fluidized bed incinerators co-firing MSW with coal in China.

The levels and homologue profile of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from stack gas of three typical fluidized bed incinerators co-firing municipal solid waste (MSW) with Chinese coal were measured. The PCDD/Fs emission was in the range of 0.0054-0.1961 ng I-TEQ/N m(3). Comparison of PCDD/Fs detection results by HRGC/HRMS and HRGC/LRMS suggested that it was feasible to detect fly ash with high PCDD/Fs concentration by HRGC/LRMS. Several factors on PCDD/Fs emission were discussed. The primary reason for the lower PCDD/Fs emission was the inhibition mechanism of relatively high sulfur in feeding coal on PCDD/Fs formation. The emission results also showed that there was no directly correlation between PCDD/Fs levels and CO, O(2) and HCl concentration in flue gas. It was estimated that about 0.1034 g I-TEQ was annually emitted to atmosphere from the tested three MSW incinerators (total daily treatment capacity is 800 tonnes MSW).

[Experimental and mechanism analyses on HCl emission control during PVC combustion in fixed beds].

Incineration of chloridated plastic (PVC) in solid wastes contributes much to HCl pollutant in air environment. The characteristics of HCl emissions and reduction during PVC combustion were conducted in a nearly isothermal, externally heated, horizontal quartz-tube reactor. With increasing temperature from 700 to 900 degrees C, the conversion of HCl increased leniently from 82.5% to 88.3%. High excess air factor enhanced a small amount of HCl existing in form of Cl2. The calcium-based sorbents including CaCO3, Ca(OH)2, Ca(CH3COO)2 exhibited high HCl capture efficiencies from 68% to 79%, while magnesium-based sorbent less than that of 3%. Influences of operational variables, i.e., size of sorbent, Ca/Cl molar ratio and combustion fume compositions, on the HCl reduction were discussed. From a point of view of equilibrium constant of dechloridization reaction the experimental results were explained in detail.