Growth and setting of gas bubbles in a viscoelastic matrix imaged by X-ray microtomography: the evolution of cellular structures in fermenting wheat flour dough.

X-ray tomography is a relevant technique for the dynamic follow-up of gas bubbles in an opaque viscoelastic matrix, especially using image analysis. It has been applied here to pieces of fermenting wheat flour dough of various compositions, at two different voxel sizes (15 and 5 µm). The resulting evolution of the main cellular features shows that the creation of cellular structures follows two regimes that are defined by a characteristic time of connectivity, tc [30 and 80 min]: first (t ≤ tc), bubbles grow freely and then (t ≥ tc) they become connected since the percolation of the gas phase is limited by liquid films. During the first regime, bubbles can be tracked and the local strain rate can be measured. Its values (10(-4)-5 × 10(-4) s(-1)) are in agreement with those computed from dough viscosity and internal gas pressure, both of which depend on the composition. For higher porosity, P = 0.64 in our case, and thus occurring in the second regime, different cellular structures are obtained and XRT images show deformed gas cells that display complex shapes. The comparison of these images with confocal laser scanning microscopy images suggests the presence of liquid films that separate these cells. The dough can therefore be seen as a three-phase medium: viscoelastic matrix/gas cell/liquid phase. The contributions of the different levels of matter organization can be integrated by defining a capillary number (C = 0.1-1) that makes it possible to predict the macroscopic dough behavior.

Shape-memory starch for resorbable biomedical devices.

Shape-memory resorbable materials were obtained by extrusion-cooking of potato starch with 20% glycerol under usual conditions. They presented an efficient shape-memory with a high recovery ratio (Rr>90%). Their recovery could be triggered at 37°C in water. After water immersion at 37°C, the modulus decreased from 1GPa to 2.4MPa and remained almost constant over 21 days. Gamma-ray sterilization did not have a dramatic impact on their mechanical properties, despite a large decrease of molecular mass analyzed by asymmetrical flow field-flow fractionation coupled with multi-angle laser light scattering (AFFFF-MALLS). Samples implanted in a rat model exhibited normal tissue integration with a low inflammatory response. Thus, as previously investigated in the case of shape-memory synthetic polymers, natural starch, without chemical grafting, can now be considered for manufacturing innovative biodegradable devices for less-invasive surgery.