Preoperative assessment of bone density for dental implantation: a comparative study of three different ROI methods.

BACKGROUND: Dental cone beam computed tomography (CBCT) is commonly used to evaluate cancellous bone density before dental implant surgery. However, to our knowledge, no measurement approach has been standardized yet. This study aimed to evaluate the relationship between three different regions of interest (ROI) methods on cancellous bone density at the dental implant site using dental CBCT images. METHODS: Patients' dental CBCT images (n = 300) obtained before dental implant surgery were processed using Mimics (Materialise, Leuven, Belgium). At the potential implant sites, the rectangle, cylinder, and surrounding cylinder ROI methods were used to measure bone density. Repeated measures one-way analysis of variance was performed to compare the three ROI methods in terms of measurement results. Pearson correlation analysis was performed to identify the likely pair-wise correlations between the three ROI methods. RESULTS: The density value obtained using the surrounding cylinder approach (grayscale value [GV],523.56 ± 228.03) was significantly higher than the values obtained using the rectangle (GV, 497.04 ± 236.69) and cylinder (GV,493 ± 231.19) ROI methods in terms of results. Furthermore, significant correlations were noted between the ROI methods (r > 0.965; p < 0.001). CONCLUSIONS: The density measured using the surrounding cylinder method was the highest. The choice of method may not influence the trends of measurement results. TRIAL REGISTRATION: This study was approved by the Institutional Review Board of China Medical University Hospital, No. CMUH111-REC3-205. Informed consent was waived by the Institutional Review Board of China Medical University Hospital, CMUH111-REC3-205, owing to the retrospective nature of the study.

Maximum standardised uptake value is prognostic in patients with early-stage squamous cell carcinoma of the tongue.

The aims of this paper were to evaluate the relation between the preoperative primary tumour maximum standardised uptake value (SUVmax, tSUVmax) and clinicopathological features, including depth of invasion (DOI), recurrence factors, and survival outcomes, and to compare the prognostic value of tSUVmax with that of other factors associated with the recurrence of early-stage oral squamous cell carcinoma (OSCC) of the tongue. We retrospectively analysed data from 155 patients. All patients were treated and regularly monitored at the Changhua Christian Hospital (CCH). Only those who had undergone 18F-fluorodeoxyglucose positron emission tomography (FDG-PET) in the 14 days before surgery were included. A tSUVmax of >5.2 was found to be the sole strong predictor of a DOI of >4 mm. A tSUVmax of >7.6 was strongly associated with pT2 SCC of the tongue, more aggressive DOI, and perineural invasion. DOI and tSUVmax could be used to predict disease-free survival (DFS) for early-stage SCC of the tongue, and they showed stronger predictive power than the traditional American Joint Committee on Cancer (AJCC) T stage. Therefore tSUVmax could be a prognostic tool for DFS in AJCC early-stage SCC of the tongue.

Survival and clinicopathological characteristics of cT4b oral squamous cell carcinoma based on different treatment modalities: A single-center retrospective study.

INTRODUCTION: Primary surgical treatment for oral squamous cell carcinoma (OSCC) is reserved for T1 to T4a tumors, but not for T4b tumors, according to the present National Comprehensive Cancer Network clinical practice guidelines. In this retrospective study, we aimed to determine the association between the clinicopathological characteristics and different treatment modalities for T4b OSCC based on whether patients received primary surgical treatment. Therefore, we conducted a survival analysis based on different treatment modalities. METHODS: This retrospective cohort study enrolled 125 patients with clinical stage T4b OSCC who received treatment and were followed up at Changhua Christian Hospital between January 1, 2008 and December 31, 2018. RESULTS: Overall, 81 patients received primary surgical treatment and 44 received primary nonsurgical treatment. Comparison of the clinicopathological characteristics between those who did and did not undergo surgery revealed no significant differences in age at tumor diagnosis, tumor location, clinical N stage, and involved tumor area based on computed tomography or magnetic resonance imaging, or stratified Charlson Comorbidity Index scores. In the survival analysis, Kaplan-Meier curves revealed that patients who received treatment modalities including surgery exhibited better survival than those who received treatment modalities that did not include surgery. CONCLUSIONS: In the present study, patients with T4b OSCC treated with primary surgery had a better overall survival rate than those who received nonsurgical treatment. In the future, it will be necessary for clinicians worldwide to report the treatment outcomes of patients with T4b OSCC based on the common criteria.

E3 ligase activity of Carboxyl terminus of Hsc70 interacting protein (CHIP) in Wharton's jelly derived mesenchymal stem cells improves their persistence under hyperglycemic stress and promotes the prophylactic effects against diabetic cardiac damages.

Recent studies indicate that umbilical cord stem cells are cytoprotective against several disorders. One critical limitation in using stem cells is reduction in their viability under stressful conditions, such as diabetes. However, the molecular intricacies responsible for diabetic conditions are not fully elucidated. In this study, we found that high glucose (HG) conditions induced loss of chaperone homeostasis, stabilized PTEN, triggered the downstream signaling cascade, and induced apoptosis and oxidative stress in Wharton's jelly derived mesenchymal stem cells (WJMSCs). Increased Carboxyl terminus of Hsc70 interacting protein (CHIP) expression promoted phosphatase and tensin homolog (PTEN) degradation via the ubiquitin-proteasome system and shortened its half-life during HG stress. Docking studies confirmed the interaction of CHIP with PTEN and FOXO3a with the Bim promoter region. Further, it was found that the chaperone system is involved in CHIP-mediated PTEN proteasomal degradation. CHIP depletion stabilizes PTEN whereas PTEN inhibition showed an inverse effect. CHIP overactivation suppressed the binding of FOXO3a with bim. Coculturing CHIP overexpressed WJMSCs suppressed HG-induced apoptosis and oxidative stress in embryo derived cardiac cell lines. CHIP overexpressing and PTEN silenced WJMSCs ameliorated diabetic effects in streptozotocin (STZ) induced diabetic rats and further improved their body weight and heart weight, and rescued from hyperglycemia-induced cardiac injury. Considering these, the current study suggests that CHIP confers resistance to apoptosis and acts as a potentiation factor in WJMSCs to provide protection from degenerative effects of diabetes.

Impact on patients with oral squamous cell carcinoma in different anatomical subsites: a single-center study in Taiwan.

The incidence of oral cavity squamous cell carcinoma (OSCC) is particularly high in South Asia. According to the National Comprehensive Cancer Network, OSCC can arise in several subsites. We investigated survival rates and the clinical and pathological characteristics of OSCC in different anatomical subsites in the Taiwanese population. We retrospectively analyzed data for 3010 patients with OSCC treated at the Changhua Christian Hospital. Subsequently, we compared clinical and pathological features of OSCC in different subsites. Pathological T4 stage OSCCs occurred in the alveolar ridge and retromolar trigone in 56.4% and 43.7% of cases, respectively. More than 25% of patients with tongue OSCC and 23.4% of those with retromolar OSCC had lymph node metastasis. The prognosis was worst for hard palate OSCC (hazard ratio 1.848; p < 0.001) and alveolar ridge OSCC (hazard ratio 1.220; p = 0.017). Retromolar OSCC recurred most often and tongue OSCC second most often. The risk for cancer-related mortality was highest for hard palate OSCC, followed by alveolar ridge and retromolar OSCC. We found distinct differences in survival among the different subsites of OSCC. Our findings may also help prompt future investigations of OSCC in different subsites in Taiwanese patients.

FDG-PET predicts bone invasion and prognosis in patients with oral squamous cell carcinoma.

18F-fluorodeoxyglucose-positron emission tomography (FDG-PET) is widely used for tumor staging. This study sought to determine the relationship of preoperative primary tumor SUVmax (tSUVmax) with the clinicopathological features of patients with OSCC and to compare the prognostic ability of tSUVmax with that of other recurrence factors. Data of 340 patients with OSCC who were diagnosed, treated, and followed up at the Changhua Christian Hospital were retrospectively analyzed. Only patients with OSCC arising from gingiva, palate, floor of the mouth, and retromolar trigone and those who had received preoperative FDG-PET within 2 weeks before surgery were included. tSUVmax value > 9.2 was the strong predictor of bone invasion (area under the receiver operating characteristic curve, 0.844). tSUVmax value > 7.2 showed a strong association with advanced pathological T stage and recurrence factors and was associated with poor survival; tSUVmax > 7.2 showed stronger predictive power for poor disease-free survival (DFS) than pT stage and the other recurrence factors related to primary tumor. FDG-PET can be a useful supplement to contrast-enhanced computed tomography or contrast-enhanced magnetic resonance imaging for diagnosing bone invasion by OSCC. The tSUVmax value was an independent predictor of DFS in this study.

COVID-19 in pregnancy: a systematic review of chest CT findings and associated clinical features in 427 patients.

PURPOSE: Our purpose was to conduct a comprehensive systematic review of all existing literature regarding imaging findings on chest CT and associated clinical features in pregnant patients diagnosed with COVID-19. MATERIALS & METHODS: A literature search was conducted on April 21, 2020 and updated on July 24, 2020 using PubMed, Embase, World Health Organization, and Google Scholar databases. Only studies which described chest CT findings of COVID-19 in pregnant patients were included for analysis. RESULTS: A total of 67 articles and 427 pregnant patients diagnosed with COVID-19 were analyzed. The most frequently encountered pulmonary findings on chest CT were ground-glass opacities (77.2%, 250/324), posterior lung involvement (72.5%, 50/69), multilobar involvement (71.8%, 239/333), bilateral lung involvement (69.4%, 231/333), peripheral distribution (68.1%, 98/144), and consolidation (40.9%, 94/230). Pregnant patients were also found to present more frequently with consolidation (40.9% vs. 21.0-31.8%) and pleural effusion (30.0% vs. 5.0%) in comparison to the general population. Associated clinical features included antepartum fever (198 cases), lymphopenia (128 cases), and neutrophilia (97 cases). Of the 251 neonates delivered, 96.8% had negative RT-PCR and/or IgG antibody testing for COVID-19. In the eight cases (3.2%) of reported neonatal infection, tests were either conducted on samples collected up to 72 h after birth or were found negative on all subsequent RT-PCR tests. CONCLUSION: Pregnant patients appear to present more commonly with more advanced COVID-19 CT findings compared to the general adult population. Furthermore, characteristic laboratory abnormalities found in pregnant patients tended to mirror those found in the general patient population. Lastly, results from neonatal testing suggest a low risk of vertical transmission.

New quantitative classification of the anatomical relationship between impacted third molars and the inferior alveolar nerve.

BACKGROUND: Before extracting impacted lower third molars, dentists must first identify the spatial relationship between the inferior alveolar nerve (IAN) and an impacted lower third molar to prevent nerve injury from the extraction. Nevertheless, the current method for describing the spatial relationship between the IAN and an impacted lower third molar is deficient. Therefore, the objectives of this study were to: (1) evaluate the relative position between impacted lower third molars and the IAN; and (2) investigate the relative position between impacted lower third molars and the IAN by using a cylindrical coordinate system. METHODS: From the radiology department's database, we selected computed tomography images of 137 lower third molars (from 75 patients) requiring removal and applied a Cartesian coordinate system by using Mimics, a medical imaging software application, to measure the distribution between impacted mandibular third molars and the IAN. In addition, the orientation of the lower third molar to the IAN was also measured, but by using a cylindrical coordinate system with the IAN as the origin. RESULTS: According to the Cartesian coordinate system, most of the IAN runs through the inferior side of the third molar (78.6 %), followed by the lingual side (11.8 %), and the buccal side (8.9 %); only 0.7 % is positioned between the roots. Unlike the Cartesian coordinate system, the cylindrical coordinate system clearly identified the relative position, r and θ, between the IAN and lower third molar. CONCLUSIONS: Using the cylindrical coordinate system to present the relationship between the IAN and lower third molar as (r, θ) might provide clinical practitioners with a more explicit and objective description of the relative position of both sites. However, comprehensive research and cautious application of this system remain necessary.

Biomechanical analysis of a temporomandibular joint condylar prosthesis during various clenching tasks.

The objective of this study was to evaluate the effect of clenching tasks on the stress and stability of a temporomandibular joint (TMJ) condylar prosthesis, as well as on the stress and strain in the whole mandible and bone surrounding three screws. Three-dimensional finite element models of the mandible and a TMJ condylar prosthesis using three screws were established. Six static clenching tasks were simulated in this study: incisal clench (INC), intercuspal position (ICP), right unilateral molar clench (RMOL), left unilateral molar clench (LMOL), right group function (RGF), and left group function (LGF). Based on the simulation of the six clenching tasks, none of the inserted screws or the TMJ condylar prosthesis were broken. In addition, the stability of the TMJ condylar prosthesis was sufficiently high for bone ongrowth. For the whole mandibular bone, the maximum von Mises stress and von Mises strain observed in the cortical bone and cancellous bone were yielded by the ICP and RMOL, respectively. For the bone surrounding the inserted screws, the maximum von Mises stress and von Mises strain in both the cortical bone and cancellous bone were yielded by the LMOL. Clenching tasks had significant effects on the stress distribution of the TMJ condylar prosthesis, as well as on the stress and strain distribution of the whole mandible and the bone surrounding the inserted screws.

MicroRNA-20a regulates autophagy related protein-ATG16L1 in hypoxia-induced osteoclast differentiation.

Autophagy and autophagy-related proteins (ATGs) play decisive roles in osteoclast differentiation. Emerging lines of evidence show the deregulation of miRNA in autophagic responses. However, the role of hypoxia and involvement of miRNA in osteoclast differentiation are unclear. In the present study, we demonstrate that hypoxia caused induction of autophagy and osteoclast differentiation markers in RAW264.7 cells stimulated with M-CSF and RANKL. In addition, miR-20a was significantly repressed during hypoxia and identified as the prime candidate involved in hypoxia-induced osteoclast differentiation. The results from dual luciferase reporter assay revealed that miR-20a directly targets Atg16l1 by binding to its 3'UTR end. Further, miR-20a transfection studies showed significant down regulation of autophagic proteins (LC3-II and ATG16L1) and osteoclast differentiation markers (Nfatc1, Traf6, and Trap) thus confirming the functional role of miR-20a under hypoxic conditions. Results of chromatin immunoprecipitation assay showed that HIF-1α binds to miRNA-20a. From miRNA Q-PCR results, we confirmed that shRNA HIF-1α knockdown significantly downregulated both autophagy (LC3, p62, Atg5, Atg12, Atg16l1, Atg7, Becn1, Atg9a) and osteoclast markers (Traf6, Nfatc1, Ctsk, cFos, Mmp9, Trap) in RAW264.7 cells. Thus, our findings suggest that the regulatory axis of HIF-1α-miRNA-20a-Atg16l1 might be a critical mechanism for hypoxia-induced osteoclast differentiation.

Trabecular bone structural parameters evaluated using dental cone-beam computed tomography: cellular synthetic bones.

OBJECTIVE: This study compared the adequacy of dental cone beam computed tomography (CBCT) and micro computed tomography (micro-CT) in evaluating the structural parameters of trabecular bones. METHODS: The cellular synthetic bones in 4 density groups (Groups 1-4: 0.12, 0.16, 0.20, and 0.32 g/cm3) were used in this study. Each group comprised 8 experimental specimens that were approximately 1 cm3. Dental CBCT and micro-CT scans were conducted on each specimen to obtain independent measurements of the following 4 trabecular bone structural parameters: bone volume fraction (BV/TV), specific bone surface (BS/BV), trabecular thickness (Tb.Th.), and trabecular separation (Tb.Sp.). Wilcoxon signed ranks tests were used to compare the measurement variations between the dental CBCT and micro-CT scans. A Spearman analysis was conducted to calculate the correlation coefficients (r) of the dental CBCT and micro-CT measurements. RESULTS AND CONCLUSION: Of the 4 groups, the BV/TV and Tb.Th. measured using dental CBCT were larger compared with those measured using micro-CT. By contrast, the BS/BV measured using dental CBCT was significantly less compared with those measured using micro-CT. Furthermore, in the low-density groups (Groups 1 and 2), the Tb.Sp. measured using dental CBCT was smaller compared with those measured using micro-CT. However, the Tb.Sp. measured using dental CBCT was slightly larger in the high-density groups (Groups 3 and 4) than it was in the low density groups. The correlation coefficients between the BV/TV, BS/BV, Tb.Th., and Tb.Sp. values measured using dental CBCT and micro-CT were 0.9296 (p < .001), 0.8061 (p < .001), 0.9390 (p < .001), and 0.9583 (p < .001), respectively. Although the dental CBCT and micro-CT approaches exhibited high correlations, the absolute values of BV/TV, BS/BV, Tb.Th., Tb.Sp. differed significantly between these measurements. Additional studies must be conducted to evaluate using dental CBCT in clinical practice.

Biomechanical investigation of thread designs and interface conditions of zirconia and titanium dental implants with bone: three-dimensional numeric analysis.

PURPOSE: Bone stress and interfacial sliding at the bone-implant interface (BII) were analyzed in zirconia and titanium implants with various thread designs and interface conditions (bonded BII and contact BIIs with different frictional coefficients) for both conventional and immediately loaded treatments. MATERIALS AND METHODS: A total of 18 finite element models comprising two implant materials (zirconia and titanium), three thread designs (different shapes and pitches), and three interface conditions (bonded and contact BIIs) were analyzed to assess the effects on bone stresses and on sliding at the BII. The material properties of the bone model were anisotropic, and a lateral force of 130 N was applied as the loading condition. RESULTS: In the immediately loaded implant, the stress was highly concentrated at one site of the peri-implant bone. The peak bone stress was more than 20% lower in zirconia implants than in titanium implants for a bonded BII and 14% to 20% lower for a contact BII. The bone stresses did not differ significantly between implants with V-shaped threads and square threads. However, sliding at the BII was more than 25% lower with square-thread implants than with V-shaped-thread implants for titanium implants and 36% lower for zirconia implants. Reducing the thread size and pitch in cortical bone (via two V-shaped threads with different pitches) decreased the bone stress by 13%. Increasing the frictional coefficient reduced sliding at the BII in both zirconia and titanium implants. CONCLUSIONS: As an implant material, zirconia can reduce the bone stress in the crestal cortical region. Bone stress and sliding at the BII are heavily dependent on the thread design and the frictional coefficient at the BII of immediately loaded implants.

Microcomputed tomography analysis of particular autogenous bone graft in sinus augmentation at 5 months: differences on bone mineral density and 3D trabecular structure.

OBJECTIVES: This study investigated the effects of gender on the three-dimensional (3D) bone mineral density (BMD) and micromorphology of the trabeculae of matured autogenous bone grafts after sinus floor augmentation, and compared them to those of adjacent native bone. MATERIALS AND METHODS: Ten bone biopsy samples were removed from the implant placement areas of patients who had received second-stage sinus floor augmentation, and analyzed by microcomputed tomography. BMD phantoms with two calcium hydroxyapatite densities (0.25 and 0.75 g/cm(3)) were used to determine the BMD of the grafted and native bone samples. The 3D structural parameters of the trabeculae, including percentage of bone volume (bone volume/tissue volume, BV/TV), trabecular thickness (Tb.Th), trabecular number, trabecular separation, trabecular pattern factor (Tb.Pf), and structure model index, were analyzed between males and females and between grafted bone and native bone. RESULTS: No significant gender-specific differences in BMD and 3D trabecular structure of either native or grafted bone were found (P > 0.05). Compared to the adjacent native bone, the autogenous grafted bone exhibited lower BV/TV and Tb.Th as well as a higher Tb.Pf (P < 0.05). Additionally, there was a weak positive correlation between the Tb.Th values of grafted and native bone (R (2) = 0.58). CONCLUSIONS: In the maxillary sinus, autogenous grafted bone exhibited lower BV/TV, Tb.Th, and trabecular connectivity than the adjacent native bone. No significant gender-specific differences were found for either the BMD or 3D trabecular structure of grafted bone. CLINICAL RELEVANCE: After bone remodeling, autogenous grafted bone revealed different 3D trabecular structure as compared to native bone.

Predicting cortical bone strength from DXA and dental cone-beam CT.

OBJECTIVE: This study compared the capabilities of dual-energy X-ray absorptiometry (DXA) and dental cone-beam computed tomography (CBCT) for predicting the cortical bone strength of rat femurs and tibias. MATERIALS AND METHODS: Specimens of femurs and tibias obtained from 14 rats were first scanned with DXA to obtain the areal bone mineral density (BMD) of the midshaft cortical portion of the bones. The bones were then scanned using dental CBCT to measure the volumetric cortical bone mineral density (vCtBMD) and the cross-sectional moment of inertia (CSMI) for calculating the bone strength index (BSI). A three-point bending test was conducted to measure the fracture load of each femur and tibia. Bivariate linear Pearson analysis was used to calculate the correlation coefficients (r values) among the CBCT measurements, DXA measurements, and three-point bending parameters. RESULTS: The correlation coefficients for the associations of the fracture load with areal BMD (measured using DXA), vCtBMD (measured using CBCT), CSMI (measured using CBCT), and BSI were 0.585 (p = 0.028) and 0.532 (p = 0.050) (for the femur and tibia, respectively), 0.638 (p = 0.014) and 0.762 (p = 0.002), 0.778 (p = 0.001) and 0.792 (p<0.001), and 0.822 (p<0.001) and 0.842 (p<0.001), respectively. CONCLUSIONS: CBCT was found to be superior to DXA for predicting cortical bone fracture loads in rat femurs and tibias. The BSI, which is a combined index of densitometric and geometric parameters, was especially useful. Further clinical studies are needed to validate the predictive value of BSI obtained from CBCT and should include testing on human cadaver specimens.

Incidence and clinical significance of zygomaticomaxillary complex fracture involving the temporomandibular joint with emphasis on trismus.

Trismus is frequently a sequel of temporomandibular joint (TMJ) involvement in a zygomaticomaxillary complex (ZMC) fracture. Although trismus is commonly observed in patients with ZMC fracture, continuous follow-up examinations of their degree of mouth opening have rarely been documented. The aim of this retrospective study was to determine the incidence and clinical significance of ZMC fracture involving the glenoid fossa or articular eminence of the TMJ with an emphasis on trismus. The medical and computed tomography (CT) imaging data of 28 patients with ZMC fracture treated by oral and maxillofacial surgeons (OMFSs) (OMFS group) and 174 patients with ZMC fracture treated by surgeons other than OMFSs (non-OMFS group) between May 2002 and May 2006 were reviewed. Maximal interincisal opening (MIO) less than 35 mm or three-finger width was considered limited mouth opening and indicative of trismus. Preoperative CT imaging data indicated that about 64% (18/28) and 50% (87/174) of the patients in the OMFS and non-OMFS groups, respectively, had a ZMC fracture involving the TMJ. Among these OMFS patients, 17 (94.40%) patients had limited mouth opening (MIO range, 7-33 mm) preoperatively, which improved markedly postoperatively. Among the non-OMFS patients with such fractures, 42 (48.3%) patients had trismus preoperatively and two retained trismus postoperatively. Lack of proper preoperative CT images, inadequate postoperative follow-up protocol, and/or neglect by patients and medical staff could influence the outcomes of ZMC fracture involving the TMJ. We make recommendations for reducing the risk of complications subsequent to ZMC fracture involving the TMJ.

Three-dimensional bone structure and bone mineral density evaluations of autogenous bone graft after sinus augmentation: a microcomputed tomography analysis.

OBJECTIVE: The purpose of this study was to determine the relationships and differences in three-dimensional (3D) bone mineral density (BMD) and microtrabecular structures between autogenous bone grafts and their adjacent native bone after a healing period following maxillary sinus augmentation. MATERIALS AND METHODS: Nine rod-shaped human bone biopsy samples were taken from patients receiving two-stage sinus augmentation therapy in implantation areas and analyzed using microcomputed tomography (micro-CT). Before micro-CT scanning, two BMD phantoms were placed near to the bone biopsy samples for executing BMD calculations of the grafted and native bone samples. In addition, 3D structural parameters of the trabeculae were analyzed for both the grafted and native bone, including percentage of bone volume [bone volume (BV)/tissue volume (TV)], bone-specific surface [bone surface (BS)/BV], trabecular thickness (Tb.Th), trabecular number (Tb.N), trabecular separation (Tb.Sp), trabecular pattern factor (Tb.Pf), and structure model index (SMI). RESULTS: No significant correlations with regard to BMD and trabecular-structure parameters were found between native bone and grafted bone; however, BS/BV and Tb.Pf were higher and Tb.Th and Tb.Sp were 37.35% and 12.74% lower in grafted bone than in native bone. For grafted bone, there were significant correlations (P < 0.05) between BMD and BV/TV, and Tb.N. CONCLUSIONS: When using autogenous bone as a graft material, BMD and micromorphological conditions of grafted bone were not influenced by the condition of the native bone in the maxilla. Differences were found in surface complexity, trabecular thickness, trabecular separation, and the connectivity of trabeculae between grafted and native bone. The BMD in grafted bone was affected by the quantity of the trabeculae.

Biomechanical simulation of various surface roughnesses and geometric designs on an immediately loaded dental implant.

Experiment with rapid prototyping technique and validation finite element model was performed to evaluate the biomechanical behavior of an immediately loaded mandibular implant. Also, 18 finite element models of six implant designs and three surface roughnesses with anisotropic bone material properties were analyzed to compare the bone stresses and the sliding at the bone-implant interface under a vertical or lateral force of 130N. The results show that bone stress (strain) of an immediately loaded implant is heavily dependent on the implant design and surface roughness. Improving the initial interfacial interlocking using a threaded implant has a higher priority than using cylindrical or step designs with a rough surface for an immediately loaded implant.

Effects of splinted prosthesis supported a wide implant or two implants: a three-dimensional finite element analysis.

OBJECTIVES: Three-dimensional finite element (FE) models of splinted prosthetic crowns were studied and stress analyses were evaluated with different types of implant support, including standard, wide or two implant(s) for partial, posterior edentulous restorations. MATERIAL AND METHODS: The FE models were constructed based on a cadaver mandible containing the 2nd premolar and the 1st molar. The crowns of these two teeth were modeled as connected and disconnected to mimic the splinted and non-splinted designs, respectively. One standard implant was placed at the premolar region, while three types of implant support, one at a time (the standard implant, wide implant and two implants), were used to support the molar crown. A 100 N oblique load was applied to the buccal cusp on each crown. The FE simulation was validated experimentally via strain gauge measurement. RESULTS: The experimental data were well correlated with the FE predictions (r(2)=0.97). When compared with the standard implant used in the molar area, the wide implant and two implants reduced the peak stress in crestal bone by 29-37% for both splinted and non-splinted cases. Inserting the standard implant into both the premolar and molar area, the bone stresses were identical for splinted and non-splinted designs. However, splinting the adjacent crowns has shown to decrease the bone stresses at the premolar region by 25%, while the wide implant or two implants were placed at the molar region. CONCLUSION: The biomechanical advantages of using the wide implant or two implants are almost identical. The benefit of load sharing by the splinted crowns is notable only when the implants on the premolar and molar regions have different supporting ability.