RESUMEN
A technigal with the polydimethylsiloxane (PDMS) solution infiltrated into the SiOx-coated CNTAs has been utilized to directly transfer the CNTAs away from the silicon substrate. The oxide coating layer was utilized to protect the morpholgy of as-grown patterned vertical aligmed carbon nanotube (CNTs) arrays. The high density plasma reactive ions etching (HDP-RIE) system was used to make the CNTs emerge from the surface of the flexible substrate and modify the crystallines of CNTs. After the protecting oxide was HDP-RIE-processed for 8 min, the emission current properties were enhanced to be 1.03 V/microm and 1.43 V/microm, respectively, for the turn-on field and the threshold field, as compared with 1.25 V/microm and 1.59 V/microm for the as-grown CNTs, accordingly. The Field Emission (FE) enhancement after dry etching could be attributed to the open-ended structures and better crystalline.
RESUMEN
The effects of active layer thickness and device dimensions on nanometal-induced crystallization (nano-MIC) were studied to determine the electrical characteristics of the polycrystalline silicon (poly-Si) thin-film transistors (TFTs) with bottom-gate structures. The nano-MIC poly-Si film was obtained via deposition of a 0.4-nm-thick Ni film on the amorphous silicon layer and subsequent annealing at 550 degrees C for 0.5 to 8 h. The EDS revealed a approximately 0.1% Ni concentration in the poly-Si film. The cross-sectional TEM image shows the vertical-grain growth mechanism, where the bottom side of the grain exhibits a larger crytalline area than the top side. Therefore, the field effect mobility of the bottom-gate poly-Si TFTs increases with increased active-amorphous-silicon (a-Si) thickness. Furthermore, the mobility increases when the device dimensions are scaled down. A mechanism for explaining such phenomenon in relation to the nano-MIC bottom-gate poly-Si TFTs was also proposed.
RESUMEN
A transparent ultraviolet (UV) sensor using nanoheterojunctions (NHJs) composed of p-type NiO nanoflowers (NFs) and n-type ZnO nanowires (NWs) was prepared through a sequential low-temperature hydrothermal-growth process. The devices that were annealed in an oxygen (O2) ambient exhibited better rectification behavior (I forward/I reverse = 427), a lower forward threshold voltage (V(th) = 0.98 V), a lower leakage current (1.68 x 10(-5) A/cm2), and superior sensitivity (I uv/I dark = 57.8; I visible/I dark = 1.25) to UV light (lambda = 325 nm) than the unannealed devices. The remarkably improved device performances and optoelectronic characteristics of the annealed p-NiO-NF/n-ZnO-NW NHJs can be associated with their fewer structural defects, fewer interfacial defects, and better crystallinity. A stable and repeatable operation of dynamic photoresponse was also observed in the annealed devices. The excellent sensitivity and repeatable photoresponse to UV light of the hydrothermally grown p-NiO-NF/n-ZnO-NW NHJs annealed in a suitable O2 ambient indicate that they can be applied to nano-integrated optoelectronic devices.
RESUMEN
The aluminum-doped ZnO (AZO) nanostructures with different Al concentrations were synthesized on AZO/glass substrate via a simple hydrothermal growth method at a temperature as low as 85 degrees C. The morphologies, crystallinity, optical emission properties, and chemical bonding states of AZO nanostructures show evident dependence on the aluminum dosage. The morphologies of AZO nanostructures were changed from vertically aligned nanowires (NWs), and NWs coexisted with nanosheets (NSs), to complete NSs in respect of the Al-dosages of 0-3 at.%, 5 at.%, and 7 at.%, correspondingly. The undoped ZnO and lightly Al-doped AZO (< or = 3 at.%) NWs are single-crystalline wurtzite structure. In contrast, heavily Al-doped AZO sample is polycrystalline. The AZO nanostructure with 3 at.% Al-dosages reveals the optimal crystallinity and less structural defects, reflecting the longest carrier lifetime and highest conductivity. Consequently, the field-emission characteristics of such an AZO emitter can exhibit the higher current density, larger field-enhancement factor (beta) of 3131, lower turn-on field of 2.17 V/microm, and lower threshold field of 3.43 V/microm.