RESUMEN
In this paper, we examine the impact of the precursor's mixing temperature and mixing protocol on the crystal structure and morphological and optical properties of Cu2ZnSnS4 (CZTS) thin films. Four samples of CZTS thin films were synthesized with the sol-gel spin coating technique by previously mixing precursors at (a) 150 °C and (b) room temperature (RT), either (i) all at once or (ii) through sequential adding the individual chemicals 30 min apart. SEM-EDX, XRD, Raman and Visible spectroscopy analysis showed that sample 150°C-ST (chemicals mixed at the same time at 150 °C) fulfilled all the theoretical stoichiometric criteria (poor in Cu, rich in Zn) for the high-quality CZTS absorbers. The larger grain size (850 nm) and crystallite size (73.96 nm), lower strain (0.49×10-3) and band gap Eg=1.44eV which is closest to the Shockley-Queisser limit for single junction solar cells (1.34 eV).
RESUMEN
Metal-semiconductor (MS) junction between Mo and CdTe, which is one of the fundamental issues for CdTe based solar cell, has been investigated for films deposited on different substrates. XRD pattern of Mo/CdTe films on the polyimide (PI) substrate shows a strong preferential orientation of MoTe2 in (100) at 2θ = 29.44 degrees, which becomes less apparent as deposition time of CdTe increases. However, on soda lime glass (SLG) no such XRD reflection pattern is observed. Moreover, from EDX measurement, Mo-Te compound also identifies MoTe2 at Mo/CdTe interface on PI substrate, which is not present on SLG. Bulk carrier concentration of Mo/CdTe films on PI substrate for lower deposition time of CdTe is found 1.42 x 10(18) cm(-3), which is almost equal to MoTe2. Thereafter, it decreases as CdTe growth time increases. The type of unintentionally formed MoTe2 on PI substrate is found to be n-type in nature. Lattice constants of a = 6.5 Šfor CdTe and a = 3.52 Šfor MoTe2 are found from nanostructure study by TEM.