Boosting Osmotic Energy Harvesting from Organic Solutions by Ultrathin Covalent Organic Framework Membranes.

Extracting osmotic energy from waste organic solutions via reverse electrodialysis represents a promising approach to reuse such industrial wastes and helps to mitigate the ever-growing energy needs. Herein, a molecularly thin membrane of covalent organic frameworks is engineered via interfacial polymerization to investigate its ion transport behavior in organic solutions. Interestingly, a significant deviation from linearity between ion conductance and reciprocal viscosity is observed, attributed to the nanoscale confinement effect on intermolecular interactions. This finding suggests a potential strategy to modulate the influence of apprarent viscosity on transmembrane transport. The osmotic energy harvesting of the ultrathin membrane in organic systems was studied, achieving an unprecedented output power density of over 84.5 W m-2 at a 1000-fold salinity gradient with a benign conversion efficiency and excellent stability. These findings provide a meaningful stepping stone for future studies seeking to fully leverage the potentials of organic systems in energy harvesting applications.

Superstructured Optoionic Heterojunctions for Promoting Ion Pumping Inspired by Photoreceptor Cells.

Photoreceptor cells of vertebrates feature ultrastructural membranes interspersed with abundant photosensitive ion pumps to boost signal generation and realize high gain in dim light. In light of this, superstructured optoionic heterojunctions (SSOHs) with cation-selective nanochannels are developed for manipulating photo-driven ion pumping. A template-directed bottom-up strategy is adopted to sequentially assemble graphene oxide (GO) and PEDOT:PSS into heterogeneous membranes with sculptured superstructures, which feature programmable variation in membrane topography and contain a donor-acceptor interface capable of maintaining electron-hole separation upon photoillumination. Such elaborate design endows SSOHs with a much higher magnitude of photo-driven ion flux against a concentration gradient in contrast to conventional optoionic membranes with planar configuration. This can be ascribed to the buildup of an enhanced transmembrane potential owing to the effective separation of photogenerated carriers at the heterojunction interface and the increase of energy input from photoillumination due to a synergistic effect of reflection reduction, broad-angle absorption, and wide-waveband absorption. This work unlocks the significance of membrane topographies in photo-driven transmembrane transportation and proposes such a universal prototype that could be extended to other optoionic membranes to develop high-performance artificial ion pumps for energy conversion and sensing.

Microporous Polyelectrolyte Complexes by Hydroplastic Foaming.

Polyelectrolyte complexes (PECs) have emerged as an attractive category of materials for their water processability and some similarities to natural biopolymers. Herein, we employ the intrinsic hydroplasticity of PEC materials to enable the generation of porous structures with the aid of gas foaming. Such foamable materials are fabricated by simply mixing polycation, polyanion, and a UV-initiated chemical foaming agent in an aqueous solution, followed by molding into thin films. The gas foaming of the PEC films can be achieved upon exposure to UV illumination under water, where the films are plasticized and the gaseous products from the photolysis of foaming agents afford the formation, expanding, and merging of numerous bubbles. The porosity and morphology of the resulting porous films can be customized by tuning film composition, foaming conditions, and especially the degree of plasticizing effect, illustrating the high flexibility of this hydroplastic foaming method. Due to the rapid initiation of gas foaming, the present method enables the formation of porous structures via an instant one-step process, much more efficient than those existing strategies for porous PEC materials. More importantly, such a pore-forming mechanism might be extended to other hydroplastic materials (e.g., biopolymers) and help to yield hydroplasticity-based processing strategies.

Two-Dimensional Nanofluidic Membranes with Intercalated In-Plane Shortcuts for High-Performance Blue Energy Harvesting.

Two-dimensional nanofluidic membranes offer great opportunities for developing efficient and robust devices for ionic/water-nexus energy harvesting. However, low counterion concentration and long pathway through limited ionic flux restrict their output performance. Herein, it is demonstrated that rapid diffusion kinetics can be realized in two-dimensional nanofluidic membranes by introducing in-plane holes across nanosheets, which not only increase counterion concentration but also shorten pathway length through the membranes. Thus, the holey membranes exhibited an enhanced performance relative to the pristine ones in terms of osmotic energy conversion. In particular, a biomimetic multilayered membrane sequentially assembled from pristine and holey sections offers an optimized combination of selectivity and permeability, therefore generating a power density up to 6.78 W m-2 by mixing seawater and river water, superior to the majority of the state-of-the-art lamellar nanofluidic membranes. This work highlights the importance of channel morphologies and presents a general strategy for effectively improving ion transport through lamellar membranes for high-performance nanofluidic devices.

Engineering Polymeric Nanofluidic Membranes for Efficient Ionic Transport: Biomimetic Design, Material Construction, and Advanced Functionalities.

Design elements extracted from biological ion channels guide the engineering of artificial nanofluidic membranes for efficient ionic transport and spawn biomimetic devices with great potential in many cutting-edge areas. In this context, polymeric nanofluidic membranes can be especially attractive because of their inherent flexibility and benign processability, which facilitate massive fabrication and facile device integration for large-scale applications. Herein, the state-of-the-art achievements of polymeric nanofluidic membranes are systematically summarized. Theoretical fundamentals underlying both biological and synthetic ion channels are introduced. The advances of engineering polymeric nanofluidic membranes are then detailed from aspects of structural design, material construction, and chemical functionalization, emphasizing their broad chemical and reticular/topological variety as well as considerable property tunability. After that, this Review expands on examples of evolving these polymeric membranes into macroscopic devices and their potentials in addressing compelling issues in energy conversion and storage systems where efficient ion transport is highly desirable. Finally, a brief outlook on possible future developments in this field is provided.

Quenching the Macroporous Collapse of Polyelectrolyte Multilayer Films for Repeated Drug Loading.

Macroporous structures can be developed within polyelectrolyte multilayer films for efficient drug loading, but these structures tend to collapse or fracture during conventional drying procedures. Herein, a facile dehydrating method for macroporous polyelectrolyte multilayer films is proposed using solvent exchange to ethanol and then spontaneous evaporation. During these processes, the collapse of the macroporous structures can be effectively avoided, which can be ascribed to a combined effect of two factors. On one hand, capillary pressure during ethanol evaporation is relatively small since the surface tension of ethanol is much lower than that of water. On the other hand, solvent exchange suppresses the interdiffusion of polyelectrolytes and substantially increases the mechanical strength of the macroporous films, more than three orders of magnitude, making the pore walls highly tolerant of the capillary pressure. The stability of macroporous polyelectrolyte films to ethanol enables the repeated wicking from the ethanol solution of drugs, leading to a higher loading beyond previous studies. Such a high loading is favorable for the long-term release of drugs from the surfaces of modified substrates and maintaining a local drug concentration above the minimum effective concentration.

Dynamic Porous Pattern through Controlling Noncovalent Interactions in Polyelectrolyte Film for Sequential and Regional Encapsulation.

Inspired by nature, many functional surfaces have been developed with special structures in biology, chemistry, and materials. Many research studies have been focused on the preparation of surfaces with static structure. Achieving dynamical manipulation of surface structure is desired but still a great challenge. Herein, a polyelectrolyte film capable of regional and reversible changes in the microporous structure is presented. Our proposal is based on the combination of azobenzene (Azo) π-π stacking and electrostatic interaction, which could be affected respectively by ultraviolet (UV) irradiation and water plasticization, to tune the mobility of polyelectrolyte chains. The porous patterns can be obtained after regional ultraviolet irradiation and acid treatment. Owing to the reversibility of Azo π-π stacking and electrostatic interaction, the patterns can be repeatedly created and erased in the polyelectrolyte film made by layer-by-layer (LbL) self-assembly of poly(ethyleneimine)-azo and poly(acrylic acid). Furthermore, through two rounds of porous pattern formation and erasure, different functional species can be loaded separately and confined regionally within the film, showing potential applications in the functional surface. This work highlights the coordination of two noncovalent interactions in thin films for regional and reversible controlling its structure, opening a window for more in-depth development of functional surfaces.

Humidity-Triggered Relaxation of Polyelectrolyte Complexes as a Robust Approach to Generate Extracellular Matrix Biomimetic Films.

Generating a biofunctional film that can mimic the extracellular matrix (ECM) in an efficient and robust technique that may have great potential for medical devices, tissue engineering, and regenerative medicines. Herein, a facile approach to generate ECM biomimetic films based on the humidity-triggered relaxation of polyelectrolyte complex (PEC) nanoparticles is reported. The poly(l-lysine) and hyaluronan are precomplexed and sprayed onto a substrate, which, via a trigger of vaporous water, can be transformed into an even and stable film. The spontaneous polymer chain interfusion (diffusion coefficient ≈1.01 × 10-9  cm2  s-1 ) under saturated humidity, allowing for the rapid reorganization (within 30 min) of film morphology and structure is demonstrated. A controllable and scalable way for the loading of diversified bioactive agents, as well as on-demand modulation of stiffness is further presented. Moreover, the high-throughput arrays and programmed patterns can be easily completed, suggesting huge potentials that surpass those of state-of-the-art methods. Combined with high efficiency and flexible functionalization, it is believed that this approach should be beneficial for extending the practical applications of PEC films, such as medical implants, chip detectors, and so on.

Controlling Structural Transformation of Polyelectrolyte Films for Spatially Encapsulating Functional Species.

Although many approaches have been developed to encapsulate functional species into polyelectrolyte films, few of them can effectively control the final distribution of these ones. Herein, a facile strategy is proposed to spatially control the encapsulation of guest species by locally regulating the structural transformation of polyelectrolyte films. Patterned porosity is created within a film by cross-linking it selectively and then immersing it in an acidic solution. These porous regions can exhibit significantly different properties from other regions, including the ability to wick solution, a greater retention of guest species, and the capability of structural transformation. After loading guest species, the porous structures can be eliminated at saturated humidity to encapsulate the guest species into the film, leading to their patterned distribution across the film. Based on this method, various guest species, ranging from fluorescent dyes to nanoparticles, can be locally encapsulated into polyelectrolyte film, forming distinct patterns of arbitrary shapes and sizes and thus paving the way for further applications.

Thermo-triggered ultrafast self-healing of microporous coating for on-demand encapsulation of biomacromolecules.

Medical coatings cooperated with biomacromolecules can regulate biological events and tissue responses, thus increasing medical implant longevity and providing improved and/or new therapeutic functions. In particular, medical coatings, which can load the correct species and doses of biomacromolecules according to individual diagnoses, will significantly optimize treatment effects and satisfy the rising clinical need of "precision medicine". Herein, we report on a dynamic microporous coating with an ultrafast self-healing property to fulfill the "load-and-play" concept for "precision medicine". A structure-switchable coating based on poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) triblock copolymer network is constructed. The coating can be switched to microporous morphology via a water swelling and freeze-drying process. Then, through a mild thermo-trigger as low as 40 °C, this spongy coating can undergo self-healing to switch back to a pore-free structure within minutes to even 5 s. Based on this dynamic coating, we suggest a simple and versatile method to encapsulate biomacromolecules for surface-mediated delivery. The ultrafast self-healing of the microporous structure enables uniform incorporation of biomacromolecules with an easily achieved high loading of albumin of 16.3 µg/cm2 within 1 min. More importantly, controllable encapsulation can be realized by simple control of the concentration of the loading solution. We further demonstrate that the encapsulated biomacromolecules retained their bioactivity. This work may benefit clinicians with flexibility to provide personalized medical coatings for individual patients during treatment.

Surface-Mediated Stimuli-Responsive Gene Delivery Based on Breath Figure Film Combined with Matrix Metalloproteinase-Sensitive Hydrogel.

Surface-mediated gene delivery appears to be potential gene delivery modes for various applications. Still, controlled and smart delivery manners are required especially considering the need for gene therapy to deliver gene with selectivity. A surface that can effectively payload DNA, promote cell adhesion, and stimuli response is an important prerequisite. Here, we report a matrix metalloproteinase (MMP)-responsive surface-mediated gene delivery system by combining MMP-degradable hydrogel with a breath figure (BF) porous film. The MMP-degradable hydrogel containing plasmid DNA was loaded into the surface pores of the BF film as DNA reservoirs. The upper surface without hydrogel on the BF film served as footholds of integrin adhesions. MMP is one of the important endogenous signals in tumor-related pathologic changes, and MMP expressions in cancer cells are significantly higher than those in normal cells. Consequently, our surface-mediated gene delivery locally and rapidly released the payload DNA in response to cancer cells and transfected them. This work highlights the importance of the combination of stimuli-response and surface-mediated gene delivery to functional materials, showing good potential applications in the field of gene therapy.

Self-Healing Label Materials Based on Photo-Cross-Linkable Polymeric Films with Dynamic Surface Structures.

Spatially controlling the evolution of surface structures may provide an effective strategy for patterning surface roughness and facilitating the construction of various functional surfaces. In this study, we report a photo-cross-linkable polymeric film with dynamic surface micro/nanostructures. The surface structures of the un-cross-linked regions can be eliminated under saturated humidity, which can be utilized to create patterned roughness on the film. One potential application of this patternable platform is as a "smart" label material for graphical symbols. Various graphical symbols can be programmed onto this film by partially erasing its surface roughness, enabling visibility due to the difference in light scattering between different areas of the film. When a thus-prepared label was blurred by mechanical scratches, it could be healed under saturated humidity, and its original readability could be fully restored. Furthermore, the patterned rough surface created using our approach can also be very useful in many other research fields, such as surface wettability and cell behavior manipulation.

Bactericidal and Hemocompatible Coating via the Mixed-Charged Copolymer.

Cationic antibacterial coating based on quaternary ammonium compounds, with an efficient and broad spectrum bactericidal property, has been widely used in various fields. However, the high density of positive charges tends to induce weak hemocompatibility, which hinders the application of the cationic antibacterial coating in blood-contacting devices and implants. It has been reported that a negatively charged surface can reduce blood coagulation, showing improved hemocompatibility. Here, we describe a strategy to combine the cationic and anionic groups by using mixed-charged copolymers. The copolymers of poly (quaternized vinyl pyridine- co- n-butyl methacrylate- co-methacrylate acid) [P(QVP- co- nBMA- co-MAA)] were synthesized through free radical copolymerization. The cationic group of QVP, the anionic group of MAA, and the hydrophobic group of nBMA were designed to provide bactericidal capability, hemocompatibility, and coating stability, respectively. Our findings show that the hydrophilicity of the copolymer coating increased, and its zeta potential decreased from positive charge to negative charge with the increase of the anionic/cationic ratio. Meanwhile, the bactericidal property of the copolymer coating was kept around a similar level compared with the pure quaternary ammonium copolymer coating. Furthermore, the coagulation time, platelet adhesion, and hemolysis tests revealed that the hemocompatibility of the copolymer coating improved with the addition of the anionic group. The mixed-charged copolymer combined both bactericidal property and hemocompatibility and has a promising potential in blood-contacting antibacterial devices and implants.

Infusing Lubricant onto Erasable Microstructured Surfaces toward Guided Sliding of Liquid Droplets.

Introducing a lubricant layer onto surfaces has emerged as a novel strategy to address a wide range of interface-related challenges. Recent studies of lubricant-infused surfaces have extended beyond repelling liquids to manipulating the mobility of fluids. In this study, we report a design of slippery surfaces based on infusing lubricant onto a polyelectrolyte multilayer film whose surface microstructures can be erased rapidly under mild condition. Unlike other lubricant-infused surfaces, the liquid movements (e.g., moving resistance and direction) on such surfaces can be manipulated via programming the surface microstructures beforehand. The work reported here offers a versatile design concept of lubricant-infused surfaces and may turn on new applications of this emerging class of bioinspired materials.

Self-wrinkling polyelectrolyte multilayers: construction, smoothing and the underlying mechanism.

Introducing wrinkling or rough features into substrates is of great practical significance to construct various functional surfaces. Due to the sensitivity of assembled units towards environmental stimuli, the internals of layer-by-layer films can be readily adjusted to generate various micro- and nanostructures. We previously described a self-roughening polyelectrolyte multilayer (PEM) to facilitate the introduction of surface microstructures. In the present work, the growth process of PEI/PAA multilayer films was investigated and the mean size of the surface microstructures was found to increase linearly with the film thickness. The spontaneous formation of these surface features can be attributed to swelling-induced film deformation during the assembling process, which is similar to the surface wrinkling of hydrogels undergoing a volume phase transition. When exposed to saturated humidity, the internal stress as well as the surface microstructures can be diminished spontaneously, leading to a flat surface over the substrates. Given the effect of the underlying film thickness on the characteristic wavelength of the surface wrinkles, multiscale surface microstructures can be readily realized by means of spatially presetting the distribution of the film thickness.

Self-Healing Spongy Coating for Drug "Cocktail" Delivery.

Optimized ratio in the codelivery of therapeutics is of crucial importance to promote the synergism rather than the antagonistic effects. In this study, a self-healing spongy coating was described to facilitate the surface-mediated delivery of drug "cocktails" proportionally. The formation of spongy structures within the coating was achieved by acidic treatment and freeze-drying. Various drug combinations can be readily integrated through wicking method and subsequent micropore self-healing. The ratio of drug loading can be precisely regulated by the composition of loading solution and the embedded drugs were released in proportion according to the initial ratio of drug combination.

Dynamic spongy films to immobilize hydrophobic antimicrobial peptides for self-healing bactericidal coating.

A constant increase of nosocomial infections that are caused by adhesion and colonization of pathogenic microorganisms, especially drug-resistant bacteria, on the surfaces of healthcare devices has received considerable attention worldwide. In this study, bioinspired by antimicrobial skins of natural living beings, we developed a self-healing bactericidal coating through the immobilization of hydrophobic antimicrobial peptides (AMPs) into a multilayer film, which was constructed through the enhanced exponential layer-by-layer assembly of polyethylenimine (PEI) and poly(acrylic acid) (PAA). The (PEI/PAA) film shows particular dynamic properties from the as-prepared thin solid film to a spongy microporous structure via acid solution treatment, and then back to the thin solid film by eliminating micropores via the treatment of saturated humidity. Consequently, the loading and integration of hydrophobic AMPs such as gramicidin A (GA) into the (PEI/PAA) film were achieved via simple wicking action with GA solution and subsequent humidity treatment, respectively. The GA loading densities can be precisely controlled by using different concentrations of GA solution. We demonstrated that the GA immobilized (PEI/PAA) film has rapid self-healing properties, and that Gram-positive bacteria S. aureus including the methicillin-resistant type were efficiently killed through the contact-killing mode. Collectively, this self-healing bactericidal coating shows practical potential in a variety of healthcare applications.

Surface modulation of complex stiffness via layer-by-layer assembly as a facile strategy for selective cell adhesion.

In-stent restenosis and thrombosis are the main severe problems that occur after the percutaneous vascular intervention. The competition between endothelial cells (ECs) and smooth muscle cells (SMCs) plays a key role during these pathological changes. The regulation of this competition offers new opportunities to design biomaterials in the cardiovascular fields. Bioactive molecules have been typically employed to increase EC adhesion and thereafter to enhance EC competitiveness; however, this method is associated with limitations from the point of view of practical and industrial applications. Herein, we present an approach to enhance EC competitiveness over that of SMC through the selective EC adhesion, which is achieved by modulating a complex surface stiffness based on the technique of layer-by-layer (LbL) assembly. This complex stiffness can be achieved by regulating the thickness of multilayer films coordinating with a rigid underlying substrate. The selective cell adhesion is attributed to changes in the complex surface stiffness and a different intrinsic property between ECs and SMCs. This study provides a facile and broadly applicable approach for the purpose of the enhancement of EC competitiveness over that of SMC, which has great potential for the development of cell-based functional biomaterials in the cardiovascular field.

Cucurbit[8]uril-based stimuli-responsive films as a sacrificial layer for preparation of free-standing thin films.

A pseudo-polycation was prepared based on the supramolecular cucurbit[8]uril ternary complex. It was then layer-by-layer assembled with poly(acrylic acid) to fabricate a stimuli-responsive film, which exhibited disassembly properties in response to stimuli, providing a supramolecular route for the fabrication of free-standing thin films.