Visualization of the Charging of Water Droplets Sprayed into Air.

Water droplets are spraying into air using air as a nebulizing gas, and the droplets pass between two parallel metal plates with opposite charges. A high-speed camera records droplet trajectories in the uniform electric field, providing visual evidence for the Lenard effect, that is, smaller droplets are negatively charged whereas larger droplets are positively charged. By analyzing the velocities of the droplets between the metal plates, the charges on the droplets can be estimated. Some key observations include: (1) localized electric fields with intensities on the order of 109 V/m are generated, and charges are expected to jump (micro-lightening) between a positively charged larger droplet and the negatively charged smaller droplet as they separate; (2) the strength of the electric field is sufficiently powerful to ionize gases surrounding the droplets; and (3) observations in an open-air mass spectrometer reveal the presence of ions such as N2+, O2+, NO+, and NO2+. These findings provide new insight into the origins of some atmospheric ions and have implications for understanding ionization processes in the atmosphere and chemical transformations in water droplets, advancing knowledge in the field of aerosol science and water microdroplet chemistry.

In situ growth of BiOBr on copper foam conductive substrate with enhanced photocatalytic performance.

Photocatalysis technology based on solar-powered semiconductors is widely recognized as a promising approach for achieving eco-friendly, secure, and sustainable degradation of organic contaminants. Nevertheless, conventional photocatalysts exhibit drawbacks such as a wide bandgap, and rapid recombination of photoinduced electron/hole pairs, in addition to complicated separation and recovery procedures. In this research, we cultivated BiOBr in situ on the surface of copper foam to fabricate a functional photocatalyst (denoted as BiOBr/Cu foam), which was subsequently employed for the photodegradation of Methylene Blue. Based on photodegradation experiments, the 0.3 BiOBr/Cu foam demonstrates superior photocatalytic efficacy compared to other photocatalysts under solar light irradiation. Furthermore, its ease of separation from the solution enhances its potential for reuse. The analysis of charge transfer revealed that the copper foam functions as an effective electron scavenger within the BiOBr/Cu foam, thereby facilitating charge separation and the generation of photo-induced holes. This phenomenon contributes to a significantly enhanced production of hydroxyl radicals. This study provides a valuable perspective on the design and synthesis of photocatalysts with heightened practicality, employing a conductive substrate.

Continuous ammonia synthesis from water and nitrogen via contact electrification.

We synthesized ammonia (NH3) by bubbling nitrogen (N2) gas into bulk liquid water (200 mL) containing 50 mg polytetrafluoroethylene (PTFE) particles (~5 µm in diameter) suspended with the help of a surfactant (Tween 20, ~0.05 vol.%) at room temperature (25 °C). Electron spin resonance spectroscopy and density functional theory calculations reveal that water acts as the proton donor for the reduction of N2. Moreover, isotopic labeling of the N2 gas shows that it is the source of nitrogen in the ammonia. We propose a mechanism for ammonia generation based on the activation of N2 caused by electron transfer and reduction processes driven by contact electrification. We optimized the pH of the PTFE suspension at 6.5 to 7.0 and employed ultrasonic mixing. We found an ammonia production rate of ~420 µmol L-1 h-1 per gram of PTFE particles for the conditions described above. This rate did not change more than 10% over an 8-h period of sustained reaction.

Carboxyl graphene modified PEDOT:PSS organic electrochemical transistor for in situ detection of cancer cell morphology.

Circulating tumor cells in human peripheral blood play an important role in cancer metastasis. In addition to the size-based and antibody-based capture and separation of cancer cells, their electrical characterization is important for rare cell detection, which can prove fatal in point-of-care testing. Herein, an organic electrochemical transistor (OECT) biosensor made of solution-gated carboxyl graphene mixed with PEDOT:PSS for the detection of cancer cells in situ is reported. Carboxyl graphene was used in this work to modulate cancer cell morphology, which differs significantly from normal blood cells, to achieve rare cancer cell detection. When the concentration of carboxyl graphene mixed in PEDOT:PSS was increased from 0 to 5 mg mL-1, the cancer cell surface area increased from 218 µm2 to 530 µm2, respectively. A change in cell morphology was also detected by the OECT. Negative charges in the cancer cells induced a positive shift in gate voltage, which was approximately 40 mV for spherical-shaped cells. When the cell surface area increased, transfer curves of transistor revealed a negative shift in gate voltage. Therefore, the sensor can be used for in situ detection of cancer cell morphology during the cell capture process, which can be used to identify whether the captured cells are deformable.

Fabrication of PEDOT:PSS-based solution gated organic electrochemical transistor array for cancer cells detection.

Organic electrochemical transistor (OECT) was applied in chemical and biological sensing. In this work, we developed a simple and repeatable method to fabricate OECT array, which had been successfully used to detect cancer cells. PEDPT:PSS conductive film between source and drain electrodes were patterned through photolithography, which can achieve uniform devices with same electrical characterization. When MCF-7 cancer cells are captured on the PEDOT:PSS surface via specifical antibody, the transfer characteristic of OECT shifts to higher gate electrode voltage due to the electrostatic interaction between cancer cells and device. The effective gate voltage shift can reach about 63 mV when the concentration of cancer cells increased to 5000. The shift of effective gate voltage is related to the cancer cell morphology, which is increased in the first 1 h and decreased when the capture time was larger than 1 h. The device of OECT array can increase the sample flux and make the detection result more accurate. It is expected that OECT array will have promising practical applications in single cancer cell detection in the future.

Triggering photocatalytic performance of La2CoxMn2-xO6 via heat activation.

The La-based perovskite (LaBO3) exhibits excellent optical properties. However, its valence band (VB) potential is not sufficiently positive to reach the oxidation potential required for the cleavage of chemical bonds (such as benzylic C-H), limiting its application in photocatalysis. Herein, we report the unconventional effects of heat activation on the reduction of the dissociation energy of benzylic C-H and aqueous H-O, thereby triggering the photocatalytic activity of La2CoxMn2-xO6 perovskites. Additionally, we demonstrate that photocatalysis is the main contributor to substrate conversion in the selective oxidation of toluene and reduction of CO2. Particularly, La2Co1.5Mn0.5O6 shows excellent performance with a product yield of 550.00 mmol gcat-1 and a toluene conversion of 22,866.67 µmol gcat-1 h-1. To the best of our knowledge, this is the highest reported product yield for the selective oxidation of benzylic C-H bond of toluene. Our findings provide insight into the specific role of heat activation in photocatalysis, which is crucial for breaking and overcoming the VB barrier to realize challenging reactions.

Unexpected Dioxin Formation During Digestion of Soil with Oxidizing Acids.

Dioxins, such as polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs), are among the most toxic unintentionally produced persistent organic pollutants, and their emission is of great concern. Herein, we discovered abundant dioxin formation in soil and various organic carbon-containing matrices after digestion with aqua regia. Σ17PCDD/Fs concentrations were in the range of 66.6-142,834 pg/g dw (5.6-17,021 pg WHO2005-TEQ/g dw) in 19 soil samples after digestion with aqua regia for 6 h. Σ17PCDD/Fs concentration was significantly and positively correlated with soil organic carbon content (R2 = 0.89; p < 0.01). Compared with cellulose and lignin, humic acid served as an important organic matter component that was converted to PCDD/Fs during soil digestion. Strong oxidation and production of reactive chlorine by aqua regia may be the key factors in the formation of PCDD/Fs. The yearly emission of PCDD/Fs due to digestion with strong acids by the inspection and testing industry was estimated to be 83.8 g TEQ in China in 2021 based on the highest level, which was ∼0.9% of the total dioxin inventory in China. Great attention should be paid to unexpected dioxin formation during digestion processes considering the potential risk of release from laboratories and enterprises.

Contact between water vapor and silicate surface causes abiotic formation of reactive oxygen species in an anoxic atmosphere.

Spontaneous generation of reactive oxygen species (ROS) in aqueous microdroplets or at a water vapor-silicate interface is a new source of redox chemistry. However, such generation occurs with difficulty in liquid water having a large ionic strength. We report that ROS is spontaneously produced when water vapor contacts hydrogen-bonded hydroxyl groups on a silicate surface. The evolution of hydrogen-bonded species such as hydroxyl groups was investigated by using two-dimensional, time-resolved FT-IR spectroscopy. The participation of water vapor in ROS generation is confirmed by investigating the reaction of D2O vapor and hydroxyl groups on a silicate surface. We propose a reaction pathway for ROS generation based on the change of the hydrogen-bonding network and corresponding electron transfer onto the silicate surface in the water vapor-solid contact process. Our observations suggest that ROS production from water vapor-silicate contact electrification could have contributed to oxidation during the Archean Eon before the Great Oxidation Event.

Development of a Completely New PFOS Alternative with Lower Surface Tension for Minimizing the Environmental Burden.

Improving the technical performance of related industrial products is an efficient strategy to reducing the application quantities and environmental burden for toxic chemicals. A novel polyfluoroalkyl surfactant potassium 1,1,2,2,3,3,4,4-octafluoro-4-(perfluorobutoxy)butane-1-sulfonate(F404) was synthesized by a commercializable route. It had a surface tension(γ) of 18.2 mN/m at the critical micelle concentration(CMC, 1.04 g/L), significantly lower than that of perfluorooctane sulfonate(PFOS, ca. 33.0 mN/m, 0.72 g/L), and exhibited remarkable suppression of chromium-fog at a dose half that of PFOS. The half maximal inhibitory concentration(IC50) values in HepG2 cells and the lethal concentration of 50%(LC50) in zebrafish embryos after 72 hpf indicated a lower toxicity for F404 in comparison to PFOS. In a UV/sulphite system, 89.3% of F404 were decomposed after 3 h, representing a defluorination efficiency of 43%. The cleavage of the ether C-O bond during the decomposition would be expected to form a short chain·C4F9 as the position of the ether C-O in the F404 fluorocarbon chains is C4-O5. The ether unit is introduced in the perfluoroalkyl chain to improve water solubility, biocompatibility and degradation, thereby minimizing the environmental burden. Electronic Supplementary Material: Supplementary material is available in the online version of this article at 10.1007/s40242-023-3030-4.

Photothermal Localization in an Optofluidic Microreactor for Rapid Pretreatment toward Online Pollutant Analysis.

The realization of high-efficient digestion in a microfluidic reactor is considered to be advantageous for pretreatment toward online pollutant detection. However, it is difficult to achieve satisfactory device performance due to the gap between the low digestion reaction efficiency and the demand for rapid pretreatment for online detection. Herein, we design and manufacture an optofluidic microreactor combined with a MnO2 nanofilm localizing the heat inside the reaction chamber under solar irradiation, which contributes a lot to the on-chip nutrient digestion efficiency enhancement. The overall temperature of the water sample in the reactor chamber can be dramatically increased in a fleeting time of less than 1 s and maintained at 78 °C. The digestion rate constant of the microreactor is improved by about 100 times compared with that obtained by the traditional method in the national standard, which is attributed to temperature enhancement and various oxidation reactions in the heated reaction chamber. Notably, when pretreating the actual total phosphorus water samples, the digestion efficiency is demonstrated to be higher than 95% within 12 s under solar light irradiation. The optofluidic platform brings many benefits to accelerate the various photochemically enhanced reactions using solar light and is extremely adapted for rapid pretreatment of biochemical samples to further develop their online analysis.

Water-solid contact electrification causes hydrogen peroxide production from hydroxyl radical recombination in sprayed microdroplets.

Contact electrification between water and a solid surface is crucial for physicochemical processes at water-solid interfaces. However, the nature of the involved processes remains poorly understood, especially in the initial stage of the interface formation. Here we report that H2O2 is spontaneously produced from the hydroxyl groups on the solid surface when contact occurred. The density of hydroxyl groups affects the H2O2 yield. The participation of hydroxyl groups in H2O2 generation is confirmed by mass spectrometric detection of 18O in the product of the reaction between 4-carboxyphenylboronic acid and 18O-labeled H2O2 resulting from 18O2 plasma treatment of the surface. We propose a model for H2O2 generation based on recombination of the hydroxyl radicals produced from the surface hydroxyl groups in the water-solid contact process. Our observations show that the spontaneous generation of H2O2 is universal on the surfaces of soil and atmospheric fine particles in a humid environment.

Electric field-assisted MnO2 nanomaterials for rapid capture and in situ delivery of circulating tumour cells.

The heterogeneity of cancer has become a major obstacle to treatment, and the development of an efficient, fast, and accurate drug delivery system is even more urgent. In this work, we designed a device that integrated multiple functions of cell capture, in situ manipulation, and non-destructive release on a single device. With an applied electric field, an intelligent device based on MnO2 nanomaterials was used to realize efficient and rapid capture of cancer cells in both patients' blood and artificial blood samples. This device could capture cancer cells with high efficiency (up to about 93%) and strong specificity in blood samples, the capture time was nearly 50 min faster than that of natural sedimentation, and reduce the effects on cells caused by long-time in vitro culture. In addition, Mn3+ on the surface of the MnO2 substrate was reduced to Mn2+ by an electrochemical method, partial dissolution occurred, and then the captured cells were non-destructively released with rapid speed (about 8 s) and high efficiency (about 94 ± 2%). For in situ regulation, upon applying a pulse electric field, the captured cells were perforated nondestructively, and extracellular molecules could be delivered to the captured cells with well-performed dose and temporal controls. As a proof-of-concept application, we proved that the device could capture circulating tumor cells in peripheral blood faster and achieve in situ drug delivery. Finally, it can also quickly release circulating tumour cells for subsequent analysis, highlighting its accuracy, due to which it is widely used in medical treatment, basic tumor research and drug development.

Incidence of Voice Disorders among Private School Teachers in Taiwan: A Nationwide Longitudinal Study.

Background: Teachers are more likely to use a loud voice at work than the general working population, but few longitudinal studies have been conducted on their risk of voice disorders. The occurrence of voice disorders in private school teachers was assessed by using the Longitudinal Health Insurance Database 2000 of Taiwan, which contains information on a random sample of 1 million beneficiaries of National Health Insurance. Methods: This study included private school teachers who were under 35 years old and newly employed between 2000 and 2010, and used workers with other occupations as the comparison cohort. Patients with voice disorders were identified using diagnostic codes on insurance claims. Cox proportional hazards regressions were applied to obtain relative risk estimates. Results: After adjusting for age, sex, income, and comorbidities of sinusitis and laryngitis, private school teachers had a higher risk of developing voice disorders (hazard ratio [HR] = 1.58; 95% confidence intervals: 1.43-1.75). In addition, the finding that elementary and high-school teachers had a higher risk than college teachers (HR: 2.56 vs. 1.44) and the pattern of increases in cumulative incidence over time supported a dose-response relationship between teaching and voice disorders. Conclusions: Private school teachers had higher risks of voice disorders. The results support the causality between occupation and voice disorders in teachers.

Tailoring the Energy Band Structure and Interfacial Morphology of the ETL via Controllable Nanocluster Size Achieves High-Performance Planar Perovskite Solar Cells.

Planar-type perovskite solar cells (p-PSCs) based on SnO2 have garnered further attention due to their simple and low-temperature fabrication. Improving the critical properties of the electron transport layer (ETL) is an effective way to enhance the performance of p-PSC devices. Here, a brand-new method is developed to relieve the contact recombination caused by the rough fluorine-doped tin oxide (FTO) surface and further boosts the electrical concentration of the ETL. A SnO2-ethylene diamine tetraacetic acid (EDTA) acylamide compound (SEAC) with hydrogen bond-induced adjustable cluster size is reported for the first time. The rational choice of the SEAC cluster size is the key for obtaining the smooth interfacial morphology of the ETL on the rugged FTO substrate. In addition, the energy band gap decreases with the increasing cluster size, and consequently, results in improved electrical conductivity of the SEAC. The upshifted Fermi energy level leads to higher electron concentration, which is an important physical quantity of the ETL. The PSC devices based on the optimized SEAC achieve an improved power conversion efficiency of 21.29% with negligible J-V hysteresis due to significantly enhanced electron transport and reduced contact charge recombination at the ETL/perovskite interface. In general, this paper comes up with a unique strategy to improve the quality of the SnO2-based ETL.

Enhanced adsorption-based atmospheric water harvesting using a photothermal cotton rod for freshwater production in cold climates.

Solar energy-powered adsorption-based atmospheric water harvesting (ABAWH) is an emerging technology for freshwater production, especially in water-scarce regions that are remote and landlocked. Numerous water adsorbents have been used in ABAWH devices to convert molecule to liquid water. However, it is still challenging to harvest water from the air in cold winter, owing to the water adsorption of sorbents decreasing significantly at low temperature. Herein, we designed and fabricated an ABAWH device by integrating composited ionic liquids (CILs) with carbon nanotubes (CNTs) photothermal materials on the surface of cotton rod fibers. CILs extract water from the air. CNTs enable light-to-heat conversion and drive the solar evaporation process. Importantly, the cotton rods offer a backbone porous structure to maintain its internal temperature at 20 °C under solar irradiation, and thus promote the water adsorption performance of CILs at low environmental temperature. Freshwater is successfully harvested under environment temperature of 6 °C, 30% RH and solar irradiation intensity of 0.6 kW m-2. The water yield can achieve 1.49 kg per m2 per day in an outdoor environment. We believe that the ABAWH device offers a promising approach to effectively harvest water from the air at low temperature and humidity conditions.

Electrophoretic Deposited Black Phosphorus on 3D Porous Current Collectors to Regulate Li Nucleation for Dendrite-Free Lithium Metal Anodes.

Li metal is considered a highly desirable anode for next-generation high-energy-density rechargeable lithium batteries. However, irregular Li dendrite formation and infinite relative volume changes prevent the commercial adoption of Li-metal anodes. Here, electrophoretic deposition of black phosphorus (BP) on commercial Cu foam (BP@Cu foam) is reported to regulate Li nucleation for the first time. First-principles calculations reveal that the unique two-dimensional (2D) structure of BP is beneficial to Li intercalation and propagation. Compared with the random Li nucleation and growth on bare Cu foam, Li ions are preferably confined into the BP layers, which induces uniform Li nucleation at the early stage of the Li deposition and guides the following lateral Li growth on BP@Cu foam. In addition, the three-dimensional (3D) porous and conductive framework of Cu foams further mitigate the volume change and dissipate the current density. Attributing to these merits, the BP@Cu foam exhibits significantly enhanced Coulombic efficiency and cycling stability compared with bare Cu foam. In the full-cell configuration paired with a Li4Ti5O12 or LiFePO4 cathode, the BP@Cu foam also boosts the battery performances. This work provides new insights into the development of BP and other elaborate 2D materials for achieving dendrite-free Li-metal anodes.

Scattered Light Imaging Enables Real-Time Monitoring of Label-Free Nanoparticles and Fluorescent Biomolecules in Live Cells.

Simultaneously monitoring label-free nanoparticles (NPs) and fluorescent biomolecules inside the live cell in real time is challenging because both imaging methods require different instrumentation and measuring principles. Here we report a novel scattered light imaging (SLi) technique that allows label-free NPs to be monitored using a conventional confocal microscope. The method shows a high spatial resolution and can distinguish label-free silver nanoparticles (AgNPs) with a 10 nm size difference in live cells. We performed SLi to observe the uptake, movement, distribution, and transformation of AgNPs in live cells at a single-particle level. The method is applicable to accurately track the localization of a variety of nanomaterials inside the cell. With this approach, label-free NP and fluorescent-labeled biomolecules are imaged simultaneously making it possible to real-time monitor nanobio interactions.

Respiratory symptoms among search and rescue workers who responded to the 2016 Taiwan earthquake.

OBJECTIVES: High respiratory hazards among search and rescue workers (SRWs) emerged after the World Trade Center attacks on 11 September 2001. There have been limited studies on respiratory symptoms among earthquake SRWs. We investigated the respiratory symptoms and the use of respiratory protective equipment among the SRWs who responded to the 2016 Taiwan earthquake. METHODS: On 6 February 2016, a 6.4-magnitude earthquake struck southern Taiwan and caused 513 injuries and 117 deaths. During the 9-day field operation, 519 firefighters affiliated with the Tainan City Government Fire Bureau participated in the search and rescue response. A standardised, self-completed questionnaire was used to collect data on demographics, dust exposures, personal protective measures and health outcomes 3 weeks after the earthquake. Descriptive and multivariate analyses adjusting for demographics and exposure variables were performed for new or worsened outcomes. RESULTS: Of the 519 SRWs, 414 (80%) responded to the questionnaire. Of these SRWs, 153 (37%) reported new or worsened respiratory symptoms, with cough (23%) as the leading symptom, followed by rhinorrhoea or nasal congestion (22%) and chest tightness (6%). More than 90% of the symptoms persisted to the third week after the earthquake. The prevalence of new or worsened respiratory symptoms was significantly higher among SRWs with a higher level of exposure to dust. Prior training in response to respiratory pollutants was only 5%. CONCLUSIONS: There were significant respiratory hazards among earthquake SRWs. The persistent symptoms and low coverage of training warrant further regular examination and occupational health programmes.