An insight into viscosity and conductivity in the formulation of co-axial electrospun Carica papaya leaf extract.

Objective: This research aimed to investigate the application of the coaxial electrospun method for the production of natural extracts (papaya leaf extract) fibre films. This was achieved through utilising different polymers and with a focus on the conductivity and the viscosity of polymer solutions as critical parameters to generate successful fibres.Significance: Electrospinning is a promising trending manufacturing method for incorporating thermolabile herbal extracts using coaxial electrospun features. However, the complexity of the electrospinning process and the feasibility of the product required precise scrutiny.Methods: The electrospinning solution parameters (conductivity and viscosity) were evaluated by employing various ratios of Eudragit L100 (EL100) and Eudragit L100-55 (EL100-55) pre-spinning polymeric blend solutions. The electrospinning process and ambient parameters were optimised. Following that, the in-silico physicochemical properties of phytochemical marker, rutin, were illustrated using SwissADME web tool. Both freeze-dried Carica papaya leaf extract and its produced films were characterised using Scanning Electron Microscopy (SEM), Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR), polarised light microscopy, and X-ray Powder Diffraction (XRPD).Results: The optimal values of conductivity (≈40-44 × 10-4 S/m) and viscosity (≈32-42 × 10-3 Pa·s) were determined for producing evenly distributed and small fibre diameters in SEM images. These parameters significance was highlighted in acquiring and maintaining adequate tangential stress for fibre elongation, which would consequently affect the morphology and diameter of the fibres formed.Conclusion: In conclusion, the solution, process, and ambient parameters are significant in developing natural extracts into films via electrospinning technology, and this includes the promising Carica papaya leaf extract films produced by coaxial electrospinning.

Breaking barriers: bilosomes gel potentials to pave the way for transdermal breast cancer treatment with Tamoxifen.

OBJECTIVE: Breast cancer affects women globally, regardless of age or location. On the other hand, Tamoxifen (TXN), a class II biopharmaceutical drug is acting as a prophylactic/treating agent for women at risk of and/or with hormone receptor-positive breast cancer. However, its oral administration has life-threatening side effects, which have led researchers to investigate alternative delivery methods. One such method is transdermal drug delivery utilizing bile salts as penetration enhancers, aka Bilosomes. METHODS: Bilosomes formulations were optimized statistically for the outcome of vesicle shape, size, and entrapment efficiency using two types of bile, i.e. sodium taurocholate and sodium cholate. These bilosomes were then loaded into HPMC base gel and further characterized for their morphology, drug content, pH, viscosity, spreadability and eventually ex-vivo skin penetration and deposition studies. RESULTS: Findings showed that sodium cholate has superiority as a penetration enhancer over sodium taurocholate in terms of morphological characterizes, zeta potential, and cumulative amounts of tamoxifen permeated per unit area (15.13 ± 0.71 µg/cm2 and 6.51 ± 0.6 µg/cm2 respectively). In fact, bilosomes designed with sodium cholate provided around 9 folds of skin deposition compared to TXN non-bilosomal gel. CONCLUSION: Bilosomes gels could be a promising option for locally delivering tamoxifen to the breast through the skin, offering an encouraging transdermal solution.

Optimization of a Luteolin-Loaded TPGS/Poloxamer 407 Nanomicelle: The Effects of Copolymers, Hydration Temperature and Duration, and Freezing Temperature on Encapsulation Efficiency, Particle Size, and Solubility.

BACKGROUND: Luteolin is a flavonoid compound that has been widely studied for its various anti-cancer properties and sensitization to multidrug-resistant cells. However, the limited solubility and bioavailability of Lut hindered its potential clinical use. Theoretically, the combination of this compound with vitamin E TPGS and poloxamer 407 can produce a synergistic effect to enhance tumor apoptosis and P-glycoprotein inhibition. This study aimed to develop and optimize vitamin E TPGS/Poloxamer 407 micelles loaded with luteolin through investigating certain factors that can affect the encapsulation efficiency and particle size of the micelle. METHODS: A micelle was prepared using the film hydration method, and the micellar solution was lyophilized. The cake formed was analyzed. The factors investigated include the concentrations of the surfactants, ratio of vitamin E TPGS/Poloxamer 407, temperature of the hydrating solution, duration of hydration, and freezing temperature before lyophilization. The effects of these factors on the encapsulation efficiency and particle size of the micelle were also studied. The encapsulation efficiency was measured using a UV-Vis spectrophotometer, while particle size was measured using dynamic light scattering. RESULTS: The optimized micelle was found to have 90% encapsulation efficiency with a particle size of less than 40 nm, which was achieved using a 10% concentration of surfactants at a vitamin E TPGS/Poloxamer 407 ratio of 3:1. The optimized temperature for hydrating the micellar film was 40 °C, the optimized mixing time was 1 h, and the optimized freezing temperature was -80 °C. The solubility of the luteolin-loaded micelles increased 459-fold compared to pure Lut in water. The critical micelle concentration of the vitamin E TPGS/Poloxamer 407 micelle was 0.001 mg/mL, and the release study showed that luteolin-loaded micelles exhibited sustained release behavior. The release of luteolin from a micelle was found to be higher in pH 6.8 compared to pH 7.4, which signified that luteolin could be accumulated more in a tumor microenvironment compared to blood. CONCLUSION: This study demonstrated that several factors need to be considered when developing such nanoparticles in order to obtain a well-optimized micelle.

Aflatoxin tests in herbal products and its quantification: Latest updates.

Aflatoxin is naturally occurring mycotoxins produced by fungi. The existence of aflatoxin in herbal medicines is a well-known issue. The detection of aflatoxin with good sensitivity and also that is reliable in complex matrices like herbs usually necessitates difficult processes and powerful detection instrument in preparation of sample. This study investigated the global occurrence of aflatoxin contamination herbal products. This article pivots on key breakthroughs in preparation of sample and its importance in analytical technology. Studies from published studies were screened to determine the general level of aflatoxin contamination. The countries involved were Malaysia, Indonesia, Kenya, Brazil, Nigeria, Thailand, South Africa, and Morocco. This review also includes recent studies on the development and application of screening assays such as lateral flow immunoassays, enzyme-linked immunosorbent assays, aptamer-based lateral flow assays, and cytometric bead arrays, as well as traditional chromatographic techniques for aflatoxin qualification or quantitation. The current study looks at aflatoxin contamination of key herbal drug raw material, which are frequently used in the production of numerous herbal pharmaceuticals. Contamination of aflatoxin might occur in herbal products if the ingredients such as medicinal herbs and plants that are used in manufacturing of herbal products are not dried thoroughly or stored inappropriately after preparation.

Formulation Development of Mirtazapine Liquisolid Compacts: Optimization Using Central Composite Design.

Mirtazapine is a tetracyclic anti-depressant with poor water solubility. The aim of this study was to improve the dissolution rate of mirtazapine by delivering the drug as a liquisolid compact. Central composite design (CCD) was employed for the preparation of mirtazapine liquisolid compacts. In this, the impacts of two independent factors, i.e., excipient ratio (carrier:coating) and different drug concentration on the response of liquisolid system were optimized. Liquisolid compacts were prepared using propylene glycol as a solvent, microcrystalline cellulose as a carrier, and silicon dioxide (Aerosil) as the coating material. The crystallinity of the formulated drug and the interactions between the excipients were examined using X-ray powder diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR), respectively. The dissolution study for the liquisolid compact was carried out as per FDA guidelines. The results showed loss of crystallinity of the mirtazapine in the formulation and was completely solubilized in non-volatile solvent and equally dispersed throughout the powder system. Moreover, drug dissolution was found to be higher in liquisolid compacts than the direct compressed conventional tablets (of mirtazapine). The liquisolid technique appears to be a promising approach for improving the dissolution of poorly soluble drugs like mirtazapine.

The Effects of Solid Particle Containing Inks on the Printing Quality of Porous Pharmaceutical Structures Fabricated by 3D Semi-Solid Extrusion Printing.

PURPOSE: Semi-solid extrusion (SSE) 3D printing has potential pharmaceutical applications for producing personalised medicine. However, the effects of ink properties and drug incorporation on the quality of printed medication have not been thoroughly studied, particularly for porous geometries. This study aimed to investigate the effects of the presence of solid drug particles in SSE inks on the printing quality of porous structures. METHOD: The rheological behaviour of model inks of paracetamol (PCM)-hypromellose (HPMC) with different drug loadings were investigated and correlated to their printing qualities. RESULTS: For the inks with PCM loading above the drug solubility in which suspended solid drug particulates were present, the results confirmed that PCM loading and particle size significantly affected the ink viscosities at a low shear rate. At a low shear rate, the highest viscosity was identified when the highest drug loading and the smallest PCM particles were incorporated into the inks. However, the results indicated that the SSE printing parameters and printing quality of porous structures (with less porous structural deformation) have no clear correlation with the shear viscosity data, but a strong correlation with the dynamic oscillatory rheology of the inks. CONCLUSION: The key rheological parameters including storage modulus, loss modulus and complex viscosity of the ink increased with increasing drug loading for the inks containing solid drug particles. However, decreasing the particle size did not have a clear effect on the oscillatory rheology of the inks which can be potentially used for optimising the SSE 3D printing quality of porous geometries.

A stability-indicating HPLC-UV method for the quantification of anthocyanin in Roselle (Hibiscus Sabdariffa L.) spray-dried extract, oral powder, and lozenges.

Hibiscus sabdariffa L. (H.S.) plant and its calyces have received much attention from researchers because of their potential medicinal and nutritional values. Calyces are the major source of anthocyanin in this plant. Therefore, a well-developed, efficient, and accurate analytical method is needed to assure proper standardization and control the quality of H.S. plant herbal and nutraceutical products. The objective of this work is to develop a simple, rapid, stability-indicating HPLC-UV method for the quantitative determination of anthocyanin in spray-dried aqueous extract (SDE), oral powder, and compressible lozenges formulations using Delphinidin-3-O-sambubioside (Dp3S) as a marker compound. The chromatographic conditions were optimized using Eclipse plus® C18 column. The mobile phase comprised water acidified with 0.2% formic acid (FA) and acetonitrile (ACN) (90:10, v/v) using a gradient system at a flow rate of 0.8 mL/min. The detection wavelength was 525 nm. The column was maintained at 45 °C, and the injection volume was 15 µL. The developed method was validated according to the international conference of harmonization (ICH) guidelines for linearity, detection and quantitation limits, accuracy, precision, specificity, and robustness. Forced degradation studies under acid, base, oxidation, heat, and U.V light, were performed on the pure compound, extract, and the H.S. developed formulations. Significant degradation of the compound was observed under all tested conditions except U.V. light, where degradation was minimum. There was no interference from impurities, degradation products, or excipients at the retention time of Dp3S 3.2 min indicating the specificity of the method. The developed method was statistically confirmed to be accurate, precise, and reproducible. This simple, rapid, and specific method can be employed efficiently to determine anthocyanin in H.S. plant extract and nutraceutical products.

Nanocrystalline cellulose isolation via acid hydrolysis from non-woody biomass: Importance of hydrolysis parameters.

The use of nanocrystalline cellulose (NCC) as a renewable and green biomaterial in diverse value-added applications has roused substantial interest. Sourcing NCCs from the abundantly available non-woody biomass becomes attractive due to its high cellulose content and low cost. Acid hydrolysis using mineral acids has been widely explored as a facile, low-cost, and efficient way of isolating NCCs. Still, the technical aspect of the extraction procedure is lacking. This review gathers the available knowledge on the NCC extraction using hydrolysis with mineral acids from non-woody biomass and provides a critical overview of the extraction parameters to be considered from the feedstocks and related pretreatment to the final hydrolysis procedure. To fulfill an operationally feasible production of NCCs, this review shares considerations and challenges on the biomass characteristics and pretreatment as well as hydrolysis parameters for optimizing NCC production and tailoring its application.

The Effect of Carrier-Drug Ratios on Dissolution Performances of Poorly Soluble Drug in Crystalline Solid Dispersion System.

The choice of carrier and drug ratio are critical factors as far as the type of solid dispersion is concerned. Amorphous solid dispersion has been cited as the most desirable type among the different types of solid dispersion due to the benefit of amorphicity in increasing the drug solubility of a poorly soluble drug. Recent reports delineated that a partially crystalline solid dispersion system may perform better due to the inherent issue of solution mediated recrystallisation of a completely amorphous system. In oppose to the conventional choice of using amorphous polymer, this study aimed to investigate the use of a crystalline carrier, polyethylene glycol (PEG) for dissolution enhancement of a model poorly soluble drug, Flurbiprofen (FBP), a BCS Class II candidate. Solid dispersions of different FBP to PEG 6000 molar ratios via solvent evaporation were prepared. Physical characterisation of preparations was performed using differential scanning calorimetry (DSC), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and optical microscope. DSC and ATR-FTIR analyses suggest the obtained solid dispersion exhibits crystalline FBP. This is then supported by the optical microscope analysis as the birefringence of crystals was noted. Further increasing the drug-carrier molar ratio to one-to-three and one-to-six showed that there was an amorphous FBP constituent in the system. DSC analysis revealed the melting point depression of FBP by the carrier which signifies interaction between the drug and polymer. Dissolution study showed the solid dispersion of FBP improves the drug solubility and drug release compared to the pure drug. A higher carrier ratio in the formulation results in a higher drug release.

The evaluation of healing effect of triclosan and flurbiprofen-loaded nanogels in experimental periodontitis in rats by morphometric analysis.

PURPOSE: To evaluate therapeutic effectiveness of antibacterial triclosan (TCS) and anti-inflammatory flurbiprofen (FLB)-loaded nanogels system in ligature-induced experimental periodontitis in rats. METHODOLOGY: A total of 72 Sprague-Dawley rats were used in this study. Four groups (n = 18 each) were randomly created: Group 1 - neither subjected to experimental periodontitis nor to any treatment; Group 2 - subjected to experimental periodontitis but not treated; Group 3 - subjected to experimental periodontitis and then treated with the developed nanogels; Group 4 - subjected to experimental periodontitis and then placed on a mixture of pure TCS and FLB treatment. The experimental periodontitis was induced on the lower incisors by applying a ligature which was kept for 14 days. Treatment was done for 7 days, and sampling was done at 7, 14, and 28 day of the post-induction experimental period. Morphometric analysis was conducted to assess the clinical outcomes and healing effect. RESULTS: The morphometric findings showed that the group treated with the developed TCS and FLB-loaded nanogels recovered better and faster than a mixture of pure TCS and FLB. At 28 day of the experimental period, there was no significant difference (p > 0.05) between the baseline control group and the nanogels treated group. CONCLUSIONS: The developed TCS and FLB-loaded nanogels was found to be effective in the treatment of experimental periodontitis in rats. The used experimental periodontitis model was found to be simple and easily reproducible.

Phytochemical and Therapeutic Potential of Citrus grandis (L.) Osbeck: A Review.

Citrus grandis or Citrus maxima, widely recognized as Pomelo is widely cultivated in many countries because of their large amounts of functional, nutraceutical and biological activities. In traditional medicine, various parts of this plant including leaf, pulp and peel are used for generations as they are scientifically proven to have therapeutic potentials and safe for human use. The main objective of this study was to review the different therapeutic applications of Citrus grandis and the phytochemicals associated with its medicinal values. In this article different pharmacological properties like antimicrobial, antitumor, antioxidant, anti-inflammatory, anticancer, antiepileptic, stomach tonic, cardiac stimulant, cytotoxic, hepatoprotective, nephroprotective, and anti-diabetic activities of the plant are highlighted. The enrichment of the fruit with flavonoids, polyphenols, coumarins, limonoids, acridone alkaloids, essential oils and vitamins mainly helps in exhibiting the pharmacological activities within the body. The vitamins enriched fruit is rich in nutritional value and also has minerals like calcium, phosphorous, sodium and potassium, which helps in maintaining the proper health and growth of the bones as well as the electrolyte balance of the body. To conclude, various potential therapeutic effects of Citrus grandis have been demonstrated in recent literature. Further studies on various parts of fruit, including pulp, peel, leaf, seed and it essential oil could unveil additional pharmacological activities which can be beneficial to the mankind.

The Interplay between Drug and Sorbitol Contents Determines the Mechanical and Swelling Properties of Potential Rice Starch Films for Buccal Drug Delivery.

Rice starch is a promising biomaterial for thin film development in buccal drug delivery, but the plasticisation and antiplasticisation phenomena from both plasticisers and drugs on the performance of rice starch films are not well understood. This study aims to elucidate the competing effects of sorbitol (plasticiser) and drug (antiplasticiser) on the physicochemical characteristics of rice starch films containing low paracetamol content. Rice starch films were prepared with different sorbitol (10, 20 and 30% w/w) and paracetamol contents (0, 1 and 2% w/w) using the film casting method and were characterised especially for drug release, swelling and mechanical properties. Sorbitol showed a typical plasticising effect on the control rice starch films by increasing film flexibility and by reducing swelling behaviour. The presence of drugs, however, modified both the mechanical and swelling properties by exerting an antiplasticisation effect. This antiplasticisation action was found to be significant at a low sorbitol level or a high drug content. FTIR investigations supported the antiplasticisation action of paracetamol through the disturbance of sorbitol-starch interactions. Despite this difference, an immediate drug release was generally obtained. This study highlights the interplay between plasticiser and drug in influencing the mechanical and swelling characteristics of rice starch films at varying concentrations.

Quantification of atovaquone from amorphous solid dispersion formulation using HPLC: An in vitro and ex vivo investigation.

Atovaquone (ATQ) is a poorly soluble drug. Therefore, formulating ATQ into its supersaturated state through solid dispersion for bioavailability enhancement can be of great value. However, due to fast crystallising properties of ATQ, the quantification of ATQ in a supersaturated solid dispersion system can be complicated. Therefore, in pursuit of accurate quantification of such sample, a simple HPLC analytical method utilising a C18 column (250 × 4.6 mm ID, 5 µm) for the quantitation of ATQ has been developed and validated. Atovaquone elution using the proposed method demonstrated a retention time around 7.6 min with good linearity (R2 > 0.999). The system suitability is also detailed with the tailing factor at 1.365 ± 0.002. The addition of solubilising agent as sample treatment step aided in ensuring the accurate quantitation of the fast crystallising ATQ. The developed HPLC quantitation method has been successfully employed in the analysis of ATQ from solid dispersion samples in in vitro dissolution as well as ex vivo permeation studies for formulation development.

Two successful deliveries of healthy children by a young woman diagnosed and treated during induction and relapsed therapy for acute promyelocytic leukemia.

INTRODUCTION: Acute promyelocytic leukemia is an oncologic emergency. The limited cases reported in the literature have led to poor understanding of the safety of management of acute promyelocytic leukemia during pregnancy. CASE REPORT: Herein is an acute promyelocytic leukemia case of a 22-year-old young pregnant woman who had various social problems. The patient was diagnosed with acute promyelocytic leukemia in her the second trimester of her first pregnancy.Management and outcome: She was treated with all-trans-retinoic acid with idarubicin and successfully delivered a healthy baby. She completed induction with idarubicin but defaulted her all-trans-retinoic acid, 6-mercaptopurine and methotrexate maintenance. She relapsed after one year and was salvaged with all-trans-retinoic acid high dose cytarabine and arsenic trioxide. She went into remission and had autologous stem cells collected and was planned for an autologous stem cell transplant but she defaulted. She relapsed when she was pregnant with her second baby during her third trimester (29+weeks) 10 months later. Salvage chemotherapy with arsenic trioxide, all-trans-retinoic acid and idarubicin was given. Patient underwent an emergency lower segment caesarian section at 31 weeks of pregnancy due to abnormal fetal cardiotocography. A healthy baby was delivered. DISCUSSION: This drug regimen is controversial during pregnancy owing to the teratogenic effects and fatal retinoic acid syndrome especially in early gestation. In this case, patient was started the induction therapy of all-trans-retinoic acid treatment at her second trimester during her first pregnancy. CONCLUSION: Our lady demonstrated the possibility of using all-trans-retinoic acid and arsenic trioxide and chemotherapy during second and third trimester with successful pregnancy outcomes.

Sustainable Dissolution Performance of a Carrier Tailored Electrospun.

PURPOSE: This study aims to conduct an impact investigation in the hydrophobic-hydrophilic balance as an important factor for dissolution improvement of a hydrophilic carrier-based solid dispersion system. METHODS: Polymeric carriers with different hydrophobic to hydrophilic ratios were used to prepare several electrospun solid dispersion formulations. Physicochemical properties and surface morphology of the samples were assessed using Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR), polarized light microscopy, Differential Scanning Calorimetry (DSC), X-ray Powder Diffraction (XRPD) and Scanning Electron Microscopy (SEM). Dissolution study was conducted in a non-sink condition to assess the drug release. RESULTS: Incorporation of a higher amount of hydrophilic component showed an improvement in formulating a fully amorphous system based on XRPD, yet the dissolution rate increment showed no significant difference from the lower. Hence, the degree of crystallinity is proven not to be the crucial factor contributing to dissolution rate improvement. The presence of a concomitant hydrophobic component, however, showed ability in resisting precipitation and sustaining supersaturation. CONCLUSION: Hydrophobicity in a binary carrier system plays an important role in achieving and maintaining the supersaturated state particularly for an amorphous solid dispersion. Graphical Abstract.

Formulation strategy of nitrofurantoin: co-crystal or solid dispersion?

Poor solubility and bioavailability of drugs are often affected by its microscopic structural properties. Nitrofurantoin (NF), a Biopharmaceutics Classification System class II item, has a low water solubility with low plasma concentrations. To improve its therapeutic efficacy, formulation strategy of solid dispersion (SD) and co-crystallization are compared herein. The co-crystal is prepared with citric acid in 1:1 stoichiometric ratio while SD consists of 30% w/w nitrofurantoin and 70% w/w hydroxypropyl methylcellulose (HPMC) as the carrier system. As a control, the physical mixture of NF and HPMC was prepared. All the preparations were characterized with differential scanning calorimetry (DSC), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), microscopy analysis, solubility, and dissolution studies. The formation of co-crystal, solvent evaporated, and spray-dried SD are confirmed by the ATR-FTIR where peaks shifting of several functional groups indicate the formation of the hydrogen bond. Dissolution studies showed a greater initial dissolution rate in co-crystal than SD despite the possible presence of amorphous content in the SD system. Overall, co-crystal is concluded to be a better approach than SD for an effective dissolution.

A dual-action chitosan-based nanogel system of triclosan and flurbiprofen for localised treatment of periodontitis.

This study aimed to develop a dual action, namely anti-inflammatory and antimicrobial, nanogels (NG) for the treatment of periodontitis using triclosan (TCS) and flurbiprofen (FLB). Triclosan, an antimicrobial drug, was prepared as nanoparticles (NPs) using poly-ε-caprolactone (PCL), while flurbiprofen, an anti-inflammatory drug, was directly loaded in a chitosan (CS) based hydrogel. The entwinement of both NPs and hydrogel loaded systems resulted in the NG. The characterisation data confirmed that the developed formulation consists of nanosized spherical structures and displays pH-dependent swelling/erosion and temperature-responsiveness. Besides, the NG exhibited adequate bioadhesiveness using the chicken pouch model and displayed antibacterial activity through the agar plate method. An in-vivo study of the NG on experimental periodontitis (EP) rats confirmed the dual antibacterial and anti-inflammatory effects which revealed an excellent therapeutic outcome. In conclusion, a dual action NG was successfully developed and proved to have superior therapeutic effects in comparison to physical mixtures of the individual drugs.

Rice starch thin films as a potential buccal delivery system: Effect of plasticiser and drug loading on drug release profile.

Rice starch is known to have an excellent film-forming behaviour in the packaging industry but inadequate attention was given to this biopolymer to be developed into thin films for drug delivery. Accordingly, rice starch thin films containing a model drug, paracetamol and plasticisers (glycerol or sorbitol) were developed using film casting technique. This study focuses on investigating the impact of plasticiser and drug loading on drug release pattern of rice starch films which has not been explored to date. The obtained rice films were characterised for their physicochemical properties including swelling and dissolution study. The highest drug dissolution rate was achieved in the rice films with a low drug loading due to drug amorphicity in nature. When drug loading increases, the swelling behaviour of rice films plays a dominant role in releasing drug in the crystalline form. The role of plasticiser was indicated by the plasticiser-starch interaction where a strong interaction allows drug solubilisation more readily in the dissolution medium. It is envisaged that rice films could be tailored to achieve desired drug release pattern with different plasticiser.

The improved dissolution performance of a post processing treated spray-dried crystalline solid dispersion of poorly soluble drugs.

CONTEXT: Solution-mediated transformation has been cited as one of the main problems that deteriorate dissolution performances of solid dispersion (SD). This is mainly attributed by the recrystallization tendency of poorly soluble drug. Eventually, it will lead to extensive agglomeration which is a key process in reducing the dissolution performance of SD and offsets the true benefit of SD system. Here, a post-processing treatment is suggested in order to reduce the recrystallization tendency and hence bring forth the dissolution advantage of SD system. OBJECTIVES: The current study investigates the effect of a post processing treatment on dissolution performance of SD in comparison to their performances upon production. METHODS: Two poorly soluble drugs were spray dried into SD using polyvinyl alcohol (PVA) as hydrophilic carrier. The obtained samples were post processing treated by exposure to high humidity, i.e. 75% RH at room temperature. The physical properties and release rate of the SD system were characterized upon production and after the post-processing treatment. RESULTS AND DISCUSSION: XRPD, Infrared and DSC results showed partial crystallinity of the fresh SD systems. Crystallinity of these products was further increased after the post-processing treatment at 75% RH. This may be attributed to the high moisture absorption of the SD system that promotes recrystallization process of the drug. However, dissolution efficiencies of the post-treated systems were higher and more consistent than the fresh SD. The unexpected dissolution trend was further supported by the results intrinsic dissolution and solubility studies. CONCLUSIONS: An increase of crystallinity in a post humidity treated SD did not exert detrimental effect to their dissolution profiles. A more stabilized system with a preferable enhanced dissolution rate was obtained by exposing the SD to a post processing humidity treatment.

An investigation into the influence of drug-polymer interactions on the miscibility, processability and structure of polyvinylpyrrolidone-based hot melt extrusion formulations.

While hot melt extrusion is now established within the pharmaceutical industry, the prediction of miscibility, processability and structural stability remains a pertinent issue, including the issue of whether molecular interaction is necessary for suitable performance. Here we integrate the use of theoretical and experimental drug-polymer interaction assessment with determination of processability and structure of dispersions in two polyvinylpyrrolidone-based polymers (PVP and PVP vinyl acetate, PVPVA). Caffeine and paracetamol were chosen as model drugs on the basis of their differing hydrogen bonding potential with PVP. Solubility parameter and interaction parameter calculations predicted a greater miscibility for paracetamol, while ATR-FTIR confirmed the hydrogen bonding propensity of the paracetamol with both polymers, with little interaction detected for caffeine. PVP was found to exhibit greater interaction and miscibility with paracetamol than did PVPVA. It was noted that lower processing temperatures (circa 40°C below the Tg of the polymer alone and Tm of the crystalline drug) and higher drug loadings with associated molecular dispersion up to 50% w/w were possible for the paracetamol dispersions, although molecular dispersion with the non-interactive caffeine was noted at loadings up to 20% w./w. A lower processing temperature was also noted for caffeine-loaded systems despite the absence of detectable interactions. The study has therefore indicated that theoretical and experimental detection of miscibility and drug-polymer interactions may lead to insights into product processing and extrudate structure, with direct molecular interaction representing a helpful but not essential aspect of drug-polymer combination prediction.