Symmetry-breaking of Dibenzo[b,d]thiophene Sulfone Enhancing Polaron Generation for Boosted Photocatalytic Hydrogen Evolution.

The current bottleneck in the development of efficient photocatalysts for hydrogen evolution is the limited availability of high-performance acceptor units. Over the past nine years, dibenzo[b,d]thiophene sulfone (DBS) has been the preferred choice for the acceptor unit. Despite extensive exploration of alternative structures as potential replacements for DBS, a superior substitute remains elusive. In this study, a symmetry-breaking strategy was employed on DBS to develop a novel acceptor unit, BBTT-1SO. The asymmetric structure of BBTT-1SO proved beneficial for increasing multiple moment and polarizability. BBTT-1SO-containing polymers showed higher efficiencies for hydrogen evolution than their DBS-containing counterparts by up to 166%. PBBTT-1SO exhibited an excellent hydrogen evolution rate (HER) of 222.03 mmol g-1 h-1 and an apparent quantum yield of 27.5% at 500 nm. Transient spectroscopic studies indicated that the BBTT-1SO-based polymers facilitated electron polaron formation, which explains their superior HERs. PBBTT-1SO also showed 14% higher HER in natural seawater splitting than that in deionized water splitting. Molecular dynamics simulations highlighted the enhanced water-PBBTT-1SO polymer interactions in salt-containing solutions. This study presents a pioneering example of a substitute acceptor unit for DBS in the construction of high-performance photocatalysts for hydrogen evolution.

Overcrowded 14,14'-Bidibenzo[a,j]anthracenes: Challenges in Syntheses and Atypical Property of Lacking Symmetry-Breaking Charge Transfer (SBCT).

14,14'-Bidibenzo[a,j]anthracenes (BDBAs) were prepared by iridium-catalyzed annulation of 5,5'-biterphenylene with alkynes. Overcrowded BDBAs with highly distorted molecular halves and a small interplanar angle between two anthryl moieties (down to approximately 31º, currently the lowest reported value) were verified by X-ray crystallography. The strong intramolecular interactions and electronic couplingsbetween two molecular halves resulted in upfield 1H NMR signals, redshifted absorption and emission bands, and a reduced HOMO-LUMO gap. Photodynamic investigations on BDBAs indicated that the formation of the conventional symmetry-breaking charge transfer (SBCT) state was suspended by restricted rocking around the central C-C bond. Such a mechanism associated with this highly constrained conformation was examined for the first time.

Singlet Fission in a New Series of Systematically Designed Through-space Coupled Tetracene Oligomers.

Singlet fission (SF) holds great promise for current photovoltaic technologies, where tetracenes, with their relatively high triplet energies, play a major role for application in silicon-based solar cells. However, the SF efficiencies in tetracene dimers are low due to the unfavorable energetics of their singlet and triplet energy levels. In the solid state, tetracene exhibits high yields of triplet formation through SF, raising great interest about the underlying mechanisms. To address this discrepancy, we designed and prepared a novel molecular system based on a hexaphenylbenzene core decorated with 2 to 6 tetracene chromophores. The spatial arrangement of tetracene units, induced by steric hindrance in the central part, dictates through-space coupling, making it a relevant model for solid-state chromophore organization. We then revealed a remarkable increase in SF quantum yield with the number of tetracenes, reaching quantitative (196 %) triplet pair formation in hexamer. We observed a short-lived correlated triplet pair and limited magnetic effects, indicating ineffective triplet dissociation in these through-space coupled systems. These findings emphasize the crucial role of the number of chromophores involved and the interchromophore arrangement for the SF efficiency. The insights gained from this study will aid designing more efficient and technology-compatible SF systems for applications in photovoltaics.

Overcoming small-bandgap charge recombination in visible and NIR-light-driven hydrogen evolution by engineering the polymer photocatalyst structure.

Designing an organic polymer photocatalyst for efficient hydrogen evolution with visible and near-infrared (NIR) light activity is still a major challenge. Unlike the common behavior of gradually increasing the charge recombination while shrinking the bandgap, we present here a series of polymer nanoparticles (Pdots) based on ITIC and BTIC units with different π-linkers between the acceptor-donor-acceptor (A-D-A) repeated moieties of the polymer. These polymers act as an efficient single polymer photocatalyst for H2 evolution under both visible and NIR light, without combining or hybridizing with other materials. Importantly, the difluorothiophene (ThF) π-linker facilitates the charge transfer between acceptors of different repeated moieties (A-D-A-(π-Linker)-A-D-A), leading to the enhancement of charge separation between D and A. As a result, the PITIC-ThF Pdots exhibit superior hydrogen evolution rates of 279 µmol/h and 20.5 µmol/h with visible (>420 nm) and NIR (>780 nm) light irradiation, respectively. Furthermore, PITIC-ThF Pdots exhibit a promising apparent quantum yield (AQY) at 700 nm (4.76%).

Performance and Solution Structures of Side-Chain-Bridged Oligo (Ethylene Glycol) Polymer Photocatalysts for Enhanced Hydrogen Evolution under Natural Light Illumination.

Converting solar energy into hydrogen energy using conjugated polymers (CP) is a promising solution to the energy crisis. Improving water solubility plays one of the critical factors in enhancing the hydrogen evolution rate (HER) of CP photocatalysts. In this study, a novel concept of incorporating hydrophilic side chains to connect the backbones of CPs to improve their HER is proposed. This concept is realized through the polymerization of carbazole units bridged with octane, ethylene glycol, and penta-(ethylene glycol) to form three new side-chain-braided (SCB) CPs: PCz2S-OCt, PCz2S-EG, and PCz2S-PEG. Verified through transient absorption spectra, the enhanced capability of PCz2S-PEG for ultrafast electron transfer and reduced recombination effects has been demonstrated. Small- and wide-angle X-ray scattering (SAXS/WAXS) analyses reveal that these three SCB-CPs form cross-linking networks with different mass fractal dimensions (f) in aqueous solution. With the lowest f value of 2.64 and improved water/polymer interfaces, PCz2S-PEG demonstrates the best HER, reaching up to 126.9 µmol h-1 in pure water-based photocatalytic solution. Moreover, PCz2S-PEG exhibits comparable performance in seawater-based photocatalytic solution under natural sunlight. In situ SAXS analysis further reveals nucleation-dominated generation of hydrogen nanoclusters with a size of ≈1.5 nm in the HER of PCz2S-PEG under light illumination.

A New Series of Sandwich-Type 5,5'-Biterphenylenes: Synthetic Challenge, Structural Uniqueness and Photodynamics.

A new series of biaryls, bi-linear-terphenylenes (BLTPs), were prepared using the tert-butyllithium-mediated cyclization as the key synthetic step. The three-dimensional structures of the studied compounds were verified using X-ray crystallography and DFT calculations. Tetraaryl(ethynyl)-substituted BLTPs are highly crowded molecules, and the internal rotation around the central C-C bond is restricted due to a high barrier (>50 kcal/mol). These structures contain several aryl/terphenylenyl/aryl sandwiches, where the through-space π-π (TSPP) interactions are strongly reflected in the shielding of 1 H NMR chemical shifts, reduction of oxidation potentials, increasing aromaticity of the central six-membered ring and decreasing antiaromaticity of the four-membered rings in a terphenylenyl moiety based on NICS(0) and iso-chemical shielding surfaces. Despite the restricted C-C bond associated intramolecular TSPP interactions for BLTPs in the ground state, to our surprise, the electronic coupling between two linear terphenylenes (LTPs) in BLTPs in the excited state is weak, so that the excited-state behavior is dominated by the corresponding monomeric LTPs. In other words, all BLTPs undergo ultrafast relaxation dynamics via strong exciton-vibration coupling, acting as a blue-light absorber with essentially no emission.

Highly Efficient MAPbI3 -Based Quantum Dots Exhibiting Unusual Nonblinking Single Photon Emission at Room Temperature.

Highly emissive semiconductor nanocrystals, or so-called quantum dots (QDs) possess a variety of applications from displays and biology labeling, to quantum communication and modern security. Though ensembles of QDs have already shown very high photoluminescent quantum yields (PLQYs) and have been widely utilized in current optoelectronic products, QDs that exhibit high absorption cross-section, high emission intensity, and, most important, nonblinking behavior at single-dot level have long been desired and not yet realized at room temperature. In this work, infrared-emissive MAPbI3 -based halide perovskite QDs is demonstrated. These QDs not only show a ≈100% PLQY at the ensemble level but also, surprisingly, at the single-dot level, display an extra-large absorption cross-section up to 1.80 × 10-12 cm2 and non-blinking single photon emission with a high single photon purity of 95.3%, a unique property that is extremely rare among all types of quantum emitters operated at room temperature. An in-depth analysis indicates that neither trion formation nor band-edge carrier trapping is observed in MAPbI3 QDs, resulting in the suppression of intensity blinking and lifetime blinking. Fluence-dependent transient absorption measurements reveal that the coexistence of non-blinking behavior and high single photon purity in these perovskite QDs results from a significant repulsive exciton-exciton interaction, which suppresses the formation of biexciton, and thus greatly reduces photocharging. The robustness of these QDs is confirmed by their excellent stability under continuous 1 h electron irradiation in high-resolution transmission electron microscope inspection. It is believed that these results mark an important milestone in realizing nonblinking single photon emission in semiconductor QDs.

Distinct evolution of ST11 KL64 Klebsiella pneumoniae in Taiwan.

Carbapenem-resistant ST11_KL64 Klebsiella pneumoniae emerged as a significant public health concern in Taiwan, peaking between 2013 and 2015, with the majority of isolates exhibiting OXA-48 as the sole carbapenemase. In this study, we employed whole-genome sequencing to investigate the molecular underpinnings of ST11_KL64 isolates collected from 2013 to 2021. Phylogenomic analysis revealed a notable genetic divergence between the ST11_KL64 strains in Taiwan and those in China, suggesting an independent evolutionary trajectory. Our findings indicated that the ST11_KL64_Taiwan lineage originated from the ST11_KL64 lineage in Brazil, with recombination events leading to the integration of ICEKp11 and a 27-kb fragment at the tRNAASN sites, shaping its unique genomic landscape. To further elucidate this unique sublineage, we examined the plasmid contents. In contrast to ST11_KL64_Brazil strains, which predominantly carried blaKPC-2, ST11_KL64_Taiwan strains exhibited the acquisition of an epidemic blaOXA-48-carrying IncL plasmid. Additionally, ST11_KL64_Taiwan strains consistently harbored a multi-drug resistance IncC plasmid, along with a collection of gene clusters that conferred resistance to heavy metals and the phage shock protein system via various Inc-type plasmids. Although few, there were still rare ST11_KL64_Taiwan strains that have evolved into hypervirulent CRKP through the horizontal acquisition of pLVPK variants. Comprehensive characterization of the high-risk ST11_KL64 lineage in Taiwan not only sheds light on its epidemic success but also provides essential data for ongoing surveillance efforts aimed at tracking the spread and evolution of ST11_KL64 across different geographical regions. Understanding the molecular underpinnings of CRKP evolution is crucial for developing effective strategies to combat its emergence and dissemination.

Correcting modification-mediated errors in nanopore sequencing by nucleotide demodification and reference-based correction.

The accuracy of Oxford Nanopore Technology (ONT) sequencing has significantly improved thanks to new flowcells, sequencing kits, and basecalling algorithms. However, novel modification types untrained in the basecalling models can seriously reduce the quality. Here we reports a set of ONT-sequenced genomes with unexpected low quality due to novel modification types. Demodification by whole-genome amplification significantly improved the quality but lost the epigenome. We also developed a reference-based method, Modpolish, for correcting modification-mediated errors while retaining the epigenome when a sufficient number of closely-related genomes is publicly available (default: top 20 genomes with at least 95% identity). Modpolish not only significantly improved the quality of in-house sequenced genomes but also public datasets sequenced by R9.4 and R10.4 (simplex). Our results suggested that novel modifications are prone to ONT systematic errors. Nevertheless, these errors are correctable by nucleotide demodification or Modpolish without prior knowledge of modifications.

Establishment and Modification of Ninety-seven Pneumococcal Serotyping Assays Based on Quantitative Real-time Polymerase Chain Reaction.

Objective: To establish and modify quantitative real-time polymerase chain reaction (qPCR)-based serotyping assays to distinguish 97 pneumococcal serotypes. Methods: A database of capsular polysaccharide ( cps) loci sequences was generated, covering 97 pneumococcal serotypes. Bioinformatics analyses were performed to identify the cps loci structure and target genes related to different pneumococcal serotypes with specific SNPs. A total of 27 novel qPCR serotyping assay primers and probes were established based on qPCR, while 27 recombinant plasmids containing serotype-specific DNA sequence fragments were constructed as reference target sequences to examine the specificity and sensitivity of the qPCR assay. A panel of pneumococcal reference strains was employed to evaluate the capability of pneumococcal serotyping. Results: A total of 97 pneumococcal serotyping assays based on qPCR were established and modified, which included 64 serotypes previously reported as well as an additional 33 serotypes. Twenty-seven novel qPCR serotyping target sequences were implemented in the pneumococcal qPCR serotyping system. A total of 97 pneumococcal serotypes, which included 52 individual serotypes and 45 serotypes belonging to 20 serogroups, could not be identified as individual serotypes. The sensitivity of qPCR assays based on 27 target sequences was 1-100 copies/µL. The specificity of the qPCR assays was 100%, which were tested by a panel of 90 serotypes of the pneumococcal reference strains. Conclusion: A total of 27 novel qPCR assays were established and modified to analyze 97 pneumococcal serotypes.

Carbapenem resistance in extensively drug-resistant Salmonella enterica serovar Agona and AmpC ß-lactamase-producing S. Infantis.

IMPORTANCE: Carbapenem resistance arising from the loss of porins is commonly observed in extended-spectrum ß-lactamase (ESBL) and AmpC ß-lactamase-producing strains of certain Enterobacteriaceae genera, including Klebsiella pneumoniae, Escherichia coli, and Pseudomonas aeruginosa. However, this resistance mechanism is rarely reported in the Salmonella genus. To address this knowledge gap, our study offers genetic evidence demonstrating that the loss of two specific porins (OmpC_378 and OmpD) is crucial for the development of carbapenem resistance in Salmonella ESBL and AmpC ß-lactamase-producing strains. Furthermore, our findings reveal that most Salmonella serovars carry seven porin parathologs, with OmpC_378 and OmpD being the key porins involved in the development of carbapenem resistance in Salmonella strains.

Serpin E1 mediates the induction of renal tubular degeneration and premature senescence upon diabetic insult.

As a leading cause of chronic kidney disease, diabetic kidney disease (DKD) involves insidious but progressive impairments of renal tubules, and is associated with premature renal aging. The underlying pathomechanisms remain elusive. Post hoc analyses of the publicly-available renal transcriptome revealed that TGFß1 is overexpressed in renal tubulointerstitia in patients with DKD and positively correlated with kidney aging signaling. This finding was validated in kidney biopsy specimens collected from patients with DKD, associated with renal tubular senescence and degenerative changes. In vitro in renal tubular epithelial cells, exposure to a diabetic milieu, stimulated with high ambient glucose and TGFß1, elicited premature senescence, as evidenced by staining for senescence-associated ß-galactosidase activity and increased expression of p16INK4A, and p53. This coincided with Serpin E1 induction, in parallel with increased fibronectin accumulation and reduced expression of the epithelial marker E-cadherin, all indicative of degenerative changes. Reminiscent of the action of typical senolytics, a small molecule inhibitor of Serpin E1 substantially mitigated the pro-senescent and degenerating effects of the diabetic milieu, suggesting an essential role of Serpin E1 in mediating renal tubular senescence upon diabetic insult. Moreover, inhibition of Serpin E1 abolished the diabetic insult-triggered paracrine senescence of renal tubular cells. In consistency, in patients with DKD, renal tubular expression of Serpin E1 was upregulated and positively correlated with tubular senescence and fibrosis in renal tubulointerstitia. Collectively, diabetic insult induces renal tubular degeneration and premature senescence via, at least in part, Serpin E1 signaling.

Semi-Transparent, Pixel-Free Upconversion Goggles with Dual Audio-Visual Communication.

The intractable brittleness and opacity of the crystalline semiconductor restrict the prospect of developing low-cost imaging systems. Here, infrared visualization technologies are established with large-area, semi-transparent organic upconversion devices that bring high-resolution invisible images into sight without photolithography. To exploit all photoinduced charge carriers, a monolithic device structure is proposed built on the infrared-selective, single-component charge generation layer of chloroaluminum phthalocyanine (ClAlPc) coupled to two visible light-emitting layers manipulated with unipolar charges. Transient pump-probe spectroscopy reveals that the ClAlPc-based device exhibits an efficient charge dissociation process under forward bias. This process is indicated by the prompt and strong features of electroabsorption screening. Furthermore, by imposing the electric field, the ultrafast excited state dynamic suggests a prolonged charge carrier lifetime from the ClAlPc, which facilitates the charge utilization for upconversion luminance. For the first time, >30% of the infrared photons are utilized without photomultiplication strategies owing to the trivial spectrum overlap between ClAlPc and the emitter. In addition, the device can broadcast the acoustic signal by synchronizing the device frequency with the light source, which enables to operate it in dual audio-visual mode. The work demonstrates the potential of upconversion devices for affordable infrared imaging in wearable electronics.

Epidemiological trends and antimicrobial resistance in Salmonella enterica serovar Typhimurium clones in Taiwan between 2004 and 2019.

OBJECTIVES: We investigated the temporal trends of Salmonella enterica serovar Typhimurium (S. Typhimurium) clones in Taiwan from 2004 to 2019, focusing on antimicrobial resistance (AMR), resistance genetic determinants, and plasmid types. METHODS: Salmonella isolates were characterized using pulsed-field gel electrophoresis (PFGE), whole-genome sequencing, and antimicrobial susceptibility testing. Clones were defined using PFGE clustering and the hierarchical cgMLST clustering (HierCC) assignments. RESULTS: Seven major S. Typhimurium clones, HC100_2, 13, 41, 305, 310, 501, and 46261, accounted for 97.6% (8079/8275) of human isolates in Taiwan. Each clone displayed a unique AMR profile, resistance genetic determinants, and plasmid types. Four highly resistant clones (HC100_2, 41, 305, and 310) exhibited multiple resistance in 86.5% to 96.1% of isolates. HC100_305 and HC100_2 were pandemic multidrug-resistant clones, characterized by resistance to ampicillin, chloramphenicol, streptomycin, sulfonamides, and tetracycline (ACSSuT) and ASSuT, respectively. The prevalence of the ACSSuT clone decreased from 68.7% of S. Typhimurium isolates in 2004 to 1.7% in 2019, while the ASSuT clone emerged in 2007 and became the largest clone after 2010. Several plasmids, including IncHI2-IncHI2A, IncC, IncFIB(K), and IncI1-1(α), carried multiple resistance genes or were associated with the carriage of mph(A), blaCMY-2, and blaDHA-1. CONCLUSIONS: Between 2004 and 2019, Taiwan experienced the emergence, prevalence, and subsequent decline of several highly resistant S. Typhimurium clones. The clones defined using the HierCC approach have global comparability. The increasing resistance to third-generation cephalosporins, cephamycins, ciprofloxacin, and azithromycin in recent years poses a significant medical concern.

Self-Assembled Monolayers of Bi-Functionalized Porphyrins: A Novel Class of Hole-Layer-Coordinating Perovskites and Indium Tin Oxide in Inverted Solar Cells.

Self-assembled monolayers (SAMs) offer the advantage of facile interfacial modification, leading to significant improvements in device performance. In this study, we report the design and synthesis of a new series of carboxylic acid-functionalized porphyrin derivatives, namely AC-1, AC-3, and AC-5, and present, for the first time, a strategy to exploit the large π-moiety of porphyrins as a backbone for interfacing the indium tin oxide (ITO) electrode and perovskite active layer in an inverted perovskite solar cell (PSC) configuration. The electron-rich nature of porphyrins facilitates hole transfer and the formation of SAMs, resulting in a dense surface that minimizes defects. Comprehensive spectroscopic and dynamic studies demonstrate that the double-anchored AC-3 and AC-5 enhance SAMs on ITO, passivate the perovskite layer, and function as conduits to facilitate hole transfer, thus significantly boosting the performance of PSCs. The champion inverted PSC employing AC-5 SAM achieves an impressive solar efficiency of 23.19 % with a high fill factor of 84.05 %. This work presents a novel molecular engineering strategy for functionalizing SAMs to tune the energy levels, molecular dipoles, packing orientations to achieve stable and efficient solar performance. Importantly, our comprehensive investigation has unraveled the associated mechanisms, offering valuable insights for future advancements in PSCs.

Synthesis, structural analysis, and properties of highly twisted alkenes 13,13'-bis(dibenzo[a,i]fluorenylidene) and its derivatives.

The rotation of a C = C bond in an alkene can be efficiently accelerated by creating the high-strain ground state and stabilizing the transition state of the process. Herein, the synthesis, structures, and properties of several highly twisted alkenes are comprehensively explored. A facile and practical synthetic approach to target molecules is developed. The twist angles and lengths of the central C = C bonds in these molecules are 36-58° and 1.40-1.43 Å, respectively, and confirmed by X-ray crystallography and DFT calculations. A quasi-planar molecular half with the π-extended substituents delivers a shallow rotational barrier (down to 2.35 kcal/mol), indicating that the rotation of the C = C bond is as facile as that of the aryl-aryl bond in 2-flourobiphenyl. Other versatile and unique properties of the studied compounds include a broad photoabsorption range (from 250 up to 1100 nm), a reduced HOMO-LUMO gap (1.26-1.68 eV), and a small singlet-triplet energy gap (3.65-5.68 kcal/mol).

Electronic Preresonance Stimulated Raman Scattering Spectromicroscopy Using Multiple-Plate Continuum.

Stimulated Raman scattering (SRS) spectromicroscopy is a powerful technique that enables label-free detection of chemical bonds with high specificity. However, the low Raman cross section due to typical far-electronic resonance excitation seriously restricts the sensitivity and undermines its application to bio-imaging. To address this bottleneck, the electronic preresonance (EPR) SRS technique has been developed to enhance the Raman signals by shifting the excitation frequency toward the molecular absorption. A fundamental weakness of the previous demonstration is the lack of dual-wavelength tunability, making EPR-SRS only applicable to a limited number of species in the proof-of-concept experiment. Here, we demonstrate the EPR-SRS spectromicroscopy using a multiple-plate continuum (MPC) light source able to examine a single vibration mode with independently adjustable pump and Stokes wavelengths. In our experiments, the C═C vibration mode of Alexa 635 is interrogated by continuously scanning the pump-to-absorption frequency detuning throughout the entire EPR region enabled by MPC. The results exhibit 150-fold SRS signal enhancement and good agreement with the Albrecht A-term preresonance model. Signal enhancement is also observed in EPR-SRS images of the whole Drosophila brain stained with Alexa 635. With the improved sensitivity and potential to implement hyperspectral measurement, we envision that MPC-EPR-SRS spectromicroscopy can bring the Raman techniques closer to a routine in bio-imaging.

Chromosome-Borne CTX-M-65 Extended-Spectrum ß-Lactamase-Producing Salmonella enterica Serovar Infantis, Taiwan.

A CTX-M-65‒producing Salmonella enterica serovar Infantis clone, probably originating in Latin America and initially reported in the United States, has emerged in Taiwan. Chicken meat is the most likely primary carrier. Four of the 9 drug resistance genes have integrated into the chromosome: blaCTX-M-65, tet(A), sul1, and aadA1.