Dissection flap fenestration can reduce re-apposition force of the false lumen in type-B aortic dissection: a computational and bench study.

Thoracic endovascular aortic repair (TEVAR) has been widely adopted as a standard for treating complicated acute and high-risk uncomplicated Stanford Type-B aortic dissections. The treatment redirects the blood flow towards the true lumen by covering the proximal dissection tear which promotes sealing of the false lumen. Despite advances in TEVAR, over 30% of Type-B dissection patients require additional interventions. This is primarily due to the presence of a persistent patent false lumen post-TEVAR that could potentially enlarge over time. We propose a novel technique, called slit fenestration pattern creation, which reduces the forces for re-apposition of the dissection flap (i.e., increase the compliance of the flap). We compute the optimal slit fenestration design using a virtual design of experiment (DOE) and demonstrate its effectiveness in reducing the re-apposition forces through computational simulations and benchtop experiments using porcine aortas. The findings suggest this potential therapy can drastically reduce the radial loading required to re-appose a dissected flap against the aortic wall to ensure reconstitution of the aortic wall (remodeling).

Novel patch biomaterial treatment for colon diverticulosis in swine model.

Current leading managements for diverticular disease cannot prevent the recurrence of diverticulitis, bleeding and/or other complications. There is an immediate need for developing new minimal invasive therapeutic strategies to prevent and treat this disease. Through a biomechanical analysis of porcine colon with diverticular lesions, we proposed a novel adhesive patch concept aiming at mechanical reconstruction of the diseased colon wall. This study aims to evaluate the surgical feasibility (safety and efficacy) of pulmonary visceral pleura (PVP) patch therapy using a pig model of diverticulosis. Six female Yucatan miniature pigs underwent collagenase injection (CI) for the development of diverticular lesions. The lesions in each animal either received patch implantation (treated group, n = 40 for 6 pigs) or left intact (untreated group, n = 44 for 6 pigs). The normal colonic wall in each animal received patch implantation at two spots to serve as control (n = 12 for 6 pigs). After 3 months of observation, the performance and safety of the patch treatment were evaluated through macroscopic and histological examination. We found that 95% of pouch-like herniation of the mucosa was prevented from the colon wall with the treatment. The pouch diameter was significantly reduced in the treated group as compared to the untreated group (p < 0.001). The patch application caused a significant increase in the levels of collagen of the colon tissue as compared to the untreated and control groups (p < 0.001). No difference was found in the lymphocyte and macrophage inflammatory infiltrate between the groups. Our results suggest that patch treatment efficiently inhibits the diverticular pouch deformation and promotes the healing of the colon wall with a normal inflammatory response, which may minimize the risk of diverticulosis reoccurrence and complications over time.

Changes of thoracic duct flow and morphology in an animal model of elevated central venous pressure.

Objective: Investigation of lymph fluid dynamics in thoracic duct during central venous pressure elevation. Background: Lymphatic flow is affected by elevated central venous pressure (CVP) in congestive heart failure. The changes of thoracic duct (TD) lymph flow have not been studied chronically in the setting of elevated CVP. This study is to investigate fluid dynamics and remodeling of the TD in the elevated CVP animal model. Methods: A flow probe was implanted on the swine TD (n = 6) and tricuspid regurgitation (TR) was created by cutting tricuspid chordae percutaneously. Six swine were used as control group animals. The TD flow was measured for 2 weeks (baseline) before TR and 4 weeks postop-TR surgery. Arterial pressure and CVP were measured. The pressure and flow in the TD were measured percutaneously. Histological and morphological analyses were performed. Results: TR resulted in an increase in CVP from 4.2 ± 2.6 to 10.1 ± 4.3 mmHg (p < 0.05). The lymph flow in the TD increased from 0.78 ± 1.06 before TR to 8.8 ± 4.8 ml/min (p < 0.05) 2 days post-TR and remained plateau for 4 weeks, i.e., the TD flow remained approximately 8-11 fold its baseline. Compared to the 8.1 ± 3.2 mmHg control group, the TD average pressures at the lymphovenous junction increased to 14.6 ± 5.7 mmHg in the TR group (p < 0.05). The TD diameter and wall thickness increased from 3.35 ± 0.37 mm and 0.06 ± 0.01 mm in control to 4.32 ± 0.57 mm and 0.26 ± 0.02 mm (p < 0.05) in the TR group, respectively. Conclusion: The elevated CVP results in a significant increase in TD flow and pressure which causes the TD's outward remodeling and thickening. Our study implicates that the outward remodeling may result in the TD valve incompetence due to failure coaptation of leaflets.

Computational analysis of mechanical stress in colonic diverticulosis.

Diverticulosis results from the development of pouch-like structures, called diverticula, over the colon. The etiology of the disease is poorly understood resulting in a lack of effective treatment approaches. It is well known that mechanical stress plays a major role in tissue remodeling, yet its role in diverticulosis has not been studied. Here, we used computational mechanics to investigate changes in stress distribution engendered over the colon tissue by the presence of a pouch-like structure. The objectives of the study were twofold: (1) observe how stress distribution changes around a single pouch and (2) evaluate how stress elevation correlates with the size of the pouch. Results showed that high stresses are concentrated around the neck of a pouch, and their values and propagation increase with the size of the pouch neck rather than the pouch surface area. These findings suggest that stress distribution may change in diverticulosis and a vicious cycle may occur where pouch size increases due to stress elevation, which in turn elevates stress further and so on. Significant luminal pressure reduction would be necessary to maintain stress at normal level according to our results and therapeutic approaches aimed directly at reducing stress should rather be sought after.

Morphometry and Lymph Dynamics of Swine Thoracic Duct.

Background: The goal of this study was to characterize the thoracic duct (TD) both morphologically and hemodynamically. Methods and Results: The lymphatic flow and pressure gradient from the cisterna chyli (CC) to the lymphovenous junction were measured in anesthetized swine (n = 9). After the animals were euthanized, the TD were harvested for histomorphometric analyses in which three samples were perfused with 9% gelatin to obtain the morphometry of the TD valve in both the open and closed configuration. Spectral analyses were performed. An afferent lymphatic vessel of the CC was accessed and cannulated after the animal was euthanized for casting (n = 3) to obtain morphometric data. The in vivo flow rate was 0.7 ± 0.49 mL/minute. Spectral analysis (Fast Fourier Transformation) showed correlation coefficients of 0.858 ± 0.063 and 0.586 ± 0.112 (p < 0.05) for the TD and JVPs, respectively. The average pressure gradient was 8.1 mmHg along the TD. The length of the TD was 35.6 ± 2.2 cm. The maximal width of the CC ranged from 11.4 to 15 mm. The diameter of the TD varied irregularly from 2 to 4.3 mm. The geometry of the TD leaflets was determined to have an area of 1.99 ± 0.53 mm2, a leaflet length of 3.26 ± 0.86 mm, a packet depth of 0.66 ± 0.19 mm, and a wall length of 5.46 ± 2.16 mm. The TD media thickness was ∼7 ± 3 µm. The number of valves ranged from 9 to 13 in the full length of the TD. Conclusions: A relatively constant pressure gradient in the swine TD drives lymph flow from the CC to the jugular vein. The TD is a thin-walled vessel with valves that prevent reflux of lymph flow. This study of morphometric and lymphatic dynamics is important for interventionalists to understand the anatomy and physiology of the TD to design new diagnostic, interventional procedures, and devices.

Novel swine model of colonic diverticulosis.

The pathophysiology of colonic diverticulosis has not been completely understood. The development of appropriate animal models is essential to study diverticular disease. To date, no large animal models are available for this disease condition. The objective of this study was to develop a swine model by damaging the colon wall, combined with or without a low-fiber diet to mimic the pathogenesis of diverticulosis. To create a weakness on the colon wall, collagenase was applied in vivo to degrade the collagen in the colon wall. Three groups of Yucatan minipigs were included. Group 1 (n = 12) underwent collagenase injection (CI) with a low-fiber diet for 6 mo, group 2 (n = 8) underwent CI alone with a standard swine diet for 6 mo, and group 3 (n = 12) received a low-fiber diet alone for 6 mo. We found that diverticulosis occurred in 91.7% (11 of 12) of pigs in the CI + diet group and 100% (8 of 8) in CI-alone group. Moreover, around 30-75% of colon CI spots for each pig developed diverticular lesions. Diet alone for 6 mo did not induce diverticulosis. The endoscopic and histological examinations revealed the formation of multiple wide-mouthed diverticular lesions along the descending colon. Our results provide convincing evidence of the high efficacy of the reduced colon wall strength caused by CI in the development of a swine model of diverticulosis. Low-fiber diet consumption for 6 mo had no influence on the generation time or incidence rate of diverticulosis. In this model, digestion of the collagen in the colonic wall is sufficient to cause diverticulosis. NEW & NOTEWORTHY Effective large animal models of diverticulosis are currently lacking for the study of diverticular disease. This study marks the first time that a swine model of diverticulosis was developed by damaging colon wall structure, combined with or without a low-fiber diet. We found that a defect of colon wall could result in colon diverticular lesions within 6 mo in swine. This animal model mimicking the pathological process of diverticulosis is of great clinical value.

Search for an Optimal Design of a Bioprosthetic Venous Valve: In silico and in vitro Studies.

OBJECTIVE/BACKGROUND: Valve incompetence is a progressive disease of the venous system that may eventually lead to venous hypertension, pain, and ulcers. There is a need for a venous valve prosthesis to replace incompetent valves. Computational and experimental investigations on venous valve design and associated haemodynamics will undoubtedly advance prosthesis design and treatments. Here, the objective is to investigate the effect of venous valve on the fluid and solid mechanics. The hypothesis is that there exists a valve geometry that maximises leaflet shear stress (LSS) but minimises leaflet intramural stress (LIS; i.e., minimise stress ratio = LIS/LSS). METHODS: To address the hypothesis, fully dynamic fluid-structure interaction (FSI) models were developed. The entire cycle of valve opening and closure was simulated. The flow validation experiments were conducted using a stented venous valve prosthesis and a pulse duplicator flow loop. RESULTS: Agreement between the output of FSI simulations and output of pulse duplicator was confirmed. The maximum flow rates were within 6% difference, and the total flow during the cycle was within 10% difference. The simulated high stress ratio region at the leaflet base (five times the leaflet average) predicted the disease location of the vast majority of explanted venous valves reported in clinical literature. The study found that the reduced valve height and leaflet dome shape resulted in optimal performance to provide the lowest stress ratio. CONCLUSION: This study proposes an effective design of venous prostheses and elaborates on the correlations of venous valve with clinical observations.

Biomechanical Material Characterization of Stanford Type-B Dissected Porcine Aortas.

Aortic dissection (AD) involves tearing of the medial layer, creating a blood-filled channel called false lumen (FL). To treat dissections, clinicians are using endovascular therapy using stent grafts to seal the FL. This procedure has been successful in reducing mortality but has failed in completely re-attaching the torn intimal layer. The use of computational analysis can predict the radial forces needed to devise stents that can treat ADs. To quantify the hyperelastic material behavior for therapy development, we harvested FL wall, true lumen (TL) wall, and intimal flap from the middle and distal part of five dissected aortas. Planar biaxial testing using multiple stretch protocols were conducted on tissue samples to quantify their deformation behavior. A novel non-linear regression model was used to fit data against Holzapfel-Gasser-Ogden hyperelastic strain energy function. The fitting analysis correlated the behavior of the FL and TL walls and the intimal flap to the stiffness observed during tensile loading. It was hypothesized that there is a variability in the stresses generated during loading among tissue specimens derived from different regions of the dissected aorta and hence, one should use region-specific material models when simulating type-B AD. From the data on material behavior analysis, the variability in the tissue specimens harvested from pigs was tabulated using stress and coefficient of variation (CV). The material response curves also compared the changes in compliance observed in the FL wall, TL wall, and intimal flap for middle and distal regions of the dissection. It was observed that for small stretch ratios, all the tissue specimens behaved isotropically with overlapping stress-stretch curves in both circumferential and axial directions. As the stretch ratios increased, we observed that most tissue specimens displayed different structural behaviors in axial and circumferential directions. This observation was very apparent in tissue specimens from mid FL region, less apparent in mid TL, distal FL, and distal flap tissues and least noticeable in tissue specimens harvested from mid flap. Lastly, using mixed model ANOVAS, it was concluded that there were significant differences between mid and distal regions along axial direction which were absent in the circumferential direction.

Validated Computational Model to Compute Re-apposition Pressures for Treating Type-B Aortic Dissections.

The use of endovascular treatment in the thoracic aorta has revolutionized the clinical approach for treating Stanford type B aortic dissection. The endograft procedure is a minimally invasive alternative to traditional surgery for the management of complicated type-B patients. The endograft is first deployed to exclude the proximal entry tear to redirect blood flow toward the true lumen and then a stent graft is used to push the intimal flap against the false lumen (FL) wall such that the aorta is reconstituted by sealing the FL. Although endovascular treatment has reduced the mortality rate in patients compared to those undergoing surgical repair, more than 30% of patients who were initially successfully treated require a new endovascular or surgical intervention in the aortic segments distal to the endograft. One reason for failure of the repair is persistent FL perfusion from distal entry tears. This creates a patent FL channel which can be associated with FL growth. Thus, it is necessary to develop stents that can promote full re-apposition of the flap leading to complete closure of the FL. In the current study, we determine the radial pressures required to re-appose the mid and distal ends of a dissected porcine thoracic aorta using a balloon catheter under static inflation pressure. The same analysis is simulated using finite element analysis (FEA) models by incorporating the hyperelastic properties of porcine aortic tissues. It is shown that the FEA models capture the change in the radial pressures required to re-appose the intimal flap as a function of pressure. The predictions from the simulation models match closely the results from the bench experiments. The use of validated computational models can support development of better stents by calculating the proper radial pressures required for complete re-apposition of the intimal flap.

Hemodynamics of venous valve pairing and implications on helical flow.

BACKGROUND: It has been shown that venous valves have pairing arrangements with specific relative orientation and spacing that contribute to helical flows. The studies to date have not quantified the hemodynamic impact of helical flow formation. A computational model allows various valve orientations and spacings to be studied to better understand the hemodynamic effect of valve pairing. METHODS: Simulations were performed for paired valves at physiologically relevant spacing and orientations to study the flow features and hemodynamics associated with valve pairing configurations. The wall shear stress (WSS), residence time, and pressure drop were evaluated for the various valve pairing cases. RESULTS: It was found that the WSS on the lumen flow side (front) of the leaflet is several times higher than on the valve pocket side (back). With orthogonal paired valves, the WSS at the critical back side is increased. Helical flow was clearly observed only with orthogonal valve pairing. The residence time was reduced to less than half (0.47 vs 1.16 seconds) in the orthogonal valve case compared with the parallel valve cases. The farther spaced valves (6 cm) had the highest residence time. CONCLUSIONS: This simulation study shows that helical flow in the veins of lower extremities is strongly dependent on the relative orientation and spacing of the valves. For optimal orientation (∼90 degrees) and spacing (∼4 cm), strong helical flow is seen, which enhances WSS and reduces the flow resistance and residence time. These findings demonstrate a structure-function relation that optimizes flow patterns in normal physiology, which can be compromised in venous valve disease. The results of this study provide valuable insights that improve the current understanding of blood flow patterns around venous valves and the design of future multiple paired prosthetic valves.

Post-fabrication QAC-functionalized thermoplastic polyurethane for contact-killing catheter applications.

The use of catheters is ubiquitous in medicine and the incidence of infection remains unacceptably high despite numerous advances in functional surfaces and drug elution. Herein we report the use of a thermoplastic polyurethane containing an allyl ether side-chain functionality (allyl-TPU) that allows for rapid and convenient surface modification with antimicrobial reagents, post-processing. This post-processing functionalization affords the ability to target appropriate TPU properties and maintain the functional groups on the surface of the device where they do not affect bulk properties. A series of quaternary ammonium thiol compounds (Qx-SH) possessing various hydrocarbon tail lengths (8-14 carbons) were synthesized and attached to the surface using thiol-ene "click" chemistry. A quantitative assessment of the amount of Qx-SH available on the surface was determined using fluorescence spectroscopy and X-ray photoelectron spectroscopy (XPS). Contact-killing assays note the Q8-SH composition has the highest antimicrobial activity, and a live/dead fluorescence assay reveals rapid contact-killing of Staphylococcus aureus (>75% in 5 min) and Escherichia coli (90% in 10 min) inocula. Scale-up and extrusion of allyl-TPU provides catheter prototypes for biofilm formation testing with Pseudomonas aeruginosa, and surface-functionalized catheters modified with Q8-SH demonstrate their ability to reduce biofilm formation.

Animal Models of Diverticulosis: Review and Recommendations.

Diverticulosis is a structural alteration of the colon tissue characterized by the development of pouch-like structures called diverticula. It afflicts a significant portion of the population in Western countries, with a higher prevalence among the elderly. Diverticulosis is believed to be the result of a synergetic interaction between inherent tissue weakness, diet, colonic microstructure, motility, and genetic factors. A validated etiology has, however, not yet been established. Non-surgical treatment is currently lacking due to this poor understanding, and surgical colon resection is the only long-term solution following recurrent complications. With rising prevalence, the burden of diverticulosis on patients and hospital resources has increased over the past several years. More efficient and less invasive treatment approaches are, thus, urgently needed. Animal models of diverticulosis are crucial to enable a preclinical assessment and evaluation of such novel approaches. This review discusses the animal models of diverticulosis that have been proposed to date. The current models require either a significant amount of time to develop diverticulosis, present a relatively low success rate, or seriously deteriorate the animals' systemic health. Recommendations are thus provided to address these pitfalls through the selection of a suitable animal and the combination of multiple risk factors for diverticulosis.

Constitutive modeling of the passive inflation-extension behavior of the swine colon.

In the present work, we propose the first structural constitutive model of the passive mechanical behavior of the swine colon that is validated against physiological inflation-extension tests, and accounts for residual strains. Sections from the spiral colon and the descending colon were considered to investigate potential regional variability. We found that the proposed constitutive model accurately captures the passive inflation-extension behavior of both regions of the swine colon (coefficient of determination R2=0.94±0.02). The model revealed that the circumferential muscle layer does not provide significant mechanical support under passive conditions and the circumferential load is actually carried by the submucosa layer. The stress analysis permitted by the model showed that the colon tissue can distend up to 30% radially without significant increase in the wall stresses suggesting a highly compliant behavior of the tissue. This is in-line with the requirement for the tissue to easily accommodate variable quantities of fecal matter. The analysis also showed that the descending colon is significantly more compliant than the spiral colon, which is relevant to the storage function of the descending colon. Histological analysis showed that the swine colon possesses a four-layer structure similar to the human colon, where the longitudinal muscle layer is organized into bands called taeniae, a typical feature of the human colon. The model and the estimated parameters can be used in a Finite Element framework to conduct simulations with realistic geometry of the swine colon. The resulting computational model will provide a foundation for virtual assessment of safe and effective devices for the treatment of colonic diseases.

Role of Re-entry Tears on the Dynamics of Type B Dissection Flap.

Mortality during follow-up after acute Type B aortic dissection is substantial with aortic expansion observed in over 59% of the patients. Lumen pressure differential is considered a prime contributing factor for aortic dilation after propagation. The objective of the study was to evaluate the relationship between changes in vessel geometry with and without lumen pressure differential post propagation in an ex vivo porcine model with comparison with patient clinical data. A pulse duplicator system was utilized to propagate the dissection within descending thoracic porcine aortic vessels for set proximal (%circumference of the entry tear: 40%, axial length: 2 cm) and re-entry (50% of distal vessel circumference) tear geometry. Measurements of lumen pressure differential were made along with quantification of vessel geometry (n = 16). The magnitude of mean lumen pressure difference measured after propagation was low (~ 5 mmHg) with higher pressures measured in false lumen and as anticipated the pressure difference approached zero after the creation of distal re-entry tear. False lumen Dissection Ratio (FDR) defined as arc length of dissected wall divided by arc length of dissection flap, had mean value of 1.59 ± 0.01 at pressure of 120/80 mmHg post propagation with increasing values with increase in pulse pressure that was not rescued with the creation of distal re-entry tear (p < 0.01). An average FDR of 1.87 ± 0.27 was measured in patients with acute Type B dissection. Higher FDR value (FDR = 1 implies zero dissection) in the presence of distal re-entry tear demonstrates an acute change in vessel morphology in response to the dissection independent of local pressure changes challenges the re-apposition of the aortic wall.

Role of vessel-to-prosthesis size mismatch in venous valve performance.

BACKGROUND: Efforts to treat chronic venous insufficiency have focused on the development of prosthetic venous valves. The role of prosthetic valve-to-vessel size matching has not been determined. The purpose of this investigation was to assess the effect of size mismatching on venous valve function and to establish a mismatch limit that affects valve hemodynamic performance and venous wall stress to improve future valve designs and implants. METHODS: Flow dynamics of prosthetic venous valves were studied in vitro using a pulse duplicator flow loop. Valve performance based on flow rate and pressure measurements was determined at oversizing ratios ranging from 4.2% to 25%. Valve open area ratios at different size mismatching ratios were investigated by image analysis. Finally, a wall stress analysis was used to determine the magnitude of circumferential (hoop) stress in the venous wall at various degrees of oversizing. RESULTS: Our findings indicate that valve regurgitate volume, closing time, and pressure difference across the valve are significantly elevated at mismatch ratios greater than ∼15%. This is supported by increases in regurgitate velocity and open area relative to valves tested at near-nominal diameters. At this degree of size mismatch, the wall stress is increased by a factor of two to three times relative to physiologic pressures. CONCLUSIONS: These findings establish a relationship between valve size matching and valve hemodynamic performance, including vessel wall stress, which should be considered in future valve implants. The size of the prosthetic valve should be within 15% of maximum vein size to optimize venous valve hemodynamic performance and to minimize the hoop wall stress.

Role of Pulse Pressure and Geometry of Primary Entry Tear in Acute Type B Dissection Propagation.

The hemodynamic and geometric factors leading to propagation of acute Type B dissections are poorly understood. The objective is to elucidate whether geometric and hemodynamic parameters increase the predilection for aortic dissection propagation. A pulse duplicator set-up was used on porcine aorta with a single entry tear. Mean pressures of 100 and 180 mmHg were used, with pulse pressures ranging from 40 to 200 mmHg. The propagation for varying geometric conditions (%circumference of the entry tear: 15-65%, axial length: 0.5-3.2 cm) were tested for two flap thicknesses (1/3rd and 2/3rd of the thickness of vessel wall, respectively). To assess the effect of pulse and mean pressure on flap dynamics, the %true lumen (TL) cross-sectional area of the entry tear were compared. The % circumference for propagation of thin flap (47 ± 1%) was not significantly different (p = 0.14) from thick flap (44 ± 2%). On the contrary, the axial length of propagation for thin flap (2.57 ± 0.15 cm) was significantly different (p < 0.05) from the thick flap (1.56 ± 0.10 cm). TL compression was observed during systolic phase. For a fixed geometry of entry tear (%circumference = 39 ± 2%; axial length = 1.43 ± 0.13 cm), mean pressure did not have significant (p = 0.84) effect on flap movement. Increase in pulse pressure resulted in a significant change (p = 0.02) in %TL area (52 ± 4%). The energy acting on the false lumen immediately before propagation was calculated as 75 ± 9 J/m2 and was fairly uniform across different specimens. Pulse pressure had a significant effect on the flap movement in contrast to mean pressure. Hence, mitigation of pulse pressure and restriction of flap movement may be beneficial in patients with type B acute dissections.

Microstructure and Mechanical Property of Glutaraldehyde-Treated Porcine Pulmonary Ligament.

There is a significant need for fixed biological tissues with desired structural and material constituents for tissue engineering applications. Here, we introduce the lung ligament as a fixed biological material that may have clinical utility for tissue engineering. To characterize the lung tissue for potential clinical applications, we studied glutaraldehyde-treated porcine pulmonary ligament (n = 11) with multiphoton microscopy (MPM) and conducted biaxial planar experiments to characterize the mechanical property of the tissue. The MPM imaging revealed that there are generally two families of collagen fibers distributed in two distinct layers: The first family largely aligns along the longitudinal direction with a mean angle of θ = 10.7 ± 9.3 deg, while the second one exhibits a random distribution with a mean θ = 36.6 ± 27.4. Elastin fibers appear in some intermediate sublayers with a random orientation distribution with a mean θ = 39.6 ± 23 deg. Based on the microstructural observation, a microstructure-based constitutive law was proposed to model the elastic property of the tissue. The material parameters were identified by fitting the model to the biaxial stress-strain data of specimens, and good fitting quality was achieved. The parameter e0 (which denotes the strain beyond which the collagen can withstand tension) of glutaraldehyde-treated tissues demonstrated low variability implying a relatively consistent collagen undulation in different samples, while the stiffness parameters for elastin and collagen fibers showed relatively greater variability. The fixed tissues presented a smaller e0 than that of fresh specimen, confirming that glutaraldehyde crosslinking increases the mechanical strength of collagen-based biomaterials. The present study sheds light on the biomechanics of glutaraldehyde-treated porcine pulmonary ligament that may be a candidate for tissue engineering.

Growth and remodeling of canine common iliac vein in response to venous reflux and hypertension.

OBJECTIVE: The passive properties of the venous wall are important for the compliance function of the venous system. The objective of this study was to quantify the passive biomechanical response and structural growth and remodeling of veins subjected to chronic venous reflux and hypertension. METHODS: To investigate the effects of venous reflux on venous mechanics, the tricuspid valve was injured in a canine model by disrupting the chordae tendineae. The conventional inflation-extension protocol in conjunction with intravascular ultrasound was used to investigate the passive biomechanical response of both control common iliac veins (n = 9 dogs) and common iliac veins subjected to 8 weeks of venous reflux and hypertension (n = 9 dogs). The changes in vein wall thickness and constituent composition were quantified by multiphoton microscopy and histologic evaluation. RESULTS: Biomechanical results indicate that the veins became less compliant when exposed to 8 weeks of chronic venous reflux and hypertension. The mechanical stiffening was found to be associated with a significant increase in wall thickness (P < .05) and collagen-to-elastin ratio (P < .05). After 8 weeks of chronic reflux and hypertension, the circumferential vein wall stress was significantly reduced (P < .05) because of wall thickening, although it was not restored to control levels. CONCLUSIONS: The growth and remodeling of the venous wall reduces the wall stress, but the stress remains higher than at baseline at 8 weeks. The compliance of the veins also decreases because of the increase in wall thickness and remodeling of the microstructure of the venous wall. These findings provide insight into potential adaptations of the venous system in reflux and hypertension.

Prosthetic venous valve patient selection by validated physics-based computational models.

BACKGROUND: There is significant interest in a venous prosthesis to replace insufficient valves. The aim of the current study was to select the patients with hemodynamic conditions most likely to benefit from a valve implant. The hypothesis is that the venous valve prosthesis is most suitable for patients with significant reflux, such as in chronic venous insufficiency (CVI), right heart hypertrophy (RHH), and right heart failure (RHF). Conversely, a prosthetic valve is likely to be of least benefit for deep venous thrombosis (DVT) patients with low flow. METHODS: To address this hypothesis, fully coupled fluid and solid mechanics computational models were developed and validated in five acute canine implants. The animal-validated simulations were then carried out for the CVI, RHH, RHF, and DVT patients based on literature hemodynamic data. A mechanical stress ratio of leaflet wall stress to fluid wall shear stress was defined to combine the effects of both fluid mechanics and solid mechanics on leaflet function, for which a lower stress ratio is hemodynamically desirable. RESULTS: The simulation results of mean valve flow velocity and percentage valve opening were found to be within 10% of the measurements in canines. The simulations show that the patients in the CVI classes 4 to 6, RHH patients, and RHF patients may have a significant reduction in stress ratio with virtual implant of a prosthetic valve. The DVT patient simulations demonstrate a minimal reduction in the stress ratio. After thrombus removal where flow is restored, however, the prosthetic valve may be helpful for post-thrombotic patients. CONCLUSIONS: For patient selections of the venous valve prosthesis, the most suitable patients are the CVI classes 4 to 6, RHH, and RHF patients. The least suitable patients are the DVT patients because a valve is not effective under low-flow conditions. The present study demonstrates a physics-based approach to patient selection that can be tested in future clinical trials.