Changes in complacency to adherence to COVID-19 preventive behavioral measures and mental health after COVID-19 vaccination among medical and dental healthcare professionals.

Medical and dental professionals should continue to adhere to preventive measures after COVID-19 vaccination due to their increased risk of exposure to the virus, particularly as new variants emerge that may heighten their risk perception and susceptibility. Therefore, this study aimed to explore the effects of COVID-19 vaccination on complacency to adherence to COVID-19 preventive behavioral measures and mental health among medical and dental professionals. In this cross-sectional study 410 medical and dental professionals were recruited from different medical and dental hospitals in Islamabad, Pakistan. The data was collected using a valid and reliable questionnaire comprising of three sections (socio-demographic, information of preventive behaviors performance against COVID-19 after vaccination, mental health status). A chi-square test and ordinal logistic regression were used for analysis. Post COVID-19 vaccination there was decrease in the frequency of use of hand washing, sanitizers (70.2%), and social distancing (60.5%), however greeting with a handshake (58.8%) and use of public transport (45.9%) seen upward trend among participants. Only face mask usage post-vaccination was statistically significant (p < .05) in association with age, marital status, and years of working Experience. The greatest decrease in the usage of masks after COVID-19 vaccination was seen in age group of 10-30 (41.7%) and working experience group of 0-5 years (39.7%). All the preventive behaviors are statistically significant (p < .05) associated with the mental status of the participants except online shopping and use of public transport. These results indicate the presence of vaccination-induced complacency in adherence to COVID-19 preventive behavioral measures among healthcare professionals.

Comparative in-vivo bond failure rate of orthodontic brackets when bracket base is treated with micro-abrasive blasting vs. acid etching: eighteen month randomized control trial and scanning electron microscope study.

Background: The aim of this study was threefold. Firstly, it aimed to introduce and detail a novel method for chemically etching the bases of stainless-steel orthodontic brackets. Secondly, the study sought to investigate the structural alterations within the brackets' microstructure following chemical etching compared to those with sandblasted bases, using electron microscopy analysis. Lastly, the study aimed to evaluate and compare the long-term durability and survivability of orthodontic brackets with chemically etched bases versus those with sandblasted bases, both bonded using the conventional acid etch technique with Transbond XT adhesive, over an 18-month follow-up period. Methods: The study was a randomized clinical control trial with triple blinding and split-mouth study design and consisted of two groups. The brackets in the sandblasted group were prepared by sandblasting the intaglio surface of the base of the bracket with 50 µm SiO2 particles. Hydrofluoric acid was used to roughen the base in the acid-etched group. The bases of the brackets were viewed under an electron microscope to analyze the topographical changes. Results: A total of 5,803 brackets (3,006 acid-etch, 2,797 sandblasted) in 310 patients were bonded, in a split-mouth design by the same operator. The patients were followed for 18 months. The failure rate of 2.59% and 2.7% was noted in an acid-etched and sandblasted group, respectively. There was a close approximation of curves in the Kaplan-Meier plot, and the survival distribution of the two groups in the log-rank (Mantel-Cox) test was insignificant; x2 = 0.062 (P value = 0.804). Conclusion: Acid etching if the bases of the brackets can be used as an alternative to sandblasting furthermore acid etching can be performed on the chair side.

The Association Between Economic Status and Religious Identity With Oral Health Disparities and Inequalities Around the World.

INTRODUCTION: The inequalities in oral health remain one of the current issues in the global public health agenda. The number of studies investigating health disparity by religious identity is limited and there is currently no such report relating to oral health. Similarly, there is compelling evidence for oral health disparities between socioeconomic statuses, education levels, and ethnic groups. This ecological study aimed to explore the disparity in oral health-related outcomes between Muslim and non-Muslim countries and country income status. METHODS: Publicly available data related to oral health measures, country income status, and membership in the Organization of Islamic countries were used. Five oral health-related measures were examined: caries experience (decayed, missing, and filled teeth (DMFT)), percentage of the population with no periodontal disease, and disability-adjusted life years (DALY) attributed to oral conditions, and mouth and oropharynx cancer. One-way analysis of variance (ANOVA) and Kruskal-Wallis tests were used to compare the oral health parameters by country income status and simple linear regression was used to compare the parameters between the non-member countries (n-MC) and member countries (MC). For the significant parameters, adjusted coefficients were obtained using multiple linear regression. RESULTS: From 170 countries included, 53 (31%) were MC and 117 (69%) were n-MC. Analysis showed that the mean DMFT in adults aged 35-44 years was significantly higher in the n-MC compared to MC after adjusting for country income status (p<0.05) but the latter was the stronger explanatory predictor of the outcome. The strength of the effect of country membership classification (standardized coefficient ß: DMFT35-44-year-old = -0.16) was smaller than country income status (ß = -0.60) in the multiple regression. CONCLUSION: There is significant but weak evidence from the available data to support the claim that economic status and religion contribute to oral health disparity.

Caries risk assessment by Caries Management by Risk Assessment (CAMBRA) Protocol among the general population of Pakistan-a multicenter analytical study.

Background: Caries risk (CR) assessment tools are used to properly identify individuals with caries risk and to improve preventive procedures and programs. A tool such as CAMBRA determines the precise protective factors of caries and identifies an individual's specific therapeutic intervention. The purpose of this study was to assess the caries risk using the CAMBRA protocol among the general population of Pakistan. Methods: This multicentre analytical study was conducted in ten dental hospitals in different provinces of Pakistan and the caries risk assessment was carried out using a questionnaire that was designed using the Caries Management by Risk Assessment (CAMBRA) protocol. All 521 participants were intra-orally examined to assess oral hygiene status and the presence of disease. Multiple logistic regression test was performed for analysis. Results: A higher number of participants (61.2%) were found to be in the moderate risk category of caries risk assessment. The males are 51% less likely to have caries compared to the females (AOR = 0.49, P = 0.081). The majority of participants (71.3%) had one or more disease indicators, with white spots and visible cavities. Those with visible, heavy plaque were 13.9 times more likely to have caries compared to those without (AOR = 13.92, P < 0.001). Those using calcium and phosphate during the last 6 months were 90% less likely to have caries compared to those not using them (AOR = 0.10, P < 0.001). There was no significant interaction between all eight risk factors retained in the final model (P > 0.05), the Hosmer and Lemeshow Test P < 0.001, classification accuracy = 87.1%, and AUC = 91.2%. Conclusion: The caries risk among the general population of Pakistan is moderate, with significant variation among age groups, education levels, and socioeconomic status.

Navigating post COVID-19 education: an investigative study on students' attitude and perception of their new normal learning environment.

Background: The incidence and aftermath of the COVID-19 pandemic brought about a drastic change in health professional education around the world. Traditional classrooms made way for online classrooms in order to ensure that learning continued in a safe and secure environment. However, how well health professional students perceived and accepted these changes have not been fully gauged yet. Therefore, this study aims to evaluate the perception of health professional students about their new educational climate. Methods: A modified and validated Dundee Ready Education Environment Measure (DREEM) questionnaire was used to collect data regarding student perception of their educational environment. Results: The mean DREEM scores for three time periods were in the accepted positive range of 101 to 150 indicating that most of the students perceived the changes positively. The results indicated that most students preferred blended learning over online learning or face-to-face learning alone. Areas where students were unsatisfied with their learning environment that need improvement were identified by poor item-wise scores. Conclusion: Strategic remedial measures for these concerns need to be developed to improve the quality of education received by the students. However, the results of our study indicated that most of the students were able to adapt positively to the new education environment due to the change in the circumstances during COVID.

Barriers and challenges faced by orthodontists in providing orthodontic care and implementing new innovative technologies in the field of orthodontics among children and adults: a qualitative study.

Orthodontic treatment requires the cooperation of patients as well as orthodontists. Therefore, the aim of the study was to investigate and address the challenges and barriers orthodontists have in achieving the desired orthodontic results, as well as make recommendations for ways to address the stated problems and introduce new innovative technologies to the area of orthodontics. This qualitative study wasbased on the grounded theory. Twelve orthodontists participated in face-to-face interviews, which were primarily comprised of open-ended questions. Data analysis was carried out manually using the "by hand" method. Orthodontists between the age group of 29-42 were interviewed. The answers varied depending on the years of experience of the interviewees. Teenagers and boys were found to be most non-compliant with the treatment. The average treatment span ranged between 6 months for mild cases up to 3 years for severe orthodontic cases occurring most commonly in government hospitals. Patient compliance plays a major role in orthodontics. Poor oral hygiene maintenance, brackets breakage by patients, and missed appointments were the major concerns mentioned by participants and hindered getting the desired results. Patients' main worries were related to the cost of therapy, premolar extractions, the length of treatment, and the possibility of relapse. Patient counseling and reinforcement at the start of the treatment can help to overcome the challenges and barriers in orthodontics since patient motivation is a very important factor in obtaining the desired results. It is recommended to conduct more training sessions for the orthodontists in order to introduce them to new technological paradigms.

Comparison of the elastic recovery and strain-in-compression of commercial and novel vinyl polysiloxane impression materials incorporating a novel crosslinking agent and a surfactant.

This study aims to formulate experimental vinylpolysiloxane (VPS) impression materials and compare their elastic recovery and strain-in-compressions with three commercial VPS materials (Aquasil, Elite, and Extrude). Five experimental materials (Exp), two hydrophobic (Exp-I and II) and three hydrophilic (Exp-III, IV and V) were developed. Exp 1 contained vinyl-terminated poly-dimethyl siloxane and a conventional cross-linking agent (poly methylhydrosiloxane), while Exp- II contained a novel cross-linking agent that is tetra-functional dimethyl-silyl-ortho-silicate (TFDMSOS). Exp III-V (hydrophilic materials) were formulated by incorporating different concentrations of non-ionic surfactant (Rhodasurf CET-2) into Exp II formulation. Measurement of elastic recovery and strain-in-compression for commercial and experimental materials were performed according to ISO4823 standard using the calibrated mechanical testing machine (Tinius Olsen). One-way analysis of variance (one-way ANOVA) and Tukey's post-hoc (HSD) test were used for statistical analysis and a p-value of ≤ 0.05 was considered significant. Exp-I has statistically similar values to commercial VPS. The Exp-II showed the highest elastic recovery, while % elastic recovery was reduced with the addition of the non-ionic surfactant (Rhodasurf CET-2). The % reduction was directly related to the concentration of Rhodasurf CET-2. In addition, Exp II had significantly higher strain-in-compression values compared to Exp-I and commercial materials. These values were further increased with the addition of a non-ionic surfactant (Rhodasurf CET-2) was added (Exp-III, IV and V).

Oral Health-Related Quality of Life in Patients with Chronic Oral Mucosal Diseases: Reliability and Validity of Urdu Version of Chronic Oral Mucosal Disease Questionnaire (COMDQ).

The aim of the study was to translate and validate the Urdu version of the Chronic Oral Mucosal Disease Questionnaire (COMDQ) and measure the oral health-related quality of life (OHRQoL) in Pakistani patients with chronic oral mucosal disease. One hundred and twenty patients with chronic oral mucosal diseases were recruited for this study. Two types of reliability of the COMDQ were tested. First, the internal consistency was calculated using Cronbach's alpha, and second, test-retest reliability was calculated using intraclass correlation coefficients (ICC). Convergent validity was assessed for testing the validity of the COMDQ by examining the correlations with the Visual Analogue Scale (VAS) and OHIP-14 using Pearson's correlations coefficient, and a t-test was used to compare the COMDQ domains and the socio-demographic characteristics. The most prevalent chronic oral mucosal disease (COMD) among the participants was recurrent aphthous stomatitis (47.5%), and the least prevalent was oral granulomatosis (6.6%). The total mean score for COMDQ was 43.5 (SD = 18.4). It showed a high level of internal consistency (Cronbach's a = 0.81), and test-retest reliability was also good (r = 0.85). The total score of COMDQ was strongly correlated with the total score of OHIP-14 and VAS (r = 0.86 and r = 0.83), which indicated good convergent validity. The score of pain and the functional limitation domain reported a significant difference with age (p < 0.021) and employment status (p < 0.034). The Urdu version of COMDQ is an accurate, valid, and reliable instrument that can be used to assess the OHRQoL in patients with chronic oral mucosal diseases in Pakistani and other Urdu-speaking populations of different age groups.

Microleakage Assessment of Different Preparation Techniques and Pit and Fissure Sealants in Permanent Molars.

BACKGROUND: This study aimed to evaluate the predisposition of microleakage in permanent molar teeth following different preparation techniques for pits and fissure sealants. METHODS: In this cross-sectional analytical study, a dye penetration method was employed to evaluate microleakage in dental restorations. A total of 104 extracted molars were randomly assigned into two groups and further subdivided into two subgroups based on a class of sealant (filled/unfilled resin) containing 26 teeth each. Teeth in one group were prepared by a conventional method using pumice and acid etching with 37% phosphoric acid, and teeth in the other group were prepared with a 1/4-round carbide bur in a low-speed handpiece and then acid etched. In each group, 26 teeth were sealed with a filled sealant, and 26 teeth with an unfilled sealant. The chi-square test was used for the comparison of microleakage between the groups. RESULTS: Unfilled sealants prepared with bur preparation showed the lowest degree of microleakage. The greater number of teeth (17) showed no microleakage in the group of teeth prepared using the bur preparation technique. Furthermore, in dye penetration analysis, the subgroup of teeth that were filled with unfilled sealants showed a greater number of teeth (57.6%), with zero penetration, and the dye penetration scores were statistically significant among the groups with different preparation techniques (p=0.002). CONCLUSION: Teeth whose pits and fissures were prepared through 1/4 carbide bur and filled with unfilled pits and fissure sealants show less microleakage than those prepared with the conventional method and filled with filled sealants. Therefore, the choice of surface preparation technique for pit and fissure sealants can influence the effectiveness of the sealant in preventing microleakage.

The Impact of COVID-19 Pandemic on the Psychological Health and Dental Practice of Oral Healthcare Workers: A Scoping Review.

This study aims to identify the impact of the COVID-19 pandemic on the psychological health and dental practice of oral health-care workers (OHCWs). The search for relevant literature was carried out online using PubMed, Web of science, and science direct databases from January 2020 to February 2021. Those articles were included that provided complete information about the impact of the COVID-19 pandemic on oral health-care workers during covid-19 and were original articles and reviews. Those articles were excluded from the current study that was not in English Language and involved case reports/book chapters/short communications. Finally, only 8 articles were selected for the scoping review considering that complete information regarding the provision of dental care in the time of COVID-19 was provided. Increased psychological distress (especially those with existing comorbidities) was noted among the OHCWs during this pandemic. They had enough knowledge about COVID-19 and showed concern regarding the future of dentistry. Either complete or partial closure of dental clinics had introduced financial constraints among them. However, the majority of them did not switch their profession. The institutions were not prepared for any such situation and no training was conducted to control the spread of COVID-19 infection. OHCWs are fully aware of the knowledge regarding COVID-19 and showed concerns for dentistry and dental health-care workers during this pandemic. Complete or partial closure of dental clinics has had adverse effects on the future of dentistry, economically as well as psychologically. Institutions need to upgrade and strengthen their systems to cater to any such situation efficiently. Proper counseling sessions should be conducted for the OHCWs to monitor, identify and treat the cases found.

Evaluating a linkage between obesity and the occurrence of dental caries among school going children in Sakaka, Al Jouf, Kingdom of Saudi Arabia.

Background: Obesity and dental caries are global public health problems. There are conflicting reports about the relationship between caries and obesity. The aim of this study was to analyze the type of relationship between the dental caries and obesity among school children in Al-Jouf region of Saudi Arabia. Methods: This cross-sectional study was conducted among 400 participants aged 6 to 14 years. The study involved measuring caries (dmft/DMFT), assessing body mass index (BMI), and administering a self-completion questionnaire. An independent t-test, one-way ANOVA, and multivariate logistic regression analyses were performed. Results: Out of 400 participants, 380 agreed to participate in the study. Overall caries prevalence among the participants was 76.1% and mean DMFT and dmft values were 2.8 ± 1.0 and 3.7 ± 1.6. Among the factors associated with mean caries scores, relation between DMFT scores and frequency of consumption of sugar was statistically significant (F = 3.82,0.01). Regression models has identified children with increased BMI values has 3.2 times more risk of getting dental caries in permanent teeth (P = 0.001). Conclusion: There was a positive association between obesity and dental caries in school going Saudi Arabian children. Comprehensive multidisciplinary approach by health professionals is recommended for preventive public health issues related to caries and obesity in teenagers.

Validation and Reliability Testing of the Child Oral Impacts on Daily Performances (C-OIDP): Cross-Cultural Adaptation and Psychometric Properties in Pakistani School-Going Children.

Background: This study aimed to develop an Urdu version of Child-Oral Impact on Daily Performance (C-OIDP) and assess its reliability and validity for children's oral health-related quality of life (OHRQoL) assessment in Pakistan. Methods: A total of 200 school-going children aged 11−14 were recruited from two public schools. For the adaptation process, the original English version of C-OIDP was translated into Urdu, reviewed by an expert committee, back-translated into Urdu, and then reviewed again by the same expert committee and pilot tested on 10 children. A clinical examination was carried out to record dental and gingival status followed by a face-to-face interview to measure oral health-related quality of life in children using C-OIDP-U. Reliability, internal consistency, construct and discriminant validity were assessed. Results: The Cronbach's alpha for C-OIDP-U was 0.69, the mean C-OIDP-U score was 10.2 ± 8.1 and 77.3% of the children reported at least one oral impact. Eating (40.3%) and difficulty in cleaning mouth (38.7%) were the two most impacted daily performances. For construct validity, the associations were significant between the C-OIDP-U score and all subjective oral health measures (p < 0.001). For discriminant validity, a significant association was observed between the C-OIDP-U score and clinical oral variables, children with DMFT + dmft ≥ 1, Gingival index > 1 and having malocclusion reported a higher C-OIDP-U score when compared to their counterparts. Conclusion: This study showed that C-OIDP is a valid, reliable and efficient instrument of OHRQoL for use in Pakistani children.

Work-Related Musculoskeletal Disorders and Their Associated Risk Factors among Pakistani Dental Practitioners: A Cross-Sectional Study.

Background: Work-related musculoskeletal disorders (WMSDs) have a negative impact on quality of life, and dentists are at risk of WMSDs due to the nature of work being static, repetitious, and for a long duration. The study was aimed at measuring the prevalence and distribution of work-related musculoskeletal disorders and determining the risk factors associated with affliction among Pakistani dentists. Methods: An online cross-sectional survey was conducted using a validated questionnaire consisting of four sections. The first section had questions related to sociodemographic information, the second section had questions that assessed the intensity and frequency of musculoskeletal pain (MSP), third section questions were concerned with the effect of MSP on the respondents' daily life, while the last section contained questions on whether they perceived their work in the dental clinic as a cause of their pain. Chi-square and one-way ANOVA tests were used for the analysis of the data in SPSS-23. Results: A total of 600 completely filled questionnaires were received with a response rate of 76.4%, and about 87% of the dental practitioners had some sort of MSD. The intensity and frequency of WMSDs were statistically significant (p < 0.05) in association with all the sociodemographic characteristics. The lower back area was the most reported site of WMSD pain (51.3%) followed by the neck/upper back (21.3%) and shoulder (17.6%). The site of pain was statistically significant (p < 0.05) in association with all the sociodemographic characteristics except gender (p = 0.11). A majority of participants (95.4%) had sought medical treatment and taken sick leaves (70%) due to WMSDs pain during their life. Participants attributed a number of working years and working posture as the two main reasons behind WMSDs. Conclusion: Considering the high prevalence of WMSDs among dentists, preventive strategies that minimize the occurrence of WMSDs should be adopted by dental professionals. The impact of WMSDs can be reduced by maintaining good posture, taking breaks and rest in between work, doing regular exercise, and improving the work environment.

Teledentistry awareness, its usefulness, and challenges among dental professionals in Pakistan and Saudi Arabia.

Objectives: This study aims to describe the perception of dental professionals in Pakistan and Saudi Arabia (SA) towards the practice of teledentistry, its usefulness and challenges. Methods: A cross-sectional study was carried out among 190 dentists from January 2021 to April 2021. The participants were included in the study using snowball sampling method. A 26-item adopted questionnaire was distributed using different social media channels. Chi-square test was used for analysis. Results: Out of 190 participants, 46.3% were from Pakistan and 53.7% were from SA. The majority of participants in both countries agreed that teledentistry would enhance guidelines and advice (74.2%), improve peer-to-peer interaction (79.5%) and make patient's referrals more efficient (75.8%). For the usefulness, most participants agree that it is economical for the patients (61.1%), improves communication (74.7%), helps in educating the patients (86.3%), avoid unnecessary travel (76.8%), helps monitoring (71.6%), and benefits patients in remote areas (74.7%); however, more Pakistani participants perceived that time spent with the patient would increase compared to SA participants (p < 0.001) and a higher proportion of SA participants believe that it helps in communication and monitoring of patients (p < 0.001) than Pakistani participants. Regarding the challenges in the use of teledentistry, few participants think that it violates the patient's privacy (22.6%) or is difficult to use (14.7%) or have distrust towards the teledentistry equipment (24.2%). Conclusion: The results indicated a high awareness and a positive attitude towards teledentistry, and its adaptation in their dental practice in both countries. However, limited infrastructure, set-up cost, and information technology (IT) literacy are the main challenges in integrating teledentistry which can be overcome by strategic government initiatives, policies, and programs.

Physico-Mechanical Properties of Commercially Available Tissue Conditioner Modified with Synthesized Chitosan Oligosaccharide.

This study aims to compare the hardness, sorption and solubility of commercially available tissue conditioner [TC] modified with chitosan [CS] and synthesized chitosan oligosaccharide [COS] in antifungal concentration. COS was synthesized by acid hydrolysis and characterized by FTIR and XRD. Experimental materials were formulated by incorporating each per gram of TC powder with effective antifungal concentration of chitosan 1.02 mg (Group 1: TC-CS) and 0.51 mg COS (Group 2: TC-COS). A commercially available TC was used as control (Group 0: CTC). Shore A hardness test was performed according to ASTM D 2240-05 (2010) standards on samples stored in dry environment, distilled water (DW) and artificial saliva (AS) at 37 °C (n = 5 per group). Percent weight changes (n = 5 per group) after storage in DW and AS was used to record sorption and solubility. One-way Anova with post hoc Tukey's test was applied. FTIR and XRD confirmed low molecular weight and amorphous nature of COS. Experimental groups had higher Shore A hardness values; however, these changes were not significant. Greatest variations in durometer values (p ≤ 0.05) were observed during the first 24 h. Experimental groups had higher (p ≤ 0.05) percentage sorption and solubility. Samples stored in DW had significantly higher (p = 0.019) sorption, whereas material had higher (p = 0.005) solubility in AS. Mean solubility values in both immersion mediums was highest for Group 2, followed by group 1 and group 0. In addition, significant (p ≤ 0.05) increase in solubility upon aging was noted for each material. Experimental tissue conditioner had higher hardness, sorption and solubility. However, these changes are not substantial to interfere with their tissue healing property. Therefore, these materials may be considered and explored further as potential antimicrobial drug delivery agent for denture stomatitis patients.

Dimensional changes of commercial and novel polyvinyl siloxane impression materials following sodium hypochlorite disinfection.

BACKGROUND: Dental impressions are used to record anatomy of teeth and surrounding oral structures. Impression materials become contaminated with saliva and blood requiring disinfection, which may have negative impact on dimensional stability of materials. OBJECTIVE: Comparatively evaluate linear dimensional changes of synthesized Tetra-functional (dimethylsilyl) orthosilicate (TFDMOS) containing Polyvinylsiloxane (PVS) impressions following sodium hypochlorite disinfection. METHODS: Percentage dimensional changes of three commercial PVS (Elite HD Monophase, Extrude and Aquasil Ultra Monophase) and five experimental PVS impression materials were measured. Experimental material contained novel cross-linking agent (TFDMOS) and a non-ionic surfactant (Rhodasurf CET-2) that is Exp-A (without TFDMOS), Exp-B (with TFDMOS), Exp-C (TFDMOS+ 2% Rhodasurf CET-2), Exp-D (TFDMOS+ 2.5% Rhodasurf CET-2) Exp-E (TFDMOS+ 3% Rhodasurf CET-2). Samples were made using rectangular stainless-steel molds (40 × 10 × 3 mm3) and linear dimensional changes were measured using a calibrated travelling microscope at 10× magnification after immersion in distilled water (D.W) and 1% Sodium Hypochlorite solution at two different time intervals i.e., 30 min and 24 h. RESULTS: Samples immersed in 1% NaOCl showed significant (p < 0.05) dimensional changes after 30 min of immersion. Exp-E showed significantly greater dimensional changes than their control (Exp-A and Exp-B). In distilled water, there were no significant difference among the tested materials. Aquasil exhibited highest expansion (0.06%) in both solutions. At 24 h, among the commercial materials, Extrude had the greatest expansion followed by Aquasil and Elite in DW while Aquasil showed the greatest expansion followed by Extrude and Elite in NaOCl. CONCLUSION: Experimental PVS had linear dimensional changes within the ISO 4823; 2015 recommended range. However, extended immersion can negatively affect the linear dimensions.

Comparison of the Hardness of Novel Experimental Vinyl Poly Siloxane (VPS) Impression Materials with Commercially Available Ones.

PURPOSE: To determine the hardness and Young's moduli of both commercial and experimental vinyl poly siloxane (VPS). METHODS: The purpose of this study was to develop a medium-bodied experimental (Exp-I, II, III, IV, and V) VPS impression materials and to analyse their effects on hardness and Young's modulus and compare them with three commercial VPS materials (Aquasil, Elite, and Extrude) using Shore A hardness tester. Measurements were recorded after 1, 24, 72, and 168 hours of mixing. The results were analysed with one-way ANOVA and post hoc Tukey's test using the SPSS PASW statistical 22 software. RESULTS: Commercial and experimental vinyl polysiloxane exhibited higher Shore A hardness values with time (i.e., 1 hour after mixing, 24 hours after mixing, 72 hours after mixing, and 1 week after mixing). All Comml and Exp VPS demonstrated a significant increase (ANOVA, p < 0.05) in hardness at increasing time points. Generally, all commercial VPS exhibited significantly higher values for Shore A hardness compared to all Exp formulations. For commercial products, Elt M presented significantly highest values at all-time points followed by Aq M then Extr M. Exp-I was significantly harder than all other Exp VPS at all-time points. Young's modulus values were directly related to Shore A hardness; materials with higher Shore A hardness values had higher Young's moduli. CONCLUSION: Continued polymerisation of elastomeric impression materials results in increased hardness over time. Hardness, Young's moduli, and rigidity of the set commercial and experimental VPS materials were within the required limits. Shore A hardness and Young's moduli were directly proportional to each other, and commercial and experimental materials had enough rigidity to contain the stone during pouring.

Caries Risk Assessment Using the Caries Management by Risk Assessment (CAMBRA) Protocol among the General Population of Sakaka, Saudi Arabia-A Cross-Sectional Study.

Background: Caries risk assessment is a useful tool in caries prevention and management. Using a tool such as CAMBRA, every individual can be assessed according to his or her disease indicators, risk factors, and protective factors for the current and future caries. Aim: This study aimed to assess caries risk among the general population of Sakaka, Saudi Arabia using the CAMBRA protocol. Methods: This cross-sectional study was conducted at university dental clinics using a questionnaire that was formulated using the CAMBRA caries risk assessment tool; afterwards, all 160 participants were intra-orally examined to assess oral hygiene status and presence of disease. Independent t-tests, ANOVAs, and chi-square tests were performed for analysis. Results: The majority of participants had one or more disease indicators, with white spots and visible cavities (71.3%), and the most commonly present risk factor was visible heavy plaque on teeth (82.5%). The use of fluoridated toothpaste (92.5%) was the most common protective factor. The majority of participants (85%) were in the 'High' category of Caries risk assessment. The prevalence of high caries risk was significantly higher among the rural participants compared to the urban (p <0.05), and significantly fewer of those with a primary school education level or lower were in the high dental caries risk group compared to the other educational categories (p <0.001). Conclusion: The caries risk among the general population of Sakaka, Saudi Arabia, is high, with significant variation among age groups, education levels, and geographical locations.

Risk analysis of factors in clinical anxiety among undergraduate and postgraduate students in dentistry.

BACKGROUND: When anxiety is persistent among dental students, the consequence could be poor academic performance, ill health, lack of empathy, and exhaustion. OBJECTIVE: This study aimed to determine the level of anxiety along with anxiety-provoking factors among clinical dental students. METHODS: This study included dental undergraduate and postgraduate clinical students from a public university. A modified version of the self-administered Moss and McManus questionnaire, which consisted of 50 items, was utilized to evaluate the levels of anxiety. The results were analyzed using SPSS® version 24. The significance level was set at p < 0.05. RESULTS: Within 180 participants, 140 (77.77%) were undergraduate students, while 40 (22.22%) were postgraduate dental students. Overall, the top clinical anxiety-provoking factor included failure to pass the final examination, whereas the least clinical anxiety-provoking element was communicating with the opposite gender. Significant differences existed among male and female participants in the seven anxiety-provoking factors among the participants namely dealing with elderly patients, fail to pass finals, arresting post-extraction bleeding, patients asking difficult questions, fear of accidental pulp exposure, dealing with a child or non-cooperative patient, and fear of taking an incorrect impression. Postgraduate students showed lower anxiety scores in various clinical tasks as compared to undergraduate students. CONCLUSIONS: Postgraduate dental students share largely the same perspectives with undergraduate dental students on the clinical anxiety-provoking situations with slight variations. Being the future healthcare providers, dental students must learn techniques to help them manage their dental anxiety and fear as well as deal with anxiety related to treating patients.