RESUMEN
The presence of inorganic and organic substances may alter the physicochemical properties of iron (Fe) salt precipitates, thereby stabilizing the antimony (Sb) oxyanions in potable water during the chemical treatment process. Therefore, the present study aimed to examine the surface characteristics, size of Fe flocs and coagulation performance of Sb oxyanions under different aqueous matrices. The results showed that surface properties of Fe flocs significantly varies with pH in both Sb(III, V) suspensions, thereby increasing the mobility of Sb(V) ions in alkaline conditions. The negligible change in surface characteristics of Fe flocs was observed in pure water and Sb(III, V) suspension at pH 7. The key role of Van der Waals forces of attraction as well as hydration force in the aggregation of early formed flocs were found, with greater agglomeration capability at higher more ferric chloride dosage. The higher Sb(V) loading decreased the size of Fe flocs and reversed the surface charge of precipitates, resulting in a significant reduction in Sb(V) removal efficiency. The competitive inhibition effect on Sb(III, V) removal was noticed in the presence of phosphate anions, owing to lowering of ζ-potential values towards more negative trajectory. The presence of hydrophobic organic matter (humic acid) significantly altered the surface characteristics of Fe flocs, thereby affecting the coagulation behavior of Sb in water as compared to the hydrophilic (salicylic acid). Overall, the findings of this research may provide a new insight into the variation in physicochemical characteristics of Fe flocs and Sb removal behavior in the presence of inorganic and organic compounds during the drinking water treatment process.
RESUMEN
Copper is the third most common heavy metal and an indispensable component of life. Variations of body copper levels, both structural and cellular, are related to a number of disorders; consequently, the pathophysiological importance of copper ions demands the development of sensitivity and selection for detecting these organisms in biological systems. In recent years, the area of fluorescent sensors for detecting copper metal ions has seen revolutionary advances. Consequently, closely related fields have raised awareness of several diseases linked to copper fluctuations. Further developments in this field of analysis could pave the way for new and innovative treatments to combat these diseases. This review reports on recent progress in the advancement of three fields of fluorescent probes; chemodosimeters, near IR fluorescent probes, and ratiometric fluorescent probes. Methods used to develop these fluorescent probes and the mechanisms that govern their reaction to specific analytes and their applications in studying biological systems, are also given.
Asunto(s)
Cobre , Colorantes Fluorescentes , Cobre/química , Colorantes Fluorescentes/química , Iones/análisis , MetalesRESUMEN
The widespread usage of nano-copper oxide particles (nano-CuO) in several industrial products and applications raises concerns about their release into water bodies. Thus, their elimination from drinking water is essential to reduce the risk to human health. This work investigated the removal of nano-CuO from pure water and montmorillonite clay (MC) suspensions using poly aluminum ferric chloride (PAFC) as well as cationic polyacrylamide (PAM) by the coagulation-flocculation-sedimentation (C/F/S) process. Moreover, the PAFC and PAFC/PAM flocculation performance for various nano-CuO particles concentrations, dosages, pH, settling times and stirring speeds were also investigated. The findings showed that the removal of nano-CuO and turbidity in MC suspension were higher as compared to pure water. Moreover, the combined effect of PAFC/PAM on the elimination of nano-CuO and turbidity was also substantially better than the individual use of PAFC or PAM. The efficient removal of CuO was observed in the solution containing higher mass concentration in the order (10 mg/L > 2.5 mg/L > 1 mg/L) with an increased coagulant dose. The improved removal performance of nano-CuO was observed in a pH range of 7-11 under various water matrices. The C/F/S conditions of nano-CuO were further optimized by the Box-Behnken statistical experiment design and response surface methodology. The PAFC/PAM dose resulted in the maximum removal of nano-CuO (10 mg/L) in both pure water (>97%) and MC suspension (>99%). The results of particle monitoring and Fourier transform infrared of composite flocs revealed that the main removal mechanism of nano-CuO may be the combined effect of neutralization, complexation as well as adsorption.