Probing Particle-Carbon/Binder Degradation Behavior in Fatigued Layered Cathode Materials through Machine Learning Aided Diffraction Tomography.

Understanding how reaction heterogeneity impacts cathode materials during Li-ion battery (LIB) electrochemical cycling is pivotal for unraveling their electrochemical performance. Yet, experimentally verifying these reactions has proven to be a challenge. To address this, we employed scanning µ-XRD computed tomography to scrutinize Ni-rich layered LiNi0.6Co0.2Mn0.2O2 (NCM622) and Li-rich layered Li[Li0.2Ni0.2Mn0.6]O2 (LLNMO). By harnessing machine learning (ML) techniques, we scrutinized an extensive dataset of µ-XRD patterns, about 100,000 patterns per slice, to unveil the spatial distribution of crystalline structure and microstrain. Our experimental findings unequivocally reveal the distinct behavior of these materials. NCM622 exhibits structural degradation and lattice strain intricately linked to the size of secondary particles. Smaller particles and the surface of larger particles in contact with the carbon/binder matrix experience intensified structural fatigue after long-term cycling. Conversely, both the surface and bulk of LLNMO particles endure severe strain-induced structural degradation during high-voltage cycling, resulting in significant voltage decay and capacity fade. This work holds the potential to fine-tune the microstructure of advanced layered materials and manipulate composite electrode construction in order to enhance the performance of LIBs and beyond.

Microwave-assisted synthesis of Co-free Li[Li0.2Ni0.2Mn0.6]O2 cathodes with a spinel-layered coherent structure for high-power Li-ion batteries.

Li- and Mn-rich layered oxides (LMLOs) are regarded as the most promising cathode materials for Li-ion batteries (LIBs), but they suffer from poor rate capability. Herein, a promising and practical method (i.e. a hydroxide coprecipitation method in combination with a microwave heating process) is developed to controllably synthesize cobalt-free Li[Li0.2Ni0.2Mn0.6]O2 with a layered/spinel heterostructure (LLNMO-LS). The cathode made of the LLNMO-LS delivers an excellent electrochemical performance, demonstrating a discharge capacity of 147 mA h g-1 at 10C.

Accumulated Lattice Strain as an Intrinsic Trigger for the First-Cycle Voltage Decay in Li-Rich 3d Layered Oxides.

Li- and Mn-rich layered oxides (LMLOs) are promising cathode materials for Li-ion batteries (LIBs) owing to their high discharge capacity of above 250 mA h g-1. A high voltage plateau related to the oxidation of lattice oxygen appears upon the first charge, but it cannot be recovered during discharge, resulting in the so-called voltage decay. Disappearance of the honeycomb superstructure of the layered structure at a slow C-rate (e.g., 0.1 C) has been proposed to cause the first-cycle voltage decay. By comparing the structural evolution of Li[Li0.2Ni0.2Mn0.6]O2 (LLNMO) at various current densities, the operando synchrotron-based X-ray diffraction results show that the lattice strain in bulk LLNMO is continuously increased over cycling, resulting in the first-cycle voltage loss upon Li-ion insertion. Unlike the LLNMO, the accumulated average lattice strain of LiNi0.8Co0.1Mn0.1O2 (NCM811) and LiNi0.6Co0.2Mn0.2O2 (NCM622) from the open-circuit voltage to 4.8 V could be released on discharge. These findings help to gain a deep understanding of the voltage decay in LMLOs.