Robust and Superhydrophobic Polydimethylsiloxane/Ni@Ti3C2Tx Nanocomposite Coatings with Assembled Eyelash-Like Microstructure Array: A New Approach for Effective Passive Anti-Icing and Active Photothermal Deicing.

To solve the problem of ice condensation and adhesion, it is urgent to develop new anti-icing and deicing technologies. This study presented the development of a highly efficient photothermal-enhanced superhydrophobic PDMS/Ni@Ti3C2Tx composite film (m-NMPA) fabricated cost-effectively and straightforwardly. This film was fabricated utilizing PDMS as a hydrophobic agent, adhesive, and surface protector, while Ni@Ti3C2Tx as a magnetic photothermal filler innovatively. Through a simple spraying method, the filler is guided by a strong magnetic field to self-assemble into an eyelash-like microstructure array. The unique structure not only imparts superhydrophobic properties to the surface but also constructs an efficient "light-capturing" architecture. Remarkably, the m-NMPA film demonstrates outstanding superhydrophobic passive anti-icing and efficient photothermal active deicing performance without the use of fluorinated chemicals. The micro-/nanostructure of the film forms a gas layer, significantly delaying the freezing time of water. Particularly under extreme cold conditions (-30 °C), the freezing time is extended by a factor of 7.3 compared to the bare substrate. Furthermore, under sunlight exposure, surface droplets do not freeze. The excellent photothermal performance is attributed to the firm anchoring of nickel particles on the MXene surface, facilitating effective "point-to-face" photothermal synergy. The eyelash-like microarray structure enhances light-capturing capability, resulting in a high light absorption rate of 98%. Furthermore, the microstructure aids in maintaining heat at the uppermost layer of the surface, maximizing the utilization of thermal energy for ice melting and frost thawing. Under solar irradiation, the m-NMPA film can rapidly melt approximately a 4 mm thick ice layer within 558 s and expel the melted water promptly, reducing the risk of secondary icing. Additionally, the ice adhesion force on the surface of the m-NMPA film is remarkably low, with an adhesion strength of approximately 4.7 kPa for a 1 × 1 cm2 ice column. After undergoing rigorous durability tests, including xenon lamp weathering test, pressure resistance test, repeated adhesive tape testing, xenon lamp irradiation, water drop impact testing, and repeated brushing with hydrochloric acid and particles, the film's surface structure and superhydrophobic performance have remained exceptional. The photothermal superhydrophobic passive anti-icing and active deicing technology in this work rely on sustainable solar energy for efficient heat generation. It presents broad prospects for practical applications with advantages such as simple processing method, environmental friendliness, outstanding anti-icing effects, and exceptional durability.

In-situ construct CuInS2/Bi/Bi2MoO6 S-scheme/Schottky dual heterojunctions catalyst for enhanced photocatalytic degradation of diclofenac sodium.

In this paper, the S-scheme/Schottky heterojunction photocatalyst (CuInS2/Bi/Bi2MoO6, CIS/Bi/BMO) was successfully constructed via a facile in-situ solvothermal method, aimed at enhancing its photocatalytic performance. The results of the study on the photocatalytic degradation of diclofenac sodium (DCF) under simulated solar light irradiation revealed that the as-prepared composite exhibited remarkable catalytic efficiency in comparison to the pristine Bi2MoO6 and CuInS2. The plasmonic bismuth (Bi) was formed during the solvothermal process. Subsequently, CuInS2 and Bi were grown on the surface of Bi2MoO6 leading to forming CIS/BMO S-scheme heterojunction, along with a Schottky junction between Bi and Bi2MoO6. The use of ethylene glycol as a support was the main reason for the significant improvement in photocatalytic efficiency in the degradation of DCF. Moreover, the probable photocatalytic mechanisms for the degradation of DCF had been proposed based on the active species quenching experiments. The eleven degradation products were detected by HPLC-MS, and the degradation reaction pathway of DCF was deduced. Additionally, the CIS/Bi/BMO photocatalyst exhibited a consistently high removal rate after four cycles. This study proposes a new strategy for designing efficient S-scheme/Schottky heterojunction photocatalysts for solar energy conversion.

Improving the detection accuracy of the dual SERS aptasensor system with uncontrollable SERS "hot spot" using machine learning tools.

BACKGROUND: Simultaneous detection of food contaminants is crucial in addressing the collective health hazards arising from the presence of multiple contaminants. However, traditional multi-competitive surface-enhanced Raman scattering (SERS) aptasensors face difficulties in achieving simultaneous accurate detection of multiple target substances due to the uncontrollable SERS "hot spots". In this study, using chloramphenicol (CAP) and estradiol (E2) as two target substances, we introduced a novel approach that combines machine learning methods with a dual SERS aptasensor, enabling simultaneous high-sensitivity and accurate detection of both target substances. RESULTS: The strategy effectively minimizes the interference from characteristic Raman peaks commonly encountered in traditional multi-competitive SERS aptasensors. For this sensing system, the Au@4-MBA@Ag nanoparticles modified with sulfhydryl (SH)-CAP aptamer and Au@DTNB@Ag NPs modified with sulfhydryl (SH)-E2 aptamer were used as signal probes. Additionally, Fe3O4@Au nanoflowers integrated with SH-CAP aptamer complementary DNA and SH-E2 aptamer complementary DNA were used as capture probes, respectively. When compared to linear regression random forest, and support vector regression (SVR) models, the proposed artificial neural network (ANN) model exhibited superior precision, demonstrating R2 values of 0.963, 0.976, 0.991, and 0.970 for the training set, test set, validation set, and entire dataset, respectively. Validation with ten spectral groups reported an average error of 244 µg L-1. SIGNIFICANCE: The essence of our study lies in its capacity to address a persistent challenge encountered by traditional multiple competitive SERS aptasensors - the interference generated by uncontrollable SERS "hot spots" that hinders simultaneous quantification. The accuracy of the predictive model for simultaneous detection of two target substances was significantly improved using machine learning tools. This innovative technique offers promising avenues for the accurate and high-sensitive simultaneous detection of multiple food and environmental contaminants.

The development of posterior reduction forceps for atlantoaxial dislocation and its preliminary application in irreducible atlantoaxial dislocation.

OBJECTIVE: To develop posterior reduction forceps for atlantoaxial dislocation and evaluate the preliminary clinical application of this forceps in assisting simple posterior screw-rod system reduction and fixation in the treatment of irreducible atlantoaxial dislocation. METHODS: Based on the posterior atlantoaxial screw-rod system, posterior reduction forceps was developed to assist simple posterior screw-rod system for the treatment of irreducible atlantoaxial dislocation. From January 2021 to October 2022, 10 cases with irreducible atlantoaxial dislocation were treated with this technique. The Japanese Orthopaedic Association (JOA) score was applied before and after surgery to evaluate the neurological status of the patient, and the Atlanto-dental interval (ADI) was measured before and after surgery to evaluate the atlantoaxial reduction. X-ray and CT were performed to evaluate internal fixation, atlantoaxial sequence and bone graft fusion during regular follow-up. MRI was performed to evaluate the status of atlantoaxial reduction and spinal cord compression after surgery. RESULTS: All 10 patients were successfully operated, and there were no complications such as spinal nerve and vascular injury. Postoperative clinical symptoms were significantly relieved in all patients, and postoperative JOA score and ADI were significantly improved compared with those before surgery (P < 0.05). CONCLUSIONS: The developed posterior reduction forceps for atlantoaxial dislocation can assist the simple posterior screw-rod system in the treatment of irreducible atlantoaxial dislocation to avoid the release in anterior or posterior approach and reduce the difficulty of surgery. The preliminary results of this technique are satisfactory and it has a good application prospect.

Significant effect of posterior line treatment of HER2 positive advanced gastric cancer: A case report.

At present, there are few options for third line and above treatment of advanced gastric cancer and the single drug effect is poor. HER2 positive gastric cancer is an important subtype of gastric cancer and has certain immune characteristics. The combination of HER2 inhibitor and PD-1 inhibitor has a synergistic effect, and anti-tumor drugs targeting HER2 can play an anti-angiogenesis role by downregulating VEGF. We report a patient with HER2-positive gastric cancer who developed post-operative tumor recurrence and metastasis after adjuvant chemotherapy and radiotherapy. Trastuzumab combined with albumin paclitaxel was used as second-line treatment with progression-free survival for 9 months. In third line treatment, we retained trastuzumab and combined it with camrelizumab and apatinib. During the treatment period, although the patient stopped taking the drugs due to the side effects of camrelizumab and apatinib, he achieved a PFS of 10.4 months. Considering the good effect of the third line treatment, we added another PD-1 inhibitor and continued to combine trastuzumab treatment. We found that the patient still benefited from the treatment and continued to survive for another 4 months. At present, the patient is treated with DisitamabVedotin (HER2-ADC) combined with PD-1 inhibitor, and no overall survival outcome has been observed.

Developmental pleiotropy of SDP1 from seedling to mature stages in B. napus.

Rapeseed, an important oil crop, relies on robust seedling emergence for optimal yields. Seedling emergence in the field is vulnerable to various factors, among which inadequate self-supply of energy is crucial to limiting seedling growth in early stage. SUGAR-DEPENDENT1 (SDP1) initiates triacylglycerol (TAG) degradation, yet its detailed function has not been determined in B. napus. Here, we focused on the effects of plant growth during whole growth stages and energy mobilization during seedling establishment by mutation in BnSDP1. Protein sequence alignment and haplotypic analysis revealed the conservation of SDP1 among species, with a favorable haplotype enhancing oil content. Investigation of agronomic traits indicated bnsdp1 had a minor impact on vegetative growth and no obvious developmental defects when compared with wild type (WT) across growth stages. The seed oil content was improved by 2.0-2.37% in bnsdp1 lines, with slight reductions in silique length and seed number per silique. Furthermore, bnsdp1 resulted in lower seedling emergence, characterized by a shrunken hypocotyl and poor photosynthetic capacity in the early stages. Additionally, impaired seedling growth, especially in yellow seedlings, was not fully rescued in medium supplemented with exogenous sucrose. The limited lipid turnover in bnsdp1 was accompanied by induced amino acid degradation and PPDK-dependent gluconeogenesis pathway. Analysis of the metabolites in cotyledons revealed active amino acid metabolism and suppressed lipid degradation, consistent with the RNA-seq results. Finally, we proposed strategies for applying BnSDP1 in molecular breeding. Our study provides theoretical guidance for understanding trade-off between oil accumulation and seedling energy mobilization in B. napus.

A Universal Strategy to Construct High-Performance Homo- and Heterogeneous Microgel Assembly Bioinks.

Three dimensional (3D) extrusion bioprinting aims to replicate the complex architectures and functions of natural tissues and organs. However, the conventional hydrogel and new-emerging microgel bioinks are both difficult in achieving simultaneously high shape-fidelity and good maintenance of cell viability/function, leading to limited amount of qualified hydrogel/microgel bioinks. Herein, a universal strategy is reported to construct high-performance microgel assembly (MA) bioinks by using epigallocatechin gallate-modified hyaluronic acid (HA-EGCG) as coating agent and phenylboronic acid grafted hyaluronic acid (HA-PBA) as assembling agent. HA-EGCG can spontaneously form uniform coating on the microgel surface via mussel-inspired chemistry, while HA-PBA quickly forms dynamic phenylborate bonds with HA-EGCG, conferring the as-prepared MA bioinks with excellent rheological properties, self-healing, and tissue-adhesion. More importantly, this strategy is applicable to various microgel materials, enabling the preparation of homo- and heterogeneous MA (homo-MA and hetero-MA) bioinks and the hierarchical printing of complicated structures with high fidelity by integration of different microgels containing multiple materials/cells in spatial and compositional levels. It further demonstrates the printing of breast cancer organoid in vitro using homo-MA and hetero-MA bioinks and its preliminary application for drug testing. This universal strategy offers a new solution to construct high-performance bioinks for extrusion bioprinting.

TIGIT regulates CD4+ T cell immunity against polymicrobial sepsis.

Background: Sepsis is one of the major causes of death and increased health care burden in modern intensive care units. Immune checkpoints have been prompted to be key modulators of T cell activation, T cell tolerance and T cell exhaustion. This study was designed to investigate the role of the negative immune checkpoint, T cell immunoglobulin and ITIM domain (TIGIT), in the early stage of sepsis. Method: An experimental murine model of sepsis was developed by cecal ligation and puncture (CLP). TIGIT and CD155 expression in splenocytes at different time points were assessed using flow cytometry. And the phenotypes of TIGIT-deficient (TIGIT-/-) and wild-type (WT) mice were evaluated to explore the engagement of TIGIT in the acute phase of sepsis. In addition, the characteristics were also evaluated in the WT septic mice pretreated with anti-TIGIT antibody. TIGIT and CD155 expression in tissues was measured using real-time quantitative PCR and immunofluorescence staining. Proliferation and effector function of splenic immune cells were evaluated by flow cytometry. Clinical severity and tissue injury were scored to evaluate the function of TIGIT on sepsis. Additionally, tissue injury biomarkers in peripheral blood, as well as bacterial load in peritoneal lavage fluid and liver were also measured. Results: The expression of TIGIT in splenic T cells and NK cells was significantly elevated at 24 hours post CLP.TIGIT and CD155 mRNA levels were upregulated in sepsis-involved organs when mice were challenged with CLP. In CLP-induced sepsis, CD4+ T cells from TIGIT-/- mice shown increased proliferation potency and cytokine production when compared with that from WT mice. Meanwhile, innate immune system was mobilized in TIGIT-/- mice as indicated by increased proportion of neutrophils and macrophages with potent effector function. In addition, tissue injury and bacteria burden in the peritoneal cavity and liver was reduced in TIGIT-/- mice with CLP induced sepsis. Similar results were observed in mice treated with anti-TIGIT antibody. Conclusion: TIGIT modulates CD4+ T cell response against polymicrobial sepsis, suggesting that TIGIT could serve as a potential therapeutic target for sepsis.

Application of ultrasound treatment in pork marination: Effects on moisture migration and microstructure.

To better understanding the effects of ultrasonic marination on the porcine tissue, the moisture migration and microstructure were investigated in this study. Additionally, the acoustic field distribution was analysis using COMSOL Multiphysics. The low-filed NMR results demonstrated that ultrasonic curing induced a leftward shift in T21 and a rightward shift in T22, accompanied by a significant reduction in A22, thereby enhancing the water-holding capacity of pork. The SEM and TEM observation showed that the presence of larger interstitial gaps between muscle fibers facilitated the diffusion of NaCl. The simulation analysis revealed that the acoustic field at 26.8 kHz showed minimal standing wave effects and more pronounced cavitation, which was the main reason for the best curing effect at this frequency. The scale-up test showed the NaCl content in pork reached 1% after ultrasound curing, indicating the potential application of ultrasonic marination technology in domestic refrigerators.

RGD-coated polymeric microbubbles promote ultrasound-mediated drug delivery in an inflamed endothelium-pericyte co-culture model of the blood-brain barrier.

Drug delivery to central nervous pathologies is compromised by the blood-brain barrier (BBB). A clinically explored strategy to promote drug delivery across the BBB is sonopermeation, which relies on the combined use of ultrasound (US) and microbubbles (MB) to induce temporally and spatially controlled opening of the BBB. We developed an advanced in vitro BBB model to study the impact of sonopermeation on the delivery of the prototypic polymeric drug carrier pHPMA as a larger molecule and the small molecule antiviral drug ribavirin. This was done under standard and under inflammatory conditions, employing both untargeted and RGD peptide-coated MB. The BBB model is based on human cerebral capillary endothelial cells and human placental pericytes, which are co-cultivated in transwell inserts and which present with proper transendothelial electrical resistance (TEER). Sonopermeation induced a significant decrease in TEER values and facilitated the trans-BBB delivery of fluorescently labeled pHPMA (Atto488-pHPMA). To study drug delivery under inflamed endothelial conditions, which are typical for e.g. tumors, neurodegenerative diseases and CNS infections, tumor necrosis factor (TNF) was employed to induce inflammation in the BBB model. RGD-coated MB bound to and permeabilized the inflamed endothelium-pericyte co-culture model, and potently improved Atto488-pHPMA and ribavirin delivery. Taken together, our work combines in vitro BBB bioengineering with MB-mediated drug delivery enhancement, thereby providing a framework for future studies on optimization of US-mediated drug delivery to the brain.

mRNA Sonotransfection of Tumors with Polymeric Microbubbles: Co-Formulation versus Co-Administration.

Despite its high potential, non-viral gene therapy of cancer remains challenging due to inefficient nucleic acid delivery. Ultrasound (US) with microbubbles (MB) can open biological barriers and thus improve DNA and mRNA passage. Polymeric MB are an interesting alternative to clinically used lipid-coated MB because of their high stability, narrow size distribution, and easy functionalization. However, besides choosing the ideal MB, it remains unclear whether nanocarrier-encapsulated mRNA should be administered separately (co-administration) or conjugated to MB (co-formulation). Therefore, the impact of poly(n-butyl cyanoacrylate) MB co-administration with mRNA-DOTAP/DOPE lipoplexes or their co-formulation on the transfection of cancer cells in vitro and in vivo is analyzed. Sonotransfection improved mRNA delivery into 4T1 breast cancer cells in vitro with co-administration being more efficient than co-formulation. In vivo, the co-administration sonotransfection approach also resulted in higher transfection efficiency and reached deeper into the tumor tissue. On the contrary, co-formulation mainly promoted transfection of endothelial and perivascular cells. Furthermore, the co-formulation approach is much more dependent on the US trigger, resulting in significantly lower off-site transfection. Thus, the findings indicate that the choice of co-administration or co-formulation in sonotransfection should depend on the targeted cell population, tolerable off-site transfection, and the therapeutic purpose.

Comparison of transoral anterior Jefferson-fracture reduction plate and posterior screw-rod fixation in C1-ring osteosynthesis for unstable atlas fractures.

Objective: To compare the clinical outcomes of transoral anterior Jefferson fracture reduction plate (JeRP) and posterior screw rod (PSR) surgery for unstable atlas fractures via C1-ring osteosynthesis. Methods: From June 2009 to June 2022, 49 consecutive patients with unstable atlas fractures were treated by transoral anterior JeRP fixation (JeRP group) or PSR fixation (PSR group) and followed up at our hospital; 30 males and 19 females were included. The visual analogue scale (VAS) score, neck disability index (NDI), distance to anterior arch fracture (DAAF), distance to posterior arch fracture (DPAF), lateral mass displacement (LMDs), Redlund-Johnell value, postoperative complications, and fracture healing rate were retrospectively collected and statistically analyzed. Results: Compared with that in the PSR group, the bleeding volume in the JeRP group was lower, and the length of hospital stay was longer. The VAS scores and NDIs of both groups were significantly improved after surgery. The postoperative DAAF and DPAF were significantly smaller after surgery in both groups. Compared with the significantly shorter DPAF in the PSR group, the JeRP group had a smaller DAAF, shorter LMDs and larger Redlund-Johnell value postoperatively and at the final follow-up. The fracture healing rate at 3 months after surgery was significantly greater in the JeRP group (P<0.05). Conclusion: Both C1-ring osteosynthesis procedures for treating unstable atlas fractures yield satisfactory clinical outcomes. Transoral anterior JeRP fixation is more effective than PSR fixation for holistic fracture reduction and short-term fracture healing, but the hospital stay is longer.

Correlates of supportive care needs among Asian Americans with colorectal, liver, or lung cancer from a web-based patient navigation portal intervention: The Patient COUNTS study.

BACKGROUND: Cancer is the leading cause of death among Asian Americans, who often face barriers to cancer care. Cancer supportive care needs among Asian Americans remain understudied. AIMS: We examined cancer supportive care needs and participant factors correlated with these needs, identified profiles of supportive care needs, and examined whether needs profiles are associated with quality of life among Asian American adults. METHODS AND RESULTS: We recruited 47 Asian American adults with colorectal, liver, or lung cancer who spoke Chinese, English, or Vietnamese, and were starting or undergoing cancer treatment. We assessed cancer supportive care needs in four domains: cancer information, daily living, behavioral health, and language assistance. Hierarchical cluster analysis was used to identify clusters of participants based on their supportive need profiles to further examine the association between need profiles and quality of life (QoL) assessed by the Functional Assessment of Cancer Therapy. Participants (mean age = 57.6) included 72% males and 62% spoke English less than very well. Older participants (age ≥ 65) and those with annual income <$50K reported higher daily living needs. Men and younger participants (age < 50) reported higher behavioral health needs. We found three clusters displaying distinct cancer supportive need profiles: Cluster 1 (28% of the sample) displayed high needs across all domains; Cluster 2 (51%) had low needs across all domains; and Cluster 3 (21%) had high needs for cancer information and daily living. Cluster 1 participants reported the lowest QoL. CONCLUSION: Cancer supportive care needs among Asian American patients with colorectal, liver, and lung cancer were associated with patient characteristics and QoL. Understanding cancer supportive care needs will inform future interventions to improve care and QoL for Asian American patients with cancer. CLINICALTRIALS: gov Identifier: NCT03867916.

Unexpected Promotion Effect of H2O on the Selective Catalytic Reduction of NOx with NH3 over Cu-SSZ-39 Catalysts.

Water molecules commonly inhibit the selective catalytic reduction (SCR) of NOx with NH3 on most catalysts, and water resistance is a long-standing challenge for SCR technology. Herein, by combining experimental measurements and density functional theory (DFT) calculations, we found that water molecules do not inhibit and even promote the NOx conversion to some extent over the Cu-SSZ-39 zeolites, a promising SCR catalyst. Water acting as a ligand on active Cu sites and as a reactant in the SCR reaction significantly improves the O2 activation performance and reduces the overall energy barrier of the catalytic cycle. This work unveils the mechanism of the unexpected promotion effect of water on the NH3-SCR reaction over Cu-SSZ-39 and provides fundamental insight into the development of zeolite-based SCR catalysts with excellent activity and water resistance.

Detecting protein-protein interaction during liquid-liquid phase separation using fluorogenic protein sensors.

The formation of cellular condensates, akin to membraneless organelles, is typically mediated by liquid-liquid phase separation (LLPS), during which proteins and RNA molecules interact with each other via multivalent interactions. Gaining a comprehensive understanding of these interactions holds significance in unraveling the mechanisms underlying condensate formation and the pathology of related diseases. In an attempt toward this end, fluorescence microscopy is often used to examine the colocalization of target proteins/RNAs. However, fluorescence colocalization is inadequate to reliably identify protein interaction due to the diffraction limit of traditional fluorescence microscopy. In this study, we achieve this goal through adopting a novel chemical biology approach via the dimerization-dependent fluorescent proteins (ddFPs). We succeeded in utilizing ddFPs to detect protein interaction during LLPS both in vitro and in living cells. The ddFPs allow us to investigate the interaction between two important LLPS-associated proteins, FUS and TDP-43, as cellular condensates formed. Importantly, we revealed that their interaction was associated with RNA binding upon LLPS, indicating that RNA plays a critical role in mediating interactions between RBPs. More broadly, we envision that utilization of ddFPs would reveal previously unknown protein-protein interaction and uncover their functional roles in the formation and disassembly of biomolecular condensates.

Micropolarity governs the structural organization of biomolecular condensates.

Membraneless organelles within cells have unique microenvironments that play a critical role in their functions. However, how microenvironments of biomolecular condensates affect their structure and function remains unknown. In this study, we investigated the micropolarity and microviscosity of model biomolecular condensates by fluorescence lifetime imaging coupling with environmentally sensitive fluorophores. Using both in vitro and in cellulo systems, we demonstrated that sufficient micropolarity difference is key to forming multilayered condensates, where the shells present more polar microenvironments than the cores. Furthermore, micropolarity changes were shown to be accompanied by conversions of the layered structures. Decreased micropolarities of the granular components, accompanied by the increased micropolarities of the dense fibrillar components, result in the relocation of different nucleolus subcompartments in transcription-stalled conditions. Our results demonstrate the central role of the previously overlooked micropolarity in the regulation of structures and functions of membraneless organelles.

Genetic divergence and migration patterns of a galatheoid squat lobster highlight the need for deep-sea conservation.

Information on genetic divergence and migration patterns of vent- and seep-endemic macrobenthos can help delimit biogeographical provinces and provide scientific guidelines for deep-sea conservation under the growing threats of anthropogenic disturbances. Nevertheless, related studies are still scarce, impeding the informed conservation of these hotspots of deep-sea biodiversity. To bridge this knowledge gap, we conducted a population connectivity study on the galatheoid squat lobster Shinkaia crosnieri - a deep-sea foundation species widely distributed in vent and seep ecosystems in the Northwest Pacific. With the application of an interdisciplinary methodology involving population genomics and oceanographic approaches, we unveiled two semi-isolated lineages of S. crosnieri with limited and asymmetrical gene flow potentially shaped by the geographic settings, habitat types, and ocean currents - one comprising vent populations in the Okinawa Trough, with those inhabiting the southern trough area likely serving as the source; the other being the Jiaolong (JR) seep population in the South China Sea. The latter might have recently experienced a pronounced demographic contraction and exhibited genetic introgression from the Okinawa Trough lineage, potentially mediated by the intrusion of the North Pacific Intermediate Water. We then compared the biogeographic patterns between S. crosnieri and two other representative and co-occurring vent- and seep-endemic species using published data. Based on their biogeographical subdivisions and source-sink dynamics, we highlighted the southern Okinawa Trough vents and the JR seep warrant imperative conservation efforts to sustain the deep-sea biodiversity in the Northwest Pacific.

Erratum: PPAR δ inhibition protects against palmitic acid-LPS induced lipidosis and injury in cultured hepatocyte L02 cell: Erratum.

[This corrects the article DOI: 10.7150/ijms.37677.].

Surgical Failure and Revision Strategy for Atlantoaxial Dislocation: A retrospective study of 109 Cases.

STUDY DESIGN: Retrospective study. OBJECTIVE: To classify surgical failures following atlantoaxial dislocation, present strategies for revisions and evaluate the clinical results of revision surgery. SUMMARY OF BACKGROUND DATA: With the increase in atlantoaxial dislocation surgery, the number of surgical failures has gradually risen. However, current reports on atlantoaxial surgical revision are limited in scope. There remains a lack of summary regarding the causes of surgical failure, a detailed classification system, and no proposed strategy for revision surgery. METHODS: 109 cases of failed surgery following atlantoaxial dislocation were classified according to the reduction immediately after surgery and the fusion status before revision. The reduction, decompression, fusion status and outcomes following revision surgery were evaluated by X-ray, CT, MRI and JOA score. The data were analyzed statistically with a paired-samples t test and multivaraible logistic regression analysis. RESULTS: The 109 patients were classified into three categories of failure: non-reduction with non-fusion (NR-NF, 73 cases), non-reduction with fusion (NR-F, 19 cases), and reduction with non-fusion (R-NF, 17 cases). Sixty-four patients underwent anterior revision, 21 posterior revision, and 24 anteroposterior revision. Postoperative complications were the primary cause of early revisions. After revision, complete decompression was achieved in all cases, anatomical reduction in 89 cases, significant improvement of JOA score in 77 cases, and fusion achieved in 86 cases. Twelve cases experienced surgical complications and 3 underwent a second revision. CONCLUSIONS: We found that NR-NF was the most common type of failure following surgery for atlantoaxial dislocation. Revision strategies can be guided according to our descriptive classification of failure, and revision surgery should focus on achieving adequate reduction, appropriate fixation and reliable fusion to optimize post-surgical outcomes.

Long-term leaching characteristics of heavy metals from bauxite tailing slurry-based geopolymer backfill: experimental and numerical simulation studies.

This study aimed to evaluate the potential of replacing fly ash (FA) with bauxite tailing (BT) slurry for geopolymer synthesis and investigate the long-term leaching behaviour of BT slurry/FA geopolymers (BFGs) for heavy metal immobilisation. The mechanical properties and heavy metal immobilisation efficiency of BFGs were tested, and numerical simulations were conducted to assess their environmental impact as a backfill material. The results showed that the incorporation of 5 Wt.% BT increased the early compressive strength of the geopolymer without any additional treatment. A small quantity of Cu2+ improved the mechanical strength, while excess heavy metals harmed the geopolymer. Heavy metal immobilisation efficiency decreased with increased heavy metal addition and exceeded 99.9% for Pb2+ and Cu2+ when simulating acid rain leachate. The modified Elovich equation described the leaching kinetics of Cu2+ well, and the leaching rate decreased with time. Numerical analysis indicated that Cu2+ leaching from landfill leachate occurred in three phases, with an initial increase followed by a gradual decrease, stabilisation, and diffusion into the surrounding soil layer. This study provides insight into the material's long-term stability and environmental performance, offering a scientific basis for relevant engineering applications.HighlightsDirect utilisation of unprocessed tailing slurry to synthesise geopolymer.The leaching pattern of Pb2+ and Cu2+ under acidic conditions was explored.The modified Elovich equation effectively describes the leaching kinetics of Cu2+.The environmental impact of bauxite tailings slurry-based geopolymers was evaluated.