Study on energy evolution and fractal characteristics of sandstone with different fracture dip angles under uniaxial compression.

In order to investigate the failure modes and instability mechanism of fractured rock. Uniaxial compression tests were conducted on sandstone specimens with different dip angles. Based on rock energy dissipation theory and fractal theory, the energy evolution characteristics and fragmentation fractal characteristics in the process of deformation and failure of specimens were analyzed. The results show that the peak strength and elastic modulus of fractured rock mass are lower than those of intact samples, and both show an exponential increase with the increase of fracture dip angle. The energy evolution laws of different fracture specimens are roughly similar and can be classified into four stages based on the stress-strain curve: pressure-tight, elastic, plastic, and post-destructive. The total strain energy, elastic strain energy, and dissipated strain energy of the specimen at the peak stress point increased exponentially with crack inclination, and the dissipated strain energy and compressive strength conformed to a power function growth relationship. The distribution of the fragments after the failure of the fracture sample has fractal characteristics, and the fractal dimension increases with the increase of the fracture dip angle. In addition, the higher the compressive strength of the specimen, the greater the energy dissipation, the more serious the degree of fragmentation, and the greater the fractal dimension. The data fitting further shows that there is a power function relationship between the dissipated strain energy and the fractal dimension. The research results can provide a theoretical basis for the stability of rock mass engineering and structural deformation control.

Chinese Chronic Mucocutaneous Candidiasis: A Case Report Series.

Chronic Mucocutaneous Candidiasis (CMC) is a rare immunodeficiency disease characterized by chronic or recurrent superficial Candida infections on the skin, nail, and mucous membranes. Here, we present four Chinese patients with CMC who manifested oral mucosal leukoplakia and nail thickening during early childhood, all displaying fissured tongue lines. The causative pathogens isolated from their oral mucosa and nails were identified as C. albicans and C. parapsilosis through morphology and molecular sequencing. Notably, among the four patients, one presented with vitiligo, while another had hypothyroidism. We have also conducted a review of reported cases of CMC in China and worldwide over the last five years, highlighting potential approaches for diagnosis and treatment. The current molecular evidence in the literature suggests potential for the development of early diagnosis methods, such as screening genetic variables on STAT1 and STAT3. Additionally, potential treatment avenues, including gene-targeted analogues and GM-CSF analogues, could be explored in conjunction with traditional antifungal therapy.

Achieving Uniform Li Deposition and Suppressed Electrolyte Flammability in Li-Metal Batteries via Designing Localized High-Concentration Electrolytes.

The increasing need for energy storage devices with high energy density has led to significant interest in Li-metal batteries (LMBs). However, the use of commercial electrolytes in LMBs is problematic due to their flammability, inadequate performance at low temperatures, and tendency to promote the growth of lithium dendrites and other flaws. This study introduces a localized high-concentration electrolyte (LHCE) that addresses these issues by employing non-flammable electrolyte components and incorporating carefully designed additives to enhance flame retardancy and low-temperature performance. By incorporating additives to optimize the electrolyte, it is possible to attain inorganic-dominated solid electrolyte interphases on both the cathode and anode. This achievement results in a uniform deposition of lithium, as well as the suppression of electrolyte decomposition and cathode deterioration. Consequently, this LHCE achieve over 300 stable cycles for both LiNi0.9Mn0.05Co0.05O2||Li cells and LiCoO2||Li cells, as well as 50 cycles for LiNi0.8Mn0.1Co0.1O2 (NCM811||Li) pouch cells. Furthermore, NCM811||Li cells maintain 84% discharge capacity at -20 °C, in comparison to the capacity at room temperature. The utilization of this electrolyte presents novel perspectives for the safe implementation of LMBs.

Reduced cold tolerance of viral-infected leafhoppers attenuates viral persistent epidemics.

Most arthropod-borne viruses produce intermittent epidemics in infected plants. However, the underlying mechanisms of these epidemics are unclear. Here, we demonstrated that rice stripe mosaic virus (RSMV), a viral pathogen, significantly increases the mortality of its overwintering vector, the leafhopper species Recilia dorsalis. Cold-stress assays indicated that RSMV reduces the cold tolerance of leafhoppers, a process associated with the downregulation of leafhopper cuticular protein genes. An RSMV-derived small RNA (vsiR-t00355379) was found to facilitate the downregulation of a leafhopper endocuticle gene that is mainly expressed in the abdomen (named RdABD-5) and is conserved across dipteran species. The downregulation of RdABD-5 expression in R. dorsalis resulted in fewer and thinner endocuticle lamellae, leading to decreased cold tolerance. This effect was correlated with a reduced incidence rate of RSMV in early-planted rice plants. These findings contribute to our understanding of the mechanism by which viral pathogens reduce cold tolerance in arthropod vectors and suggest an approach to managing the fluctuating prevalence of arboviruses. IMPORTANCE: Increasing arthropod vector dispersal rates have increased the susceptibility of crop to epidemic viral diseases. However, the incidence of some viral diseases fluctuates annually. In this study, we demonstrated that a rice virus reduces the cold tolerance of its leafhopper vector, Recilia dorsalis. This effect is linked to the virus-derived small RNA-mediated downregulation of a gene encoding a leafhopper abdominal endocuticle protein. Consequently, the altered structural composition of the abdominal endocuticle reduces the overwinter survival of leafhoppers, resulting in a lower incidence of RSMV infection in early-planted rice plants. Our findings illustrate the important roles of RNA interference in virus-vector insect-environment interactions and help explain the annual fluctuations of viral disease epidemics in rice fields.

Rapid room-temperature phosphorescence chiral recognition of natural amino acids.

Chiral recognition of amino acids is very important in both chemical and life sciences. Although chiral recognition with luminescence has many advantages such as being inexpensive, it is usually slow and lacks generality as the recognition module relies on structural complementarity. Here, we show that one single molecular-solid sensor, L-phenylalanine derived benzamide, can manifest the structural difference between the natural, left-handed amino acid and its right-handed counterpart via the difference of room-temperature phosphorescence (RTP) irrespective of the specific chemical structure. To realize rapid and reliable sensing, the doped samples are obtained as nanocrystals from evaporation of the tetrahydrofuran solutions, which allows for efficient triplet-triplet energy transfer to the chiral analytes generated in situ from chiral amino acids. The results show that L-analytes induce strong RTP, whereas the unnatural D-analytes produce barely any afterglow. The method expands the scope of luminescence chiral sensing by lessening the requirement for specific molecular structures.

[Cochlear implantation through retro-facial approach with congenital microtia malformation with facial nerve deformity: a case report].

The difficulty of cochlear implantation in patients with congenital microtia is usually increased due to the vague anatomical marks and facial nerve malformation. The common types of facial nerve malformation include facial nerve bony cover loss, aberrant position, and bifurcation malformation. Bifurcation malformation may obscure the oval window, press against stapes, and bifurcate in the vestibular window while obscuring the round window. It is important to correctly identify the facial nerve and choose a reasonable surgical approach to avoid postoperative complications. This article describes a case of profound sensorineural hearing loss due to facial nerve malformation in our institution. The patient underwent cochlear implantation through the retro-facial approach. There was no facial nerve injury or dysfunction symptoms such as facial paralysis and hemifacial spasm 2 years after the operation, and the cochlear implant works well. The score of the categories of the auditory performance（CAP） questionnaire was 7, and the score of the speech intelligibility rating（SIR） questionnaire was 4. When the round window cannot be exposed through the facial recess approach during surgery, the retro-facial approach is a feasible method. To avoid facial nerve injury, a thin-section CT of the temporal bone should be performed before the middle and inner ear surgery for patients with facial nerve malformation, and the intraoperative facial nerve monitor should be used to clarify the course of the facial nerve to avoid injury.

The Roles of Circular RNAs in Ischemic Stroke through Modulating Neuroinflammation.

Ischemic stroke (IS) remains a serious threat to human health. Neuroinflammatory response is an important pathophysiological process after IS. Circular RNAs (circRNAs), a member of the non-coding RNA family, are highly expressed in the central nervous system and widely involved in regulating physiological and pathophysiological processes. This study reviews the current evidence on neuroinflammatory responses, the role of circRNAs in IS and their potential mechanisms in regulating inflammatory cells, and inflammatory factors affecting IS damage. This review lays a foundation for future clinical application of circRNAs as novel biomarkers and therapeutic targets.

High-Pressure-Field Induced Synthesis of Ultrafine-Sized High-Entropy Compounds with Excellent Sodium-Ion Storage.

Emerging high entropy compounds (HECs) have attracted huge attention in electrochemical energy-related applications. The features of ultrafine size and carbon incorporation show great potential to boost the ion-storage kinetics of HECs. However, they are rarely reported because high-temperature calcination tends to result in larger crystallites, phase separation, and carbon reduction. Herein, using the NaCl self-assembly template method, by introducing a high-pressure field in the calcination process, the atom diffusion and phase separation are inhibited for the general formation of HECs, and the HEC aggregation is inhibited for obtaining ultrafine size. The general preparation of ultrafine-sized (< 10 nm) HECs (nitrides, oxides, sulfides, and phosphates) anchored on porous carbon composites is realized. They are demonstrated by combining advanced characterization technologies with theoretical computations. Ultrafine-sized high entropy sulfides-MnFeCoCuSnMo/porous carbon (HES-MnFeCoCuSnMo/PC) as representative anodes exhibit excellent sodium-ion storage kinetics and capacities (a high rating capacity of 278 mAh g-1 at 10 A g-1 for full cell and a high cycling capacity of 281 mAh g-1 at 20 A g-1 after 6000 cycles for half cell) due to the combining advantages of high entropy effect, ultrafine size, and PC incorporation. Our work provides a new opportunity for designing and fabricating ultrafine-sized HECs.

High Entropy Alloys Enable Durable and Efficient Lithium-Mediated CO2 Redox Reactions.

Designing electrocatalysts with high activity and durability for multistep reduction and oxidation reactions is challenging. High-entropy alloys (HEAs) are intriguing due to their tunable geometric and electronic structure through entropy effects. However, understanding the origin of their exceptional performance and identifying active centers is hindered by the diverse microenvironment in HEAs. Herein, NiFeCoCuRu HEAs designed with an average diameter of 2.17 nm, featuring different adsorption capacities for various reactants and intermediates in Li-mediated CO2 redox reactions, are introduced. The electronegativity-dependent nature of NiFeCoCuRu HEAs induces significant charge redistribution, shifting the d-band center closer to Fermi level and forming highly active clusters of Ru, Co, and Ni for Li-based compounds adsorptions. This lowers energy barriers and simultaneously stabilizes *LiCO2 and LiCO3+CO intermediates, enhancing the efficiency of both CO2 reduction and Li2CO3 decomposition over extended periods. This work provides insights into specific active site interactions with intermediates, highlighting the potential of HEAs as promising catalysts for intricate CO2 redox reactions.

Machine learning based peri-surgical risk calculator for abdominal related emergency general surgery: a multicenter retrospective study.

BACKGROUND: Currently, there is a lack of ideal risk prediction tools in the field of emergency general surgery (EGS). The American Association for the Surgery of Trauma recommends developing risk assessment tools specifically for EGS-related diseases. In this study, we sought to utilize machine learning (ML) algorithms to explore and develop a web-based calculator for predicting five perioperative risk events of eight common operations in EGS. METHOD: This study focused on patients with EGS and utilized electronic medical record systems to obtain data retrospectively from five centers in China. Five ML algorithms, including Random Forest (RF), Support Vector Machine, Naive Bayes, XGBoost, and Logistic Regression, were employed to construct predictive models for postoperative mortality, pneumonia, surgical site infection, thrombosis, and mechanical ventilation >48 h. The optimal models for each outcome event were determined based on metrics, including the value of the Area Under the Curve, F1 score, and sensitivity. A comparative analysis was conducted between the optimal models and Emergency Surgery Score (ESS), Acute Physiology and Chronic Health Evaluation II (APACHE II) score, and American Society of Anesthesiologists (ASA) classification. A web-based calculator was developed to determine corresponding risk probabilities. RESULT: Based on 10,993 patients with EGS, we determined the optimal RF model. The RF model also exhibited strong predictive performance compared with the ESS, APACHE II score, and ASA classification. Using this optimal model, we developed an online calculator with a questionnaire-guided interactive interface, catering to both the preoperative and postoperative application scenarios. CONCLUSIONS: We successfully developed an ML-based calculator for predicting the risk of postoperative adverse events in patients with EGS. This calculator accurately predicted the occurrence risk of five outcome events, providing quantified risk probabilities for clinical diagnosis and treatment.

Prognosis of LSPD versus TIPS for the treatment of esophagogastric variceal bleeding in cirrhosis.

BACKGROUND: This study aimed to compare postoperative complications in patients with esophagogastric variceal bleeding (EVB) who underwent laparoscopic splenectomy combined with pericardial devascularization (LSPD) versus transjugular intrahepatic portosystemic shunt (TIPS) procedures. METHODS: A retrospective collection of medical records was conducted from January 2014 to May 2020 at Union Hospital, Tongji Medical College, Huazhong University of Science and Technology. The study included patients from the departments of trauma surgery, interventional radiology, and general surgery who were diagnosed with EVB caused by portal hypertension and treated with LSPD or TIPS. Follow-up data were obtained to assess the occurrence of postoperative complications in both groups. RESULTS: A total of 201 patients were included in the study, with 104 cases in the LSPD group and 97 cases in the TIPS group. There was no significant difference in the 1-year and 3-year post-surgery survival rates between the TIPS and LSPD groups (P = 0.669, 0.066). The 3-year survival rate of Child-Pugh B patients in the LSPD group was higher than TIPS group (P = 0.041). The LSPD group also had a significantly higher rate of freedom from rebleeding at 3-year post-surgery compared to the TIPS group (P = 0.038). Stratified analysis showed no statistically significant difference in the rebleeding rate between the two groups. Furthermore, the LSPD group had a higher rate of freedom from overt hepatic encephalopathy at 1-year and 3-year post-surgery compared to the TIPS group (P = 0.007, < 0.001). The LSPD group also had a lower rate of severe complications at 3-year post-surgery compared to the TIPS group (P = 0.020). CONCLUSION: Compared to TIPS, LSPD does not increase the risk of mortality and rebleeding, while demonstrating fewer complications. In patients classified as Child-Pugh A and B, the use of LSPD for treating EVB is both safe and effective.

The microbiome dynamics and interaction of endosymbiotic Symbiodiniaceae and fungi are associated with thermal bleaching susceptibility of coral holobionts.

The thermal bleaching percentage of coral holobionts shows interspecific differences under heat-stress conditions, which are closely related to the coral-associated microbiome. However, the ecological effects of community dynamics and interactions between Symbiodiniaceae and fungi on coral thermal bleaching susceptibility remain unclear. In this study, we analyzed the diversity, community structure, functions, and potential interaction of Symbiodiniaceae and fungi among 18 coral species from a high thermal bleaching risk atoll using next-generation sequencing. The results showed that heat-tolerant C3u sub-clade and Durusdinium dominated the Symbiodiniaceae community of corals and that there were no core amplicon sequence variants in the coral-associated fungal community. Fungal richness and the abundance of confirmed functional animal-plant pathogens were significantly positively correlated with the coral thermal bleaching percentage. Fungal indicators, including Didymellaceae, Chaetomiaceae, Schizophyllum, and Colletotrichum, were identified in corals. Each coral species had a complex Symbiodiniaceae-fungi interaction network (SFIN), which was driven by the dominant Symbiodiniaceae sub-clades. The SFINs of coral holobionts with low thermal bleaching susceptibility exhibited low complexity and high betweenness centrality. These results indicate that the extra heat tolerance of coral in Huangyan Island may be linked to the high abundance of heat-tolerant Symbiodiniaceae. Fungal communities have high interspecific flexibility, and the increase of fungal diversity and pathogen abundance was correlated with higher thermal bleaching susceptibility of corals. Moreover, fungal indicators were associated with the degrees of coral thermal bleaching susceptibility, including both high and intermediate levels. The topological properties of SFINs suggest that heat-tolerant coral have limited fungal parasitism and strong microbial network resilience.IMPORTANCEGlobal warming and enhanced marine heatwaves have led to a rapid decline in coral reef ecosystems worldwide. Several studies have focused on the impact of coral-associated microbiomes on thermal bleaching susceptibility in corals; however, the ecological functions and interactions between Symbiodiniaceae and fungi remain unclear. We investigated the microbiome dynamics and potential interactions of Symbiodiniaceae and fungi among 18 coral species in Huangyan Island. Our study found that the Symbiodiniaceae community of corals was mainly composed of heat-tolerant C3u sub-clade and Durusdinium. The increase in fungal diversity and pathogen abundance has close associations with higher coral thermal bleaching susceptibility. We first constructed an interaction network between Symbiodiniaceae and fungi in corals, which indicated that restricting fungal parasitism and strong interaction network resilience would promote heat acclimatization of corals. Accordingly, this study provides insights into the role of microorganisms and their interaction as drivers of interspecific differences in coral thermal bleaching.

Xiashengella succiniciproducens gen. nov., sp. nov., a succinate-producing bacterium isolated from an anaerobic digestion tank in the family Marinilabiliaceae of the order Bacteroidales.

A strictly anaerobic, motile bacterium, designated as strain Ai-910T, was isolated from the sludge of an anaerobic digestion tank in China. Cells were Gram-stain-negative rods. Optimal growth was observed at 38 °C (growth range 25-42 °C), pH 8.5 (growth range 5.5-10.5), and under a NaCl concentration of 0.06% (w/v) (range 0-2.0%). Major cellular fatty acids were iso-C15 : 0 and anteiso-C15 : 0. The respiratory quinone was MK-7. Using xylose as the growth substrate, succinate was produced as the fermentation product. Phylogenetic analysis based on the 16 S rRNA gene sequences indicated that strain Ai-910T formed a distinct phylogenetic lineage that reflects a new genus in the family Marinilabiliaceae, sharing high similarities to Alkaliflexus imshenetskii Z-7010T (92.78%), Alkalitalea saponilacus SC/BZ-SP2T (92.51%), and Geofilum rubicundum JAM-BA0501T (92.36%). Genomic similarity (average nucleotide identity and digital DNA-DNA hybridization) values between strain Ai-910T and its phylogenetic neighbors were below 65.27 and 16.90%, respectively, indicating that strain Ai-910T represented a novel species. The average amino acid identity between strain Ai-910T and other related members of the family Marinilabiliaceae were below 69.41%, supporting that strain Ai-910T was a member of a new genus within the family Marinilabiliaceae. Phylogenetic, genomic, and phenotypic analysis revealed that strain Ai-910T was distinguished from other phylogenetic relatives within the family Marinilabiliaceae. The genome size was 3.10 Mbp, and the DNA G + C content of the isolate was 42.8 mol%. Collectively, differences of the phenotypic and phylogenetic features of strain Ai-910T from its close relatives suggest that strain Ai-910T represented a novel species in a new genus of the family Marinilabiliaceae, for which the name Xiashengella succiniciproducens gen. nov., sp. nov. was proposed. The type strain of Xiashengella succiniciproducens is Ai-910T (= CGMCC 1.17893T = KCTC 25,304T).

IL-13 facilitates ferroptotic death in asthmatic epithelial cells via SOCS1-mediated ubiquitinated degradation of SLC7A11.

Th2-high asthma is characterized by elevated levels of type 2 cytokines, such as interleukin 13 (IL-13), and its prevalence has been increasing worldwide. Ferroptosis, a recently discovered type of programmed cell death, is involved in the pathological process of Th2-high asthma; however, the underlying mechanisms remain incompletely understood. In this study, we demonstrated that the serum level of malondialdehyde (MDA), an index of lipid peroxidation, positively correlated with IL-13 level and negatively correlated with the predicted forced expiratory volume in 1 s (FEV1%) in asthmatics. Furthermore, we showed that IL-13 facilitates ferroptosis by upregulating of suppressor of cytokine signaling 1 (SOCS1) through analyzing immortalized airway epithelial cells, human airway organoids, and the ovalbumin (OVA)-challenged asthma model. We identified that signal transducer and activator of transcription 6 (STAT6) promotes the transcription of SOCS1 upon IL-13 stimulation. Moreover, SOCS1, an E3 ubiquitin ligase, was found to bind to solute carrier family 7 member 11 (SLC7A11) and catalyze its ubiquitinated degradation, thereby promoting ferroptosis in airway epithelial cells. Last, we found that inhibiting SOCS1 can decrease ferroptosis in airway epithelial cells and alleviate airway hyperresponsiveness (AHR) in OVA-challenged wide-type mice, while SOCS1 overexpression exacerbated the above in OVA-challenged IL-13-knockout mice. Our findings reveal that the IL-13/STAT6/SOCS1/SLC7A11 pathway is a novel molecular mechanism for ferroptosis in Th2-high asthma, confirming that targeting ferroptosis in airway epithelial cells is a potential therapeutic strategy for Th2-high asthma.

Regulating Metal Centers of MOF-74 Promotes PEO-Based Electrolytes for All-Solid-State Lithium-Metal Batteries.

Poly(ethylene oxide) (PEO)-based electrolytes have been extensively studied for all-solid-state lithium-metal batteries due to their excellent film-forming capabilities and low cost. However, the limited ionic conductivity and poor mechanical strength of the PEO-based electrolytes cannot prevent the growth of undesirable lithium dendrites, leading to the failure of batteries. Metal-organic frameworks (MOFs) are functional materials with a periodic porous structure that can improve the electrochemical performance of PEO-based electrolytes. However, the enhancement effect of MOFs with different metal centers and the interaction mechanism with PEO remain unclear. Herein, MOF-74s with Cu or Ni centers are prepared and used as fillers of PEO-based electrolytes. Adding 15 wt % of Cu-MOF-74 to the PEO-based electrolyte (15%Cu-MOF/P-Li) effectively improves the ionic conductivity, lithium transference number, and mechanical strength of the PEO-based electrolyte simultaneously. Furthermore, the ordered pore channels of Cu-MOF-74 provide uniform Li-ion transport pathways, facilitating homogeneous Li+ deposition. As a result, the lithium symmetric cell with 15%Cu-MOF/P-Li shows stable cycles for 1080 h at 0.1 mA cm-2 and 0.1 mAh cm-2, and the Li | 15% Cu-MOF/P-Li | LFP full cell exhibits a long cycle life up to 200 cycles at 60 °C and 0.5 C, with a capacity retention rate of 89.7%.

Tonal language experience facilitates the use of spatial cues for segregating competing speech in bimodal cochlear implant listeners.

English-speaking bimodal and bilateral cochlear implant (CI) users can segregate competing speech using talker sex cues but not spatial cues. While tonal language experience allows for greater utilization of talker sex cues for listeners with normal hearing, tonal language benefits remain unclear for CI users. The present study assessed the ability of Mandarin-speaking bilateral and bimodal CI users to recognize target sentences amidst speech maskers that varied in terms of spatial cues and/or talker sex cues, relative to the target. Different from English-speaking CI users, Mandarin-speaking CI users exhibited greater utilization of spatial cues, particularly in bimodal listening.

Molecular Mechanisms of circRNA-miRNA-mRNA Interactions in the Regulation of Goose Liver Development.

The liver, a crucial metabolic organ in animals, is responsible for the synthesis, breakdown, and transport of lipids. However, the regulatory mechanisms involving both coding and noncoding RNAs that oversee the development of the goose liver remain elusive. This study aimed to fill this knowledge gap by conducting RNA-seq to profile the expression of circular RNAs (circRNAs) and microRNAs (miRNAs) during goose liver development. We analyzed circRNAs in liver samples from Sichuan white geese at three developmental stages: posthatching day 0, 10 weeks (fast growth stage), and 30 weeks (sexual maturation stage). Our findings revealed 11,079 circRNAs and 994 miRNAs, among which the differentially expressed circRNAs and miRNAs were significantly enriched in pathways such as fatty acid biosynthesis, degradation, and metabolism. Further analysis of the target genes of the differentially expressed miRNAs revealed enrichment in pathways related to fatty acid biosynthesis, metabolism, PPAR signaling, DNA replication, and the cell cycle. We also established circRNA-miRNA-mRNA regulatory networks, identifying key regulatory factors and miRNAs. In conclusion, our study offers valuable insights into the complex interplay of circRNA-miRNA-mRNA interactions during goose liver development, and illuminates the molecular pathways that regulate this vital life function.

Deciphering the contributing motifs of reconstructed cobalt (II) sulfides catalysts in Li-CO2 batteries.

Developing highly efficient catalysts is significant for Li-CO2 batteries. However, understanding the exact structure of catalysts during battery operation remains a challenge, which hampers knowledge-driven optimization. Here we use X-ray absorption spectroscopy to probe the reconstruction of CoSx (x = 8/9, 1.097, and 2) pre-catalysts and identify the local geometric ligand environment of cobalt during cycling in the Li-CO2 batteries. We find that different oxidized states after reconstruction are decisive to battery performance. Specifically, complete oxidation on CoS1.097 and Co9S8 leads to electrochemical performance deterioration, while oxidation on CoS2 terminates with Co-S4-O2 motifs, leading to improved activity. Density functional theory calculations show that partial oxidation contributes to charge redistributions on cobalt and thus facilitates the catalytic ability. Together, the spectroscopic and electrochemical results provide valuable insight into the structural evolution during cycling and the structure-activity relationship in the electrocatalyst study of Li-CO2 batteries.

The discrepancy in timing between synchronous signals and visual stimulation should not be underestimated.

Response latency is a critical parameter in studying human behavior, representing the time interval between the onset of stimulus and the response. However, different time between devices can introduce errors. Serial port synchronization signal can mitigate this, but limited information is available regarding their accuracy. Optical signals offer another option, but the difference in the positioning of optical signals and visual stimuli can introduce errors, and there have been limited reports of error reduction. This study aims to investigate methods for reducing the time errors. We used the Psychtoolbox to generate visual stimuli and serial port synchronization signals to explore their accuracy. Subsequently, we proposed a calibration formula to minimize the error between optical signals and visual stimuli. The findings are as follows: Firstly, the serial port synchronization signal presenting precedes visual stimulation, with a smaller lead time observed at higher refresh rates. Secondly, the lead time increases as the stimulus position deviates to the right and downwards. In Linux and IOPort(), serial port synchronization signals exhibited greater accuracy. Considering the poor accuracy and the multiple influencing factors associated with serial port synchronization signals, it is recommended to use optical signals to complete time synchronization. The results indicate that under the darkening process, the time error is - 0.23 ~ 0.08 ms (mean). This calibration formula can help measure the response latency accurately. This study provides valuable insights for optimizing experimental design and improving the accuracy of response latency. Although it only involves visual stimuli, the methods and results of this study can still serve as a reference.

Process Optimization of SiC-Reinforced Aluminum Matrix Composites Prepared Using Laser Powder Bed Fusion and the Effect of Particle Morphology on Performance.

Process parameters and powder spreading quality are important factors for aluminum matrix composites (AMCs) prepared using laser powder bed fusion (LPBF). In this study, a Box-Behnken Design (BBD) was used to optimize the process parameters, and near-spherical ß-SiC was selected to improve the quality of powder spreading. The rationality of parameter optimization was verified by testing the density of samples prepared using different laser power levels. Al4C3 diffraction peaks were found in XRD patterns, which indicated that interface reactions occurred to form good interface bonding between the Al matrix and the SiC particles. The tensile strength and plasticity of LPBF α-SiC/AlSi10Mg were lower than that of LPBF AlSi10Mg, which was mainly due to the poor fluidity of the powder mixtures and powder spreading quality. For LPBF ß-SiC/AlSi10Mg, the tensile strength increased and elongation decreased slightly compared to LPBF α-SiC/AlSi10Mg. The data in this study were compared with the data in other studies. In this study, LPBF AlSi10Mg and LPBF ß-SiC/AlSi10Mg not only showed the inherent high strength of their LPBF parts, but also had relatively high plasticity. Matching between strength and plasticity was mainly dependent on the scanning strategy. Most studies use uni-directional or bi-directional scanning strategies with a certain rotation angle between layers. A chessboard scanning strategy was used in this study to form a coarse remelted connected skeleton inside the material and significantly improve plasticity. This study lays a theoretical and experimental foundation for the controllable preparation of SiC-reinforced AMCs using LPBF.