Aggregation-induced emission enhancement (AIEE) of tetrarhenium(I) metallacycles and their application as luminescent sensors for nitroaromatics and antibiotics.

The self-assembly of tetrarhenium metallacycles [{Re(CO)3}2(µ-dhaq)(µ-N-N)]2 (3a, N-N = 1,3-bis(1-butylbenzimidazol-2-yl)benzene; 3b, N-N = 1,3-bis(1-octylbenzimidazol-2-yl)benzene), (H2-dhaq = 1,4-dihydroxy-9,10-anthraquinone) and [{Re(CO)3}2(µ-thaq)(µ-N-N)]2 (4, N-N = 1,3-bis(1-butylbenzimidazol-2-yl)benzene), (H2-thaq = 1,2,4-trihydroxy-9,10-anthraquinone) under solvothermal conditions is described. The metallacycles 3a,b and 4 underwent aggregation-induced emission enhancement (AIEE) in THF upon the incremental addition of water. TEM images revealed that metallacycle 3a in a 60% aqueous THF solution formed rectangular aggregates with a wide size distribution, while a 90% aqueous THF solution resulted in the formation of a mixture of nanorods and amorphous aggregates due to rapid and abrupt aggregation. UV-vis and emission spectral profiles supported the formation of nanoaggregates of metallacycles 3a,b and 4 upon the gradual addition of water to a THF solution containing metallacycles. Further studies indicated that these nanoaggregates were excellent probes for the sensitive and selective detection of nitro group containing picric acid (PA) derivatives as well as antibiotics.

A Rotation-Inversion Dual-Motion Molecular Switch: Race for NMR Signaling.

The interplay between the thermal helical inversion (THI) of the stiff-stilbene moiety and the rotation of the dimethylamino (DMA) group in 1 results in a dependence of the DMA NMR signals on the THI kinetics in (E)-1 but the rotation kinetics in (Z)-1, because the faster motion mode is responsible. Consequently, the photochemical switching from (E)-1 to (Z)-1 illustrates the phenomenon of "switchable motion detection" by the same set of NMR signals in a dual-motion molecular system.

Singlet Biradical Versus Triplet Biradical/Zwitterion Characteristics in Isomers of C6 -C5 -C6 -C7 -C6 -Fused Pentacyclic Aromatic Hydrocarbons Revealed through Reactivity Patterns.

Among various polycyclic aromatic hydrocarbons, C6 -C5 -C6 -C7 -C6 fused pentacyclic aromatic hydrocarbons have the unique potential to adopt quinonoid, zwitterion, singlet, or triplet biradical electronic configurations. Two such hybrid structures between pentacene and azulene were synthesized and their ground state electronic configurations were deduced from the reactivity patterns they exhibit respectively. Compound 6, where the radicaloid carbons are linked through a para-phenylene, forms a head-to-head dimer like a singlet biradical. In contrast, isomer 7, where the para-linkage was switched to meta, reacts readily with oxygen which resembles the reactivity of a triplet state. The oxidized intermediate(s) then undergoes rearrangement to furnish the C6 -C5 -C6 -C6 -C6 ring contraction product 13. Cation 14, the protonated form of 7, was synthesized, which implies 7 also reacts like a zwitterion. It was revealed the oxidative rearrangement takes place even with mesityl dibenzotropylium cation despite its perceived aromaticity. DFT calculations confirm the most stable forms of 6 and 7 are singlet and triplet diradical, which is consistent with the observed reactivity of respective molecules.

Charge transport properties of open-shell graphene fragments: a computational study of the phenalenyl tilings.

Thinking outside the box of the phenalenyl radical: a systematic structure design strategy, phenalenyl tiling, is found to benefit the electron transport properties of open-shell graphene fragments with one free radical. Compared with the closed-shell species, phenalenyl-based π-radicals exhibit smaller intramolecular reorganization energies and larger intermolecular electronic couplings. However, the on-site Coulomb repulsion can be too strong and impedes the charge transport efficiency of such materials. The repulsion can be weakened in radical species by spin delocalization. In this paper, the extended π-radicals we studied are categorized into three types of open-shell structures: the zigzag, the armchair and the discotic odd alternant hydrocarbons. The latter two belong to phenalenyl tilings. We found that the phenalenyl tilings fully inherit the desirable features of the singly occupied molecular orbital of the phenalenyl radical in a predictable and delocalized fashion, and their on-site Coulomb repulsion is effectively reduced. The zigzag π-radicals are less satisfactory. Therefore, the phenalenyl tilings are favorable candidates for charge transporting materials.

A Molecular Rotor That Probes the Helical Inversion of Stiff-Stilbene.

Probing the inversion kinetics of a molecular helix is inherently a challenging task. We demonstrate herein that a fast-rotating pentiptycene component could function as an external NMR probe to afford the kinetic information on the inversion of a neighboring helical stiff-stilbene unit.

Synthesis and Physical Study of Perylene and Anthracene Polynitrile as Electron Acceptors.

Attaching electron-withdrawing nitrile groups to π-conjugated systems is an effective approach toward electron acceptors. By combining various cyanation methodologies, perylene and anthracene polynitriles with up to eight nitrile substituents on one aromatic scaffold were synthesized. This strategy produces stable electron acceptors with lowest unoccupied molecular orbital (LUMO) levels comparable to benchmark acceptors. A very stable octanitrile anion was also produced serendipitously. Reactivity patterns of these acceptors were rationalized by density functional theory (DFT) calculation.

Dicyclopenta[ghi,pqr]perylene as a Structural Motif for Bowl-Shaped Hydrocarbons: Synthetic and Conformational Studies.

Dicyclopenta[ghi,pqr]perylene (DCPP) is a substructural fragment on the surface of C70 yet not on C60. Unlike its intensely investigated buckybowl cousins, corannulene and sumanene, DCPP is largely ignored due to the lack of synthetic accessibility. This communication describes the first preparation of a DCPP derivative from bay substituted perylene bis(4-(trifluoromethyl)phenyl)methanol as the key cyclization precursor. Further incorporation of indeno substitutions at peri positions was accomplished through Suzuki-Heck benzannulation. DCPP derivatives 4 adopts a planar structure in crystal. On the contrary, indeno DCPP 5 and bis-indeno DCPP 6 adopt the bowl-shaped conformation in both the solid state and solution. Density functional theory (DFT) calculation reveals that the lowest-energy conformations of 4, 5, and 6 are all bowl-shaped. Nevertheless, small bowl-to-bowl inversion barrier for 4 (3.4 kcal/mol) is overcome by the crystal packing force, which leads to its observed planar structure. However, the bowl-shaped structures of 5 and 6 are affirmed by DFT calculation with intermediate and high bowl-to-bowl inversion barriers (10.4 and 18.5 kcal/mol, respectively).

Carrier Transport and Recombination Mechanism in Blue Phosphorescent Organic Light-Emitting Diode with Hosts Consisting of Cabazole- and Triazole-Moiety.

In this study, we demonstrated a blue phosphorescent organic light-emitting diode (BPOLED) based on a host with two carbazole and one trizole (2CbzTAZ) moiety, 9,9'-(2-(4,5-diphenyl-4H-1,2,4-triazol-3-yl)-1,3-phenylene)bis(9H-carbazole), that exhibits bipolar transport characteristics. Compared with the devices with a carbazole host (N,N'-dicarbazolyl-3,5-benzene, (mCP)), triazole host (3-(biphenyl-4-yl)-5-(4-tert-butylphenyl)-4-phenyl-4H-1,2,4-triazole, (TAZ)), or a physical mixture of mCP:TAZ, which exhibit hole, electron, and bipolar transport characteristics, respectively, the BPOLED with the bipolar 2CbzTAZ host exhibited the lowest driving voltage (6.55 V at 10 mA/cm2), the highest efficiencies (maximum current efficiency of 52.25 cd/A and external quantum efficiency of 23.89%), and the lowest efficiency roll-off, when doped with bis[2-(4,6-difluorophenyl)pyridinato-C2,N](picolinato)iridium(III) (FIrpic) as blue phosphor. From analyses of light leakage of the emission spectra of electroluminescence, transient electroluminescence, and partially doped OLEDs, it was found that the recombination zone was well confined inside the emitting layer and the recombination rate was most efficient in a 2CbzTAZ-based OLED. For the other cases using mCP, TAZ, and mCP:TAZ as hosts, electrons and holes transported with different routes that resulted in carrier accumulation on different organic molecules and lowered the recombination rate.

A computational study of the Fenton reaction in different pH ranges.

The reaction of iron(ii) and hydrogen peroxide, namely the Fenton reaction, is well-known for its strong oxidizing capability. While the Fenton reactions are ubiquitous and have wide applications in many areas, the detailed mechanism, especially the nature of the reactive intermediates responsible for oxidation, is not completely clear. In this work, the performances of various density functional theory (DFT) methods on the relative energies of key Fenton intermediates are evaluated. The DFT method selected from the benchmark study is then exploited to investigate the aqueous Fenton reactions in different pH conditions. The results show that at pH > 2.2, the major Fenton oxidants are high-valent oxoiron(iv) aquo complexes. However, depending on the pH conditions, these complexes can exist in three protonation states that display quite different oxidation reactivities. The oxidizing power of FeIV[double bond, length as m-dash]O is found to be principally determined by the total charge of the ligands and is less influenced by the axial ligand effect. Moreover, the calculations reveal that the presence of the hydronium ion can stabilize the intermediate of the hydroxyl radical and further inhibit oxoiron(iv) formation via proton transfer. The contribution of hydroxyl radicals could compete with the oxoiron(iv) species at pH below 2.2. In addition, high-level ab initio calculations question the existence of the iron(iv)-dihydroxo intermediate suggested in the literature. The implications of the computational results for the Fenton oxidation process, cytochrome P450, and catalyst design are discussed.

Redox-Gated Tristable Molecular Brakes of Geared Rotation.

p-Bis(arylcarbonyl)pentiptycenes 2 (aryl = 4-(trifluoromethyl)phenyl) and 3 (aryl = mesityl) have been prepared and investigated as redox-gated molecular rotors. For 2, rotations about the pentiptycene-carbonyl bond (the α rotation) and about the aryl-carbonyl bond (the ß rotation) are independent, and the rotation barriers are 11.3 and 9.5 kcal mol-1, respectively, at 298 K. In contrast, the α and ß rotations in 3 are correlated (geared) in a 2-fold cogwheel pathway between the aryl and the pentiptycene groups with a much lower rotation barrier of 6.5 kcal mol-1 at 298 K in spite of the bulkier aryl groups. Electrochemical reduction of the neutral forms led first to radical anions (2•- and 3•-) and then to a bis(radical anion) for 22- but a dianion for 32-. The redox operations switch the independent α and ß rotations in 2 into a geared rotation in both 2•- and 22- and result in a slow-fast-stop rotation mode for 2-2•--22-. The two redox states 3•- and 32- retain the geared α and ß rotations and follow a fast-slow-stop mode for 3-3•--32-. Both molecular systems mimic tristable molecular brakes and display 8-9 orders of magnitude difference in rotation rate through the redox switching.

UV-activated multilayer nanomatrix provides one-step tunable carbohydrate structural characterization in MALDI-MS.

The structure-specific fragmentation of gas-phase ions in tandem mass spectrometry among other techniques provides an efficient analytical method for confirming unknown analytes or for elucidating chemical structures. Using concentration-dependent UV-absorbing matrix-functionalized magnetic nanoparticles and matrix-assisted laser desorption-ionization mass spectrometry (MALDI MS), we developed a single-step pseudo-MS/MS approach for tunable ionization and fragmentation to facilitate structure determination. Without chemical derivatization, we have demonstrated that this approach successfully distinguished isomeric sets of di-, tri- and tetrasaccharides. Low concentration of nanomatrix provided an enhanced signal for accurate mass determination of the intact molecular ions of analytes present in the sample. In contrast, high concentration of nanomatrix induced extensive and unique fragmentation, including high-energy facile bond breakage (A- and X-type cross-ring cleavages), which facilitated the linkage and sequence characterization of oligosaccharides without conventional tandem mass spectrometric instrumentation. The practicality of this approach for complex sample analysis was evaluated by an oligosaccharide mixture, wherein molecular ions are unambiguously observed and signature product ions are distinguishable enough for molecular identification and isomer differentiation by this simple tunable approach. By probing the roles of the multilayer nanomatrix components: matrix (energy absorption), silane-coating (energy pooling and dissipation) and core Fe3O4 (fragmentation), a plausible energy transfer mechanism was proposed based on a computational study and photoelectron experiments. The differentiation of tri- and tetra-oligosaccharide shown in this study not only demonstrated the first step toward glycan characterization by nanoparticle-assisted MALDI-MS, but also shed some insight on the nanoparticle-mediated energy transfer dynamics behind our approach.

A rotary molecular motor gated by electrical energy.

DFT calculations predict that the chiral pentiptycene derivative E-1 possesses distinct rotational potential energy surfaces in the neutral vs the radical anionic (E-1(•-)) form such that continued electrochemical switching between E-1 and E-1(•-) could lead to a directional rotation of the pentiptycene rotor about the exocyclic C-C bond. The time scale of random Brownian rotation is ∼10(6) s for E-1 and ∼170 s for E-1(•-) at 150 K, and thus a switching time scale of 0.2 s could readily bias the rotation direction to >99% at 150 K. The synthetic feasibility, line-shape analysis on the VT (1)H NMR spectra, and electrochemical redox switching of E-1 are demonstrated.

Cooperative effect of unsheltered amide groups on CO2 adsorption inside open-ended channels of a zinc(II)-organic framework.

A unique spatial arrangement of amide groups for CO2 adsorption is found in the open-ended channels of a zinc(II)-organic framework {[Zn4(BDC)4(BPDA)4]·5DMF·3H2O}n (1, BDC = 1,4-benzyl dicarboxylate, BPDA = N,N'-bis(4-pyridinyl)-1,4-benzenedicarboxamide). Compound 1 consists of 4(4)-sql [Zn4(BDC)4] sheets that are further pillared by a long linker of BPDA and forms a 3D porous framework with an α-Po 4(12)·6(3) topology. Remarkably, the unsheltered amide groups in 1 provide a positive cooperative effect on the adsorption of CO2 molecules, as shown by the significant increase in the CO2 adsorption enthalpy with increasing CO2 uptake. At ambient condition, a 1:1 ratio of active amide sites to CO2 molecules was observed. In addition, compound 1 favors capture of CO2 over N2. DFT calculations provided rationale for the intriguing 1:1 ratio of amide sorption sites to CO2 molecules and revealed that the nanochamber of compound 1 permits the slipped-parallel arrangement of CO2 molecules, an arrangement found in crystal and gas-phase CO2 dimer.

A design strategy for motion control systems with identical binding sites.

Molecular motion control systems such as bistable rotaxanes or molecular elevators are mostly designed with different binding sites. In this theoretical study, it is demonstrated that, with the use of a redox reaction center and its position effect, it is possible to build a motion control system with identical binding sites.

Substituent effect on the structural behavior of modified cyclodextrin: a molecular dynamics study on methylated ß-CDs.

A series of methylated and non-methylated ß-cyclodextrin (ß-CD) structures in three macrocyclic configurations (a-c) were studied with molecular dynamics (MD) simulations to elucidate the dynamic behavior of the different CD structures using a continuum water model with the AMBER* force field. A set of parameters were defined to describe the geometric dimensions of the CD, such as its cavity shape, the upper and lower rim sizes, and the tilting of each of the glucose rings. Correlation analyses between the different parameters were carried out, and they have provided insights into the different dynamic behaviors for the different CD structures. Detailed analyses on the crystal structures of the different methylated and non-methylated ß-CD complexes were also carried out using the defined parameters. Correlation of parameters from crystal structures and MD simulations has allowed us to identify the effect that crystal packing/guest inclusion has on the CD geometries. The overall analysis approach can be a useful tool for other related macrocyclic structures, such as modified α-, ß-CDs or even calixarenes.

Intriguing electrochemical behavior of free base porphyrins: effect of porphyrin-meso-phenyl interaction controlled by position of substituents on meso-phenyls.

Electrochemical properties of substituted free base meso-tetraphenylporphyrins (H(2)T(o,o'-X)PP, H(2)T(o-X)PP, and H(2)T(p-X)PP, where X = OCH(3), CH(3), H, F, or Cl on the phenyl rings) are examined by cyclic voltammetry. When a substituent is located only at the para position of the meso-phenyl group, the difference between the first and second oxidation potentials (ΔE(ox), i.e., E(2)(ox) - E(1)(ox)), is generally significantly smaller than those of the H(2)TPPs with bulky o,o'-substituents on the phenyl group. This trend is elucidated with density functional theory calculations and attributed mainly to the sterically controlled π-conjugation of the meso-phenyl groups to the central porphyrin ring, rather than the often discussed deformation of porphyrin.

Factors that regulate the conformation of m-benziporphodimethene complexes: agostic metal-arene interaction, hydrogen bonding, and η2,π coordination.

Group 12 and silver(I) tetramethyl-m-benziporphodimethene (TMBPDM) complexes with phenyl, methylbenzoate, or nitrophenyl groups as meso substituents were synthesized and fully characterized. The dimeric silver(I) complex displays an unusual η(2),π coordination from the ß-pyrrolic C=C bond to the silver ion. All of the complexes displayed a close contact between the metal ion and the inner C(22)-H(22) on the m-phenylene ring. The downfield chemical shifts of H(22) and large coupling constants between Cd(II) and H(22) strongly support the presence of an agostic interaction between the metal ion and inner C(22)-H(22). Crystal structures revealed that the syn form is the predominant conformation for TMBPDM complexes. This is distinctively different from the exclusive anti conformation observed in m-benziporphyrin and tetraphenyl-m-benziporphodimethene (TPBPDM) complexes. Evidently, intramolecular hydrogen-bonding interactions between axial chloride and methyl groups stabilize syn conformations. Unlike the merely syn conformation observed in the solid-state structures of TMBPDM complexes that contain an axial chloride, in solution these complexes display highly solvent- and temperature-dependent syn/anti ratio changes. The observation of dynamic (1)H NMR spectroscopic scrambling between syn and anti conformations from the titration of chloride ion into the solution of the TMBPDM complex suggests that axial ligand exchange is a likely pathway for the conversion between syn and anti forms. Theoretical calculations revealed that intermolecular hydrogen-bonding interactions between the axial chloride and CHCl(3) stabilizes the anti conformation, which explains the increased ratio for the anti form when dichloromethane or chloroform was used as the solvent.

Toward a four-toothed molecular bevel gear with C2-symmetrical rotors.

The design, synthesis, conformational analysis, and variable-temperature NMR studies of pentiptycene-based molecular gears Pp(2)X, where Pp is the unlabeled (in 1H) or methoxy groups-labeled (in 1OM) pentiptycene rotor and X is the phenylene stator containing ortho-bridged ethynylene axles, are reported. The approach of using shape-persistent rotors of four teeth but C(2) symmetry for constructing four-toothed molecular gears is unprecedented. In addition, the first example of enantioresolution of chiral pentiptycene scaffolds is demonstrated. Density functional theory (DFT) and AM1 calculations on these Pp(2)X systems suggest two possible correlated torsional motions, geared rocking and four-toothed geared rotations, which compete with the uncorrelated gear slippage. The DFT-derived torsional barriers in 1H for rocking, four-toothed rotation, and gear slippage are approximately 2.9, 5.5, and 4.7 kcal mol(-1), respectively. The low energy barriers for these torsional motions result from the low energy cost of bending the ethynylene axles. Comparison of the NMR spectra of 1OM in a mixture of stereoisomers (1OM-mix) and in an enantiopure form (1OM-op) confirms a fast gear slippage in these Pp(2)X systems. The effect of the methoxy labels on rotational potential energy surface and inter-rotor dynamics is also discussed.

A pentiptycene-derived molecular brake: photochemical E→Z and electrochemical Z→E switching of an enone module.

The synthesis and brakelike performance of a new molecular system (1) consisting of a pentiptycene rotor and a 2-methyleneindanone brake are reported. The rotation kinetics of the rotor was probed by both variable-temperature (1)H and (13)C NMR spectroscopy and DFT calculations, and the switching between the brake-on and brake-off states was conducted by a combination of photochemical and electrochemical isomerization. Because of the greater steric hindrance between the rotor and the brake units in the Z form ((Z)-1) than in the E form ((E)-1), rotation of the rotor is slowed down 500-fold at room temperature (298 K) on going from (E)-1 to (Z)-1, corresponding to the brake-off and brake-on states, respectively. The (E)-1→(Z)-1 photoisomerization in acetonitrile is efficient and reaches an (E)-1/(Z)-1 ratio of 11:89 in the photostationary state upon excitation at 290 nm, attributable to a much larger isomerization quantum efficiency for (E)-1 versus (Z)-1. An efficient (Z)-1→(E)-1 isomerization (96%) was also achieved by electrochemical treatment through the radical anionic intermediates. Consequently, the reversibility of the E-Z switching of 1 is as high as 85%. The repeated E-Z switching of 1 with alternating photochemical and electrochemical treatments is also demonstrated.

High performance single-crystal field-effect transistors based on twisted polyaromatic semiconductor pyreno[4,5-a]coronene.

A novel p-channel semiconductor pyreno[4,5-a]coronene has been synthesized and characterized. The highly fused π-conjugated framework has a twisted geometry with an excellent on-top cofacial π-π stacking in the crystal structure and with a centroid-to-centroid distance of 3.808 Å. Single-crystal field effect transistors based on the molecule exhibit a high mobility of ~0.89 cm(2) V(-1) s(-1) and an on/off ratio of ~6 × 10(4).