Diagnostic Applications of Intraoral Scanners: A Systematic Review.

In addition to their recognized value for obtaining 3D digital dental models, intraoral scanners (IOSs) have recently been proven to be promising tools for oral health diagnostics. In this work, the most recent literature on IOSs was reviewed with a focus on their applications as detection systems of oral cavity pathologies. Those applications of IOSs falling in the general area of detection systems for oral health diagnostics (e.g., caries, dental wear, periodontal diseases, oral cancer) were included, while excluding those works mainly focused on 3D dental model reconstruction for implantology, orthodontics, or prosthodontics. Three major scientific databases, namely Scopus, PubMed, and Web of Science, were searched and explored by three independent reviewers. The synthesis and analysis of the studies was carried out by considering the type and technical features of the IOS, the study objectives, and the specific diagnostic applications. From the synthesis of the twenty-five included studies, the main diagnostic fields where IOS technology applies were highlighted, ranging from the detection of tooth wear and caries to the diagnosis of plaques, periodontal defects, and other complications. This shows how additional diagnostic information can be obtained by combining the IOS technology with other radiographic techniques. Despite some promising results, the clinical evidence regarding the use of IOSs as oral health probes is still limited, and further efforts are needed to validate the diagnostic potential of IOSs over conventional tools.

Combined mechanistic modeling and machine-learning approaches in systems biology - A systematic literature review.

BACKGROUND AND OBJECTIVE: Mechanistic-based Model simulations (MM) are an effective approach commonly employed, for research and learning purposes, to better investigate and understand the inherent behavior of biological systems. Recent advancements in modern technologies and the large availability of omics data allowed the application of Machine Learning (ML) techniques to different research fields, including systems biology. However, the availability of information regarding the analyzed biological context, sufficient experimental data, as well as the degree of computational complexity, represent some of the issues that both MMs and ML techniques could present individually. For this reason, recently, several studies suggest overcoming or significantly reducing these drawbacks by combining the above-mentioned two methods. In the wake of the growing interest in this hybrid analysis approach, with the present review, we want to systematically investigate the studies available in the scientific literature in which both MMs and ML have been combined to explain biological processes at genomics, proteomics, and metabolomics levels, or the behavior of entire cellular populations. METHODS: Elsevier Scopus®, Clarivate Web of Science™ and National Library of Medicine PubMed® databases were enquired using the queries reported in Table 1, resulting in 350 scientific articles. RESULTS: Only 14 of the 350 documents returned by the comprehensive search conducted on the three major online databases met our search criteria, i.e. present a hybrid approach consisting of the synergistic combination of MMs and ML to treat a particular aspect of systems biology. CONCLUSIONS: Despite the recent interest in this methodology, from a careful analysis of the selected papers, it emerged how examples of integration between MMs and ML are already present in systems biology, highlighting the great potential of this hybrid approach to both at micro and macro biological scales.

Using Features Extracted from Upper Limb Reaching Tasks to Detect Parkinson's Disease by means of Machine Learning Models.

While in the literature there is much interest in investigating lower limbs gait of patients affected by neurological diseases, such as Parkinson's Disease (PD), fewer publications involving upper limbs movements are available. In previous studies, 24 motion signals (the so-called reaching tasks) of the upper limbs of PD patients and Healthy Controls (HCs) were used to extract several kinematic features through a custom-made software; conversely, the aim of our paper is to investigate the possibility to build models - using these features - for distinguishing PD patients from HCs. First, a binary logistic regression and, then, a Machine Learning (ML) analysis was performed by implementing five algorithms through the Knime Analytics Platform. The ML analysis was performed twice: first, a leave-one out-cross validation was applied; then, a wrapper feature selection method was implemented to identify the best subset of features that could maximize the accuracy. The binary logistic regression achieved an accuracy of 90.5%, demonstrating the importance of the maximum jerk during subjects upper limb motion; the Hosmer-Lemeshow test supported the validity of this model (p-value=0.408). The first ML analysis achieved high evaluation metrics by overcoming 95% of accuracy; the second ML analysis achieved a perfect classification with 100% of both accuracy and area under the curve receiver operating characteristics. The top-five features in terms of importance were the maximum acceleration, smoothness, duration, maximum jerk and kurtosis. The investigation carried out in our work has proved the predictive power of the features, extracted from the reaching tasks involving the upper limbs, to distinguish HCs and PD patients.

Gait asymmetry in stroke patients with unilateral spatial neglect.

The recovery of independent gait represents one of the main functional goals of the rehabilitative interventions after stroke but it can be hindered by the presence of unilateral spatial neglect (USN). The aim of the paper is to study if the presence of USN in stroke patients affects lower limb gait parameters between the two body sides, differently from what could be expected by the motor impairment alone, and to explore whether USN is associated to specific gait asymmetry. Thirty-five stroke patients (right or left lesion and ischemic or hemorrhagic etiology) who regained independent gait were assessed for global cognitive functioning and USN. All patients underwent a gait analysis session by using a wearable inertial system, kinematic parameters were computed. Enrolled patients presented altered motion parameters. Stroke patients with USN showed specific asymmetries in the following parameters: stance phase, swing phase, and knee range of motion. No differences in the clinical scores were found as the presence of USN. The presence of USN was associated with a specific form of altered gait symmetry. These findings may help clinicians to develop more tailored rehabilitative training to enhance gait efficacy of patients with motor defects complicated by the presence of selected cognitive impairments. Overview of the experiment setup. The workflow shows: diagnosis of unilateral spatial neglect by the neuropsychologist, sensors placement, gait analysis protocol and evaluation of the gait asymmetry together with the statistically significant features.

Machine learning can predict mild cognitive impairment in Parkinson's disease.

Background: Clinical markers of cognitive decline in Parkinson's disease (PD) encompass several mental non-motor symptoms such as hallucinations, apathy, anxiety, and depression. Furthermore, freezing of gait (FOG) and specific gait alterations have been associated with cognitive dysfunction in PD. Finally, although low cerebrospinal fluid levels of amyloid-ß42 have been found to predict cognitive decline in PD, hitherto PET imaging of amyloid-ß (Aß) failed to consistently demonstrate the association between Aß plaques deposition and mild cognitive impairment in PD (PD-MCI). Aim: Finding significant features associated with PD-MCI through a machine learning approach. Patients and methods: Patients were assessed with an extensive clinical and neuropsychological examination. Clinical evaluation included the assessment of mental non-motor symptoms and FOG using the specific items of the MDS-UPDRS I and II. Based on the neuropsychological examination, patients were classified as subjects without and with MCI (noPD-MCI, PD-MCI). All patients were evaluated using a motion analysis system. A subgroup of PD patients also underwent amyloid PET imaging. PD-MCI and noPD-MCI subjects were compared with a univariate statistical analysis on demographic data, clinical features, gait analysis variables, and amyloid PET data. Then, machine learning analysis was performed two times: Model 1 was implemented with age, clinical variables (hallucinations/psychosis, depression, anxiety, apathy, sleep problems, FOG), and gait features, while Model 2, including only the subgroup performing PET, was implemented with PET variables combined with the top five features of the former model. Results: Seventy-five PD patients were enrolled (33 PD-MCI and 42 noPD-MCI). PD-MCI vs. noPD-MCI resulted in older and showed worse gait patterns, mainly characterized by increased dynamic instability and reduced step length; when comparing amyloid PET data, the two groups did not differ. Regarding the machine learning analyses, evaluation metrics were satisfactory for Model 1 overcoming 80% for accuracy and specificity, whereas they were disappointing for Model 2. Conclusions: This study demonstrates that machine learning implemented with specific clinical features and gait variables exhibits high accuracy in predicting PD-MCI, whereas amyloid PET imaging is not able to increase prediction. Additionally, our results prompt that a data mining approach on certain gait parameters might represent a reliable surrogate biomarker of PD-MCI.

Wearable Sensors and Artificial Intelligence for Physical Ergonomics: A Systematic Review of Literature.

Physical ergonomics has established itself as a valid strategy for monitoring potential disorders related, for example, to working activities. Recently, in the field of physical ergonomics, several studies have also shown potential for improvement in experimental methods of ergonomic analysis, through the combined use of artificial intelligence, and wearable sensors. In this regard, this review intends to provide a first account of the investigations carried out using these combined methods, considering the period up to 2021. The method that combines the information obtained on the worker through physical sensors (IMU, accelerometer, gyroscope, etc.) or biopotential sensors (EMG, EEG, EKG/ECG), with the analysis through artificial intelligence systems (machine learning or deep learning), offers interesting perspectives from both diagnostic, prognostic, and preventive points of view. In particular, the signals, obtained from wearable sensors for the recognition and categorization of the postural and biomechanical load of the worker, can be processed to formulate interesting algorithms for applications in the preventive field (especially with respect to musculoskeletal disorders), and with high statistical power. For Ergonomics, but also for Occupational Medicine, these applications improve the knowledge of the limits of the human organism, helping in the definition of sustainability thresholds, and in the ergonomic design of environments, tools, and work organization. The growth prospects for this research area are the refinement of the procedures for the detection and processing of signals; the expansion of the study to assisted working methods (assistive robots, exoskeletons), and to categories of workers suffering from pathologies or disabilities; as well as the development of risk assessment systems that exceed those currently used in ergonomics in precision and agility.

A Logistic Regression Model for Biomechanical Risk Classification in Lifting Tasks.

Lifting is one of the most potentially harmful activities for work-related musculoskeletal disorders (WMSDs), due to exposure to biomechanical risk. Risk assessment for work activities that involve lifting loads can be performed through the NIOSH (National Institute of Occupational Safety and Health) method, and specifically the Revised NIOSH Lifting Equation (RNLE). Aim of this work is to explore the feasibility of a logistic regression model fed with time and frequency domains features extracted from signals acquired through one inertial measurement unit (IMU) to classify risk classes associated with lifting activities according to the RNLE. Furthermore, an attempt was made to evaluate which are the most discriminating features relating to the risk classes, and to understand which inertial signals and which axis were the most representative. In a simplified scenario, where only two RNLE variables were altered during lifting tasks performed by 14 healthy adults, inertial signals (linear acceleration and angular velocity) acquired using one IMU placed on the subject's sternum during repeated rhythmic lifting tasks were automatically segmented to extract several features in the time and frequency domains. The logistic regression model fed with significant features showed good results to discriminate "risk" and "no risk" NIOSH classes with an accuracy, sensitivity and specificity equal to 82.8%, 84.8% and 80.9%, respectively. This preliminary work indicated that a logistic regression model-fed with specific inertial features extracted by signals acquired using a single IMU sensor placed on the sternum-is able to discriminate risk classes according to the RNLE in a simplified context, and therefore could be a valid tool to assess the biomechanical risk in an automatic way also in more complex conditions (e.g., real working scenarios).

Interplay between gait and neuropsychiatric symptoms in Parkinson's Disease.

Parkinson's Disease (PD) is a neurodegenerative disease which involves both motor and non-motor symptoms. Non-motor mental symptoms are very common among patients with PD since the earliest stage. In this context, gait analysis allows to detect quantitative gait variables to distinguish patients affected by non-motor mental symptoms from patients without these symptoms. A cohort of 68 PD subjects (divided in two groups) was acquired through gait analysis (single and double task) and spatial temporal parameters were analysed; first with a statistical analysis and then with a machine learning (ML) approach. Single-task variables showed that 9 out of 16 spatial temporal features were statistically significant for the univariate statistical analysis (p-value< 0.05). Indeed, a statistically significant difference was found in stance phase (p-value=0.032), swing phase (p-value=0.042) and cycle length (p-value=0.03) of the dual task. The ML results confirmed the statistical analysis, in particular, the Decision Tree classifier showed the highest accuracy (80.9%) and also the highest scores in terms of specificity and precision. Our findings indicate that patients with non-motor mental symptoms display a worse gait pattern, mainly dominated by increased slowness and dynamic instability.

The role of bone mineral density and cartilage volume to predict knee cartilage degeneration.

Knee Osteoarthritis (OA) is a highly prevalent condition affecting knee joint that causes loss of physical function and pain. Clinical treatments are mainly focused on pain relief and limitation of disabilities; therefore, it is crucial to find new paradigms assessing cartilage conditions for detecting and monitoring the progression of OA. The goal of this paper is to highlight the predictive power of several features, such as cartilage density, volume and surface. These features were extracted from the 3D reconstruction of knee joint of forty-seven different patients, subdivided into two categories: degenerative and non-degenerative. The most influent parameters for the degeneration of the knee cartilage were determined using two machine learning classification algorithms (logistic regression and support vector machine); later, box plots, which depicted differences between the classes by gender, were presented to analyze several of the key features' trend. This work is part of a strategy that aims to find a new solution to assess cartilage condition based on new-investigated features.

Statistical Analysis and Kinematic Assessment of Upper Limb Reaching Task in Parkinson's Disease.

The impact of neurodegenerative disorders is twofold; they affect both quality of life and healthcare expenditure. In the case of Parkinson's disease, several strategies have been attempted to support the pharmacological treatment with rehabilitation protocols aimed at restoring motor function. In this scenario, the study of upper limb control mechanisms is particularly relevant due to the complexity of the joints involved in the movement of the arm. For these reasons, it is difficult to define proper indicators of the rehabilitation outcome. In this work, we propose a methodology to analyze and extract an ensemble of kinematic parameters from signals acquired during a complex upper limb reaching task. The methodology is tested in both healthy subjects and Parkinson's disease patients (N = 12), and a statistical analysis is carried out to establish the value of the extracted kinematic features in distinguishing between the two groups under study. The parameters with the greatest number of significances across the submovements are duration, mean velocity, maximum velocity, maximum acceleration, and smoothness. Results allowed the identification of a subset of significant kinematic parameters that could serve as a proof-of-concept for a future definition of potential indicators of the rehabilitation outcome in Parkinson's disease.

Comparing Two Approaches for Thyroidectomy: A Health Technology Assessment through DMAIC Cycle.

Total thyroidectomy is very common in endocrine surgery and the haemostasis can be obtained in different ways across surgery; recently, some devices have been developed to support this surgical phase. In this paper, a health technology assessment is conducted through the define, measure, analyse, improve, and control cycle of the Six Sigma methodology to compare traditional total thyroidectomy with the surgical operation performed through a new device in an overall population of 104 patients. Length of hospital stay, drain output, and time for surgery were considered the critical to qualities in order to compare the surgical approaches which can be considered equal regarding the organizational, ethical, and security impact. Statistical tests (Kolmogorov-Smirnov, t test, ANOVA, Mann-Whitney, and Kruskal-Wallis tests) and visual management diagrams were employed to compare the approaches, but no statistically significant difference was found between them. Considering these results, this study shows that the introduction of the device to perform total thyroidectomy does not guarantee appreciable clinical advantages. A cost analysis to quantify the economic impact of the device into the practice could be a future development. Healthy policy leaders and clinicians who are requested to make decisions regarding the supply of biomedical technologies could benefit from this research.

Reducing the Healthcare-Associated Infections in a Rehabilitation Hospital under the Guidance of Lean Six Sigma and DMAIC.

The reduction of healthcare-associated infections (HAIs) is one of the most important issues in the healthcare context for every type of hospital. In three operational units of the Scientific Clinical Institutes Maugeri SpA SB, a rehabilitation hospital in Cassano delle Murge (Italy), some corrective measures were introduced in 2017 to reduce the occurrence of HAIs. Lean Six Sigma was used together with the Define, Measure, Analyze, Improve, Control (DMAIC) roadmap to analyze both the impact of such measures on HAIs and the length of hospital stay (LOS) in the Rehabilitative Cardiology, Rehabilitative Neurology, Functional Recovery and Rehabilitation units in the Medical Center for Intensive Rehabilitation. The data of 2415 patients were analyzed, considering the phases both before and after the introduction of the measures. The hospital experienced a LOS reduction in both patients with and without HAIs; in particular, Cardiology had the greatest reduction for patients with infections (-7 days). The overall decrease in HAIs in the hospital was 3.44%, going from 169 to 121 cases of infections. The noteworthy decrease in LOS implies an increase in admissions and in the turnover indicator of the hospital, which has a positive impact on the hospital management as well as on costs.

The E-Textile for Biomedical Applications: A Systematic Review of Literature.

The use of e-textile technologies spread out in the scientific research with several applications in both medical and nonmedical world. In particular, wearable technologies and miniature electronics devices were implemented and tested for medical research purposes. In this paper, a systematic review regarding the use of e-textile for clinical applications was conducted: the Scopus and Pubmed databases were investigate by considering research studies from 2010 to 2020. Overall, 262 papers were found, and 71 of them were included in the systematic review. Of the included studies, 63.4% focused on information and communication technology studies, while the other 36.6% focused on industrial bioengineering applications. Overall, 56.3% of the research was published as an article, while the remainder were conference papers. Papers included in the review were grouped by main aim into cardiological, muscular, physical medicine and orthopaedic, respiratory, and miscellaneous applications. The systematic review showed that there are several types of applications regarding e-textile in medicine and several devices were implemented as well; nevertheless, there is still a lack of validation studies on larger cohorts of subjects since the majority of the research only focuses on developing and testing the new device without considering a further extended validation.

Machine Learning Evaluation of Biliary Atresia Patients to Predict Long-Term Outcome after the Kasai Procedure.

Kasai portoenterostomy (KP) represents the first-line treatment for biliary atresia (BA). The purpose was to compare the accuracy of quantitative parameters extracted from laboratory tests, US imaging, and MR imaging studies using machine learning (ML) algorithms to predict the long-term medical outcome in native liver survivor BA patients after KP. Twenty-four patients were evaluated according to clinical and laboratory data at initial evaluation (median follow-up = 9.7 years) after KP as having ideal (n = 15) or non-ideal (n = 9) medical outcomes. Patients were re-evaluated after an additional 4 years and classified in group 1 (n = 12) as stable and group 2 (n = 12) as non-stable in the disease course. Laboratory and quantitative imaging parameters were merged to test ML algorithms. Total and direct bilirubin (TB and DB), as laboratory parameters, and US stiffness, as an imaging parameter, were the only statistically significant parameters between the groups. The best algorithm in terms of accuracy, sensitivity, specificity, and AUCROC was naive Bayes algorithm, selecting only laboratory parameters (TB and DB). This preliminary ML analysis confirms the fundamental role of TB and DB values in predicting the long-term medical outcome for BA patients after KP, even though their values may be within the normal range. Physicians should be alert when TB and DB values change slightly.

Comparing the Prognostic Value of Stress Myocardial Perfusion Imaging by Conventional and Cadmium-Zinc Telluride Single-Photon Emission Computed Tomography through a Machine Learning Approach.

We compared the prognostic value of myocardial perfusion imaging (MPI) by conventional- (C-) single-photon emission computed tomography (SPECT) and cadmium-zinc-telluride- (CZT-) SPECT in a cohort of patients with suspected or known coronary artery disease (CAD) using machine learning (ML) algorithms. A total of 453 consecutive patients underwent stress MPI by both C-SPECT and CZT-SPECT. The outcome was a composite end point of all-cause death, cardiac death, nonfatal myocardial infarction, or coronary revascularization procedures whichever occurred first. ML analysis performed through the implementation of random forest (RF) and k-nearest neighbors (KNN) algorithms proved that CZT-SPECT has greater accuracy than C-SPECT in detecting CAD. For both algorithms, the sensitivity of CZT-SPECT (96% for RF and 60% for KNN) was greater than that of C-SPECT (88% for RF and 53% for KNN). A preliminary univariate analysis was performed through Mann-Whitney tests separately on the features of each camera in order to understand which ones could distinguish patients who will experience an adverse event from those who will not. Then, a machine learning analysis was performed by using Matlab (v. 2019b). Tree, KNN, support vector machine (SVM), Naïve Bayes, and RF were implemented twice: first, the analysis was performed on the as-is dataset; then, since the dataset was imbalanced (patients experiencing an adverse event were lower than the others), the analysis was performed again after balancing the classes through the Synthetic Minority Oversampling Technique. According to KNN and SVM with and without balancing the classes, the accuracy (p value = 0.02 and p value = 0.01) and recall (p value = 0.001 and p value = 0.03) of the CZT-SPECT were greater than those obtained by C-SPECT in a statistically significant way. ML approach showed that although the prognostic value of stress MPI by C-SPECT and CZT-SPECT is comparable, CZT-SPECT seems to have higher accuracy and recall.

Extracting Features from Poincaré Plots to Distinguish Congestive Heart Failure Patients According to NYHA Classes.

Heart-rate variability has proved a valid tool in prognosis definition of patients with congestive heart failure (CHF). Previous research has documented Poincaré plot analysis as a valuable approach to study heart-rate variability performance among different subjects. In this paper, we explored the possibility to feed machine-learning (ML) algorithms using unconventional quantitative parameters extracted from Poincaré plots (generated from 24-h electrocardiogram recordings) to classify patients with CHF belonging to different New York Heart Association (NYHA) classes. We performed in sequence the following investigations: first, a statistical analysis was carried out on 9 morphological parameters, automatically measured from Poincaré plots. Subsequently, a feature selection through a wrapper with a 10-fold cross-validation method was performed to find the best subset of features which maximized the classification accuracy for each considered ML algorithm. Finally, patient classification was assessed through a ML analysis using AdaBoost of Decision Tree, k-Nearest Neighbors and Naive Bayes algorithms. A univariate statistical analysis proved 5 out of 9 parameters presented statistically significant differences among patients of distinct NYHA classes; similarly, a multivariate logistic regression confirmed the importance of the parameter ρy in the separability between low-risk and high-risk classes. The ML analysis achieved promising results in terms of evaluation metrics (especially the Naive Bayes algorithm), with accuracies greater than 80% and Area Under the Receiver Operating Curve indices greater than 0.7 for the overall three algorithms. The study indicates the proposed features have a predictive power to discriminate the NYHA classes, to which the features seem evenly correlated. Despite the NYHA classification being subjective and easily recognized by cardiologists, the potential relevance in the clinical cardiology of the proposed features and the promising ML results implies the methodology could be a valuable approach to automatically classify CHF. Future investigations on enriched datasets may further confirm the presented evidence.

A Combined Radiomics and Machine Learning Approach to Distinguish Clinically Significant Prostate Lesions on a Publicly Available MRI Dataset.

Although prostate cancer is one of the most common causes of mortality and morbidity in advancing-age males, early diagnosis improves prognosis and modifies the therapy of choice. The aim of this study was the evaluation of a combined radiomics and machine learning approach on a publicly available dataset in order to distinguish a clinically significant from a clinically non-significant prostate lesion. A total of 299 prostate lesions were included in the analysis. A univariate statistical analysis was performed to prove the goodness of the 60 extracted radiomic features in distinguishing prostate lesions. Then, a 10-fold cross-validation was used to train and test some models and the evaluation metrics were calculated; finally, a hold-out was performed and a wrapper feature selection was applied. The employed algorithms were Naïve bayes, K nearest neighbour and some tree-based ones. The tree-based algorithms achieved the highest evaluation metrics, with accuracies over 80%, and area-under-the-curve receiver-operating characteristics below 0.80. Combined machine learning algorithms and radiomics based on clinical, routine, multiparametric, magnetic-resonance imaging were demonstrated to be a useful tool in prostate cancer stratification.

Positive impact of short-term gait rehabilitation in Parkinson patients: a combined approach based on statistics and machine learning.

Parkinson's disease is the second most common neurodegenerative disorder in the world. Assumed that gait dysfunctions represent a major motor symptom for the pathology, gait analysis can provide clinicians quantitative information about the rehabilitation outcome of patients. In this scenario, wearable inertial systems for gait analysis can be a valid tool to assess the functional recovery of patients in an automatic and quantitative way, helping clinicians in decision making. Aim of the study is to evaluate the impact of the short-term rehabilitation on gait and balance of patients with Parkinson's disease. A cohort of 12 patients with Idiopathic Parkinson's disease performed a gait analysis session instrumented by a wearable inertial system for gait analysis: Opal System, by APDM Inc., with spatial and temporal parameters being analyzed through a statistic and machine learning approach. Six out of fourteen motion parameters exhibited a statistically significant difference between the measurements at admission and at discharge of the patients, while the machine learning analysis confirmed the separability of the two phases in terms of Accuracy and Area under the Receiving Operating Characteristic Curve. The rehabilitation treatment especially improved the motion parameters related to the gait. The study shows the positive impact on the gait of a short-term rehabilitation in patients with Parkinson's disease and the feasibility of the wearable inertial devices, that are increasingly spreading in clinical practice, to quantitatively assess the gait improvement.

A Comprehensive Review of Techniques for Processing and Analyzing Fetal Heart Rate Signals.

The availability of standardized guidelines regarding the use of electronic fetal monitoring (EFM) in clinical practice has not effectively helped to solve the main drawbacks of fetal heart rate (FHR) surveillance methodology, which still presents inter- and intra-observer variability as well as uncertainty in the classification of unreassuring or risky FHR recordings. Given the clinical relevance of the interpretation of FHR traces as well as the role of FHR as a marker of fetal wellbeing autonomous nervous system development, many different approaches for computerized processing and analysis of FHR patterns have been proposed in the literature. The objective of this review is to describe the techniques, methodologies, and algorithms proposed in this field so far, reporting their main achievements and discussing the value they brought to the scientific and clinical community. The review explores the following two main approaches to the processing and analysis of FHR signals: traditional (or linear) methodologies, namely, time and frequency domain analysis, and less conventional (or nonlinear) techniques. In this scenario, the emerging role and the opportunities offered by Artificial Intelligence tools, representing the future direction of EFM, are also discussed with a specific focus on the use of Artificial Neural Networks, whose application to the analysis of accelerations in FHR signals is also examined in a case study conducted by the authors.

Work-Related Risk Assessment According to the Revised NIOSH Lifting Equation: A Preliminary Study Using a Wearable Inertial Sensor and Machine Learning.

Many activities may elicit a biomechanical overload. Among these, lifting loads can cause work-related musculoskeletal disorders. Aspiring to improve risk prevention, the National Institute for Occupational Safety and Health (NIOSH) established a methodology for assessing lifting actions by means of a quantitative method based on intensity, duration, frequency and other geometrical characteristics of lifting. In this paper, we explored the machine learning (ML) feasibility to classify biomechanical risk according to the revised NIOSH lifting equation. Acceleration and angular velocity signals were collected using a wearable sensor during lifting tasks performed by seven subjects and further segmented to extract time-domain features: root mean square, minimum, maximum and standard deviation. The features were fed to several ML algorithms. Interesting results were obtained in terms of evaluation metrics for a binary risk/no-risk classification; specifically, the tree-based algorithms reached accuracies greater than 90% and Area under the Receiver operating curve characteristics curves greater than 0.9. In conclusion, this study indicates the proposed combination of features and algorithms represents a valuable approach to automatically classify work activities in two NIOSH risk groups. These data confirm the potential of this methodology to assess the biomechanical risk to which subjects are exposed during their work activity.